LaserJer Pro 200 M351nw: residues of toner to print business cards

Similar Questions

• HP Laserjet Pro 200 m251nw: I've got streaks printing on laserjet 200.

  All of a sudden, I have red streaks, printing on the right side of my documents. I tried using the cleaning page and it doesn't seem to help. I also have small black dots in various parts of the document which keep appearing on my documents. Cleaning that does not either.

  It seems to be a residue of red on the sponge roll just before the paper out of the printer. How can we clean this roller or must it be replaced to correct? I used my vacuumn to try to clean it up, but it doesn't do any good.

  Need help.

  Hey @AlaskaMariner,

  Welcome to the Forums of HP Support!

  I understand that you have a problem of magenta print quality printing of your color HP LaserJet Pro 200 M251nw of the printer. I would like to help you to solve this problem today. Thanks for the troubleshooting steps you have already tried before reaching out for support, including.

  On this model of printer there no zones in the product that you can clean it manually. The only method supported this printer paper path cleaning and area of the cartridge is running the cleaning page. You may need to run the cleaning a few times page to fix this.

  Sometimes red streaks can be caused by a low toner cartridge. When toner is low, it can gather in some areas inside the cartridge and create a "streak". I can have you hold the cartridge by the sides and shake it gently from left to right to redistribute the toner. Once the cartridge has been shaken, reinstall the cartridge. Once your cartridge is re-installed, please test print to see if the problem of dragging is still happening.

  If the problem persists you can please click here for the steps of quality supported by your printer. "Once the document of support opens please run through the steps to"check toner cartridge status"", "make the diagnosis of additional print quality" and "inspect the drum unit for damage".

  If the quality issue persists you may need to try a new HP authentic to verify whether this problem is caused by a magenta cartridge faulty cartridge or the printer.

  The black dots that you see are often caused by a dirty paper path roller or fuser on your printer number. As mentioned previously, the only way to solve a dirty paper path would be to run several pages of cleaning. A defective fuser unit would lead to a replacement of the entire unit.

  Please reply to this message with the result of your troubleshooting. Good luck!

• Color LaserJet Pro 200 M251n: LJ Pro200 M251n not print not some font sizes

  My new printer does not print text to certain sizes of fonts using Word or Publisher 2010. Until 60pt, it's good, but not 72, 100, or 120. However, it will print 240 pt. It will also display these text elements of the pdf document.

  Is this a driver problem? I use PCL6 but cannot find any drivers on the HP site. Do I need UPD PCL 6?

  Hello

  Update the latest firmware for the printer, which should solve this.

  Use the next tool if it is connected with a USB key:

  http://ftp.HP.com/pub/softlib/software13/COL44532/LJ-108129-8/M251_color_Series_FW_Update-20150212.exe

  For a network connection, follow these steps:

  http://support.HP.com/us-en/product/HP-LaserJet-Pro-200-color-printer-M251nw/5097632/model/5097639/document/c03341482

  Kind regards

  Shlomi

• LaserJet Pro 200 color M251nw: laser jet pro 200 m251nw of color do not print after installation

  After having trouble with an old printer, I decided to move to a faster, apparently better model purchased in a big box store.  I set up the printer according to the instructions, connected successfully to my network wi - fi and started to install the driver with the drive on my laptop, which is also a more recent HP.

  Everything installed perfectly, but does not pass the test print.  After trying all available on the HP site troubleshooting, (turned off, disconnected, reconnected, fuel up to... uninstall, download a driver specific to windows 8.1, reboot... printing reports of wireless network test and reports configuration... Disabling 3rd party firewalls, reboot and reinstall...) Everything says it is correctly installed, the printer is displayed correctly in the control panel and is defined as the default value.  When I try to print anything good, the screen on the printer briefly flashes 'impression', then goes back to the homescreen without even a glance.  Seconds later, my phone tells me that there is an error.

  I was fed up, and HP Print and Scan Doctor gave me no indication of potential problems.  I would like a customer service representative or technician to contact me to fix this problem as soon as POSSIBLE, I need this printer for my small business and have lost a whole day trying to make it work.

  Hey @getnirritated!

  Thank you for posting back!

  Here is a list of settings for the router company to make sure that the router is configured for a printer wireless networking:

  ~ Network name and password need to have no SPACES or punctuation
  ~ Must be using WPA security
  ~ 128-bit encryption type
  ~ Double broadcast wireless b/g/n (printer connect only to g.)
  ~ MAC filter should be disabled
  ~ The multicast must be enabled
  ~ Hello must be enabled
  ~ The value dual band 2.4 Ghz
  ~ The firewall settings should be there by default, settings or the value of lower security
  ~ Please that the following ports are not blocked:
  The incoming (UDP) ports: 137, 138, 161, 427 (iPad, 80, 443)
  Outgoing (TCP) ports: 137, 139, 427, 9100, 9220, 9500 (iPad 5222, 5223)

  I hope this helps to solve the problem!  Please post again and let me know how it goes!

• New Color LaserJet Pro 200 MFP M276n gives the message "printer is off-line.

