Layer panel starts closed

Similar Questions

• Question of the layer panel

  
  When I create a PDF from AutoCAD file, the layer panel is open. Even when I close the cover and re - save the document, the layer panel will be opened the next time that I, or someone else opens the document. If I create the same PDF from another computer, the layer panel is not open. Y at - it a setting that I can choose default which will leave the layer panel closed until I open it? Better yet, none of our customers use the layer panel, is there a way to create the PDF from AutoCAD file without copying the layers?

  Go to file - properties - Initial display and make sure that the Navigation «»

  the tab' option is set to "Page Only".

• Intel graphics and Media Control Panel starts whenever I start

  I use Windows 7. This control panel starts every time that I start and I have to manually close the screen. How can I stop this from happening? This just started to happen after I replaced my hard drive.

  Hello

  Look in the control panel to see if there is an option to run at Windows startup
  and if so, uncheck this option.

  You may need to check with the support of Intel and Forums.

  Intel - Support
  http://www.Intel.com/p/en_US/support
  Intel - community and Forums
  http://www.Intel.com/content/www/us/en/blogs-communities-social.html

  =============================================

  This can help:

  How to change, add or remove startup programs in Windows 7
  http://www.SevenForums.com/tutorials/1401-startup-programs-change.html

  Autoruns - free - see what programs are configured so that it starts automatically when your
  system boots and you log in. Autoruns is also the full list of registry and files
  locations where applications can configure start automatic settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Why are the guides in the layer panel?

  Have always shown in the layer panel guides? I swear that didn't used to be the case. However, adding a new guide throws randomly in the layers panel. Is it possible to hide the guides in the layer panel? Or at least automatically group them into their own group or layer? Guides are not a part of the work, so they really should not be included in the layer panel, or at least not treated like all other vector objects.

  DaveB... wrote:

  Guides are not a part of the work, so they really should not be included in the layer panel, or at least not treated like all other vector objects.

  Guides do not appear in the Panel layers in InDesign; they always have in Illustrator.

  They are (sort of) objects in vector Illustrator you can drag a guide from the rule and release it to a line or create a path and Cmd + 5, it a guide. This weird example has been drawn with the pencil tool and converted into a guide.

  Best example: I can draw a rectangle, Center it on the artboard, Cmd + 5 and have the margin guides.

  

  The answers to your questions are:

  Yes, the guides have always been in the layers panel

  Yes, you can move them to another layer the same way you move other objects (good idea)

  Yes, you can hide them with Cmd; the view menu or the eyeball in the layers panel or right-click, to name a few

  Yes, treat them as any other vector object.

• The layer panel problem

  Layer panel: the points colored on the right side of the layer listthose to choose in order to move/delete objects, are missing. How can I make a comeback?

  You need to trash your prefs to recover the little colored boxes. See replace your preferences

• How to get a second image in the layer panel

  In item 13, I have two images that I want from. I brought here them both of the Organizer to the editor, but I can't seem to get them both in the layer panel to use one as a background. Someone just tell me how to get an image from the photo bin toward the layer panel?

  ligian2505 wrote:

  In item 13, I have two images that I want from. I brought here them both of the Organizer to the editor, but I can't seem to get them both in the layer panel to use one as a background. Someone just tell me how to get an image from the photo bin toward the layer panel?

  Several solutions. I advise to begin:

  You have your two visible photos the of in "basket" (area of the bottom of the screen). Choose the one that will serve as "background by double clicking on its icon. She apparaiit in the editing space. Now, click the second image basket of the in and drag on the edit box.  You have a preview of this new layer, ready to be resized, moved or such. Use the handles of the frame of this image pour what control do. When you post by clicking the green check mark, your new layer should appear in the layers of the screen Panel.

  You can adjust the dimensions etc. without loss of quality; This layer is UN 'smart object' as long as you don't choose "simplifier" (freeze) the layer which becomes a regular layer.

  Some operations on the layers cannot be carried out only after having simplified.

• Use of the persistence layer error: start a nested transaction while already in one

  OWB 11.1.0.6 Designer gives this error when I validate the map or copy an existing map. How to fix?
  
