Cisco ISA disable antivirus for the specified area

Similar Questions

• all rows in the table are not eligible for the specified partition

  SQL > Alter Table ABC
  Exchange 2 Partition P1 with Table XYZ;
  
  Modified table.
  
  SQL > Alter Table ABC
  Exchange 2 Partition P2 with Table XYZ;
  
  
  P2 Partition Exchange with XYZ Table
  *
  ERROR on line 2:
  ORA-14099: all rows in the table are not eligible for the specified partition
  
  The exchange partition works fine for the first time. However, if we try to swap the 2nd partition it gives the error.
  How to solve this error?
  How can I find the lines which are not qualified for a specific part. is there a query to find out the same thing?

  >
  Well, exchange of syntax and logic is not clearly as it should (IMHO). There is no element of syntax that tells Oracle we want to Exchange partition data in a table that is not partitioned or not partitioned into partition table data.
  >
  What? Not sure where you got that but maybe it was before you had first cup of coffee? ;)

  An "Exchange", it's just that; an Exchange. Partition data end up in the non-partitioned table and vice versa. It is meaningless and totally obsolete if "we want Exchange partition data in a table that is not partitioned or not partitioned into partition table data".
  >
  It was decided by Oracle not partitioned table control. If the non-partitioned table is empty, it means you want to Exchange data partition in a non-partitioned table. And if not partitioned table is not empty, it means you want to Exchange data in the table that is not partitioned into partition.
  >
  There is no decision to make. The segments are swapped. Oracle doesn't check, know or even care if one or the other or both segments are empty. 'Control' which is carried out (by default except if NO CONTROL is used) only consists of ensuring all the data in the segment intended for the partition belongs to this partition.

  It is what gives the example of John. This can NEVER work if table1 is empty unless p1 is empty at the beginning:
  1 Exchange p1 with table1
  2 Exchange p2 with table1

  As John explains, assuming that no other operations are trying to put the data from p1 P2 which is not possible if p1 actually contains data.

  You can save it for next April 1!

• ORA-01839: invalid date for the specified month

  Hello
  
  I don't know if this is the right place for posting this... but I got the following errors in my alert log file (10.2.0.1)
  
  Errors in the fichier.../bdump/xxx_j000_23928.trc
  ORA-12012: error on auto work 8888
  ORA-01839: invalid date for the specified month
  
  in the trace file:
  NAME OF THE ACTION: (AUTO_SPACE_ADVISORY_JOB) 2009-03-30 22:00:02.313
  NAME OF THE MODULE: (DBMS_SCHEDULER) 2009-03-30 22:00:02.313
  SERVICE NAME: (SYS$ USERS) 2009-03-30 22:00:02.313
  ID OF THE SESSION: (194,87) 2009-03-30 22:00:02.313
  2009-03-30 22:00:02.313
  ORA-12012: error on auto work 8888
  ORA-01839: invalid date for the specified month
  
  The problem is the date is not valid for the specified month, my question is how do I solve this problem. This is a newly created database.
  
  I have only 2 jobs (some from dba_jobs) and there is no 8888.
  
  2 jobs I have are:
  
  THE WORK INTERVAL WHICH
  1 + 1/240 sysdate unlock;
  trunc (sysdate) 2 + 7 + 3/24 dbms_stats.gather_schema_stats ('db_name');
  
  
  Please help. Thank you.
  
  Published by: user10427867 on March 31, 2009 12:00

  The work is probably assigned a group of windows, probably MAINTENANCE_WINDOW_GROUP. The task will run in this window. Try these queries.

  select schedule_name
  from dba_scheduler_jobs
  where job_name = 'AUTO_SPACE_ADVISOR_JOB';
  
  select next_start_date
  from dba_scheduler_window_groups
  where window_group_name = 'MAINTENANCE_WINDOW_GROUP';  -- or the value returned by the first query if different
  

  Since it is a work of Oracle supplied, I recommend you contact Oracle support. The trace file contains other useful information?