  Hi, I have install and use this printer last week, no problem with printing.  Today it tells me that the printer is offline, and documents to sit in the queue without printing.  I am running Windows 7 on the laptop and the printer is connected via a USB cable. It is an office of a person, so I'm the only user of the computer and the printer.  Any suggestions?

  Thanks for your comments.  I ended up ringing the help desk.  I think that print driver software had been corrupted, as it started printing when we tried to re - charge print drivers.  Hope that this kind of thing does not happen too often.  Too much stress!

• LaserJet pro 200 color mfp: how to stop printing garbage

  Is there a way to stop the printer from printing waste?  Unfortunately, when you install a new system, the printer was sent to garbage, it would print 1 line of gibberish on each page of what appeared to be hundreds of pages.  I tried cancel documents in win7, restart the computer, turn off the printer, then press cancel.  Nothing seemed to work except by pressing the batch ' button sssssssssssssssssss cancel time.  I'll still put up new system, and fear that this may happen again.  Thanks in advance for the help.

  When you turn off the printer, all documents that are in the memory of the printer get out, however, if the printer has not sent a message to the computer that a document is finished printing it remains in the printq printers and try to print whenever the printer communicates with the computer. On the computer, you will need to go to the printer and click twice on the icon, and click then on what is the impression which will reveal the printq of all elements waiting to be printed. Just right-click on each item and cancel printing until the q is empty.

• LaserJet Pro 200 color M251nw: parts of Documents Print not

  When I try to print some documents, parts of them do not print. For example, I tried to print letters in a grid and the grid printed, but the letters do not have. It was created in Microsoft word. I tried to print by there and then save it as a PDF and print it through Adobe and it would not print the letters, so be it. I've also had this happen with other documents in the past. My printer is connected to a USB port.

  Hi @pt1921,

  Thanks for getting back to me.

  I found a HP article which may help. Click here and work your way through the recommended steps.

  Let me know if it helps.

  Kind regards

• Laser Jet Pro 200 M2 MFP color: stopcock on printer laser jet pro 200 alerts

  How to stop printing alerts "beep".

  Hi DerekNCR,

  Thank you for explaining that to me.

  I don't know why the printer is beeps sounds every time that you try to print. The printer should just do normal noises when printing or treatment, but not a beep sounds.

  You have the printer connected to a UPS power?

  I heard of this printers causing to make beeps sounds. Weird I know!

  Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation.

  The printer has only Fax sound volume in the options screen to change. If you have a fax cable connected to the printer, unplug it to see if it is the culprit.

  • The alarm volume
  • Ring volume
  • Phone line Volume

  Please hold me.

  Thank you.

• LaserJet Pro 200 M276NW color does not print more than once; application freezes

  Hello.  I had a problem with Laserjet Pro 200 color M276NW my family when printing from my desktop Windows 7 (64 bit) for quite awhile.  The first time I print a document after starting my computer, it prints the entire document very well.  However, the print jobs will simply freeze the program that sent them (for example Outlook, Opera, etc.) on a screen ' print the page of.  Also, I can't print a test page in Windows when the first task is completed.  I finally realized that it probably has something to do with the spooler service in Windows, or in the print queue.  When I look in the queue after printing the first document, it shows that the paper in it, but the new job that froze my app does not appear.  After I restarted my computer, I can print a document more before I have to restart again.

  The printer is networked on our home network; It is not connected to any computer via USB, and in my opinion, is the connection to the ethernet router.  My computer is connected to our network via a wireless connection.  I tried to restart the spooler, enter the IP address of the printer in my web browser (which works fine and shows the right page), and everything else listed in the Help article.  Try to open the printer properties in devices and printers does nothing.

  To complicate, the printer won't even print the first work since I got on my computer and I tried this today.  Also, I got exactly the same problem on my laptop, which also used Windows 7 and connected to our home network wireless. The laptop now has Linux on it instead. I tested several printing on it earlier and they print very well.

  My father, who has a wired connection to the router, told me that it is able to print more than one job very well.  I just had my brother (who also has a wired connection) print two different documents, and it has worked very well.  This leads me to believe that there is somehow something to do with the Wi - Fi computer assigned to the router, in combination with Windows 7, apparently.

  Moon Raker, starting with the sounds like it is a driver problem. I want to start to be sure that deleting the software and relocation happened in the best way possible. I want you to follow my steps, I can be sure that we start both on the same page.

• Color HP LaserJet Pro 200 M252: clearing the jammed paper

  Printed paper is stuck between the back door of the printer and the output area and is not reachable to clear for further printing.   I can't access this area.  How can it be erased successfully.

  Hi @trevorat10 ,

  By your post, I see that you have a paper jam from the rear door of the printer and the output area. Want to know how to remove it. I want to help you solve this problem.

  I'm sorry, but I can't find a color HP LaserJet Pro 200 M252.

  When the printer was purchased?

  You may color HP LaserJet Pro 200 M251 model?

  Please call our technical support at 800-474-6836 if the printer is still under warranty for assistance. If you do not live in the United States / Canada region, please click the link below to get help from your region number.
  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  Have a great day!
  Thank you.

