Late POST in my Pavilion s3420la

Similar Questions

• HP Pavilion dv7-1245 ca battery internal error 601. How can I change the battery

  Hello

  My laptop is a Pavilion dv7-1245.

  It shuts down its own, and after a few minutes, she lights up and displays this error message when starting:

  HP battery alert-

  ... your internal battery needs to be replaced...

  Internal battery (601)

  Sometimes, I need to start my car.

  I bought it two years ago. I just program the hard drive a week ago, causing the original one crashed badly.

  Could you please tell me what specific battery should I buy?

  I read in another post for the Pavilion dv6 you just need to keep it pluged to replace intyernal battery like in a flaslight. Is it OK for my model?

  I would also like to know if the problem to cut down on its own, it is linked with the battery warning or if it is another question.

  Please notify. I use my laptop to work ar House, and I can't afford to buy a new one now.

  Thanks in advance

  Soledad

  Montreal, Canada

  Hello

  You just need to replace the internal battery.

  Here is the maintenance and Service of Guide for your specific model.

  On page 54-55 you will find instructions how to remove the battery and how to install the battery.

  Here you can buy a new one.

• Cannot start the installation of recovery on my Satellite A200 - 28 p

  I'm trying to restore my PC laptop Toshiba Satellite A200 - 28 p (Windows Vista Home Edition) by using the recovery disk of the product supplied with the laptop, no matter what I try to do, I can not run, the only thing that it will allow me to do is to restore the laptop to an earlier date. I have full admin rights on the laptop, there is no virus or other malware on it, all this seems to have happened because he updated with windows vista, about two days ago have uninstalled the updates, but that has no effect.

  I can't find anywhere on the laptop recovery console, but I know it was there before. I tried a lot of solutions available on the web, but none of them work. I used the recovery disc about 2 1/2 years when the laptop crashed and it worked fine then.

  Any help apprecited

  I don't remember how it was with A200.
  You only have a recovery DVD or you could also launch the installation of recovery of HARD drive using F8 at startup (advanced startup options > fix my computer)?

  In any case, the description of your problem confuses me.
  If you are using the recovery as boot drive DVD there is no console repair or some options.
  Installation of recovery on startup, you can only see menu where you have to click on next.
  Please check my lats post on http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=61124

  You see the even when the laptop starts to read the recovery disk?

• LabVIEW 8.5 and Stadium Linkam

  My project uses a temperature control stage TMS 92 Linkam.  I want to establish a connection with this device in LabVIEW 8.5.  Can someone give me a specific instruction?  Your help is very appreciated.  Thanks in advance.

  Hi TeemuS

  Sorry for the late post, he was for a long time, that I have not worked with LabVIEW. Here's the code I used, but it may not suit your needs.

  See you soon

• Cannot create 0 system restore point error code 80070057 x

  Hello

  Please help me with this error:

  Today, when I do a manual create a system restore point, I received the following message "could not perform scheduled task for the following reason: parameter is incorrect." I do a sfc/scannow, but the process has frozen the audit of 100% and has not given any results. I have also uninstall the antivirus software and redo the creation but without success. Please let know me what I can do?

  Thank you

  Negis

  Hello

  Sorry for the late post. I don't try to back up or restore. I just want to create a restore point.

  Netherless, I followed the advice on this thread http://social.technet.microsoft.com/Forums/en/itprovistasecurity/thread/37160397-349e-4aa2-992e-1ffe58b5e51e and renamed the SR file in %windir%\System32\Tasks\Microsoft\Windows\SystemRestore to SR.sav and can create restore points successfully. So I create a restore point, a new SR file is created adjacent to the old (SR.sav)

  However, is it to let the SR.sav file remains in the folder or just delete it? Is it possible that renaming some files to offset it later?

  Please kindly answer. Thank you

  Negis

• How? Resize photos in the Gallery Windows without email?

