LaserJet M1212: Laserjet M1212 scans colors wrong

Similar Questions

• Multifunction color HP LaserJet Pro 200: HP LaserJet Pro 200 color MFP M276nw on El Capitan: Scan does not

  Since my upgrade to El Capitan my USB connected HP LaserJet Pro 200 M276nw MFP color analysis no more.

  What I've tried so far:

  Installed the latest drivers > unsuccessfully

  Tried all the solutions suggested here: http://h30434.www3.hp.com/t5/Scanning-Faxing-and-Copying/HP-LaserJet-Pro-200-color-MFP-M276nw-Scanni... > no success

  Have any suggestions what to do next?

  Update: the solution provided in this thread solved my problems:

  http://h30434.www3.HP.com/T5/Mac-printing-and-scanning/HP-LaserJet-2300-not-working-with-El-Capitan/m-p/5281267/highlight/true#M61077

   

• The HP Laserjet Pro 100 Color MFP 175nw scanning

  Does anyone know if HP Laserjet Pro 100 Color MFP 175nw requires the Ethernet connection to scan documents or WiFi will be sufficient?

  Hello

  The product of its capacity to provide by any method of connection took in charge.

  So you can scan via USB, Ethernet or wireless connection.

  Concerning

  Shlomi

• Printer Laserjet 2600n color wrong print

  Hi all

  I have a Laserjet 2600n HP color printer and the problem is that, when printing, the right side of the sheet is rewrinting the upper right part of the paper (sorry if I'm not clear enough, I'm French). I have this picture to help you understand what I'm trying to say. You can see the word "test" in rewriting, even if it is supposed to be only three times on the right side.

  I followed a few topics on the internet and so I cleaned the black box with the mirror in the back, and I remove the ETB several times because what I thought was the problem. But it seems that nothing works. What is a cartridge problem?

  Thanks in advance!

  

  Hello G4bb.

  I understand your concerns. Unfortunately, I need you to lead our Enterprise Business Community Forums. It will be the right section for this problem.

  Good luck.

• HP LaserJet Pro 200 color M25: installation printer HP Laser Pro 200 M251nw.

  M251nw color HP LaserJet Pro 200 No. product installation. CF147A: Installer said he has successfully installed my printer, but then the printer to add it to the window that says it can't find printer.  HP said I have to get my license from Apple. Apple says that I have to get my HP permit

  Hi @steeldrv ,

  I understand that you are having problems, adding the printer on Mac. I will do my best to help you.

  How is the printer connected? (USB, Ethernet, WiFi)

  I checked online and there is a form available full functionality driver HP.

  What is the software you have installed already, who says it was successful?

  HP LaserJet Pro 200 color M251 full set Solution software - Mac OS X 10.6, OS X 10.7, OS X 10.8.

  Try the following steps:

  Fix permissions of the drive on the Mac:

  Close all applications.

  In the Apple menu, click OK, click Applications, and then click utilities.

  Double-click disk utility.

  Highlight your hard drive / partition on the left.

  Click on check and then repair disk permissions.

  Restart the computer...

  Reset the printing system:

  Note: This will remove all printers in the print and Fax/Scan, any printer deleted can be re-added later by clicking the sign plus (+) symbol.

  Click on the Apple icon and then click on System Preferences.

  Click on Printers & Scanners.

  Make a right click (or Ctrl + click) in the left white side panel, and then click Reset printing system.

  Click OK to confirm the reset.

  Type the name and the correct password.

  Click OK to reset the printing system.

  Then click on the sign to add the driver, highlight the printer +. (you may need to click the drop down menu to select the name of the printer) Then click the Add button.

  Were you able to find and add the printer in?

  Print a self-test of the printer to make sure this isn't a hardware problem, causing the printer does not detect.

  Print a Configuration report.

  If the printer is networked, try and access the Web built-in to the printer server.
  Type the IP address in the address bar of your web browser. (Safari)

  It loads the page Web has?

  Please let me know the results and the way that the printer is configured, so I can provide appropriate measures to solve this problem.

  Good day!
  Thank you.

• How to configure the settings of mail on HP Laserjet Enterprise 500 color MFP M575 printer/scanner?

  How to configure the settings of mail on HP Laserjet Enterprise 500 color MFP M575 printer/scanner?  The Office has 5 staff members each with ending with [email protected] for example e-mail addresses.  We have also created an email for option analysis as [email protected] (not sure if creating an e-mail address for the scan option is required).  We are not part of any domain, and there is no server in the office.  When you try to configure the email on the printer/scanner control panel it asks the host name.

  What host name that I can use?

  If you try to configure the browser by using the IP address of the printer, he asks as the SMTP server. The MS Outlook 2010 all our emails use mail.junior - albania.org incoming mail server and outgoing.  Other settings in MS Outlook 2010 are box My outgoing server (SMTP) requires authentication checked and use the same settings as my mail server entering selected.  On the Advanced tab: incoming server (Pop3): 110 (SSL encryption is not checked) and outgoing (SMTP) server: 465 use the type of encrypted connection (SSL) following.

