LaserJet2300dn: "disk not initialized" on HP4240N after adding RAM

Similar Questions

• Flickering screen 17 Alienware r3 after adding ram

  I have a new r3 Alienware 17 it came with 8 GB of ram, I just added ram 2x16gb 2133 corsair.  When I put power back on the screen started to Flash, it is very pronounced in the office when I open the start menu.  I checked the BIOS is updated.  I put the old RAM in and flicker went.

  I checked that this computer is rated for 32 GB, so I wonder what I do wrong or if I need to update other elements to make this work.

  Any help is appreciated!

  Could be many things, software packages to the specifics of the hardware. We usually use Kingston, Toshiba, Samsung and Hynix.

• Satellite A65 freezes and does not answer after adding RAM

  Gents,

  My laptop Satellite A-65 has been upgraded to 512 MB RAM 1024 RAM. He acknowledged additional without any problem memory (as she should be determined according to the manual).

  But unfortunately after 1 day it started suddenly stops, images on the screen freezes, laptop does not at all - only reset (press and hold the power button / stop) can help. laptop computer sometimes is able to work 2-3 hours, but still stops.

  Cover of place of memory is rather hot, fan very often work uninterruptibly. so I can't decide if the problem is in the new map memory or not enough cooling or maybe by changing the version of BIOS (or BIOS setttings) and could be memory saturates and erases itself properly (last note was found on the forumes).

  Experts, to help find the exact reason especcially if you had the same problem.

  Hello

  I m not an expert, but I recommend you remove the new memory module and run the laptop only with the standard memory module.
  If the laptop does not cling and will not freeze then it s a very clear case for me.

  Either the second module is not compatible or defective.
  In my opinion, you need to use brand modules such as Kingston for example. The quality is much better as a module without a name.
  Use additional modules recommended by Toshiba

• Reinstall Windows 7 after adding RAM does not work, if the serial number on the hard drive doesn't go to Microsoft?

  The serial number of the hard drive go to microsoft, I went to reintall my windows after it kept crashing, updated my hard drive, memory, ram.  I think because the serial number is different on the hard drive, it will not be installed.

  System becomes inadmissible has nothing to do with the product activation.

  The probable cause is faulty RAM or loose, make sure that the memory modules are firmly fixed and mounted in banks of memory on the motherboard.

• Looks great in mode live view, but not in Design view after adding php code

  Can anyone help with this?  I have a php with HTML5 page that looks much like the design view, live view and in the browser. I add php code above <! doctype html > and the page goes in all directions in design mode. If I switch to live view, the page looks a lot like new. The above code <! doctype html > is php with zero html completely. It's as if design mode try to read php despite start-up code and tags php in place.

  The only work around, I have found is to place <! doctype html > at the top of the page and view design looks great again, but this cannot be used in the browser as I have the php code that requires it to be the first items found.

  I use Dreamweaver CC 2014

  Any help greatly appreciated,

  Dave

  Nancy, just to update you I had a bit of success by changing my invisible elements preferences.

• Satellite 1800-400 does not start, or crashes after upgrading RAM

  I have the original configuration of RAM for the S1800-400 with 120 MB. I bought a 256 MB RAM with the following description: EXT256-3069/JR, MEM 256 MB RA Toshiba Satellite PRO 4600 series C650, PIII-7500/750/800 #PA3069U (I think the brand is Transcend).

  When I put this slot in the machine, keeping the original and start the computer, it does not start, either on the initial screen of freezing before downloading anything either or that goes to the screen where you can start it in safe mode, but then it does not start.

  I removed the new RAM and it works well again.

  What can be the problem:

  (1) is this new RAM is not compatible with the computer? Based on the selections of the internet service provider, it should be (it's a Portuguese company with their own memory configuration options).

  (2) the computer can work with the original 120Mo and the new 256 MB, or should it be both the same size/brand?

  (3) is there any other problem that I don't have?

  TKS

  Hi Ricardo

  I agree with feliks.
  The module is not compatible and not taken in charge can be responsible for your problem.
  The best way is to use the Toshiba recommended of the memory modules.

• not enough disk space after adding chapter markers

  Hello

  Recently tried to burn a blu - ray disc, all right. But when you add chapter markers the same video becomes a very large file that do not fit on a disc. How can I solve this problem. Help, please.  Thanks here.

  Application: Still CS3

  Video: a photoshop menu with 4 buttons

  4 videos total duration 2 hours

  Disc Blu - ray: single 25 GB

  Hardware: Mac Pro 6 GB 800 MHz, 2x2.8 GHz Quad-Core Intel Xeon

  Video burn without successfully chapter markers. After adding the video become 250 GB markers of chapter in 4 videos (total about 50 markers), and do not take in a single drive.

  Can someone help how to solve this problem?

