Laptop HP 431 - deleted this partition containing the built-in operating system windows 7

Similar Questions

• I deleted this toolbar at the top of my computer.

  Original title: icon problem

  I have a window vista. I deleted this toolbar at the top of my computer. I don't know what it was called and I can't find it in the trash. You could scroll your mouse over it and was like icon painting, office microsoft, internet, media, etc and you can click on and it could pull up. I've lost.

  Hello

  This top toolbar is not a system owned by Vista software

  If you have a Dell computer or laptop it is part of the Dell software installation and it is called the Dell docking station.

  Look under all programs, and then under Dell software to make it download it from here:

  http://www.DellDock.com/

  PS Other manufacturers include similar options too, so if it is another manufacturer, ask them.

  See you soon.

• Clean? Windows 7 restarting on formatted drive, 100 MB Partition not allowed no previous operating system, after the attack of virus, it reach the wifi drivers to not load or display in the new operating system?

  Left attack virus serious that some files disabled in windows 7 (protected by Microsoft Security Essential) a program used on the computer was left partially disabled and I continue when using wireless internet. Reformatted drive leaving 100 MB Partition intact, created in new OS was an old file of Windows not wanted, impossible any attempt at the value of the days of updates, downloads & allowing also noticed wifi. Another reader reformat leaving 100 MB partition again not affected since the original OS. All programs loaded & all updates succeeded, but still did not have through any discussion read to get the computer to WiFi wifi as in Starbucks invites you to discover. I have another operating system on the computer that is able to discover drive internet wifi from loading with windows 7 so not a hardware problem, I think. Question is can a formatted drive on the left with its original partition of 100 MB OS questions with new reloaded windows 7 and is the new installation of the operating system clearly & repopulate this partition of 100 MB for no bug cannot continue to corrupt and better performance? Thank you all.

  A new installation of windows 7 can be said to delete this partition. do you when you get to the section "where do you want to install windows?" in installing windows 7. There is a player options button that allows you to delete both partitions... then create 1 new partition for windows and it throws a message saying that the operating system can create additional partitions... blah blah... and she... that way the 100 MB partition is clear. MyPcHealth - free tools

• What is the purpose of the sale of operating system preinstalled on laptops?

  What is the purpose behind the sale of operating system preinstalled on laptops? You try to save 1 cost of DVDs?  I either have to use my recovery DVDs (which is full of junk btw) do more DVD and disk space or try to look for OEM copies or other sources of torrent which contains mostly horses virus/Trojan etc... (given that my laptop have ultimate am I looking for my own language as well) Since your price of the OS is included in the price of laptops, what is the purpose of this Act cheap marketing? Im sure even download it costs you and me in terms of bandwidth internet. I paid for it and I want to do a clean install of it whenever I want.

  Original title: A Simple Question

  Versions OEM Windows 7 that are pre-installed on new computers laptops or desktop computers is significantly cheaper than commercial versions. Because manufacturers buy Windows licenses in bulk, it offers the flexibility to offer more affordable way for consumer Windows.

  Imagine paying $300 to $ 50 on this new PC? In fact, the OEM might pay $50 for the license, but likely to be practiced only $25 for the consumer.

• The size of the base operating system Windows Vista on my Aspire 3680 282 is larger than 20 GB, is this normal

  The size of the base operating system Windows Vista on my Aspire 3680 2682 is larger than 20 GB, is this normal?

  Hello

  Yes; It's normal.

  In addition to the original operating system, you have updates, restore points of the system (set at 15% of the capacity of the hard drive) etc, etc.

  It will continue to grow.

  If you are worried about anything whatsoever, do a disk cleanup.

  http://Windows.Microsoft.com/en-us/Windows-Vista/delete-files-using-disk-cleanup

  You can download this program for FREE and see what fits on the disc.

  http://www.Jam-software.com/treesize_free/

  And always scan your system for malware.

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  See you soon.

• I can't read a CD that contains the UDF files on my Windows 7 system.

  I can't read a CD that contains the UDF files on my Windows 7 system.  When I try to open them, I get a message saying that I need a special software to fix it. but when I try to download this software (C2UDFFS. (SYS) I get "cannot copy file in the destination directory."  Would be grateful for any help.

  Try this link: -.

  http://support.Microsoft.com/kb/975617

  It will be useful.

• When I turn on my HP laptop, I get the message "No operating system". What can I do?

  My brother bought a HP Pavilion DV6 laptop, but when he turned on the first time the message "No Operating System" is displayed and nothing else happened.  Unfortunately he died on 8 April and I inherited this laptop.  Can I get the disc replacement with the operating system on them.  I have the product key of the system disks that were supposed to have been installed when he bought it.  Please notify.