• OfficeJet Pro 8610: business card printing Officejet Pro 8610

  Recently purchased the officejet Pro 8610 and I was wondering what is the best type of paper or stock for printing business cards

  (Matt and glossy paper types)?

  @himrajbir

  I used Avery "Clean Edge business cards" for a number of years.

  Ink jet business cards Avery #8871

  Regardless of the make or model, buy the right cards for your type of printer:

  Ink Jet

  Help, Suggestions and examples:

  Print Labels_Business-Cards_Cards

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  Fixed / responded? Click this post accept as Solution to help others find answers.

• LaserJet Pro 200 color M251nw: Toner

  I just replaced my HP LaserJet CP1215 with color HP LaserJet Pro 200.

  The used CP1215 of toner in the CB540 series cartridges.  I still have unused capacity in them.  The M251nw uses the CF210 series cartridges.  They look the same.  Can I use the CB540 instead of the CF210?

  The cartrdiges CF210 and CB540 are not interchangeable. You will need to CF210a or high capacity CF210x series as it is stated on the Site of HP SureSupplycartrdige.

• LaserJet Pro 200 MFPM276nw: toner smudges

  A new Laser Jet Pro 200 bought several months ago; all very well with the cartridges supplied with the printer.

  Had to replace the black cartridge after about 2 months without any problems.

  I come to the point where a change of the cartridge was necessary for color cartridges - this in part for the nagging messages on the low toner level.  Swapped all three and the cyan cartridge is now Burr toner everywhere on the page.  Thought something was wrong with the printer.  Replaced the new with the old one - good cyan cartridge.  The new number of return to and even one.

  I ran 30 pages through the printer with the same result.  These are genuine HP cartridges.

  For an example, see the attachment.

  Please help.  Thank you!

  1-800-334-5144

  When it asks for the product category says "laserjet".

  then it will ask for the model number & say "M276.

  explain what is happening to the assigned technology, and it will generate a case - ask you to print a configuration page and supplies status page and should send you a replacement. You will get a return label with your replacement, and you probably need to put these reports with your faulty cartridge. It happened, but rarely.

• Jet laser pro 200 will not copy

  Hi, I had my laser jet pro 200 for at least 6 months and only used as a printer.  For the first time today, I tried to copy something and I got a white sheet of paper.  I tried the flat bed and the charger and the same result.  If all goes well, there is a setting that I missed.  Any thoughts?

  HI Brian_D_H,

  Thanks for posting what you did until now, based on that - I was able to find guides troubleshooting steps for you to follow:

  The problems of copy quality

  Troubleshooting print quality problems

  If those who do not help and the toner is not exhausted, you would be best to call technical support for assistance. You can contact HP support at 1-800-474-6836 North America or find the local number for your country here: http://welcome.hp.com/country/w1/en/support.html please look for the category 'technical support after you buy '.

• HP Laserjet Pro 200 Color MFP FAX answering machine vs M276nw

  We have the following MFP: HP Laserjet Pro 200 Color MFP M276nw

  Our office has a phone line to be shared between the phone and FAX (M276nw). The phone is a phone single line of integrated with a digital answering machine Panasonic KX-TG7531 model. I can't seem to find the right combination of settings for ringtone for the phone and the FAX that allows callers to leave a voicemail without the FAX modem tones interfere when the caller leaves a voice message. It's as if the fax does not recognize that the answering machine picked up and he continues to make sounds of modem. The tones are saved as well as the message of the caller's voice, which makes the message difficult to understand. In most cases, the caller simply hangs up without leaving a message (we've heard talk about this later).

  Please tell us how to implement. Thank you!

  Furthermore, the HP Laserjet Pro 200 Color MFP M276nw replaced a MFP from brother, but the Brother FAX has worked with the same phone from Panasonic.

  Hi crmarrio

  I understand that you are having problems of fax.

  Run this test for the fax.
  In the home screen, press the button on the key.
  Tap the service button.
  Tap the fax service.
  Touch run fax test.

  Check all these fax settings.

  Here is a url for the fax troubleshooting.

  http://support.HP.com/us-en/document/c03363598

  Go to the icon/fax setup menu/Advanced Configuration key / private receive/disable it.
  Go to thewrench icon/service/fax service/error correction/stop.

  Go to Settings icon/fax thewrench / fax/advanced/change configuration to speed it to the middle.

  Go to the key icon/fax installation base/menu Configuration/response/game of rings rings.

  (if using an answering machine-more rings on fax and answering machine or rings of mail without a voice for the fax, but receives no voicemail, should get installation of distinctive ring on the line in this case)

  Go to the key icon/fax setup basic menu setup/response/selection of auto mode.

  Go for a key icon/service menu/fax service/clear saved faxes

  Go to key icon/fax installation base/menu setup/distinctive ring/set for proper ringtone type. (if you don't have a special ringtone set on all ringtones.

  Update the firmware of the printer by usb connection.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&DLC=en&docName=c03363598&LC=en&product=5097654&

  Let me know the results of the fax test, and if you were able to send or receive a fax.

  If you're still having problems, let me know and I send you private message how to reset the printer.