Last Transaction report
OfficeJet 4620. How do you turn off 'automatic' last report of operation impression? I want to only print manually if I need one. Big waste of paper, if you can not turn it off.
Dear SouthStar
1. from the home screen, press the (Setup) button.
2. using the buttons on the right roll, to select Fax Setup, select Fax reports and then select Fax of Confirmation.
3. highlight and select OFF
Good luck!
Tags: HP Printers
Similar Questions
-
Discoverer Plus - DECODE 10 last transactions or last 10 days of my data
Dear all
Can someone help me reqeust below (syntax DECODE)
I need to create a report for a specific number of days or transaction.
Eample 1: last transaction 10 (Base column will be the key transaction number)
Multiple 2: Last 10 days (Base column will be the transaction date)
In addition to the explanation: we might need to get a sales report for the latest issue of 10 bills in the system. I can add in the parameter 10 and will get the last 10 invocies to add 20 or so will get last 20 invoices. Or, we may need to obtain a sales report for the last 10 days issued invoices. So I can add 10 in the parameter and will get the last 10 days the invoices issued. etc.
Best regards
Mr. Zuhair Fardan
Kingdom of Bahrain
E-mail: [email protected]Dear Zuhair
I am pleased to have been of service. When you get a chance tag please my answer as being correct and question mark as answered.Best wishes
Michael -
Using sql developer before 4.x... report works fine
Using SQL developer 4.0.0.13... report fails with ORA-01422
using the actual query to generate awr against the same range of component snap works perfectly
I opened a SR on the question
Thank you
It's always a good idea to open a SR when you are able. I assume that you have already received a response from support. For others I wondered about this, the question is likely related to running the report against a CCR environment, as indicated in the following bug:
Bug 18132564 - LAST AWR REPORT FAILS WITH ORA-01422 IN CCR ENVIRONMENTS
The call of the AWR report requires parameters for a DB and an ID of Instance, so that the report should run, as in earlier versions, for only the current instance, or be modified to run all instances in the cluster.
Kind regards
Gary
SQL development team
P.S.: And, in fact, a discussion prior forum - ai2 4.0-AWR and ASH giving ora-01427
lead following bugs are connected and supposed to be fixed for SQL Developer 4.0...
Bug 17481944 - PERFORMANCE PANELS NEED AWR/ASH/ADDM FOR RAC ENVIRONMENTS SUPPORT
... with the developer commenting
I've added a number instance selection control to the various reports: ASH,.
AWR, difference and SQL. The control is supposed to be visible when the
connection is a RAC system, tests should a RAC.So if you are not on a RAC system, or are on CARS but do not see the selection number instance control, please let us know.
Post edited by: Gary Graham
-
Download the time of the last transaction or time of disconnection from the transaction.
Hi all
I have a requirement to obtain the time of the last transaction incase disconnection of transaction is not present. in a session('XYSCSCSCS') given.
--Below code gets log off time if transaction 'AUTH_LOGOFF' is present. Select to_char(MAX(cpath.REQUESTDATETIME), 'DD-MON-YYYY HH24;MI:SS') FROM usersessiondetails cpath Where cpath.Userkey=1234 and cpath.acctnum='ABCDE' and cpath.transactionname IN ('AUTH_LOGOFF' ) and cpath.sessionid='XYSCSCSCS'
My needs are--Below code gets time of last transaction. Select to_char(MAX(cpath.REQUESTDATETIME), 'DD-MON-YYYY HH24;MI:SS') FROM usersessiondetails cpath Where cpath.Userkey=1234 and cpath.acctnum='ABCDE' and cpath.sessionid='XYSCSCSCS'
1. I want to combine these two queries. send using a single query.
Note. Take and and other details are passed to this request of the main request. This sub request shouldn't be deeper. Don't want to question several times table with huge data
Please let me know how I can get it.
Thanks and greetings
Nana akkivalli.
Published by: Nana Akkivalli, Sep 29, 2011 15:53One way might be:
Select to_char( coalesce(MAX(decode(cpath.transactionname,'AUTH_LOGOFF',REQUESTDATETIME)), MAX(cpath.REQUESTDATETIME) ), 'DD-MON-YYYY HH24;MI:SS' ) FROM usersessiondetails cpath Where cpath.Userkey=1234 and cpath.acctnum='ABCDE' and cpath.sessionid='XYSCSCSCS'
(COALESCE works as NVL in this case - except that it evaluates only the second expression if you must.) NVL would work as well but will always evaluate the second expression.)
-
Keeps crashing. Here's my last error reports.
