LaserJet 5000: LaserJet 5000 N Mac

Similar Questions

• LaserJet 3600n for mac-drver recommended 2.7 version, does not install

  I downloaded, from a supplied link, printer driver version 2.7 for Laserjet 3600n for mac. I thought that the installation was successful and the software is installed, however I can't find anywhere on a hard drive and printer driver version 1.3 watch info.

  Where is the problem

  Hi seegal

  version 1.3.0 is the latest version of the driver for your printer

  version 2.7 indicated full HP driver package bundke for any HP product...

  As you can see below, the following list shows which version of driver software HP printer 2.7 contains any product specific HP, and as you can see 1.3.0 is the latest driver:

  http://support.Apple.com/kb/HT3669#HP

• HP Laserjet 5000 with Mac OSX 10.8.5

  I have a HP Laserjet 5000N printer. It was working fine but stopped communicating with my Mac - OSX 10.8.5. I have installed the latest driver, made that it recharges, etc..  I printed the configuration pages.

  Any advice would be greatly appreciated. Thank you!

  P.S. This thread has been moved from Laserjet Macintosh compatible products. -Hp moderator of the Forum

  Fixed! IP address had been changed - found by Setup Print print. The dinosaur lives!

• HP Laserjet MFP M225dw: Mac can't see MFP HP Laserjet 225w

  My Mac Airbook (Yosemite, worm 10.10.3) worked very well with my HP printer MFP M225DW until about two weeks ago. It's all about my wireless network, and everything worked fine for the last year. I not made any changes to the printer, computer, or your network when the problem started, the computer saw the printer from the printer and Scanner funcdtion. The printer says it was online and available, but it is not one of the jobs I tried to print print. I tried to delete the printer, thinking I might add and who could solve the problem. Now, he doesn't see any of the printer. I checked and the printer and the Mac are on the same network. The printer worked very well for Mac from my wife, who is on the same network. It's only my Mac which can not see the printer. Can you help me?

  Hey @RJVezza,

  I'm very happy to hear that your HP Laserjet works fine now!

  It is good to have a firewall running on your Mac to block potential threats to access your system. Therefore, you can add HP as an exception in the firewall to allow your HP Laserjet full print and scan access, while keeping your computer protected.

  1. click the Apple and select System Preferences

  2. Select Security & Privacy

  3. Select the firewall tab

  4. Please turn ON your firewall

  5. then, click on firewall Options

  6. make sure that the box next to block all incoming connections is unchecked.

  7. make sure the automatically allow signed software to receive incoming connection is checked.

• Resolution of printing on HP LaserJet 1606dn on Mac?

  In the Forum:

  I use HP LaserJet 1606dn on an Apple Mac Pro system 10.6.8.  The print driver instructions are source of confusing when trying to set the resolution.  I think that 'Standard' means 600 dpi and "FastRes 1200', 1200 dpi.  Is this correct?  I think that these are the only dpi settings available on the HP 1606dn and there seems to be no option for further settings dpi, 300 dpi or other custom settings.  Am I right about this limitation?

  Clarification on the forum.

  Concerning

  Sternhagen

  Kyle:

  Thanks for the reply and clarification.  He answered my question.

  Concerning

  Sternhagen

• LaserJet Pro cp1025nw MAC OS 10.8 wireless configuration

  I have a new HP LaserJet Pro CP1025nw color printer, an iMAC running OS 10.8, an iPad and iPhone.

  I configured the printer very well via USB port of the iMAC.  I can print from the computer, but I can't leave my iDevices.  I understand that I can no longer use the CD that came with the printer, or the last download of HP to set up the wireless or install the new firmware because I get the "install HP' can not open because he...» "error.  So I have three questions 1. How can I configure the wireless on the HP printer using my iMac running 10.8, 2. How can I activate Apple's AirPrint and 3. How to install the latest firmware (ver. 20120130) in my printer using MAC OS 10.8.  Your help would be great.

  None of the options I found in HP forums allowed me to configure my printer wireless using MAC OS 10.8. I've been by the dint of borrow a laptop running windows 7.  I plugged in the wireless, used the disk supplied with the printer to install on the network, downloaded the upgrade of farm and installed it. All my apple and iDevices computers see the printer. It works like a charm.

• Configuration without wire - HP Laserjet P1100w with Mac OS 10.7.5

  Ok

  I have the most recent updates of software through my Mac. I am connected via USB but unable to connect via Wifi.

  What is going on?

  Hi @rkcampbell,

  By your post, I see that you cannot set up the printer on the wireless network. I can help you.

  Make sure that Safari is set as default browser. (sometimes the SAP will not open if it is not set by default)

  Open Safari, at the top, select the Safari menu, select Preferences, general, as a default value.

  Reset the printer first to clear the previous network settings.
  Turn the printer off, press and hold the wireless button and cancel (x button) while turning the printer on and do not release both buttons until the printer stops making the noise.