  Thank you

  Kory

  link to Chapter 1 ending action in Chapter 2

  There is your problem.  Don't, don't.  Chapters automatically flow into the other.  Define Actions to end only for a calendar.

• Satellite Pro L650 - hard disk is not initialized.

  Hello

  I have a Toshiba Satellite Pro L650 and I am having some problems.

  It all started a few weeks ago, I received the dreaded screen black death (windows could start, but then just came up with a black screen and a cursor. After playing well, I thought that a reinstall of windows would do the trick.

  It worked, but none of my pilots have been installed... After much research, I found my Toshiba repair disc. I put in and went to fix it. At half way through formatting the drive, it came with an error, saying that he was unable to delete a specific file, it asked me to reset.

  So I reset, and it came with a screen with "this disc is not initialized, Please initialize now."
  So I pressed Yes, and it resets, it came with the same screen. and again and again.

  So that's where I am. It is only a year old, and already got the replaced disk. I'm desperate difficulty, I don't want it to become a grammage of paper-dear...

  First of all I m wondering why the message appeared saying that the disk is not initialized have you used the Toshiba restore for the OS installation disc or have you used any other Windows disc?

  On the other hand, it might be possible that your HARD drive is malfunctioning, the cursor blinking in the upper left corner is a sign for this fault
  So I recommend you to check the HARD drive. Use a tool like Drive Fitness Test, for example, it helps you to check the HARD disk
  If errors will be displayed so the HARD drive needs to be replaced

• I am installing a seagate 500 GB internal hard drive, when I go to disk management, the drive is there, but I can not format because you know not initialized. can anyone help please

  I am installing an internal hard drive 500 GB seagate on my computer, when I go to disk management, the drive is there, but I can not format because it is unknown / not initialized. can anyone help please

  Try one of the two utilities below to partition and format the drive.

  Partition Wizard Home Edition:
  http://www.partitionwizard.com/free-partition-manager.html
  Note: There is also a CD bootable or versions of the bootable Flash drive:
  CD: http://www.partitionwizard.com/partition-wizard-bootable-cd.html
  Flash player: http://www.partitionwizard.com/bootable-flash-drive.html
  Among the features and functions: create partition, Delete partition, format partition,.
  A partition resize, move partitions, restore Partition after an accidental deletion, convert partition, Explore, Hide partition partition,
  Change the drive letter, a partition active Set, Explorer (content display) of the partition.
  Note: To achieve any task using the "Operations pending" box at the bottom or top left.

  Alternative to Partition Wizard (a bit easier to use, but Partition Wizard and EASEUS have almost identical user interfaces)
  EASEUS Partition Master Home Edition (free):
  http://www.partition-tool.com/personal.htm
  Partition software ALL-IN-ONE and the most convenient hard disk partition manager Kit
  Includes Partition Manager, Disk & Partition copy Wizard and Partition MBR and GUID partition GPT disk recovery Wizard (table) on Windows 2000, XP, Vista, Windows 7 and Windows Server 2000/2003/2008 (32-bit and 64-bit).
  It allows users to resize/move Partition, drive system extend, copy Disk & Partition, Partition merge, Split Partition, redistribute free space, convert dynamic disk, Partition Recovery and much more.

  J W Stuart: http://www.pagestart.com

• vSphere is reporting that the iSCSI disk is empty after adding it

  First, when, after boot iSCSI service on Win7, then vSphere host, the iSCSI (form VMFS) drive often may not appear on the storage. After adding it, it's Ok.

  But yesterday, he deleted an NTFS partition on the physical disk where the image iSCSI file is on another partition NTFS, which totally has 3 primary partitions before, today, after you add the iSCSI drive, vSphere displays an error message:

  Configuring the host error: could not get disk partition information

  After clicking the Ok button, he said: the disc is empty.

  In my view, the virtual disk partition (image file) would not be affected by any change in the physical disk partition. I can't lose my data on this drive. How can I solve this problem?

  Thank you!

  George

  It is a good guide: http://www.vladan.fr/mounting-your-vmdk-disks-directly-to-your-windows-box-how-to/

• Essentials Security 3 will not be installed. After attempting to install he asks me to insert a disk.

  Essentials Security 3 will not be installed. After attempting to install he asks me to insert a disk. which drive?

  Essentials Security 3 will not be installed. After attempting to install he asks me to insert a disk. which drive?

  Checklist: http://experts.windows.com/w/experts_wiki/89.aspx

  and

  See also:
  http://windows.microsoft.com/en-AU/windows/i-cant-install-microsoft-security-essentials - notes
  Step 6 if it does not work.

  Security Essentials Version: 2.1.1116.0
  Where so you Security Essentials 3 of?

• Class not found exception after adding a new image in the folder resources.