• laptop for the mining area

  What is the best laptop for the mining area?

  Ask the mining company.

• How to disable IPV6 for the LOOPBACK address in windows vista

  Hi all

  I have problems in ASP.NET when running any site due to IPV6 alias for the loopback address

  So I need to know how to disable IPV6 for the LOOPBACK address in windows vista

  Help, please

  http://www.lboro.AC.UK/it/Vista/IPv6.html

  There is a record for this difficulty to the bottom of the page above for Tunnel and loopback interfaces...

• FDM - a script engine for the specified language cannot be created.

  Hello

  When I try to log into the application of FDM, I get the error message below. FDM - 11.1.1.3 application version. I restarted all services and tried to log in again. But getting same error message.  It was working fine before. Please could you help me solve the problem.

  "Error: an error occurred in the logging on the system." -A script engine for the specified language cannot be created. »

  Thank you

  Michel K

  Your vbscript.dll is corrupt. Replace with a good copy and register again via cmd regsvr32.

• Active Services Web Directory has encountered an error when reading the parameters for the specified Active Directory Lightweight Directory Services instance

  VCenter Server 4.1, I installed it on a physical machine. This is the error message that appears whenever I try to follow what is happening every 1 min event viewer.

  Error:

  role for users: log name: Active Directory Web Services

  Source: ADWS

  Date: 2010-07-28 15:55:21

  Event ID: 1209

  Task category: Instance ADWS events

  Level: WARNING

  Keywords: Classic

  User: n/a

  Computer: wwubmw.williamwoods.local

  Description:

  Services Web Active Directory encountered an error when reading the parameters for the specified Active Directory Lightweight Directory Services instance.  Services Web Active Directory will try again this operation regularly.  At the same time, this body will be ignored.

  Instance name: ADAM_VMwareVCMSDS

  The event XML:

  The OS is Windows 2008 R2. What should I do to solve the problem.

  Thanks for the reference Troy

  If you have found this or other useful information, please consider awarding points to 'Correct' or 'useful '.

  Gregg Robertson, VCP3, 4, MCSE, MCSA, MCTS, MCITP

• VixDiskLib_Cleanup always returns vixError (6) - the operation is not supported for the specified parameters

  Any ideas how we can determine what parameters it dislikes?  I am the appellant after VixDiskLib_Disconnect as recomment docs and using the same connection params struct I used with VixDiskLib_ConnectEx.

  Thank you

  -Ron

  UInt32 numCleanedUp = 0, numRemaining = 0;

  /= VDDK 1.1 header says connection spec should be null =/.

  connectParamsP - & gt; vmxSpec = (char *) NULL;

  vixError = VixDiskLib_Cleanup (connectParamsP, & numCleanedUp, & numRemaining);

  vixError (6) - the operation is not supported for the specified parameters

  Ron,

  I think that your connection is probably not use all transport advanced, in which case _Cleanup does nothing. If you connect without using advanced transport, cleaning returns 6 - there is nothing to clean up.

  Thank you

  Annick

• Gets the error in Windows Denfender for "the specified service does not exist as an installed device (error Code: 0 x 80070424).

  My computer was slow, so I tried to scan all using Windows Defender, and this error message keeps popping up, "the specified service does not exist as an installed device (error Code: 0 x 80070424) I don't know how fx this.» I' of love too see if there is another reliable computer, free softwear that can scan and virus scanning spywear.

  Hello

  Windows Defender is an antispyware software, not an Antivirus.

  If you use Norton, AVG, Avira, Microsoft Security Essentials, McAfee, etc. the default action is for Windows Defender must be disabled, that these AntiVirus programs have their own Antispyware Applications.

  There is nothing to worry.

  Using both programs at the same time can cause system conflicts, etc.