  Print a configuration report and check the SSID address and IP are disabled.
  (hold down the x key and when the printer makes a noise to let go of taken)

  Check the name of the driver that is installed by the printer. Make sure that it shows just the name of the printer.
  Click on the Apple menu, click System Preferences. Click on Printers & Scanners, highlight the name of the printer on the left side and right side of the screen it should show the name of the printer. (Officejet 6500)

  If the full name of the printer is not correctly, delete and add the printer name back from the list. Click on the sign - to remove the driver and then click on the + sign to add the driver might have to drop-down list to select the name of the printer to add a click.

  Check your network encryption type.

  Go, go to the Apple/system preferences/network/click on the button advanced/double click on the name of the network. (watch the WEP or WPA)

  Check the network password.
  In the Apple menu, click on Go, selection of applications, utilities, Keychain Access, double-click the name of the network,
  Check the show the password box, type your Mac password to see.  (some networks have a password shortcut configuration)

  And then double-click the P1102w printers & scanners.

  Open the utility.

  Click Printer Setup.

  Click Config to HTML.

  This should open the Web built-in to the printer server.

  Click the network tab.
  Click on wireless in the list on the left.
  Under Communication Mode, click Infrastructure.

  Select your network SSID from the list of available network names (SSID), then click on the< button="" so="" the="" network="" name="" moves="" over="" to="" other="">
  In the Safe Mode pop-up menu, under authentication, click WEP, WPA/WPA2 or open. Your selection depends on which wireless security protocol using your network.

  Make sure that you select hexadecimal or alpha according to your password. (very important)

  Apply the settings.

  In the confirmation box (changes have been registered), click OK.

  You should get a solid blue light on the printer shortly.

  All we have to do is remove the USB driver and add the network driver.

  Click on the Apple.
  Click on System Preferences.

  Click the Printers & Scanners.

  Select the printer, and then click the sign - to remove the printer. (USB driver)

  Unplug the USB cable.

  Then click on the + sign and select the printer from the list and click Add. (Hello P1102w)

  Test the printer.

  If you have problems with the opening of HTML configuration, then perform the following steps:

  Close all applications.

  In the Apple menu, click on Go, computer, MAC hard drive, library, Printers, HP, LaserJet, click the folder for your printer, click browser EWS / config HTML, click on the network tab, click on wireless on the left and fill out your information. (Make sure infrastructure is selected) Apply the settings.

  Then, unplug the USB cable and remove the USB driver and add the network printer. Make sure that this shows that the name of the printer.

  Test the printer.

  Please provide detailed results if you're still having problems.

  Good day!
  Thank you.

• HP LaserJet P1006 and Mac running OS Yosemite

  I can't get my desktop Mac to recognize my LaserJet P1006 since update today in Yosemite.  Help!

  Hello @JaneCat,

  Welcome to the Forums of HP Support!

  I see that you want to install your Laserjet P1006 Pro on your new Mac OS X 10.10 Yosemite operating system. However, currently there is no driver because of the age of your product.

  The only option would be to try to use the Apple Software Update to see if it recognizes your product at all.  However, currently HP no evidence that your product has any driver for Mac OS X 10.10 support.

  If you want to try the mode of installation of your product Apple software updates, you can find detailed instructions in the following document:

  HP LaserJet - update install the HP for OS X 10.7 and later versions

  Yet once, it is not guaranteed to work.

  Please let me know if these steps don't resolve your problem. Good luck!

• Drivers HP LaserJet 1020 for Mac OS x 10.7 Lion

  Hello

  I'm adding LaserJet 1020 Mac OS x 10.7 (Lion).

  According to this page , this printer is supported by Apple and its driver comes with OS. But when I add the printer in the "Print & Scan' it says that the driver for this printer is NOT available at Apple.

  Does anyone know how to use this printer on MacOSX?

  Thank you

  Alexander

  The insistence on the part of HP the 1020 has never supported on Mac is total nonsense. The Laserjet 1020 has been announced and sold as being compatible with Mac. I bought mine from an authorized retailer of Mac and still have the original box with the 'Compatible Mac' sticker on this subject. I have been running the 1020 with my iMac G5 for 5 years and never had any problem of support until I bought an iMac OS X Lion last week. The refusal to support this product is nothing more than a grab for money to force users to buy new equipment, despite owning a printer otherwise fully functional.

  Fortunately, you can run the 1020 on Lion with the 1022 driver. Follow the instructions at the top of the following link and read the extra step for Lion in the #63 comment. Printer driver use the 1.3 1022 and you should have no trouble to get your printer to work.

  http://blog.jayway.com/2010/04/08/HP-LaserJet-1020-in-Snow-Leopard/

• Printer LaserJet 4050 for Mac

  Trying to get the Pro Mac OS X 10.10.1 office to recognize the printer running. The printer was formerly with an old Windows machine. Connected with the new serial cable 9-pin to USB port.  Mac can't find the printer.  Any suggestions greatly appreciated.

  Don

  P.S. This thread dad was moevd Laserjet Macintosh compatible products. -Hp moderator of the Forum

  USB to parallel adatpers are the blind.  Best suggestion I can give is to buy a direct jet EIO card from ebay.  Model 600N, 610N and coming 615N work are very expensive.  Install the card in the printer with the power off and connect to your router or switch, and then reset the cold of the printer by pressing the green button while turning on the printer until cold reset appears in the menu of the printer.  Release and wait for the printer to come on loan.  Wait about 2 minutes for the printer obtain and ip address and see if the MAC can automatically discover the printer.  If she can very well and she not print a printer configuration page and the use of the ip address to load the printer on Mac.