  My brother bought a HP Pavilion DV6 laptop, but when he turned on the first time the message "No Operating System" is displayed and nothing else happened.  Unfortunately he died on 8 April and I inherited this laptop.  Can I get the disc replacement with the operating system on them.  I have the product key of the system disks that were supposed to have been installed when he bought it.  Please notify.

  See the other answer (s) you got but also note the following: the first thing to do is to ensure that there is no CD or DVD in the drive. If it and try to boot from it, you would probably get such a message.
  If there is not, there is a good chance that the hard drive is dead and must be replaced.

• I use LR cc and when I try to use the feature up, I get a message back indicating that "no connection found Upgright". I do not have ' had this problem in the past. IM using Windows 10 and I used a Canon 7 d Mark II with an II Canon 24-70 lens. No idea wh

  I use LR cc and when I try to use the feature up, I get a message back indicating that "no connection found Upgright". I have not had this problem in the past. IM using Windows 10 and I used a Canon 7 d Mark II with an II Canon 24-70 lens.

  It simply means that it cannot find enough information in the image to apply a correction. Have you tried to apply a profile and then using the vertical transformation.

• What is the HP Digital Imaging Monitor? Apply to my operating system, Windows 7?

  What is the HP Digital Imaging Monitor? Apply to my operating system, Windows 7? I want to remove the icon from the task bar (toolbar in the lower right corner of the screen) that I never use it.

  Picardjc wrote that "Digital imaging monitor is part of the HP software that communicates with your HP printer. This program allows to read the inklevels, get an out of paper message, scan from the device to the computer and so on. It is not necessary, but it will restrict the use of printers if you delete. "Understood. But for my printer HP Officejet Pro 8000 A809a, what is the purpose of having the digital imaging monitor icon in the taskbar Windows7 sp1 of the Notification area (aka system tray)? My A809a is NOT an all-in-one that includes a scanner; It is simply a very good printer. When I start to print something, if you need ink or paper, that information is displayed on the screen of my computer. So I ask again: why is the icon of monitor digital imaging on the taskbar? I clicked on at the time of this icon (I not print anything, but as usual, the printer is turned on), and nothing happened. R.N. (Roger) Folsom _ P.S. below I'll post some other discussions (with links to their locations) of the digital imaging monitor, I discovered before finding this site on which I am writing. There are a variety of opinions on what makes the digital imaging monitor. HP Digital Imaging Monitor is for HP director system tray access. This is necessary if you want to use the buttons of all-in-one on a HP printer all in one to scan documents or transfer photos from a camera manually. Closing the icon monitor HP digital imaging in the Windows system tray can cause the HP all-in-one to lose part of its scanning features and not the connection error message. In this case, you can restore all functionality by restarting the computer or by starting the HP digital imaging monitor. SOURCE: Yahoo http://answers.yahoo.com/question/index?qid=20080115093754AAlajpq - Re: REMOVE HP Digital Imaging Monitor of Systray? [Edited] 03/08/2011 14:05 - edited? 03/08/2011 14:08 Yes, it is safe to remove. In my view, it is usually in the program group under start / all programs / startup. Simply navigate under the Start button, right-click on it and delete! If it is not there, then remove it from the registry: run regedit and go to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run and delete it from the list in the right pane. If she is not there, then try hkey_current_user\\software\\microsoft\\windows\\currentversion\\run it's better than using msconfig and uncheck it. In my opinion, msconfig must always be set to Normal startup. Your printer will always print without that annoying obstructive utility called Digital Imaging Monitor. Ciao! Casey Henderson, MCP SOURCE: http://h30434.www3.hp.com/t5/Web-Printing-Software/REMOVING-HP-Digital-Imaging-Monitor-from-Systray/td-p/253515

• Qosmio F30-114 - a problem with the installation of operating system

  Hi all
  I have a problem during the installation of operating system from the recovery disk (Win XP Media Center Edition).
  After loading the disc, I seen the installer welcome window, set up all the parameters in it and pressed the OK button.
  After that, an error has occurred (in a black console window):

  Check the type of partition MBR
  Not FOUND: Partition ID 4 is 0x00 not 0 x 88
  Seeking the TMBR
  No found TMBR!
  Fact.

  Microsoft DiskPart version 5.2.3790.1830
  Copyright (C) 1999-2001 Microsoft Corporation.
  On computer: MININT-JVC

  Disk 0 is now the selected disk.

  Services of disk management cannot complete the operation.
  Specified drive does not exist.
  ERROR: E:\04629R01 Reco-unpacking. TPA has failed!
  Press a key to continue...

  After reading this message and pressing a computer key restarts and that's all that happens.
  Also I can not install another OS (Win 7 for example), during the last part of an installation, I get a message "the work cannot be completed.".