  Use of the persistence layer error: start a nested transaction while already in one. Please contact the Support of Oracle with the stack trace and details on how to reproduce it.
  Use of the persistence layer error: start a nested transaction while already in one. Please contact the Support of Oracle with the stack trace and details on how to reproduce it.
  
  at oracle.wh.repos.pdl.foundation.NestedTransactionManager.markSavepointForCancel(NestedTransactionManager.java:54)
  at oracle.wh.repos.pdl.transaction.TransactionManager.beginNestedTransaction(TransactionManager.java:418)
  at oracle.wh.repos.pdl.transaction.TransactionManager.beginModalInteraction(TransactionManager.java:548)
  at oracle.wh.ui.jcommon.inspector.TabbedPane.startEdit(TabbedPane.java:150)
  to oracle.wh.ui.jcommon.inspector.TabbedPane. < init > (TabbedPane.java:58)
  to oracle.wh.ui.jcommon.inspector.PropertyDialog. < init > (PropertyDialog.java:27)
  to oracle.wh.ui.jcommon.inspector.InspectorController$ InspectorListener.actionPerformed (InspectorController.java:91)
  at oracle.wh.service.sdk.OWBConsumer.dataItemAvailable(OWBInfoBus.java:381)
  at javax.infobus.DefaultController.fireItemAvailable(DefaultController.java:90)
  at javax.infobus.InfoBus.fireItemAvailable(InfoBus.java:989)
  at oracle.wh.service.sdk.OWBInfoBus.produce(OWBInfoBus.java:160)
  at oracle.wh.service.sdk.OWBInfoBus.produce(OWBInfoBus.java:76)
  at oracle.wh.ui.console.commands.TreeMenuHandler.notify(TreeMenuHandler.java:94)
  to oracle.wh.ui.console.commands.AbstractPropertiesCmd$ 1.run(AbstractPropertiesCmd.java:86)
  at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
  at java.awt.EventQueue.dispatchEvent(EventQueue.java:461)
  at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
  at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
  at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
  at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
  at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)

  Hello

  When I face this kind of problem I leave owb and restart it. This usually solves the problem.

  Kind regards
  Carsten.

• The process C:\Windows\system32\wbem\wmiprvse.exe (computer) has started closing the computer

  Hello

  Machine gets the stop logging after keeping the machine idle for more than 1 hour. Check the system log

  Event Id 1074 Source USER32

  Description:
  reason: C:\Windows\system32\wbem\wmiprvse.exe (computer) process launched the computer for the user NT AUTHORITY\SYSTEM account closed following no title for this reason could be found
  Reason code: 0 x 80070015
  Type of closure: closure

  Original title: Machine get stop while that kept idle for more than 1 hour

  Hello George,.

  Thanks for posting your query in Microsoft Community.

  1. What is the brand and model of the computer?
  2. You did changes to the computer before the show?

  You can try the following methods and check if they help:

  Method 1: You can run the verification and troubleshooting of power if it can help solve the problem:

  The resolution of the problems of power check things as settings timeout of your computer, which determines how long the computer waits before turning off the display or enter the mode 'sleep'.

  Open the troubleshooter of power

  http://Windows.Microsoft.com/en-us/Windows7/open-the-power-Troubleshooter

  Method 2: Try to reset and restore all default power Plans returns with their default settings, follow the steps below:

  1. Click Start, type Control Panel in the search box and open it.
  2. Open the Control Panel (Display icon), click/click the Power Options icon and proceed to step 3 below.
  3. Click/click on the link change plan settings to the right of the power plan that you want to restore the default settings.
  4. Click/click on the link to restore the defaults for this plan and go to
     step 5 below.
  5. Click/click on Yes to confirm.
  6. Close the Edit Plan settings window and check.

  You can check out the article below and check if it helps:
   
  On a computer running Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2 to an improper shutdown reason code written to SALT on initiated by the user
  Shutdown

  http://support.Microsoft.com/kb/2001061/en-us
   

  For reference:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/when-i-shut-down-my-computer-it-logs-event-ID-1074/6e16b22d-5D7D-4B4C-AA32-9f4df4e3f0c7

  Hope this solves the problem. If the problem persists, you can write back to us and we will be happy to help you further.

   

• Limits of Panel/window closed vi

  I need to get a vi limits Panel and or window but I am unable to do without opening the vi. Right now Im opening the VI for a moment before closing again to insert it in a secondary (resizing of secondary school under the boundaries of the Panel of VI). My question is, is there a way around this problem? I have read the documentation and OR suggested that I use the property "state / hidden" to get the Panel marking - but I get an error when you try to do, because the VI must be opened to set this property to where another situation of opening and closing.

  If you use the Open method, you can directly set its hidden state.

  With the state property you can change the standard State (after resizing).

  Tone

• Hey my layer Panel does not work

  When I cut, paint, double... he dosen appear in the l Panel ayer help me please <

  3

  When you select an area on the background layer, you should see the ants.

  When you use Ctrl + X cut this area of the background should move to the background color of the color swatch and what has been cut should be on the Clipboard.

  When you use Ctrl + V paste the Clipboard it is necessary to paste as a new layer.

  The layer becomes the target of Photoshop layer, and you should be able to place this layer using the move tool.

  If Photoshop works this way not try resetting your Photoshop preferences.

  

• the layer panel shortcuts

  Two things I do very often in the Panel layer is one of the two layers add to a group and duplicate a layer.
  I have not found all the shortcuts of teas using the keys.

  Y at - it all?

  / Mattias

  Yes, it is an action as well.

