Last upgrade vCenter 4.1-5--> com.vmware.converter

Similar Questions

• Last upgrade vCenter to 5.1

  Dear guys,

  I have a vCenter running 5.0 U1b and I would like to upgrade to 5.1.
  I have the following considerations:

  I am protect vCenter VMware HeartBeat 6.5 and it is a 4-node configuration:

  NodeA < = vCenter = > Node B

  NODEC < = database SQL = > node D

  In addition to this, I have a vCloud 1.5 using this vCenter.

  I have a few concerns about vCloud cell = > can I get vCenter without having problems with vCloud 1.5?

  Thanks in advance.

  Daniele

  Looking at the compatibility table for vcenter 5.1 it is not supported with 1.5 or 1.5.1 vCloud. You need to level vCloud to 5.1 and that could be a challenge in itself.

  http://PartnerWeb.VMware.com/comp_guide2/SIM/interop_matrix.php?

• last upgrade vCenter %s error

  I try to do the upgrade to vCenter 4.1 vCenter 5 but it does not work. I have this error:

  Entries by the user DB has no required permissions to install and configure vCenter Server with DB selected. Please correct the mistakes of set-aside: %s
  

  I have all rights on my database, 'his', and _dbo seems to be accurate. Currently my vCenter works well, it's only the upgrade. What is the problem.

  It seems that you are hit with the same problem as in KB

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=2006904

• Last upgrade Vcenter 2.5.0 and a mixed Envoirment ESX

  Hi guys,.

  I have 2 node ESX 3.51 that I manage with a VCENTER 2.5.0. Now come another ESX 2 with a VSphere 4.0 node and I'm not sure about:

  -can I use a recent version of vcenter to manage all ESX 4 nodes?

  -If none can use a last VCenter Client to do?

  -If think to upgrade a VCenter 2.5.0 for last afterwords version can I also connect an ESX 3.5.1 node to it?

  A guy told me that if I have 2 ESX 3.5.1 node connect to a VCenter I can disconnect and reconnect a Client to VCenter again, it's possible! A Vcenter is located on a different physical node.

  There is a problem to do?

  One more:

  It's possible to have a trial for the last Vcenter Client version?

  Sorrel for questions too.

  Thanks in advance.

  ALT

  The client is the same if you connect to a single host ESX (i) or a vCenter.  There is no difference.

• last upgrade vCenter device error

  Hi all!

  I'm trying to upgrade a vcenter 5.0.1 for 5.1.0 application. I use the oracle db

  If I followed the instructions (upgrade to VMware vCenter Server Appliance).

  When I choose "default sso config", I get an error 500 impossible to connect to the remote server: 10xxxxx

  If I don't use default values, I have to enter the DB connection. First test is with the db user sys to the dba.

  This resulted in an error "login as SYS should be as SYSDBA or SYSOPER.

  Then, the next thing: our dba has created a new user with sufficient privileges.

  Following error:

  [+ 2045] INFO | Database validation failed: BadTablespace - Tablespace RSA_DATA missing or not visible by the user.

  [+ 2048] INFO | Return code is: BadTablespace / 9

  [+ 2049] INFO | COMPLETED

  VC_CFG_RESULT = 720 (error: did not find the storage space required for the installation of the SSO.) Please, consult the installation and Configuration Manual on how to create spaces for storage.)

  It's not funny :-(

  Advice how to fix this?

  Thank you & see you soon

  Stefan

  On your oracle database, you will need to run these two files after appropriate change 'rsaIMSLiteOracleSetupTablespaces.sql' and 'rsaIMSLiteOracleSetupUsers.sql '.

  They are available on the iso image available for windows install under the single folder sign On\DBScripts\SSOServer\schema\oracle.

  I don't know if I'm allowed to join these files here in this forum.

  Concerning

  Girish

• Update the host ESX 4.1 before upgrading vCenter 4.0 to 4.1

  Someone sees a problem updating my 4.1 ESX hosts and leaving in the former vCenter 4 Update 1 cluster?  I have rebuilt a new server vCenter 4.1 but can't stop the virtual machines and ESX hosts in maintenance until tomorrow night mode.  I want to put the ESX host in maintenance mode, both in the old server vCenter and 4.1 update and move remove/add new vCenter tomorrow night.

