LaserJet P3010 printers series wake up at the same time

Do you want a bit of knowledge on how to put up a time of awakening for your Laserjet.

Here are some steps that you can follow that can help.

I hope this helps.

Tags: HP Printers

Similar Questions

  • Cannot restart or refresh my iPhone 7 from the "home" button and the sleep/wake button at the same time

    I'm having difficulty trying to restart and update my iPhone 7 using the Home button and the sleep/wake button at the same time, when I do my phone takes a screenshot of the home screen.

    Should I turn off my Touch ID?

    Basically my home button button and / standby works not together at the same time.

    You need hold the House and turn off the button for 20 seconds, until the Apple logo appears.

  • Windows to wake up at the same time every night

    My computer wakes up to 23:00 every night. The first message in "Event Viewer" is the same thing with each factor of reactivation, i.e. "change reason: time system synchronized with the clock machine."

    I ran the program 'Fix' and a range of other possible solutions, but without success.  Any suggestions on how to overcome this problem?  BTW, I never had this problem on the same computer with Windows 7.

    Thank you

    Ian Jacobs

    Thanks for your suggestion.  In this case, I think I've established that the problem was caused by a program inadvertently set to run at 23:00 every night, but that does not appear as such in the Task Scheduler and also did not highlight as being the cause of the alarm when power-convenience store has been run.  I had given up on finding the cause of the problem and came across the setting in the program quite by chance.  I had the impression that all scheduled tasks would be present in Task Scheduler, but apparently not.  Thanks to everyone who made suggestions to solve my problem.

  • Visa read write on port series independently and at the same time!

    Hi all!

    I need to read and write data to and from a serial port (rs232) independently and simultaneously .

    I'm sorry that I can not put a picture of that, but it's very simple:

    I used "set up the serial port" and forwarded to two while loops, the resource reference.

    a loop is reading data and the other loop is writing data to the port.

    the problem is when the playback loop (function serial reading) waiting for data - it blocks the other loop to run (writing of the serial function is blocked).

    I searched the forum and find this visa open function has 'duplicate session' option - that's what I need?

    If true, can someone explain exactly how to wire and use it in the right direction?

    Thank you very much.

    Guy.

    OK, I found an example that solved my problem: a VI called   serialduplicatesessions.

    The file is associated.

    Here is the link for all cases: http://zone.ni.com/devzone/cda/epd/p/id/1727

  • Can I pair headset Bluetooth and a chest strap heart rate monitor Bluetooth at the same time with the Apple Watch 2 series

    Does anyone know if you can pair Bluetooth headset at the same time and heart rate monitor strap chest Bluetooth with the Apple Watch series 2? I can't find any info about it online. I hope so, because they have everything works without your phone now since it has GPS. Obviously a chest strap heart rate monitor gives you a more accurate reading. And who is running without music? If they want to really all the new capabilities of fitness improved series 2, that this is a must!

    The original WATCH allows you to do this, so I don't see why the series 2 would not.

  • Apple Watch series 2 comes with the same battery life?

    ddoes Apple Watch series 2 come with the same autonomy and 18 hours without sleep tracker device?

    Hello

    Yes - Apple Watch series 2 offers up to 18 hours of battery life.

    Follow-up sleep was not announced as a new built-in feature.

  • Satellite A500 guard to wake up every day at the same time

    I recently bought a laptop A500 and installed Linux it y a. almost everything works fine, but I have a strange problem with suspension. My laptop every time wakes at 08:19. Recently I noticed that sometimes it just turns after that I stopped it the night before. All at the same time, always.

    I know this may seem like a problem of Linux, but I had two different Linux systems installed (Gentoo and Ubuntu) and used two different commands from the terminal. I think it could be something with the BIOS (I don't update or something, it is by default), but I have checked all the options there and have not found anything that could be related to my problem.

    Hello

    Please, read here:

    http://APS2.toshiba-tro.de/KB0/FAQ0302TJ0000R01.htm#

  • I use VISA 5.3 for reading my serial device... my standard equipment is WELL this device will send four messages for only one comand I need all four messages to display at the same time in VISA SERIES READ BUFFER

    I use VISA 5.3 for reading my serial device... my standard equipment is WELL this device will send four messages of single command given to this instrument... and I read messages through VISA series READ... during the race, the VI buffer displays the messages individually...  I need all four messages to display at the same time in VISA SERIES READ BUFFER, in order to find more than this block, I should add from the palette of function.

    Disable character of endpoint detection or make four readings where you concantanate simply the strings together.

  • Read data series and detect the break in series at the same time

    I need to communicate with a serial device that sends messages back, but also sends a break, break, break, break series combo that I need to listen to. I've never worked with before series breaks but the only VI I found which seems to detect pending VISA on event VI with the series Break parameter. I'm not sure that understand how I could detect a break in the series, but also to be reading and writing messages at the same time in the meantime. Isn't this possible?

    If you use multiple loops, I think you can do.  You use 1 loop to check to see if there is data and 1 loop looking for breaks series.  Then use queues, authors of notifications or events to anyone who needs to know what you have experienced.

  • Wired and wireless at the same time HP Laserjet MFP M226dw Pro

    Hi all

    I'll put up an MFP HP LaserJet Pro M226dw.  Connected by ethernet with a static IP address.  I also want to connect to the wireless network but when I try I get the status message: not enabled.  Unplug the network cable in order to activate the wireless connection.