  That's happened? I don't understand what is the reason for this problem. I was reinstall another OS (the drive recovery too) often earlier and everything was OK.

  You can install WXP using the Microsoft installation disc?
  Set the BIOS on the settings by default and to use the recovery disk again.

• LabWindows 4.0 is compatible with the 64-bit operating system?

  I have a very old code CVI for PCI 6030th, who works on a 32-bit windows xp computer. The PCI card has been installed recently on a new computer that has a 64-bit windows 7 on it. The code does not work on the new pc. I was told that 6030th PCI can be performed by a virtual pc, so the only option would be to partition the HARD drive and install windows xp. CVI 4.0 code runs on a 64-bit operating system? I guess that the drivers may not be compatible. If not, is there a way to run the old code on a new version of labwindows cvi without having to rewrite it completely?

  Thank you!

  Sikora

  Hi Sikora,

  I don't think you'll be in too much luck. I'm assuming that your code has probably been covering on your PCI device 6030th using traditional DAQ, which is not supported on the operating systems Windows 7. You might go to NOR-DAQmx 9.1.1, that is supported on Windows 7, but this will require you to rewrite your code to convert into orders DAQmx.

  Kind regards

  Jackie

• How to make the updates of operating system for the limited user account?

  original title: how to make the updates of operating system for the limited user account?  Limited user account cannot access the Windows Update page, see instead cautioned against MS the most recent must be installed.

  XP Pro SP3 slipstreamed.  New a DBAN nuked HDD installation

  All the OS updates installed from Admin acct before creating the LUA

  AV installed AVAST

  all dot net uninstalled and then reinstalled to resolve a problem installing Quicken

  Updates to auto lit

  Active Windows Firewall

  Three solutions of workaround for Windows XP running as a limited user

  http://blogs.Computerworld.com/16502/three_workarounds_for_running_windows_xp_as_a_limited_user

  Survive a Windows XP Limited user account

  http://techknack.NET/surviving-a-Windows-XP-limited-user-account/

  See the response from Michael Kuntz - re: HAL files

  http://social.technet.Microsoft.com/forums/en-us/itproxpsp/thread/e8612ac4-b881-4FB3-85e7-32004932fb5f

  There is an available for installation of SP3 Cd

  Manually installing SP3 using the Microsoft Download Center or a CD

  If you have problems to receive the service pack from Windows Update, you can download SP3 as a standalone package from the Microsoft Download Center Web site, and then install SP3 manually. The installation package is intended for it professionals and developers, but you can always download and install this file.

  You can also order a CD from Microsoft containing SP3. For more information, go to the Microsoft site.

  To manually install SP3 using the standalone package installation or CD

  1. Do one of the following:

     • If you downloaded SP3 from the Web site, to install it immediately, click Open or run and follow the instructions on the screen. To install the program later, click on save and download the file to install it on your computer. When you are ready to install the service pack, double-click the file.

     • If you install SP3 from the Service Pack 3 CD, insert the disc into your computer with your current version of Windows XP running, and Software Update Installation Wizard should appear automatically. If this wizard does not appear, click Start, double-click my computer, click on your CD or DVD drive and then click AutoPlay.

  2. In Windows XP Service Pack 3 page, click Next.

  3. Follow the instructions that appear on your screen.

  4. Once the installation is complete, click Finish to restart your computer.

  5. If you disabled your antivirus software, turn it back on.

• I want to upgrade to a newer Windows operating system Windows Vista Home Pro 64-bit. What is the recommended procedure?

  * Original title: upgrade

  I want to upgrade to a newer Windows operating system Windows Vista Home Pro 64-bit. What is the recommended procedure? I see that Windows 7 or 8, a free update to Windows 10 is offered. Should I buy 7 or 8 then you spend 10 or just buy 10?

  Thank you

  Jim

  Hello

  Depends on hardware configuration required on later operating systems, and also find out if the manufacturer of the laptop computer is supported and provides drivers for operating systems later as to whether it is possible or feasible to upgrade or not.

  There is no free upgrade Vista to 7, 8.1, or 10.

  Follow these steps before you buy Windows 7.

  Microsoft sells more than 7; Try Amazon.com.

  Go to your computer / computer laptop manufacturer Web site and see if Windows 7 drivers are available for your make and model computer / laptop.

  If this is not available, Windows 7 will not properly work for you.

