Similar Questions

• Can I get lines painted in Illustrator using pathfinder?

  Hello world

  It is a question of a total novice with Illustrator but I was googling like crazy without result, so any help would be appreciated!

  I'm experimenting with creating seamless models, using forms. I know how to crop shapes by using the pathfinder tool.

  I can do this by placing the different shapes on a square. I then glue a square of the same size in front of all objects, select all then and use the crop to scout tool.

  However if I try to use it with painted lines (or lines created with the online tool or the pen tool) it will not work.

  Is there a way to do it, or am I missing something very obvious? Thank you to everyone who takes the time to answer

  You must not cut the objects you put into a shade of reason. Simply put an invisible rectangle in the back. But in case you want to cut, first expand appearance.

• security problems of online game with windows 7

  I haw problem with online games for a long time since I have windows 7 64 bit

  Perfect World internatyional recognize only 1 GB RAM 6 GB. Tried compability mode tried to run it as administrator nothing worked :(

  What could be the reason for this?

  Hello Rudions,

  Thank you for visiting the Microsoft answers community.

  There are a few things that could cause the problem you are experiencing.

  Compatibility, network, video are the areas that must be addressed. On the website of Perfect World Entertainment, I was able to locate troubleshooting for their games for each of these areas, as well as the simple troubleshooting steps for their games successfully under Windows 7. Please visit their website for more information on all these areas. Then go to the Technical Support on the left navigation pane.

  Hope this helps

  Chris.H
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Dear Sir I have toshiba l300 notebook now, I had some problems at the start that a time window is error and posted massage window stopped work go on line chek problem and restart when I restart then run ok that's my question ok

  Dear Sir I have toshiba l300 notebook now, I had some problems at the start that a time window is error and posted massage window stopped work go on line chek problem and restart when I restart then run ok that's my question ok

  Hello

  display the appropriate error message.

  the error codes?

  Try the clean boot procedure to find the application or program causing the problem.

  http://support.Microsoft.com/kb/929135

  all the best!

  Addison

• Beginner: Script to bend 'lines' in flash animation?

  Is there a script simple white lines drawn in animation flash to bend? I want that they animate moving in waves through an AS3.

  Is this possible and if so, how it would be written?

  Of course, it's possible... you would probably start using the method of the Graphics class curveTo.

  Here's a super simple script that will show you the basics - open a new document and paste this into the script of frame:

  var yVal:int = 0;
  addEventListener (Event.ENTER_FRAME, update);
  function update (e: Event) {}
  Graphics.Clear;
  graphics.lineStyle (1, 0 x 000000);
  graphics.moveTo (50,100);
  graphics.curveTo(100,yVal,150,100);
  yVal += 1;
  }

  You will see that a simple curved line animation...

  HTH

  See my post "Some Eye Candy" in the site design section and you will see much more, it is possible...

• Create animation online aboard animate (was: convince Linie)

  Hallo,

  ICH habe eine question wie kann ich in edge animate eine Linie/path convince?

  ICH will be mehret Punkte miteinander verbinden, um ein Netzwerk zu create.

  Freue mich über eure Hilfe! :-)

  Here is an example with the canvas. The code is in compositionReady.

  path with canvas.zip - Box

• Paint problem custom listfield - nullfield

  I created a listfield custom by extending the field manaagers, I use the nullfield for the effect of the update, but it does not work properly. I use two differnet layout for line manager who has no images and the other that contains images. The focus problem occurs only for lines that have pictures. I enclose the code below.

  The images appear correctly once I have the focus and remove on the line.

