Lasso selection

Similar Questions

• Lasso selection tool has stopped working?

  The PSE9 lasso Selection tool is defective. When I draw a selection, I immediately get a message saying: "WARNING: WARNING: no pixel is selected to more than 50 percent." The edges of the selection will be visible. »

  It's the kind of message that I'd normally get when I select bad figures for feathering. But now the message happens when I use the lasso tool to select an area. When I hit Cancel the message, the selection disappears. But the drop shows that I can "unselect". When I do it and start all over again, I get the same problem.

  I quit and restarted PSE9 to try to solve this problem, but it did not work. Then I restarted my computer Mac, but it does not solve it

  .

  Have you tried to reset the preferences?

• tool lasso select

  This happens when I try to transform a selection for free, someone knows how to fix this?

  

  

• PE8: New layer of the Lasso Selection tool

  Hello

  I chose a pitcure format NEF area. When I press Ctrl + j or right click, a new layer is not containing the selected area with the "New selection" icon turned on.

  I'm doing something wrong?

  Thank you very much.

  Make sure the file is not 8-bit and 16-bit.

  Image > Mode > 8 bits.

  MTSTUNER

• Problem with the selection lasso, quick selection and error messages (saying selection is empty)

  Hello

  I'm trying the sect a person on a picture and paste it into this collage photo, I'm working on that. First I tried to use the quick selection tool, but I guess my man I'm cutting too many colors: when I use the quick selection, it immediately goes into a rectangle around the entire image. I even tried to paint the rest of the picture in black with the exception of humans, but always the same results with the quick selection. Then I tried the lasso, but nine times out of ten, he would stop and do an odd choice. When I finally got a good lasso selection (done after much cursing) then CS6 told me that 'the selection is empty' . What? I made a new layer before I made the selection.

  Can you help me solve these problems?

  I just downloaded CS6 just a day ago and have a lot to learn, but I worked with Paint.net and Paint Shop Pro for the past two years, so I'm familiar with paint and photo editing software.

  Thank you

  Kelly

  [amended to be readable by an admin text]

  Please do not submit your application in green. It's a useless distraction.

  You are trying to make a selection in an empty layer.

  Back to the image of the layer, not the empty one that you created, and you will be able to make a selection.

  Once selected, press Cmd + J to your object selected on a new layer. I think that's what you had in mind.

• How to select the pieces of my image in black and white?

  How to select the pieces of my image in black and white? FOW example letter J or the circle or the two together?

  

  It's actually pretty easy, but I have to assume that you know a few basics in Photoshop

  (1) open your existing image

  

  (2) double click on the layer and the 'layer style' appears. In the mix if area set the sliders so the whites in the image disappears

  

  You will be left with just the black elements in design

  

  (3) duplicate layers

  

  and merge them together

  

  to give a standard layer

  

  (4) ctrl or cmd click on the layer to select and create a layer mask

  

  (5) you now have a mask of the image. Duplicate the layer, click alt or option, click on the layer mask to call

  

  (6) the blacks and the whites are not completely black and white for the use of levels to adapt to the absolutes

  

  (7) now you have to decide what you want to select. In this case, I chose the lettering and simply covered everything else to the top with black. You do this by lasso selection and fill and items when it's delicate brush just the details with a black brush "hard." .

  

  (8) at this stage, you can do what you want you have a layer mask. So you can color the text for example

  

  or place in a background color and apply a layer as Beveling effect

  

  Hope that makes some sense. It is much easier to do than to describe.

• Select and update the mask of the new cc

  I make a selection using the lasso tool > go to the Select again and the mask. When this window opens, my selection is a party! Tried to go directly to the Select and mask and make the lasso selection, and the moving dotted line disappear until I can feather! What I am doing wrong, please.

  Sheila

  Glad it worked for you...

  Please mark my answer is right

• Selection and masks:

  Selection and masks: Hi, if I want to choose a guided image with selection and masks nieut run my mouse over the action. so I can not I can refine selection lasso-select, but I lose if I released the mouse I have the tools to take back how to solve this Emiel sincerely

  Two thoughts:

  • Start by watching this tutorial on the Select again and the mask: Select and mask in Photoshop CC Taskspace (15.5) "Julieanne Kost's Blog of »
  • Update to the latest version, published this week. There were Select bugs and mask in the original version: Photoshop CC 2015.5.1 update available

• Why my photoshop keep black and white lines when I use my lasso tool?

  Why my photoshop keep black and white lines when I use my lasso tool? He has never done this before last night. She girls all lasso select box with (what it looks like almost to) Watch black and white lines. then when I go to zoom out, my zoom option begins to ruin where you click and move your mouse to zoom in and out with ease but where to click to zoom back (several times).

  Can someone help me?

  It looks like an old video driver bug.

  Update your video card driver from the website of the manufacturer of the GPU (Intel, AMD/ATI or Nvidia).

• It happens to someone else with the selection tool

  I can't move the selection after you make a selection in Photoshop CS6?

  I use a PC in Windows 8. AMD A6-3670 Radeon HD Graphics 2.7 GHz. 64-bit OS.