I did a reset and I also did a clean install. It always crashes repeatedly.
BP-87b23d69-dda5-470f-aa7c-296602140623 23/06/2014 16:00
BP-cab54dff-93de-4C57-AF11-0b0852140623 23/06/2014 14:58
BP-40d3f319-61ad-4CA1-8048-785ae2140623 23/06/2014 14:56
BP-94ea53b5-0ac0-410a-a1f0-511382140623 23/06/2014 14:56
BP-8388db91-133e-4029-8BBF-33aea2140623 23/06/2014 14:56
BP-3c386205-9db7-416F-aee0-66dc02140623 23/06/2014 14:15Run most or all of the listed malware scanners. Each works differently. If a single
program forget something, someone else can pick it up.Sometimes a problem with Firefox can be a result of malware installed on your computer, you may not be aware of.
You can try these free programs to search for malicious software that work with your existing anti-virus software:
- Microsoft safety scanner
- MalwareBytes' Anti-Malware
- TDSSKiller - AntiRootkit utility
- Hitman Pro
- ESET Online Scanner
Microsoft Security Essentials is a good permanent antivirus for Windows 7/Vista/XP, if you do not already have one.
More information can be found in the article troubleshooting Firefox problems caused by malware .
This solve your problems? Please report to us!
-
A table (last updated report)
Hello
I'm having a problem with the names of columns in the report displayed in a report updated when you use "no data is found.
I've recently updated Apex 3.0.1 to 4.0.1. I use the Standard report template. The report itself
updates correctly.
In version 4, the names of columns in the report are displayed when no data is found, but the version 3 are not. Is there a
additional option somewhere that I need to choose to hide the names of the columns.
It will work if I select * "use generic column names (analysis of query runtime only)" * in the source section of the report. but
you wonder why it does not work when you select * "use specific query column names and validate queries."
Maybe it's a bug?
Any help would be appreciated.
Kind regards
RyanRyan,
You can use the generic columns with tabular forms, tabular forms must derive the query column alias names. And features client-side add-line only works with tabular forms. You might be able to get an existing tabular in a State where you have changed the column to be generic, yet always had the feature of adding line of work, but it is certainly not something we would encourage.
Kind regards
Marc -
HP Officejet 4630: How can I fix the time when sending a fax?
I sent a fax this morning and the "last Tranaction' PrintOut showed the correct date but once '17:32 ' when the fax has been sent a 09:30. How can I correct the record gap of time? I use a HP Officejet 4630.
K.C.
Hello @berliner1945,
I would like to help you today with the time setting on your HP Officejet 4630 e-all-in-one printer for your "last transaction" reports to the fax will be accurate. Please follow the steps below.
- On the front panel of your printer select the down arrow until you see Preferences
- Select OK in preferences
- Arrow down until you see the Date and time
- Click OK on the Date and time
- Adjust your Date and time accordingly. Because your date is already correct just OK it and you will be able to adjust your time.
Please reply to this message with result to alter time. Good luck!
-
"Reading DMA Ext" SMART error reported for a 27 "Mac (model end 2013)
Hello
I have experienced a strange behavior in last week, where my iMac starts upward normally, but directly obtained subsequently very slow and lazy. Each program showed the wait mouse cursor und switch between programs by using the Task Manager did not work. If available, I could click through the mouse on a different program of an application window, but only to bring in the und before then the wait cursor shown here as well.
I had to reboot several times, until all behaved as usual.
I checked the State of the disk hard und SMART monitor indicated failures during the power on unit (UNC at LBA). And it seemed that this error has occurred several times (once at the start of the iMac, I retried several times).
I installed the tool console smartctl to get more detailed information and it reported an error count of 534 where were the last 4 errors of this type (history does not seem to store more errors). The last error reported was of type READ FPDMA queued (global error at LBA UNC).
I ran a SMART long test, which passed without error.
And if the system boots properly, there is no indication that the hard disk has a problem.
Someone knows something similar and has a suggestion, what to do? Is there something wrong with the hard drive, controller, plugging in the cable?
I really appreciate your thought and suggestions about this strange behavior.
Thank you for your support in advance!
Best regards
René
Here some information copied from the smartctl journal:
----------------------------------------------------------
= START OF SECTION INFORMATION =.