  The app works perfectly well on the Simulator and the device. After adding a new set of images, he began to show in every race, on the Simulator and the device, a class not found exception.

  When you try to delete some images to find the cause, I get different classes not found when executing. Compilation and packaging the application generate warning or error. They even get signed. Some of the classes are not exception I get:

  Java.lang.StringBuilder

  NET. RIM. Device.API.UI.UIApplication

  I'm guessing this has something to do with the size of the total image, since the size of each range image from 100 KB to 300 KB, and we talk about only 25 or 30 images in total. Adding image outside of the 'res' folder does not generate the error, but the image is not added to the final files.

  In addition, this application is not large, but when compiling and packaging of the app, it generates and signs 125 cod files. Is this normal?

  I use Eclipse 3.6 (Helios) and BB SDK 5.0.0.25 won win 7

  Any help will be appreciated. Thank you.

  Have you seen this?

  http://supportforums.BlackBerry.com/T5/testing-and-deployment/the-maximum-size-of-a-BlackBerry-smart...

  I would recommend that you download these kinds of resources and put them on the SD card if you take a storage capacity that users will want to keep available for email and others.

• ButtonField is not visible in the Simulator after adding to the HorizontalFieldManager?

  Hi iam trying to view an EditField and and a 'go' button beside it in the same line.  So I added them to horizontal FieldManager but in sumulatro only the search is coming and button is not visible.  If I add the button to directly _mainscreen that it is displayed in the following line. So, how do I make visible button after adding to the HorizontalFieldManager?

  Please give your support. Thanks in advance.

  private BrowserFieldDemo()
  {
  EditField edit = new EditField("", "search",10, EditField.FILTER_DEFAULT);
  HorizontalFieldManager searchBar = new HorizontalFieldManager();
  searchBar.add(edit);
  searchBar.add(buttonField);
  _mainScreen.add(searchBar);
  pushScreen(_mainScreen);
  }
  

  

  You can also limit the size of your EditField to leave room for your BitmapField.  In theory, you need only substitute getPreferredWidth() for your EditField, but you may have to substitute layout() as well.

  You can see an example of the fact of a ButtonField in this thread.

  http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=java_dev&message.ID=7430

  You can also find this useful Thread If you want to go in the direction of Manager:

  http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=java_dev&message.ID=3745

  I found the code snippet according to who uses the layout to make sure you have 20 pixels to the right of the field:

  Protected Sub layout (int maxWidth, maxHeight int) {}
  Super.Layout (Display.getWidth () - 20, this.getHeight ());
  setExtent (Display.getWidth () - 20, this.getHeight ());
  }

• Initially, I downloaded the application and was able to access all my photos by album, photostream, fb, etc.. Now, it will not go all. After you remove the application and try to download it, it says that I have to pay for it (yet) any help would be

  Initially, I downloaded the application and was able to access all my photos by album, photostream, fb, etc.. Now, it will not go all. After you remove the application and try to download it, it says that I have to pay for it (yet) any help would be appreciated.

  Sounds like a question of verification on any market that you have bought PS Touch. Have you tried contacting Google and Apple to see what they say?

• MD1000 attached to MD3000. Virtual disk not on the preferred path

  Hello

  I have a MD3000i box connected to 2 boxes of MD1000, these are connected to a Dell Power Vault Storage server 2003 running.

  Last night I connected the 2nd MD1000 and added in 25 TB of drives worth. I had initially hurt mapping the new virtual disk after 20 minutes or so, I noticed that I had shot the Ethernet cable plugged into the Module Raid 0 by mistake. I plugged it back in and was able to map the drive and started the initialization of disks.

  I came this morning to check how everything is done and found an error on the table. Disk not on favorite virtual path, preferred owner: at location 0 RAID Controller Module. Current owner: Module to slot 1 RAID controller. Group MD1000_2 of disc. Ramdisk: Virtual4.

  Now, it seems that influence the new virtual disk that I created. I checked the path virtual disk property and all the other virtual disks are using path 1 and try that I created to use channel 0.

  The virtual disk seems to be working for the moment it is detectable and to initialize itself in the area of operations of MDSM. I'm under pressure to get the space of storage as soon as possible, so I can't really afford to have to blow the virtual disk and restart the initialization. I'm hoping a simple reboot of the storage array will cure the problem, but I guess I can't do so until the end of the initialization of the disks. I could also remap the path to the virtual disk, but I saw online that it does not solve the problem, and I always have to wait until the initialization is complete.

  Any help would be appreciated.

  Hello

  I deleted the disk group and created a new one that even once, did not help even after that I tried to change the path. I deleted again and created a new and then changed to RAID 1 controller quickly while he was still on the controller 0 (before it came with the failure of the path) as the preferred path that has cleared the error. There must be a mistake with the controller or the wiring to it.

  Thank you