  Hi all
  I need to know how to resize a photo in the Gallery Windows 1-4 (2). I want to keep this version of Windows. I don't want to send this picture. Rather, I need to resize the photo, save to my computer for later posting in a forum, I belong.
  The only option I see for resizing is in email. Ideas?
  Tina

  Hi all
  I need to know how to resize a photo in the Gallery Windows 1-4 (2). I want to keep this version of Windows. I don't want to send this picture. Rather, I need to resize the photo, save to my computer for later posting in a forum, I belong.
  The only option I see for resizing is in email. Ideas?
  Tina

  ==================================
  Maybe this article will be useful:

  Resizing Photos in Windows Live Photo Gallery
  http://blogs.msdn.com/PIX/archive/2007/11/30/resizing-photos-in-Windows-Live-Photo-Gallery.aspx

  If this is not the solution you ae looking for...
  the following free resizer might be worth a try:

  VSO Image Resizer
  http://www.VSO-Software.fr/products/image_resizer/

  VSO Image Resizer: tutorial
  How to resize my images and photos?
  http://www.VSO-Software.fr/products/image_resizer/how-to-compress-photos/how-to-resize-images-Guide.php

  John Inzer - MS - MVP - digital media experience

• Dell Inspiron 17R 5720 does not work with the charger. Charger is not recognized. No problem with charger.

  My Dell Inspiron 17R 5720 does not recognize charger. And unfortunately my warranty expired 2 months ago.
  It was plugged and work in the morning, but then in the afternoon I noticed he was running on battery only. It does not start without battery (charger just plugged).

  1 this is what I did to debug. Me and my brother, we bought the same computers Dell laptops at the same time a year and a bit ago. That's why a debugging purposes, it was good.
  I took my charger and plugged into his computer. And it works. Certainly not the charger problem I guess. And when I plug the charger my computer, green light is still on the charger. And I have the original charger provided with the laptop.

  2. now, laptop is running on battery only, so that means that this motherboard works. I think so.

  3. the next thing I did was charger disconnected and removed the battery from the laptop. Then I pushed and hold the "Power" button for 45 seconds to pay a royalty to the flea market. Charger plugged in but laptop will not start.

  4. then I booted the laptop on battery, went to the BIOS and check if the charger is recognized in the BIOS. No, it does not recognize charger. So, if this isn't a charger so what else can we?

  5 laptop has no strange smells so I don't know if something happened with the motherboard, but I guess that motherboard is ok because it works battery.

  6. I was thinking of updating the BIOS, but I can't do it, because it will be not be updated then the laptop runs on the battery, it needs to be plugged.

  Now I'm stuck. I don't know what I can do. I'm willing to spend a little more money on it to try to fix.

  If someone had such a problem in the past please let me know what you have done and if it fixed it.
  Or if anyone has any other ideas, I will be happy and appreciated the help.

  Hello and sorry for this late post. Just had this problem... If there is nothing wrong with the AC adapter, it's a software problem.

  Close the laptop... Unplug the AC adapter / CC... Remove the battery... Plug the power adapter... Start the laptop... Go to the control panel... Find and select the Device Manager... Batteries, left click... Uninstall Microsoft AC Adapter, uninstall Microsoft ACPI compatible with battery control method... In fact, uninstall all you can under the batteries, but that should be all there is. It will be re - install when starting... Stop cell phone... Remove the AC adapter / CC... Replace the battery... Plug the power adapter... Start the laptop... Now, everything should be good.

• Unable to send mail from Yahoo mail Surface RT application

  For several weeks, the Soft Surface mail has posted a message saying that it is currently impossible to send e-mail on my Yahoo account.

  He receives mail from Yahoo.

  My other devices (desktop PC, Blackberry) had no problem.  In addition, there is no problem ending by email from the application of Surface IE.

  So, what gives?  I have no idea to ask yahoo on this issue.  In addition, I suspect that it would be unproductive to ask them.  There must be something on the Surface since the other devices work correctly.

  I can't be the users only Surface like that wrong with Yahoo mail.

  Does anyone have any info or suggestions?