Phone model: APPLE disk HARD ST1000DM003
Serial number: S1DCF1AX
LU WWN device ID: 5 000c 50 061b9b612
Firmware version: AP18
[User capability: 1,000,204,886,016 1.00 TB bytes]
Sector size: 512 byte logical, physical 4 096 bytes
Rotation speed: 7200 RPM
Form factor: 3.5 inches
Device is: not in smartctl database [for details: showall - P]
ATA Version is: DCC-2, 3-ACS T13 / 2161 - D revision 3B
SATA version: SATA 3.1, 6.0 GB/s (current: 3.0 Gb/s)
Local time is: Sun Jul 10 12:04:36 CEST 2016
SMART support is: available - device has SMART capability.
SMART support is: enabled
= START OF SECTION ERROR =.
Error 534 to disk works to life: 6143 hours (255 days + 23)
When the command that caused the error occurred, the aircraft was active or inactive.
After the completion of the order has occurred, the registers were:
ST ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 70 b4 76 01 error: UNC at LBA = 0x0176b470 = 24556656
Orders, leading to the command that caused the error were:
CR EN SC SN CL CH DH DC Powered_Up_Time command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 20 70 76 41 00 00:27:49.218 LU DMA EXT b4
25 00 20 70 76 41 00 00:27:45.476 LU DMA EXT b4
25 00 20 70 76 41 00 00:27:41.811 LU DMA EXT b4
25 00 20 70 76 41 00 00:27:38.207 LU DMA EXT b4
25 00 10 88 08 40 00 00:27:38.204 LU DMA EXT c6
...
Error 530 to disk works to life: 6143 hours (255 days + 23)
When the command that caused the error occurred, the aircraft was active or inactive.
After the completion of the order has occurred, the registers were:
ST ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 70 b4 76 01 error: UNC at LBA = 0x0176b470 = 24556656
Orders, leading to the command that caused the error were:
CR EN SC SN CL CH DH DC Powered_Up_Time command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 20 70 76 41 00 00:27:34.254 LU FPDMA queued b4
60 00 10 88 08 40 00 00:27:34.254 LU FPDMA queued c6
60 00 10 18 22 20 40 00 00:27:34.254 READ FPDMA QUEUED
60 00 10 a8 c7 1 d 40 00 00:27:34.254 READ FPDMA queued
60 00 08 ff ff ff 4f 00 00:27:34.150 READ FPDMA queued
It's a lot of information that virtually no one knows what to do with... but my guess is that everything points to a failing hard drive.
-
Firefox worked earlier today (August 19, 2013 6:30 pm EDT). When I opened Firefix after it IS 9, Firefox has attempted to perform an update. No error was given, but now Firefox does not start. Run a Windows 8 machine with all the updates and current security with no malware known on my system software.
When I try to start Firefox, the system shows the circle of"work", but then nothing. I created a new profile and got Firefox to start, but whenever I try to go to a website, Firefox crashes.
The last 2 reports of incidents of today:
InstallTime20130814063812 (content: 1376962029)
LastCrash (content: 1376969373)Firefox IS working with Windows 8 in Mode safe (I got a message saying Firefox had not been closed properly) with a new profile. If I used an existing profile, Firefox would start and then close when I went to ANY website or any just not start. I shouldn't be no CRASH REPORT has been generated, just a code updated in the LASTCRASH file.
I have created a new profile, turned off all plugins, redonfigured my security suite of network to start automatically and restarted normally. When Windows came, I launched Firefox with the new profile, went to a few sites only to confirm it worked and then activated the security suite. No problems. I then reactivated some of my plug-ins. I had problems again when all the following plugins have been re-activated:
-- Java Development Toolkit 7.0.250.16 10.25.2.16 -- RealDownloader Plugin 16.0.2.32 -- RealNetworks RealDownloader 1.3.2.28 -- Shockwave for Director
With these off and the new profile, FIrefox is now working normally. Thank you!
-
Report of panic stay after a clean install (MacBookPro3, 1 mid-2007)
Hello
My mac is often restart with a kernel panic. Often when I use safari with several tab reading or video.
Before clean install I try 'associated web' application unistall like Adobe flash player, add the block, but the problem remains still.
I try to fix it by clean install, but the question still remains with the "clean" os (in my old data, configuration, preferences, etc.).
So I think is a physical problem, because it is an old mac, but I need to confirm.
I'll try to downgrade to OS X Yosemite or more to see what Issos are still but I wait download it again for now.
I copy my last panic report on pastebin following link:
Thank you for your future assistance.
PS: Sorry for my English writing.
The logic board is a failure. After 9 years of use, it is time to replace the machine.
-
How can I check the Apple on Apple Watch pay transactions
I use Apple Watch to pay for public transit.
How can I check the transactions I do using Apple Watch?