   //CONSTRUCTOR FOR BITMAPFIELD
      public CustomRow(String _headline, String _metadata, BitmapField bmF)
      {
          bitmapField = new BitmapField();
          bitmapField = bmF;
          _headText = new RichTextField(_headline,RichTextField.NON_FOCUSABLE);
          _metaData = new RichTextField(_metadata,RichTextField.NON_FOCUSABLE);
  
          _headText.setPadding(10, 10, 5, 10);
          _metaData.setPadding(0, 10, 10, 10);
  
          _focus = new NullField(NullField.FOCUSABLE);
          _focus.setFocusListener(this);
  
          bmpRowTextMang = new VerticalFieldManager(){
              public void sublayout(int width, int height)
              {
                  super.sublayout(Width * 3/4, height);
                  setExtent(Width * 3/4, height);
              }
          };
  
          bmpRowBmpMan = new VerticalFieldManager(){
              public void sublayout(int width, int height)
              {
                  super.sublayout(Width/4, height);
                  setExtent(Width/4, height);
              }
          };
  
          bmpRowTextMang.add(_headText);
          bmpRowTextMang.add(_metaData);
          bitmapField.setPadding(10, 10, 0, 5);
          bmpRowBmpMan.add(bitmapField);
          bmpRowMan =  new VerticalFieldManager(){
  
              public void sublayout(int width, int height)
              {
                  setPositionChild(getField(0), 0, 0);
                  layoutChild(getField(0), width, height);
  
                      setPositionChild(getField(1), 0, 0);
                  layoutChild(getField(1), width, height);
  
                  setPositionChild(getField(2),getField(1).getWidth() , 0);
                  layoutChild(getField(2), width, height);
  
                  int height1 = _headText.getHeight() + _metaData.getHeight();
  
                  if(height1<80)
                  {
                      height1 = 80;
                  }
                  setExtent(width, height1);
              }
  
              protected void paint(Graphics graphics)
              {
                  setHeightRow = this.getHeight();
                  graphics.drawLine(10, setHeightRow-1, Display.getWidth()-10, setHeightRow-1);
                  super.paint(graphics);
              }
  
              public int getPreferredHeight()
              {
                  return this.getHeight();
              }
          };
  
          bmpRowMan.add(_focus);
          bmpRowMan.add(bmpRowTextMang);
          bmpRowMan.add(bmpRowBmpMan);
          this.add(bmpRowMan);
      }
      public void focusChanged(Field field, int eventType) {
          // TODO Auto-generated method stub
          this.getManager().invalidate();
      }
      protected void paintBackground(Graphics g) {
            int prevBg = g.getBackgroundColor();
            if (_focus.isFocus()) {
              g.setBackgroundColor(Color.LIGHTBLUE);
            } else {
              g.setBackgroundColor(Color.WHITE);
            }
            g.clear();
            g.setBackgroundColor(prevBg);
          }
  
  }
  

  DEVICE BLACKBERRY BOLD 9780

  

  One thing to try is to substitute drawFocus do nothing:

  protected void drawFocus(Graphics g, boolean on) {
  }
  

  But the main problem must be somewhere in your sublayout substitutions. First of all, I am always wary with the help of a manager not abstract, never by calling its sublayout (such as super.sublayout). If you want to do this, substitute rather Manager. If your

  bmpRowMan =  new VerticalFieldManager(){
  

  should become

  bmpRowMan =  new Manager(){
  

  Another problem (this is not obvious and is repeated a lot of different people here) is using setExtent after the super.sublayout of a built-in Manager. Simply put - don't! If you change the width and height parameters before you go super.sublayout and want the Manager to have these exact width and height, set it with USE_ALL_WIDTH and USE_ALL_HEIGHT and filing the setExtent altogether! You pouvez use setExtent after super.sublayout, but you really need to know why you do this. An example is the code for this article in the knowledge base, but it feels more like a hack, you don't need:

  Implementation of a standard style scroll bar

  Good luck!

• Problem: Animation publishing incorrectly, but working in Cp overview.

  Hello

  I've created an animation in Flash CS5 with a code in it (see below for the code). What does the code is that it allows the user play/pause the film by pressing the space bar. It allows this keyboard shortcut be used on all the slides except some of them (in this case: slides, 9, 13 and 15). I just need to drop this animation on the first slide in my project of Cp, and the service works in the rest of the project. When I hit F4 to preview, it works fine, but when I publish it, he has problems: it won't work, for beginners, but also, when I go to a slide, press the SPACEBAR, and then return to the previous slide, the play/pause button down on the playback bar shows the icon of 'play' (which means that the video should be paused) , but the video keeps playing. The button play/pause in the playback bar and the keyboard shortcut do nothing. Remember that it works perfectly when I "F4" it, just not when I publish and open the SWF file. Usually when the trick works in Cp but not when published, its something in the settings of publication that is the problem, but I don't find anything in there that would help. In addition, F4ing the project within the Cp must factor into the publication settings. Just to be clear, all that I need help for deploys the published file works just like the F4 preview. The code is below and thanks to all those who can help.