  You can't manage a host ESXi4.1 with nothing less than vCenter4.1.  If your plan will not work.  You must first upgrade vCenter.

  http://www.VMware.com/PDF/vSphere4/R40/vsp_compatibility_matrix.PDF

• com VMware.vcintegrity alert

  Hello

  I moved my 5.5 vcenter server different (2003-> 2008r2) while improving 5.1 caused by the incompatibility of the os.

  everything works fine but the vcenter shows a alert com.vmware.vcintegrity.

  Error message is that I can not receive https://vcsernameOLD:9084/vci/downloads/health.xmlsystemstate.

  By the fact that I do not use the Update Manager I did not move the Update Manager to the new server I just deleted the old server after that I reinstalled the vcenter on my new server with the old database.

  Can someone tell me how can I let the vcenter forget them was a Manager to update and correct the alert?

  I tried to access the https://venterip/mob site, but the plugin is not registered, so maybe a configuration xml entry or an entry in database which is always false.

  Or am I just wrong in my opinion, the error saying that it cannot contact the Update Manager is no longer available?

  Thanks for your help

  VMware KB: vCenter Service status shows an error for com.vmware.converter

• [vCenter Applicance 5.5] Where are the com.vmware.library.vcenter package

  Hello

  I can't find the com.vmware.library.vcenter package in vCenter Applicance 5.5... am I a loser?

  I would like to find as in orhestrator 5.0 (I need some some basic workflows without manually exporting ^^)

  Thank you

  Concerning

  It belongs to vCenter plugin must be installed by default. Could you check in the Configurator Web-> Plugins page plug-in vcenter is marked as being installed?

  Could you try to re - install the vCenter plug-in? There is an option in the Web Configurator-> troubleshooting page for re - install plug-ins on the next reboot of the server.

• VCenter 6.0 upgrade vCenter Server 6.0 best practices?

  Can someone help me best practices for best practices of vCenter server 6.0

  These KB should help you to best practices and upgrade guide

  https://pubs.VMware.com/vSphere-60/topic/com.VMware.ICbase/PDF/vSphere-ESXi-vCenter-Server-60-upgrade-guide.PDF

  Deployment Guide

  https://www.VMware.com/files/PDF/Techpaper/VMware-vCenter-Server6-deployment-guide.PDF

  Best practices

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=2107948

  and new features have the peculiarity of cross

  http://featurewalkthrough.VMware.com/#! / vsphere-6-0

• After upgrading vCenter 5.0 to 5.1 found stored procedure 'purge_stat1_proc '.

  Hi all.

  After upgrading vCenter 5.0 to 5.1 found this error in MS SQL 2008 R2 during the performance of work ""past day stats rollup ": "

  Message
  Executed as user: xx\yyyy. Stored procedure 'purge_stat1_proc' not found. [SQLSTATE 42000] (Error 2812).  The step failed.
  Thanks to VMware KB http://kb.vmware.com/selfservice/microsites/search.do?cmd=displayKC & docType = kc & docTypeID = DT_KB_1_1 & externalId = 2033096
  and http://kb.vmware.com/selfservice/microsites/search.do?cmd=displayKC & docType = kc & docTypeID = DT_KB_1_1 & externalId = 2006097 there is no stored procedure in vCenter 5.1 purge_stat1_proc installation but job day cumulative stats exist...
  Also there is not a SQL script for this procedure in the vCenter Server installation folder in C:\Program Files\VMware\Infrastructure\VirtualCenter Server\sql.
  Anyone have a suggestion? Maybe it's a bug?

  The answer lies in the same article that you are looking to:

  http://KB.VMware.com/selfservice/documentLinkInt.do?micrositeID=&popup=true&LanguageID=&externalID=2033096

  The script of vCenter 5.1 to create this task (job_schedule1_mssql.sql) is supposed to create a job with a single step.  It seems that they have decided to remove the purge step and the rest of the procedure for her, but for some reason, that the work is not always updated and the stage of the procedure call (now missing).