  Run the "Windows 7 Upgrade Advisor.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=20

  Check if your specifications are compatible for Windows 7:

  "Windows 7 system requirements"

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

  "Windows 7 Compatibility Center" for software and hardware:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Windows 7 upgrade paths:

  http://TechNet.Microsoft.com/en-us/library/dd772579 (v = ws.10) .aspx

  «Installation and reinstallation of Windows 7»

  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7

  @@@@@@@@@@@@@@@@@@@@@@@@

  Follow these steps before buy you and upgrade (new installation) of Windows 8.1.

  Microsoft sells more than 8/8.1.

  Try Amazon.com, etc.

  Check if the manufacturer of your computer/laptop has Windows 8.1 drivers available for your model.

  If this is not available, Windows 8.1 not install and work properly for you.

  There is a lot of information in this first link from Microsoft:

  Download and run the Windows Upgrade Assistant 8.1 of to see if your machine is compatible Windows 8.1 and read the update for Windows 8.1: FAQ here

  "Update to Windows 8.1: FAQ".

  http://Windows.Microsoft.com/en-us/Windows-8/upgrade-to-Windows-8

  "8.1 for Windows system requirements.

  http://Windows.Microsoft.com/en-us/Windows-8/system-requirements

  @@@@@@@@@@@@@@@@@@@@@@@

  How to buy Windows 10:

  http://www.microsoftstore.com/store/msusa/en_US/cat/Windows/CategoryID.70036700

  But first make sure that you have the correct configuration and your computer manufacturer provides the right drivers for 10.

  https://www.Microsoft.com/en-us/Windows/Windows-10-specifications#sysreqs

  " System requirements Windows 10"

  https://www.Thurrott.com/Windows/Windows-10/3884/Windows-10-system-requirements

  Microsoft deploys Windows 10 available as free upgrade to Windows 7 features, Windows and Windows Phone 8.1 8.1 qualified. It will be available from July 29, 2015

  "FAQ Windows 10.

  http://www.Microsoft.com/en-us/Windows/Windows-10-FAQ

  See you soon.

• computer laptop Sony vaio S - series VPCS133GN, operating system windows 7 Professional (64 bit) genune, these days, my pen drives are not installation and opening

  I use a computer laptop sony vaio S - series VPCS133GN operating system windows 7 Professional (64 bit) genune, last few days my pen drives are not installation and opening. Kindly help me.

  Best regards

  A.C. Dutta

  Hi Johanna,.

  Thanks for posting your query in Microsoft Community.

  I understand that you can not use the USB in Windows 7.

  I imagine the inconvenience that you are experiencing. I will definitely help you with this

  1. you get any error message?

  2 have you tried using different USB ports?

  3. any other USB key works on the computer in question?

  4. do the USB works on any other computer?

  5 have had any changes made to the computer before the show?

  Please follow the methods.

  Method 1:

  Run the Microsoft fixit for the link.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2:

  As all devices have same also have USB device associated drivers. Appropriate sometimes drivers not detected after initial installation so reinstalling the drivers can fix the problems.

  You can check after uninstalling and reinstalling USB drivers if you are able to connect. You can disconnect all USB devices and then perform the following steps:

  (a) click Startand then click Control Panel.

  (b) click system and Maintenance, click System, and then click Device Manager.

  (c) Note if the control panel is in Classic view, double-click Systemand then click on Device Manager.

  (d) If you are prompted for an administrator password or a confirmation, type the password, or click allow.

  (e) in Device Manager, double-click to expand the "USB Bus controllers", right click on the controller host, click "Uninstall" and click "OK".
  Check that if at all, there is an exclamation point on the pilot, it suggests problems with the installed driver.

  (f) repeat step 2 to uninstall all items under 'USB Bus controllers'.

  Then, restart your computer and Windows 7 will automatically reinstall all USB controllers.

  We would be more than happy to help you if the steps above did not solve the problem.

• Reinstall the T61 WXP operating system

  Hi and thanks-

  My T61 is defective.  After spending a month with Microsoft's Service, they told me that I have to re - install Windows XP (in fact, to do a "Rpeair".)  When I start using my Windows XP disk, I get the message 'Windows XP cannot find a hard disk'. (my paraphrase of a long message)

  I bought this computer used.  The drive is a Seagate ST9320320AS SATA - 320 GB hard drive.   Windows displays a single 275 GB partition.  The person who sold me the computer (a year ago or not) told me that all the installation files are on a hidden partition.  The only other player that Windows shows me is the DVD player, d

  How can question - I reinstall my OS Winows XP?

  Thank you so much your help fair!

  to change the sata setting press F1 at power on config should be highlighted Press enter scroll down to serial ata (sata), press enter sata mode option contrller press on enter choose compatibility press F10 to save the changes (you need to do is, if you use a disk to detail MS. win xp) the only way to get into the recovery partition is well rescue & recovery http://support.lenovo.com/en_US/downloads/detail.page?DocID=HT002492