  Shortcut key: Play/Pause (space)

  stage.addEventListener (KeyboardEvent.KEY_DOWN, keypressPause);

  function keypressPause(event:KeyboardEvent):void

  {

  Switch (Event.keycode)

  {

  case Keyboard.SPACE:

  var myRoot:MovieClip = MovieClip (root);

  var mainmov:MovieClip = MovieClip (myRoot.parent.root);

  If (mainmov.cpInfoCurrentSlide! = 9 & &)

  mainmov.cpInfoCurrentSlide! = 13 & &

  mainmov.cpInfoCurrentSlide! = 15)

  {

  If (mainmov.rdcmndPause == 1)

  {mainmov.rdcmndResume = 1 ;}

  on the other

  {mainmov.rdcmndPause = 1 ;}

  break;

  }

  }

  }

  It is the way in which the code is the main time line obtaining of Captivate (mainmov).  When you F4 film, it is loaded differently when you preview web F12... the line of main time is reclassified differently.  Here is a way to search the main time line and the rest of the code:

  import flash.display.DisplayObject;
  import flash.display.DisplayObjectContainer;
  import flash.utils.describeType;
  import flash.display.MovieClip;
  
  var mainmov:MovieClip = findMainMovie();
  
  // Keyboard Shortcut: Play/Pause (Space)
  stage.addEventListener(KeyboardEvent.KEY_DOWN, keypressPause);
  function keypressPause(event:KeyboardEvent):void
  {
      switch(event.keyCode)
      {
                      case Keyboard.SPACE :
  
                      if (mainmov.cpInfoCurrentSlide != 9 &&
                                mainmov.cpInfoCurrentSlide != 13 &&
                                mainmov.cpInfoCurrentSlide != 15){
  
                                          if (mainmov.rdcmndPause == 1){
                                                    mainmov.rdcmndPause = 0;
                                                    mainmov.rdcmndResume = 1;
                                          }else{
                                                    mainmov.rdcmndPause = 1;
                                                    mainmov.rdcmndResume = 0;
                                          }
  
                      }
                      break;
  
      }
  
  }
  
  //Returns the Captivate MainTimeLine
  function findMainMovie():MovieClip
  {
            var cpMovie:MovieClip;
  
            //cpMovie = parent.parent.parent;
            cpMovie = findParentByType(this.parent, "CaptivateMainTimeline") as MovieClip;
  
            return cpMovie;
  }
  
  //Iteratively finds a parent object by type
  function findParentByType(source:DisplayObject, parentType:String):DisplayObjectContainer {
            var currentTarget:DisplayObjectContainer = source.parent;
            while (currentTarget != null) {
                      if (describeType(currentTarget)[email protected](parentType) >= 0) return currentTarget;
                      currentTarget = currentTarget.parent;
            }
            return null; // We're at the root
  }
  

  The code to search for the main time line has been gleaned CpGears written by Whyves

  I encourage you to think about what in fact in a static Captivate widget using the framework of the CpGears or the WidgetFactory by Tristan Wardframe.  Or the other framework will make your life a lot easier.

  I usually put two variables in tandem: rdcmndPause and rdcmndResume for that all variables are kept synchronized.

  When I dropped the animation in the Cp project, I had to show for the "rest of project" to make it run on all slides.

  Make account and let us know how it goes.

  Jim Leichliter

• Problems with online information product Toshiba Satellite R830

  Hello! I just bought a Toshiba Satellite R830-146 with the following general specifications:

  OS: Windows 7 Home Premium
  CPU: Intel i5 - 24010M
  RAM: 4 GB DDR II
  HARD DRIVE 640 GB

  I had install/configure these days.