  If you are using one of the above AntiVirus programs, this Information from David O - Support Engineer shows you how to manually enable Windows Defender (disregard information from uninstalling; not possible in Vista):

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/how-do-i-manually-start-Windows-Defender-in-Vista/dab845b2-9ba5-47F3-9518-c4c6781e7d5b

  "Go to start, Control Panel, Administrative Tools, Services. Look for Windows Defender.

  Right click and select Properties , ensure that Startup Type is automatic.

  Once modified, click apply and OK.

  Quit and restart your computer. Check the back take the same path to confirm that Windows Defender has started"

  .

  And for now, change startup Vista programs without using Defender, use one of these methods:

  "How to use MSCONFIG in Windows Vista"

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  Or the program Autoruns for FREE:

  "V11.21 Autoruns for Windows"

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And try this method for the analysis of Malware

  Scan of Malware in Safe Mode with network.

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Once in Safe Mode with network, download and run RKill.

  RKill does NOT remove the malware; It stops the Malware process that gives you a chance to remove it with your security programs.

  http://www.bleepingcomputer.com/download/rkill/

  Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  See you soon.

• Configure Manager node for the two areas in weblogic

  Hi friends,

  I'm kinda new to weblogic. I need help to configure nodemanager to two areas.

  I created two areas

  1 Classicdomain

  2 RPMdomain

  For classic field, I created the machine and all the server has added to this machine.

  MachineName: localmachine

  Port: 5556

  Plain

  For RPMdomain I created the machine with the same name and the port and all servers added to this machine.

  I registered both server using nmroll().

  First domain has been configured with nodemanager.

  In the second area, I am not able to start a stop managed server via the console.

  Could someone please let me know how to configure the nodemanager.

  Kind regards

  Prates

  Are able to launch those instances successfully from the command line using the command startManagedWeblogic.sh? Once you have started it, try stopping through the node Manager and then start it upward.

  Also, do you have JSSE enabled in your case and/or disabled hostname verification? These errors indicate fundamentally flawed SSL handshakes with the node Manager.

• How to set up the generic dashboard for the specified virtual machines

  I have two question about "generic dashboard":

  1. I use the tag to classify certain virtual machines by role QA, DEV or PRD. If I select "Kind of resources", and then select all VM under a label, window "metrics selector" will be watch only "vCenter generated Operation Manager", it does not show metric VM. How can I see it?

  2. If I select the 'Resources' mode, then I'll be able to see the VM metrics on the window "metrics selector", but I must key in each VM name "Label to the area", it takes a lot of time if I have a lot of VM, is there no matter what symbol I can use to match this field with name column "resource"?

  Mode 'Resources like' or 'Resource', both ok for me, I want to just install a widget to display using the specified CPU VM real fast.

  Any information is appreciated!

  You will see that vC generated Ops metric because you are looking at the tag, which is a resourcekind. This switch of resources is "not" a filter label, these are the actual resources. If you want to see all the virtual machines, select the resourcekind 'virtual machine '.

  Generic dashboard is rarely used to show - all - kinds of resources, it is generally used for static selection for specific purposes. If you want to display all types of a resource type and apply a tag filter, you can select a different widget to display this information.

  There is no symbols that can act as wildcards, as you suggest. When you are 'kind of resources' mode, you need not fill out a label for the box.

• Containment for the toolbar area

  Hi all

  I use the Instrument of toolbar for the first time and I am not successfully keep the toolbar free of windows 'child '.

  I would like to have a toolbar in a parent window that isn't overlappable by a child window. In other words, I looking for a situation similar to CVI environment behaviuor, where the 'children' windows are blocked under the toolbar and have no chance to ride it.

  Any suggestion?

  Thank you

  Sergio

  The design of CVI IDE window is slightly different. In your case, you can restrict the panels of the child to hinder it in the parts of the toolbar in the recall of Panel, as follows:

  public static int CVICALLBACK ChildPanelCallback(int panel, int e, void *cb, int e1, int e2)
  {
  #define MY_TOOLBAR_HEIGHT 50
   
  If (e == EVENT_PANEL_MOVING | e == EVENT_PANEL_SIZING)
  {
  Rect r;
  GetPanelEventRect(e2, &r);)
  If (r.top<>
  {
  r.Top = MY_TOOLBAR_HEIGHT;
  SetPanelEventRect (e2, r);
  }
  }
  return 0;
  }

• Configuring the private network or disable questions for the network discovery in network and sharing Center.