    To me, it sounds as if you may have either ethernet or wireless but not both simultaneously.

    Is this really the case?  AirPrint works however it is best to attach the printer to the wireless company.

    Thank you

    According to this guide "Getting Started", you cannot use both wireless and wired network connections at the same time with the LaserJet Pro MFP M225 or M226 models:

  • 15 n series Pavilion: Pavilion 15 computer n097sa laptop. L and R audio that passes through the two speakers at the same time.

    Hi, so basically, I just upgraded to this laptop 15 n097sa (new to me) of my old sucks, and it's so much better.
    Only, I just noticed that when his left or right is out at the same time the two speakers. I noticed you access with your headphones. the left certainly comes out the left a little more and the right thus respectively, but they always come out of two speakers much.
    To clarify that, the only left channel is coming from the two speakers at the same time, instead of just the left speaker. And similarly for the right channel.
    I only did a real test on youtube videos of stereo test, even I tested it on my old acer before, that came out of the correct speakers.
    I have a sound dts, no matter who is and it could be reduced to just change the settings, but I don't think that's it.
    Does anyone else have or had this problem too?
    I know I'm a sucker for pc, but please go steady on me, your.
    Win pro 8.1.

    will you please and thank you very much indeed, couch.

    Malygris1 wrote:

    Hi there @SofaQueue

    Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff.

    I understand that you are having problems with the audio balance on your laptop, and I am happy to help you with this. First of all, I would say reinstall the audio driver.

    ETC.

    Let me know if you still have problems and view the details of what happens.

    I will mark it as resolved now. Very useful, thanks.
    What I found was the following: I have really no problem at all, it was the parameters of the audio DTS after all.
    Simply turn off the audio improvements and testing showed once again that's all it was.

    Thanks again though, nice to see people are willing to help so much!

    Edit: Is PS it OK to mark my answer as a solution? I don't care if or whatnot, it just is the right answer and makes sense. I'll do it if he lets me.

  • Clear applications open at the same time?

    Whenever I click on the series of the x button to close the open application, I always wonder "there must be a better way to do it", and again, I have not yet found an answer. It seems to be easy to have an option to close all tabs/applications open rather than close individually. If there is a way to do it now and somehow, I missed the memo, please let me know.

    There is no way to close all the applications at the same time.

    There is no X type to close iOS applications 9. You double click on the "home" button and the shot upward on the Preview app window to close the application. You can close many at a time as long as you can get your fingers on two or more preview windows but this is difficult to do on any iPhone except the iPhone 6 and later versions.

    I know you have heard this before, but there is no need to close applications based on you worry about the concerns of its use or battery memory. IOS handles all this on its own. He said that having to open applications from scratch using more RAM and battery power than leaving suspended in the App selector.

  • How to open 2 separate Yahoo mail accounts at the same time? I can do this in Internet Explorer by clicking file | New Session. I don't see how to do this in Firefox.

    How to open 2 e-mail accounts Yahoo separate at the same time, without using an add-on or plug-in? I can do this in Internet Explorer by clicking file | New Session. I don't see how to do this in Firefox.

    You need two independent sets of cookies to achieve and that an extension can do this.

    You can get a second series temporarily passing to private browsing mode and open the current session, but still allows you the same account only one way at the time and you have to identify you again after returning to the first account by stopping mode PB.

  • Satellite L550-117 - how to use VGA + HDMI at the same time?

    Hello
    I have a Satellite/Satellite L550 series Satellite L550 - 117.
    Can I use 2 monitors at the same time, using the function key (laptop screen + HDMI, VGA + HDMI, VGA, portable computer), but I would use "laptop screen", "VGA output" + "Output HDMI" at the same time (for example: to play a movie on an HD TV and work on the other two screens).
    I also want to play sounds on computer speakers 'and' an HDMI output, not the speakers for computer 'or' HDMI.

    Is it possible with this notebook and how?

    Thank you

    Hey Buddy,

    Good idea you have unfortunately it of not possible to use 3 monitors at the same time. You can use the internal monitor and an external monitor but not the two external monitors. This is not supported in the graphics card.

    Then, you use internal monitor, VGA connection or internal monitor + HDMI connection. That s what you can do.

  • At the same time Record several channels in DAQ

    I'm currently configured to play two channels in data acquisition using DAQ Assistant. I wonder what would be the best way to go on the sampling of these channels at the same time, or as close as possible. The vi that I currently use is attached.

    Thank you

    Sawyer

    DAQmx manages the calendar under the hood and does it quite well.  If you want to change advanced sync settings you can, but of course, you will have to abandon the DAQ ASSistant and write a LabVIEW code.

    I assume you are using a multiplexing card right?  The only real solution for true simultaneous sampling is to buy a card that has several a/d converters like the S series cards.

    For the second poster: you do not have the same problem as the op.  It can be implemented in multiple channels.  If you want to help, you must provide further information that "it gives an error.

    EDIT: I bet you are trying to use separate tasks for each entry, aren't you.  If you do, you'll get a resource conflict error.  You must use a SINGLE task and set up several channels in this task to collect more than one signal.

Maybe you are looking for