  I could solve this problem.  I removed the Yahoo account since the mail app and then it added back as if it were new.  At least for the moment, which seems to have solved the problem and I can send by e-mail.  I'm still puzzled why it happened, but maybe I should be glad it is fixed with minimal effort.

  With respect to the application of mail, I love because it is bigger and clearer to read and use than using IE page.  Yes, IE works, but it's just a little small and so be more careful when clicking, etc.  More difficult to use the IE window without a mouse or a stylus. I normally use a mouse but occasionally led her to use the keyboard with no mouse on the screen and find my fingers are clumsy to hit the right spot.  The mail application is therefore easier in this regard.  But I agree IE works fine.

  Thank you.

  Update - see later post.  It happened again, the next day!

• Why SSO?

  If it is late, posting this query to better understand:

  
  

  Why not just use Kerberos based authentication on, who also work from the sessions of tickets in function, instead of having a new SSO architecture?

  The real question is why not? In large environments you need something to control the authentication/certificates/etc. SSO is in this way so that people need not maintain AD or other items unrelated to virtualization. IN large environments, it synchronizes the nodes of management wrt to the users/passwords and hang AD.

  Something was needed that's for sure. But not everyone keeps a kerberos database environment or includes same kerberos. SSO doesn't need this level of knowledge and is specially designed for VMware management tools.

  Best regards

  Edward Haletky

• Reason for exception Capacity Planner system

  I recently completed an assessment of the capacity of 55 physical servers.  When I created the evaluation report, 47 55 systems were noted as 'System of Exceptions'.  In the body of the report and the reason for all the 47 exceptions is "the system belongs to several groups.  Can someone explain what indicates this meesage?  It would seem, exceptions are being built not for reasons of performance, but for something configuration or procedure that might be corrected-enabling systems to include.

  Sorry for the late post. I was working with mhillard on another assessment, so we discussed and corrected the exception error in server list by creating a ministerial group and added all the servers in this group, then their target in the screenplay and all systems were candidates for virtualization. You did good that there are several groups by IP subnets.

  Thank you!

• Clipboard.setContents problem

  Hello
  
  I'm stuck with a Clipboard handling question and the problem is that if I do a NBS, it works fine, then maybe I should put here all my code.
  But to start, it can be faster if someone could please take a look at the short thread on the link below that I have the same problem:
  http://www.velocityreviews.com/forums/t404553-Clipboard-setContents-destroys-Clipboard-getContents.html
  The guy has solved the problem and wrote:
  ".. the process was not executed in its own thread, it seemed to stand himself when it came to the Clipboard owner change. Which is strange (for me) because as long as the ownership of the Clipboard don't pass it to my program, Clipboard remained current well. »
  
  I don't really understand, what it could mean: "the process was not executed in its own thread?
  
  Thanks in advance.
  
  (In my program global hotkeys are defined with the JIntelliType API, and they launch Clipboard operations, the mouse and keyboard.
  I'll try to reproduce the problem with the least possible code a later post.)

  lemonboston wrote:
  This thread is 4 year old, so I'm not sure. In my opinion, the best perhaps if I put in place a code which produces the question and post it here.

  I agree with that. Those who back old posts and say "I have the same problem" is usually wrong. Specifically, they usually don't get all the answers. So, Yes, ask your own question with your details.

• SELECT from Bulk INSERT - Performance Clarification

  I have 2 tables-emp_new & emp_old. I need to load all the data from emp_old to emp_new. Is there a transaction_id column in emp_new whose value should be extracted from a main_transaction table that includes a column of region Code. Something like -
  
  TRANSACTION_ID REGION_CODE
  ------------------------- ------------
  100. WE
  AMER 101
  APAC 102
  
  My bulk insert query looks like this-
  
  INSERT INTO emp_new
  (col1,
  col2,
  ...,
  ...,
  ...,
  transaction_id)
  SELECT
  col1,
  col2,
  ...,
  ...,
  ...,
  * (Select transaction_id from main_transaction WHERE region_code = 'US') *.
  Of emp_old
  
  There are millions of rows that need to be loaded this way. I would like to know if the Subselection to fetch the transaction_id would be re-executed for each line, which would be very expensive and I'm actually looking for a way to avoid this. The main_transcation table is pre-loaded and its values will not change. Is there a way (via some SUSPICION) to indicate that the subselect should not re-run for each line?
  