  I just got my laptop all cleaned and had everything updated. When I got it back I was mainly concerned how my network and discovery sharing would work, because we never had a home computer and a laptop computer at a time. Our PC at home has always defined for a private network. Today, they are both defined for the private sector, the laptop will probably always be at home too, but I was curious to see how the printer share everything would work on my laptop. It would not print and I checked just the settings that the guy I of any program for me usually had the top settings. On my laptop that I was first checking out and the network discovery has been to custom on both, one on my PC was on, laptop has never been verified we or off, file sharing has been enabled on both. public folder sharing off on both, printer sharing turned off the PC at home, but on laptop, so much time, I guess me to turn on the PC I don't know yet. Printer password sharing is on the PC and laptop. I try essentially whether it is what you would call a custom setting make for a firewall setting, or could someone please just kinda tell me if the sharing of network discovery should be turned on on the laptop and the PC, or was it not suppose to be turned on to the laptop, but on the PC only? Which should be lit and which should not be enabled in the configuration of the private network? I just want to be able to print my laptop if I want to. Thank you

  [Moved from the community centre of Participation]

  Hello

  What version of Windows are you using?

  This article was written for the two Windows Vista & Windows 7.  Drop-down menu (right) allows you to activate Windows Vista Instructions.

  http://Windows.Microsoft.com/en-us/Windows/install-printer-home-network#1TC=Windows-7

• Is it possible to simply exchange the PSU 850w OEM for the inside area 51 R2 OEM 1500w PSU without the entire system rewired?

  I know as a rule of thumb, one should always use the cables provided with a power supply. However, considering that both the 850w & the 1500w are the two Dell OEM power supplies manufactured by the same company to meet identical specifications for the same system, are the cables between the two interchangeable?

  I am interested in buying for my R2 1500w PSU. However, rewiring the entire system seems too complicated. I know I'll bumble, especially since the case is divided and it is not possible to see clearly where all the cables.

  Thanks in advance for any help.

  Yes, but why pay for such a ugly piece of hardware? To replace Delta, PSU with an EVGA is so easy and is a better option. It takes literally 10 minutes to change

  Here is my page on the R2

  http://en.community.Dell.com/Owners-Club/Alienware/f/3746/t/19675279

• Publish with the ID of platform for the specified CPU in Regedit - NEED HELP

  Hello

  I bought a new HP Zbook G3 with windows 7 64 bit

  The question I have is registry picks up 32-bit like the platform ID even if the system is 64-bit.

  Run 64-bit programs works fine as long as I can install and this is where it happens the question.

  -Installation of 64-bit program works very well if its not programmed to a compability
  Search for drivers against the platform ID registers.
  -If it don't the recommended microsoft check platform Setup normally closes
  to get the information that the platform is a 32-bit system.

  I tried in vain to solutions:
  So far, I have tried to remove the ID platform manually, and then restart but it still captures platform as 32-bit default ID.
  I also tried to remove the platform ID and then replace it by manually creating platform ID REG_QWORD 0 x 00000040, always after that restart the platform ID is default back to 32-bit.

  Hello

  Thank you for visiting Microsoft Community.

  As I understand it, the problem with ID platform for the CPU indicated in regedit on the system.

  I certainly understand your concern and appreciate very much all your efforts to try to solve this problem.

  To get more information about it, we have a dedicated forum where these issues are dealt with and would be better suited to the TechNet community.

  Please visit the link below to find a community that will provide the best support.

  https://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  I hope this information is useful.

  Please let us know if you need more help, we will be happy to help you.

  Thank you.