Hello
It is not currently possible to view your transaction history pay Apple on Apple Watch. Confirmation of transactions is provided timely via your card / bank statements (as it would if you were using the card directly).
Apple pay collects no information concerning the transaction that can be linked to you. Payment transactions are between you and the Merchant (or the application for payments within applications developer) and your card issuer.
If you have the same payment card added to pay Apple on an iPhone or an iPad, then it is possible that payments made through this same map on your watch can be included in the history of transactions (the last 10 transactions) that is displayed in the application portfolio on your other devices. Depending on the issuer of your card:
- You can only view transactions made with this device, or;
- You can see all transactions made using this payment card account (including its use via Apple pay on all devices and the use of the actual card).
When you view a map in the application of portfolio (by pressing the card), the latest transaction will appear under the photo on the card. To see the 10 last transactions, then press the 'i' icon in the bottom right of the screen.
If you prefer that the transaction history is available on your watch, you can inform Apple here:
-
Family safety does not wab browsing activity report
Hello
I set up parental controls for a child almost a year back
and it has worked perfectly until about a month.
Now he sends to empty activity reports
claiming that it was not any web browsing activity.
But I know for a fact that this activity takes place.
Is anyone know how fix/Debug this?
I already checked that:
-Name of the PC comes to /familysafety.microsoft.com
-On the website: date/time of last activity reported for this PC
is correct and up to date
-On the website: 'Activity tracking' is on 'ON' for the child
-On the PC: WPCMon is NOT running (in Task Manager)
If I log in as a child, or like me
-On the PC: Family Safety icon appears in the taskbar.
When I connect as a child popup icon says:
"Family safety monitors your account."
Thank you!
Hello
1. which antivirus program is installed on the computer?
2. what type of internet connection do you use? Is it wireless or wired?
This problem normally occurs when the parental control settings are not configured correctly or recording. You may need to configure the settings to see if it helps.
You can check this by blocking a Web site and try to access it from the browser. Also, make sure that the child's account does not use proxy connections.
You can also update the family safety filter and check the results.
How to update the family safety filter?
http://Windows.Microsoft.com/en-us/Windows-Live/Family-Safety-filter-FAQ?woldogcb=0
Also, you can disable the antivirus if installed some and check.
Caution:
Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.Hope this information helps. Response with status so that we can help you.
-
You can download the old form Digital River reports?
Is anyone can download older reports form Digital River?
For the moment, I see only the last two reports:
September 2010 RIM prod-2511 AllSites_AllLocales
August 2010 RIM prod-2511 AllSites_AllLocalesand we need the older reports to conduct a detailed analysis of purchases reported vs real estate purchase in our backend (through HTTP messages in real time)
Update - I sent an email to accountspayable [at] m6mobile.fr and in 2 or 3 days they have restored the missing reports.
Closed question
-
Oracle provides not able to send a report
Hello!
3 calendar months ago and ibots was natural. However, in the last month, reports created with Oracle answers, they don't send only not with Ibots.
We can plan several ibots, but not to receive all reports.
We restarted the server, but not to work.
There are a few services that we had not considered?
Thank you.
Kind regards.
Daniel Hidalgouser13137772 wrote:
really, I have no experience... but I try with the mode 'trial and error '...Wait a while to see if she would come back without hanging up process.
-
When I am trying to generate the report of transactions process IC > > report option (game of football by account) I see a blank report.
Thankx in advancePlease visit the below mentioned link
Transaction report empty Inter company
Concerning
Nick
Maybe you are looking for
-
What impression Firefox does not open the print dialog window
When printing to our office, we often print on several printers, not just the default printer. When you print in Firefox, however, printing is automatically sent to the default printer and I do not get a print dialog window. I reset the options Firef
-
My iPod classic is very old. I can't put new movies on it. How can I do this?
My iPod was purchased many years ago. I had the chance to get digital movies, but none of them can be placed on the iPod. It is said that it can not be placed on this version of the iPod. Any suggestions on what I can do to fix this?
-
My new A200 can see all networks wireless on our fleet of busines, except ours! Our uses 128-bit encryption, but I updated the drivers for it. Although I expect to see the network in the first place. If I plug a Netgear wirelass LAN card, it not ther
-
How do I know what process should run in the background of a HP Pavilion a1020n desktop computer
There are a lot of processes running in the background of my office, and the amount of memory used varies from 0% to 100%. Seriously, this affects the performance of my pc, especially if I'm trying to run multiple applications at the same time. Is
-
The documents don't print well after replacing the ink cartridge
Original title: HP 6980 printer I just replaced the ink in my HP 6980 printer; now all my documents are dirty printing