  Record the corresponding commands in the menu of the layers (duplicate and accumulate in the new layer) palette.

• When I open Photoshop CS6, the image does not appear in Photoshop. The image IS open, i.e. the name of the file is displayed on a tab and the image layers appear in the layer panel. What is going on?

  Photoshop and Bridge is open as usual. But when I open an image, the image does not show in the area of the image. The image filename is show in a tab and the spectacle of layers in the Panel layer. What is happening and how to fix this.

  I solved the problem. It was somehow connected to my using Microsoft

  photos of theme. I put Windows to use the basic theme and the problem

  went. Thanks for the suggestions.

  HA!

• Filter layer panel

  I think the layers panel filter is a fantastic addition to Photoshop, but I think it really when you use search by feature name.

  I wanted to find a layer called the 'logo' that I have done easily by selecting name filter and the search for "logo". This is the layer I couldn't find isolated in the layers panel.

  Now what I wanted to do was to move this layer to the top of the stack, so I chose this layer and disabled the filter. I was so disappointed to find that the layer was still selected in the layers panel. So now what should I do? I don't remember where it is and the name search is useless to help me accomplish what I wanted.

  I propose that when I sleep is selected in filtered layers panel that it remains selected and visible in the Panel when the filter is disabled.

  You use photoshop cc?

  Is your layer in a group?

  It seems to work right in photoshop cs6 on a windows system 7, but not in photoshop cc.

• Layer panel display in PSD &amp; I import the file into Flash CC?

  Hi guys,.

  You guys at Adobe, you always did an excellent job. I love all of your software. Your reputation is awesome.

  However, I want to encourage you to add layer view panel in Flash CC in CS6.
  

  I just installed Dlash CC and I found out that I can't use it for what I do.

  The new features and the black interface are all great, I love them. The only thing that bothers me are the features that were dropped from earlier versions. It's really something that forces me to use Flash CS6.

  
  I am a developer of flash games and I do things all around active graphic preparation in hiking & animations in Flash.

  This is my workflow CS6:

  In Photoshop
  

  1. I prepare all the graphics in Photoshop. I also have the folder structure already in Photoshop so when I import into flash, everything is as I need and I did not bother with nesting of videos or distribution of symbols to the layers.

  Then in Flash

  1. I press the import library in Flash, locate the PSD and then I'll put stuff in the display of the control panel in the window layer import
  2. I select the layers I want to import (this way I don't have to edit the PSD in Photoshop whenever I import, moreover, sometimes I forgot to turn off the visibility of a layer and I do when importing)
  3. I put quality individually for certain assets (time-saving, but I'll check again, in any case in the properties of the active)
  4. I set the record (in the Center) of the symbol individually as I need for each symbol (huuuuuuge time saver, having is not the ability to do so is a killer CC for me)
  5. I put the name of the instances for the selected clips (saves time)
  6. I select the files I want to import as a symbol (huge time saver)
  7. ... now I press the import.
  8. then I'll animate everything (using the Motion Editor, who is also absent BTW but that's another topic)
     

  And this is a HUGE timesaver. Otherwise, I have to do it one by one, after importation.

  Almost none of this, I am able to do in Flash CC.

  Individual establishment registration is particularly important. That I regard as the biggest problem. Objects that are imported are different. And having to set the record eventually ruin the position of each symbol completely.

  This dream would be to have the features that were available in CS6:

  • Select the layers I want to import
  • addition of Instance names for selected layers
  • possibility to adjust the quality individually
  • option to make a unique symbol or import bitmap
  • option to make a folder symbol
    
  • option fors defining the (record) Center of the symbol

  And also, allows to make it even more impressive, think similarly to add more features :

  • option to import a symbol with the type - button / video / graphic

  
  

  Well, I just hope that all the features have been abandoned because you built CC Flash form scratch and just not had enough time to complete all the features.

  So, is it possible that you will develop in Flash CC?

  Thank you for reading my message.

  Kind regards

  Edit #1: Here I am adding screenshots with my thoughts.

  

  

  Adam

  Hi all

  The new version of animate CC (15.2) that brings to import advanced options for AI and PSD import dialogue.

  See here for more information: https://helpx.adobe.com/animate/using/whats-new.html#adv_PSD

  Update your copy of animate CC using the creative application of cloud and try it!

  Thank you all for sending your feature requests.

• Y at - it a keyboard shortcut to reduce all the effects in the layer panel?

  It would be very convenient. I have tried searching without success. Of course, the reverse is also true. It would be nice to have a shortcut key that extends to all effects.

  In photoshop cs6, you can Alt (option) click the little arrows in the layers Panel next to the fx to expand/collaspse all layer effects.

  I think it is new in photoshop cs6.

  http://helpx.Adobe.com/content/help/en/Photoshop/using/JDI-productivity-enhancements-CS6.h tml