  You can fix it by running the script job_schedule1_mssql.sql by the instructions in the article.

• Download the VMware converter integrated software (plug-in to vCenter)?

  Can someone help me with this? We have not bought the upgrade license vSphere 4.

  Where can I download Vmware converter software integrated (plug-in to vCenter)? Is it comes with Vsphere 4 bundle? I couldn't find this as a bundle of Vsphere 4.0 evaluation.

  Thank you

  the installation of plugin files will be located on the vCenter Server .iso file.  Inside the .iso file, there will be a file converter.    However, if you are not running vCenter 4 you maybe better off using the stand-alone version.

  http://downloads.VMware.com/d/info/datacenter_downloads/vmware_vcenter_converter_standalone/4_0

• Solo upgrade VCenter 5.5 e non esxi host

  Ciao a tutti!

  Al momento e uso VCenter 4.1 host esxi 4.1

  I like to do solo upgrade Vcenter del went 5.5 (Gli nei mesi as host)

  Ho aperto one ticket per sapere is era possibile e mi hanno detto:

  Yes, you can upgrade your server vCenter to 5.5 and you can manage your ESXi host with version 4.1.

  Ho aperto a ticket by the licenza altro e mi hanno risposto ncosi:

  If I understand correctly, you want to upgrade the server vCenter Server to version 5.5 and want to know if the ESXi must be upgraded too.

  If you upgrade the server vCenter Server to version 5.5, then the server ESXi also need to be updated to the same version.

  Morale della favola? posso procedere con is it vcenter?

  Grazie!

  the che cerchi e risposta whichproduces VMware interoperability matrices

  MI pare che sia compatibile con he vcenter 5.5u2 ESXi fino alla 4.0.

  Perched non upgradare gli host good?

  Dai talk anche uno who VMware Compatibility Guide: search system

• Messages of com.vmware.vcHms repeated to install vr2c - firewall.vib

  Hi all

  Current running vSphere vCenter 5.5, 5.5 and 5.8 SRM.  Whenever a host goes in or out of maintenance mode, we see a facility that goes from "com.vmware.vcHms."  Looking at /var/log/esxupdate.log I see a message indicating a connection in the replication WILL:

  esxupdate: downloader: DEBUG: download from https://a.b.c.d:8043/VIB/vr2c-firewall.VIB ...

  What is also happening on the Wan, and it is not desired.

  Any ideas on how to prevent that from happening on the hosts that do not participate in SRM or vSphere replication?

  Ben

  Hello

  Esxupdate log clearly indicates that he uses for proxyurl vCenterServer.FQDN:80 when you download the vib.

  Can check you the connectivity between the host problem and vCenterServer.FQDN:80?

  Kind regards

  Martin

• Upgrade to ESXi 5.0 to 5.1 without upgrading vCenter?

  Hi everyone is my first post here.

  I wonder if I can pass my single host of 5.0 to 5.1 without upgrading vCenter? Basically, what I want to do is upgrade to 5.1 so I can install Windows Server 2012 and trial it. Can I just burn the ISO, boot, the upgrade and the contiune. I've updated the customer to 5.1 already.

  P.S. I read a ton of info on updates etc etc, but I just need the answer to this question.

  Thanks much for any help you can provide.

  Karl

  To add. I tested the upgrade process by installing ESXi 5 in a virtual machine and upgrade to 5.1, it worked. I'm just afraid to do it in my live set up.

  According to the matrix of the interoperability of products VMware, you cannot host with vCenter 5.0 5.1 ESXi, had you first upgrade the vCenter server. Another option is to upgrade your host to ESXi 5.0 Update 1, which also supports Windows 2012 as a guest operating system.

  André

• Upgrade to VMware Converter

  I am a registered product VMware Converter 3.0.3 user and I would like to upgrade the VMware vCenter Converter Standalone 4.0.1 product

  Question:

  I can simply install Converter Standalone 4.0.1 on the existing Converter 3.0.3 or should it be uninstalled manually?

  Thanks for the tips.

  You can install over your existing version.