  On a different note, the implementation plan of the whole above INSERT looks like-
  
  --------------------------------------------------------------------------
  | ID | Operation | Name | Lines | Bytes | Cost (% CPU).
  --------------------------------------------------------------------------
  | 0 | INSERT STATEMENT. 11 M | 54 M | 6124 (4) |
  | 1. FULL RESTRICTED INDEX SCAN FAST | EMPO_IE2_IDX | 11 M | 54 M | 6124 (4) |
  --------------------------------------------------------------------------
  EMPO_IE2_IDX-> Index on emp_old
  
  I'm surprised to see that the main_transaction of the table is not in the execution plan at all. Does this mean that the subselect is not executed for each line? However, at least for the first reading, I suppose that the table must appear in the plan.
  
  Can someone help me understand this?

  Why the explain command plan includes no information about the table of main_transaction
  Can someone please clarify?

  As I said originally (and repeated in a later post) - probably because PLAN_TABLE is an older version.
  More recent versions of PLAN_TABLE are required to correctly report "most recent" functions implementation plans.

• Adobe Distribution Services horror?

  I'm looking in the new distribution Services made available by Adobe and Gigya. My workflow is pure AS3, using FDT, so it made sense to download "Actionscript library" of the choice of the options available here: https://www.adobe.com/cfusion/entitlement/index.cfm?e=distribution

  The downloaded zip file contains a single class. I must say it is one of the most misspelled class files that I've seen in a long time. Let's take a peek:

  • An error in line 212 - the variable 'isInitialized' is instantiated with a * = operator, rather than be typed as a * wildcard.
  • An error in line 277 - closing of a class definition must not end with a; delimiter.
  • The name of the class and therefore also the constructor, begin with a lower-case letter.
  • A private static method arbitrary received a first letter capitalized (CreateServiceLoader)
    
  • There are 3 unused (MovieClip, ErrorEvent and IOError) imports.
  • Variable 'serviceInstance"on line 260 is not fully used.
  • There are a lot of 'Magic Strings' used in the whole of the class.
  • Various commented lines, the names of questionable methods (wait4Stage?) and the countless exceptions to standard Flex Coding Conventions.

  Usually this stinks, at best, amateurness. I can't wait to start working with Distribution Services, but this put me in a big way. I can see the class was written by a Peleg Eyal of Gigya, and not Adobe, but I am always surprised to see that adobe should join this somehow. It of to try and developers to push the path to use Flex/Flash builder rather our own favorite development mode?

  If anyone can provide info on what, exactly, this class is designed to do; why it is written so badly; and when we might see a decent update to it, it would be most appreciated.

  Hi _duncanhall_,

  Thank you for sharing your concerns in this forum. Many of your points are valid, and I will address below or in a later post.

  I can relieve your anxiety about the hidden motives. Nothing in the class must or will push developers to use Flash builder.  The goal of this class is to orchestrate the different security sandbox code and ensure that a limited form of cross domain scripting is allowed without compromising safety.

  We will examine this approach and I hope to come up with an approach that needs less "magical". "." In the short term, we will probably offer just a .swc you can statically compile in your code.

  Some 'mistakes' encoding (for example, line 260) are required to run the allowDomain method in the context of the field of the safety of the SWF Campeau.

  Other things are just oversight on our part. Even if the white space of the line 212 between the * and the = is not "significant" white space from the perspective of the ActionScript language parser (it is always parsed as a type with an assignment statement), but it's really bad from a readability perspective. WWE will correct this.

  We discuss the choice of capitalization. The intention here was to make the class which is actually a proxy look like a package so that the calling code can look for 'smart' as in:

  com.adobe.fps.distribution.services.XYZ

  It looks like a path of the package but 'distribution' is actually a class that dynamically load services and the proxies from them. We will update our community once we took a decision on a more general framework of service. Please stay tuned.