  This seems to be a new problem in the last two weeks.

  Thank you.

  It seems that you just want to move the selection outline and not the content inside the selection, is that correct?

  For the rectangular selection tool and other tools such as Lasso selection, you have to have new selection in the options toolbar made for just the outline of the selection.

  

• lasso tool entry

  Photoshop CS 5 EPI seizes when used only the lasso selection tool

  Finally found a solution.  Hold down the left button of the mouse, click on the lower left area where the properties are and hold for 10 seconds. Lasso now works. Shish!

• Can I click on an object as a starting point for slide without selecting it?

  Hello

  I would like to know if there is a way to begin to drag the point on the surface of an object without selecting it.

  Thank you in advance.

  It would have helped you said what tool you drag with.

  like making a rectangle that represents the area of selection

  You're talking about what we call to make a selection rectangle.

  I'm looking for a way if I can just click on a surface of an object without actually clicking on it so I can just start dragging carefully.

  Read what you just said: '... ". Click on a surface of an object without actually clicking on it... »

  What you ask is really: is there a way of mousedown on an object with one of the selection pointers without selecting the object, in order to begin a selection rectangle?

  This is essentially what the Lasso selection tool. But it is not rectangular selections and cannot be forced to do so (no 'elastic' modifier as in Photoshop). He also disrespects of clichés, if it's important to what you're trying to do. Nor can he will strive to select entire paths he touches by pressing the Alt key, as can be done with the white pointer.

  We could probably expect black and white pointers to work like this:

  1. click on an object. (The object is selected.)

  2. press SHIFT and mousedown (not mouseup) on the object. (The object becomes unchecked.)

  3. start to drag. (Starts a selection rectangle).

  But they do not.

  Selection of Illustrator pattern is and has always been the worst class among public drawing programs. Needless to multiple tools, badly implemented, that all together can not do a single tool can do in other programs.

  Much trouble of selection is avoided in other programs by providing a "touch sensitive" toggle in other words, the ability to define a selection tool to select all its renowned keys, (such as Illustrator) or to select only objects that completely surrounds the marquee.

  For a long time, I suggested that we should be able to "convert" any path given to a selection or a path to the Cup. (Illustrator may not correctly cut its own paths, either.)

  IE7

• Remove the gradient of the bands

  Hello

  I use Photoshop CC and I'm currently trying to remove some background gradient banding seen in some photos of company style I took recently. I basically added a circle of the gradient from light to black background.

  Seen on computer the gradient works perfectly - but, seen on a mobile phone (which they would be probably considered - on apps such as linkedin, etc.), the strapping seems to be very apparent.

  I tried different techniques such as the creation of a layer of dithering while working in 16-bit: follow this guide (Photoshop Actions to correct the banding of gradients Photoshop.):

  • Create a new layer (should be the highest).
  • Fill it with 50% graysolid.
  • Making noise: filter > noise > add noise. The parameters are amount : 25%; Distribution uniform =; Monochrome checked =.
  • Now click on Command-F (Ctrl + F on Windows) to repeat the noise on the same layer filter (if you're curious to know why, look at histogram of the layer that you perform the noise filter the first and second time).
  • Set the linear lightlayer. An excellent mode of fusion for this purpose. The half dark shadows is implemented as reversed linear subtraction (as burn linear) and half lighter than the linear addition (as linear density).
  • In the palette layers , define magic values for the layer Opacity to 1% and opacity of fill at 19%. You could (but not, really) read the note below on all the gory details *.
  • We finished. Now lock the layer (the icon of padlock in the layers palette), so it will not react to the mouse input. You can forget that it exists.

  I also added the noise for the gradient layer to see if it seems to help - but it isn't really.

  I would then merge all layers together, resize 960 x 640, convert to 8-bit and save.

  Any advice would be greatly appreciated.

  Photos below:

  Image of the computer:

  

  

  Thank you

  Stephen.

  Without being able to test different approaches to solve the problem before posting one, all that is available is here to work with the pictures that you posted.  In the original and in the second image (which increased the contrast that makes the most noticeable banding), making a lasso selection drop the offending area and applying a Gaussian blur has eliminated the banding. Not fancy, but it worked as a final step. Maybe it's worth a try.

• Additional tools trolling?

  Hi guys someone of you know why does take so long to open additional tools? I mean, it's the additional tool are displayed when you press and hold the tool marquee/lasso/Selection etc.

  On my school pc, it takes only 1 second to open the additional tool but my mac takes 3 sec

  That the way it works. You can also right click and they will be displayed immediately.

• Movement of waving?

  Hello

  I'm sure it's a simple question and I just get the termonology evil because I can not find the answer by searching here or on google.

  I just want a clip on the timeline and everything that comes after it. So if I move it to the right instead of down the next clip she passes (as well as the next clips) to the right. And if it moves to the left, I would like the Staples more late to follow without leaving a gap.

  How can I do this?

  Thank you!

  kairosmatt

  I just want a clip on the timeline and everything that comes after it.

  Lasso-Select the clip and all the tous les clips clips to the right, then drag.

  or:

  Insert a clip into a sequence

  Extract and paste pictures