  What server SMTP should I use in this case?

  I would appreciate your help in the configuration of the HP printer/Scanner for scanning and sending by electronic mail to the members of the office staff email addresses.

  Thank you...

  I'll link you to the product page with several documents which I hope will help you to configure your e-mail settings. Please look through them and see which ones fit your needs:

  Scan and send (e-mail, send to folder, digital sending, etc..)

  Here is another site that has some videos that will guide you through the entire upward (here I would try everything first )

  Simulations of MFP - digital send

  If these don't work, please let me know and I will continue to search it for you.

• Help! My M475dn MFP HP LaserJet Pro 400 color printer will NOT print!

  HP LaserJet Pro 400 color MFP-M475dn-CE863A

  Printer on a network and can connect to multiple computers that include: Mac OS X, Windows 7 and Windows XP.

  When I try to print from my iMac, the print queue of the printer says "the printer is not connected.  When we try to print from Windows computers, it is in the right queue and does not print.  When I go the printer itself and try to print a page of demonstration or page supplies directly to him, it says on the screen which is printed, but nothing happens.  This is not hum or anything!  The port where the network cable is connected is switched on green that says HP which means that the network cable is connected.  We've had this printer for a year now, and something like that never happened.

  I did not have any software or anything like that until this happened.  It was working fine on Saturday when we used it, but when we arrived at work today, he just decided that it would interrupt printing!

  I'm puzzled!  I tried 'ping' IP address of the printer from my iMac and it pings fine.  Does anyone have advice?

  (I tried to make of the obvious like too switch the printer on and off and shutting the computer down and nothing!)

  Okay, so I feel a bit stupid right now.  I decided that I would be closed the printer for about an hour to see if it was there, and what you know-it has been!  I had to turn it off several times before but I guess it wasn't long enough.  What a pain!

  Thanks to everyone who took the time to read this!  Sorry to waste time everyone!

• turn off the broadcast without wire - HP laserjet pro 400 color mfp m475dw

  How do I disable broadcasting SSID for HP laserjet pro 400 color mfp m475dw.  I disabled the configuration via the web console wireless printer, but it is still broadcasting.  I also updated the firmware to 20131028 last available.

  Since it is wiered one of the scenario, I could solve this with the help of the HP Support is by doing factory reset/NVRAM reset the unit by turning the printer and holding right arrow and cancel on the touch screen of the device (cancel is on the lower right of the touch screen on the black area and right arrow is just above him (one in the middle of the Panel) in the same black box) and the device of turning on until the message something like storage reset... is displayed and can release the two buttons/zone button.

• HP LaserJet Pro CM1415fnw color multifunction printer - cannot FIND the WIRELESS NETWORKS

  PRINTER: HP LaserJet Pro CM1415fnw color multifunction printer

  OS: Windows 7

  OWNER: More than 2 years without any problem

  LOCATION/SET-UP: To my personal residence. All-in-one router through the cable company.

  QUESTION: Suddenly, printer cannot find wireless networks. Nothing has changed recently in my service provider or equipment. I know that the router and the internet is not the problem because our 2 smart phones and three laptops still not connect. I triend manually configure the network using the SSID and key phrases, but still nothing.

  Help!

  I would like to perform a hard reset by removing the power of the whole machienethrough the power cord for 30 seconds. Depending on whether I have would reconnect the printer to the wireless network and set a static IP address.

  -Spencer

• HP Laserjet Pro 200 Color MFP FAX answering machine vs M276nw

  We have the following MFP: HP Laserjet Pro 200 Color MFP M276nw

  Our office has a phone line to be shared between the phone and FAX (M276nw). The phone is a phone single line of integrated with a digital answering machine Panasonic KX-TG7531 model. I can't seem to find the right combination of settings for ringtone for the phone and the FAX that allows callers to leave a voicemail without the FAX modem tones interfere when the caller leaves a voice message. It's as if the fax does not recognize that the answering machine picked up and he continues to make sounds of modem. The tones are saved as well as the message of the caller's voice, which makes the message difficult to understand. In most cases, the caller simply hangs up without leaving a message (we've heard talk about this later).

  Please tell us how to implement. Thank you!

  Furthermore, the HP Laserjet Pro 200 Color MFP M276nw replaced a MFP from brother, but the Brother FAX has worked with the same phone from Panasonic.

  Hi crmarrio

  I understand that you are having problems of fax.

  Run this test for the fax.
  In the home screen, press the button on the key.
  Tap the service button.
  Tap the fax service.
  Touch run fax test.

  Check all these fax settings.

  Here is a url for the fax troubleshooting.

  http://support.HP.com/us-en/document/c03363598

  Go to the icon/fax setup menu/Advanced Configuration key / private receive/disable it.
  Go to thewrench icon/service/fax service/error correction/stop.

  Go to Settings icon/fax thewrench / fax/advanced/change configuration to speed it to the middle.