• Installation software for HP Laserjet P1006 on Mac OS 10.8 Mountain Lion

  I just need software installation for the HP Laserjet P1006 for OS 10.8 Mountain Lion.  The CD that was originally used does not work for the Mountain Lion.  I have only a different HP printer on the network (OfficeJet Pro 8600) and need to reinstall the software to make the HP LaserJet P1006 working again.  The original driver software has been deleted inadvertently.  I have bee through the Support pages, but no address this particular issue.

  Download and install this: http://support.apple.com/kb/DL907

  Restart your Mac.

• HP LASERJET M1132 MFP: HP LASERJET M1132 MFP Mac connection

  When I plug in Mac OS X Yosemite for HP Laserjet M1132 MFP or EPSON L210 it always slowed down the printer

  Why does this happen?

  Welcome to the HP Forums @vladimhirXenon,

  I will certainly do my best to help you, however, I would ask that you please let me know some more useful information to help me the problem of the research for you and to clarify the issue.

  Please respond to me with the following. If there is no action here that you haven't tried, please try them before you answer and include the result in your response to me:

  1. How the printer is connected (USB / wireless / wired / Bluetooth)?
  2. Did you test functionality of the hardware (made copies) and they work successfully?
  3. You can print from any program?
  4. Have you tried
     1. Reset the printing system
     2. Repair disk permissions and to reinstall the software?
  5. Have you made recent changes to your establishment (moving, upgrade, downgrade, new software, new router, etc.)?
  6. Is the printer plugged directly into the wall (avoiding bars and surge arresters)?
  7. Did you complete all updates of Mac OS?
  8. Have you tried using a different USB/Ethernet cable?
  9. You see messages of error codes and if so, what they say and where do you see them?

  Thank you

• LaserJet 4500 on Mac 0SX... help.

  Hi all

  I have a Laserjet 4500 dinosaur which I'm trying to understand how to operate on my G5.  It doesn't have a USB port.  I would avoid using a router if possible. If this is the only way, I'm going to plug and unplug the device according to the needs, but I prefer a direct connection.

  Maybe I could make it work somehow with the network cord

  I have a Powermac G5, OSX 10.4.11.   At present, the network port is connected to a modem DSL from Qwest.

  Could someone guide me through how to do it please?  I tried different things in the past and do not now remember what they were, but the end result is that I could never work.  At one point, a long time ago, he acknowledged, on my laptop, when I was able to get them all in network. I don't know how, now.  But then it stopped working.  However, my laptop is old, Win 2000 and I never use it.  I need to be able to print directly on the Mac, since that's what I'm getting.

  Help, please. I tried for over a year to operate.  I've posted on several forums of the printer, nothing helps.

  Thanks in advance.

  Edit - since it is a network printer and which seems to create problems with get to recognize, I'm going to make this post in the forum to network printer.
  Thank you
  Message edited by kh12345 on 02/09/2009 07:25
  Message edited by kh12345 on 02/09/2009 07:25

  My first suggestion would be to buy a low-cost hub and turn the printer and the Mac on the same network.  Well, the question would be that your printer then get an IP from the LAN and be on the external web.  A router would be a much more practical solution.  Something with a wide AREA network and multiple LAN ports.  Then the DSL modem would connect the port WAN Mac and printer to two LAN ports.  Since most routers will distribute internal IP to the LAN via DHCP addresses and address translation allows to share the common WAN IP address, you should be good to go.  This is an additional cost, but also the most effective way.  This also gives you opportunities for future expansion.  Add another printer, PC, DVR, game system etc...

• help to install HP laserjet 1022 for mac

  I have a HP LaserJet 1022. My operating system is Mac OSX.5.8. I don't see that exact system appears in the online CV download. The systems mentioned only go up OSX.4. Can I still use your load down?

  Thank you!

  Hello

  Try this driver

  http://FTP.HP.com/pub/softlib/Software7/COL10919/LJ-31696-2/LJ_1022_Series_OSX.dmg

• Install a Laserjet 3380 on Mac OS x 10.7 x (Lion)

  Hello

  Very annoying, I'm unable to install a Laserjet 3380 on MACOSX with Lion. Whenever it is looking for the driver on the Internet and then end with the sorry statement that does not exist please contact your manufatcter printer!

  Hello

  I assume you are using the USB connection.

  While the product is connected to your Mac, click the Apple, then software update.

  Be sure to select and install the HP Printer Drivers 2.8 update.

  Once the update is installed successfully, in System Preferences > print & scan and click on the Plus sign to add the printer.

  If the driver update fails to install in next software update so manually install the package below:

  http://support.Apple.com/downloads/DL907/en_US/HPPrinterDrivers2.8.dmg

  Now try adding the printer once more.

  Please let me know of any problems,

  Shlomi