  Thanks again for the sharp eyes and we help to improve services.

  Joerg

• HP PAVILION: / WIFI AND BLUTOOTH BOTTON/ICON IF POSTER NOT IN PC SETTING (CONNECTION) IN WINDOWS 8.1 HP PAVILION

  WIRELESS CONNECTION - WI/FI AND BLUTOOTH BOTTON/ICON IF POSTER NOT IN PC SETTING (CONNECTION) IN WINDOWS 8.1 HP PAVILION.

  THE SCREEN ALSO SHOWS

  PC SETTINGS > CONNECTION >... HE DIDN'T THERE WAS NO WIRELESS OPTION ON THE SCREEN... ALSO

  PC SETTINGS > CONNECTION > AIRPLAN MODE > WI - FI > WE WOULD NOT FIND ANY WIRELESS DEVICE...

  PLEASE SOLVE THIS PROBLEM

  Fortunately, I solved this issue yesterday... see below

  1. the ralink WiFi Adaper uninstalled form Device Manager

  Device Manager > network adapter > Ralink WiFi adaper > right click > uninstall

  2. download the Letest update to HP Support Assistant ralink Wi - Fi adapter

  3 installed 'last version of the Ralink wi - fi adapter' that we have download

  4. After successful installation, restart the computer

  5. change the setting of PC > connection... you can see on screen wireless Wi - Fi icon!

  But... I still have the problem with Bluetooth as

  Bluetooth icon not show in anywere in the laptop screen

  I check... Device Manager as

  Device Manager > Blutooth > I see Bluetooth yellow with trialngle symbol with. sign

  Please solve problem of Blutooth...

  Help me

• HP Pavilion Notebook e101sp 17: best way to charge 10 Windows with the laptop HP software (post regularly update 8.1-> 10)

  My HP Pavilion 17 - e101sp Notebook PC (ENERGY STAR) came with preinstalled Windows 8.1. I later upgraded to Windows 10.

  Although I had Norton Internet Security installed since the bootups earlier, I still have some virus infections from time to time (discovered through runnin ClamAV from a Linux Debian partition, I put in place on the same computer) laptop. After the expiration of the 1 year subscription NIS (I had lost confidence in it right here...) I played around with a few other sollutions.

  In the end, I now have a Windows essentially not fixable (infected) 10. It's not scary for me because Linux is my main OS 'at home' for 15 years now. However, being the standard Windows "de facto" is it much, I still would like to have a copy of own work, installed.

  My question is, in the current scenario, as I mentioned, which of the two is the best way to have 10 Windows installed with all the goodies of HP, alongisde, my Debian Linux system? And what care I would create throughout the process?

  1 reinstall 8.1 can I leave HP recovery disks that I made at the beginning (and hope that does not erase the Linux partitions, I created afterwards - I need more than "hope" in fact, I need evidence-based knowledge on this one!). And then upgrade to Windows 10.

  2 install a Windows 10 fees (from DVD created from the .iso file downloaded from Microsoft), hoping that it activates properly with the key contained in the UEFI BIOS (I think that this 'hope' is pretty much made to knowledge database) and then get all the goodies of HP... by a simple download from the HP site?

  I think option 2 is the safest (and fastest also!) but I'd well informed comment before that I have try.

  Thanks in advance.

  Hello:

  Option 1 is the only way you will get to keep the programs provided HP with your PC, and they reformat the hard drive, so you will lose everything.

  Option 2 will put a clean install of W10 on your C:\Drive and you will be able to leave everything intact, unless you format the hard drive.

  If your current installation of W10 has been successfully activated, W10 will automatically activate once you install it again once you're connected to the internet.

  To install W10 in this way, you select the "I don't have a product key option,' when you get to when Windows asks for the prouduct key.

  The only software and you will be able to install the drivers which will be available on the page of the driver and support for your laptop.