  Go to the key icon/fax installation base/menu Configuration/response/game of rings rings.

  (if using an answering machine-more rings on fax and answering machine or rings of mail without a voice for the fax, but receives no voicemail, should get installation of distinctive ring on the line in this case)

  Go to the key icon/fax setup basic menu setup/response/selection of auto mode.

  Go for a key icon/service menu/fax service/clear saved faxes

  Go to key icon/fax installation base/menu setup/distinctive ring/set for proper ringtone type. (if you don't have a special ringtone set on all ringtones.

  Update the firmware of the printer by usb connection.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&DLC=en&docName=c03363598&LC=en&product=5097654&

  Let me know the results of the fax test, and if you were able to send or receive a fax.

  If you're still having problems, let me know and I send you private message how to reset the printer.

• LaserJet Pro 200 color M251nw: Toner

  I just replaced my HP LaserJet CP1215 with color HP LaserJet Pro 200.

  The used CP1215 of toner in the CB540 series cartridges.  I still have unused capacity in them.  The M251nw uses the CF210 series cartridges.  They look the same.  Can I use the CB540 instead of the CF210?

  The cartrdiges CF210 and CB540 are not interchangeable. You will need to CF210a or high capacity CF210x series as it is stated on the Site of HP SureSupplycartrdige.

• Urgent: HP LaserJet Pro 200 Color MFP M276

  Heeeeeeeelp! Urgent!

  I am looking for the software and driver for HP LaserJet Pro 200 Color MFP M276.

  To the HP Web site, there is no download available.

  Who can help me with a link downlod?

  [Personal information]

  Hello

  Download the software on the HP site is fully accessible, I downloaded it without any problem at all right now.

  The following lik select your operating system and click on send, and then click Download for the full feature software and drivers:

  http://support.HP.com/us-en/product/HP-LaserJet-200-color-multifunction-printer/5097648/model/5097653/drivers

  If you have problems please specify what operating system you are using.

  Shlomi

• HP LaserJet Pro 200 Color MFP: HP LaserJet Pro 200 Color MFP M276n: low memory

  Hello

  my new M276n printer has memory problems. Printing over two pages are stopped with a notification of "memory". I searched this forum and found a 'temporary' solution (reset printer to default settings) and a stage of 3 mysteriously missing (deleted the message). This does not in the long run because after only 4 more printing, I have the same problem again. I don't print many, mainly Amazon returns labels and information. Reset or not, the information page shows 127MO 256 MB available memory. What is the other half serving?

  Issues related to the:

  1. is there a solution?

  2 can it help if I disable unnecessary features (fax)?

  3. can I disable fax? (If Yes: how?)

  4. is there a solution?

  Thank you!

  Restore the default settings is not usually serve the memory of a printer.  You need a cold reboot to complete this procedure.

  Cold Reset as follows:

  http://h30434.www3.HP.com/T5/printing-issues-troubleshooting/HP-LaserJet-Pro-200-color-MFP-M276nw-cold-reset/TD-p/5060955

  The video at the bottom of the first page is very useful.

• Multifunction Color LaserJet Pro 500 570: laserjet pro 500 color mfp software installation error 570dn

  Whenever I try to install my new printer, LaserJet Pro 500 color MFP 570dn software I get an error at 80%.  I tried using the disc that came with the printer and download the full software directly from HP.  I also tried with my anti-virus and firewall disabled.  I am running Windows 7 64 bit.  This is a new computer.  I was able to install it successfully on my old computer with the same OS.  I spent hours trying to solve this problem.  Help, please!  Thank you!

  Most of the time this means that there is something on the computer to interfere with the load.  The disk will be a file called scrubber.exe.  Find and run the program to remove any trace of the software of previous attempts and see if that solved the problem.  You can check in the Add Remove programs on the computer to see if the software of the printer has loaded in the past and if so, remove it before running the routine of the scrubber.

• Print HP Laserjet Pro 100 Color MFP M175nw missing / disappeared along the axis of each page

  HP Laserjet Pro 100 Color MFP M175nw. operating on Windows 7 from my wireless laptop. Just bought this again a few days ago and every page of the printed word has about 20mm wide streak lack of feeling running down the Center. What can I do to fix this? I tried printing a page a couple of times of cleaning and the print quality too a few times Menu color grading, but that made no difference. I use a Premium quality paper for use of the laserjet printer. Could someone please let know me what I can do. Thank you in advance.

  Hi Watcher35,

  I see that the Laserjet Pro 100 ACM M175NW new is missing print in the middle of the pages, you ran cleaning and color calibration, but the issue is not resolved.

  This would be a specific example of the question: but with the 'Bb' would be completely missing?

  This HP document: solving Print quality problems can if you take some of the same steps you did already, I suggest you don't skip any step.

  If troubleshooting doesn't help not solve your problem, then I would say call the HP Technical Support to see all the other possibilities for you. If you call in North America, the number is 1-800-474-6836 for all other regions, click here.

  Kind regards