  In addition to the original, Aministrator account, I first worked with what turn on the machine and the installation/configuration of starting the process, I had to create another account to user with administrator privileges. The reason? Because the settings of Internet Explorer 9 in the original Admin account were somehow gone corrupt: some web pages that I absolutely have to work with because of professional reasons cannot be properly charged more, and these web pages are only compatible with Internet Explorer, not any other browser, Mozilla or anything like that. After several hoyrs work trying to solve this issue, I couldn't find a way to solve it.

  So I created a second administrator. User account (with the intention to delete the original Admin account if it worked OK); and in the admin again. account 9 IE works fine in any web page but I this is my problem with the Toshiba application online product Info begins.

  Namely: Toshiba OPI app doesn't work at all in the admin again. user account, even if it worked perfectly in the original account of amin - and it still doesn't work (I haven't dared delete the admin account of origin). When it is running in the new account admin, Toshiba OPI shows only an error message. I tried with UN-install the utility, then put it back in the admin again. account - no result, problem still there and Toshiba OPI still works fine in the oldest account where the IE 9 settings are corrupt, but false in the new, where everything works fine.

  So, why don't I just uninstall Toshiba OPI, delete the older admin account and forget all about?, you ask. Well, because among all the specific software Toshiba provided with my machine, this seems to be the one and only piece of software that maintains a current alert on, locates, downloads and installs the necessary drivers, BIOS updates and other. Software specific to the computer of the machine it does basically what Windows Update performs the operating sistem. Like many other users, I usually end up uninstalling the pre-installed software, specific LABELTEX, most of the machines that I buy, because it most of it isn't useful. But I still like to preserve the piece of software specific LABELTEX update which is updated regular with LABELTEX criticism or specific patches to the computer/model instead of having to regularly visit Toshiba support & updates page to see if it is something urgent. And this piece of software in question seems to be Toshiba OPI utility, in this case.

  So I wonder if anyone has a diagnosis of why this does not work in all the admin. accounts (and no, the problem isn't that I do run the program with two admin accounts connected and active I already checked that), and how could I solve apart from uninstalling the Toshiba OPI and oblivion, that would be very easy , but I would not do.

  Thank you very much in advance for your help.

  In the last years I ve changed 3 portable Toshiba and the first thing I did was to remove the OPI and several other specific applications of Toshiba. Why? All of them start with Windows, slow start-up of the laptop, run in the background for nothing.

  My experience Toshiba doesn't offer new things every day, so in general you can use OPI every two months to check whether or not something is offered again. You can do this when you start your laptop with the original admin account.

  You know, that these questions are not easy to explain. Toshiba has tested pre-installed software and functionality with the original account. Who knows what is corrupt with your admin account and what have you done in the past.

  In my opinion, if you want to keep your configuration, stop OPI to run with your extra account and be happy. Each connection of two months using original admin account and check for updates.

• problem with online status

  online status is non-stop loading it is as I have no internet, but I can't browse the internet without any problem and if I close and re - open Skype it always does the same thing

  Thanks for the help in advance: happy:

  everything that I did is change the folder itself to Skype to another place and it worked

• problems of online game.

  whenever I try to play a game online (any site... pogo, yahoo, etc.) when I go to the game loading page the game does not load and it says that I need internet explore and windows to play the game.  but I am running windows and internet Explorer... then why it keep telling me I'm not?

  Nannerpuss

  The problem with internet explore is caused by a worm or a virus.  How to fix is that you need to uninstall to make sure it is completely removed from your system and then internet explore then reinstall with what you had on it and turn on internet security.

• Microsoft Paint problem with preview and images printed in being extended

  I used Microsoft paint for years and all of a sudden, I'm having a problem where when I previews the image in paint is be lying and it is also elongated impression. However, the image in the window of the paint itself is fine, and if I open the image in another application IE. Photoshop - image presents a preview and prints correctly. What has changed and how I can fix?

  As I said previously... I guess just but you mentioned that the distortion
  was not only visible when in preview but also appeared on the print
  document. If it occurred during the display, I suspect the video driver.

  If the printer has not been updated for many years... of the manufacturer
  support site might have an updated driver, you could try. And it is certainly
  possible that the printer has nothing to do with this issue...

  If everything worked perfectly until recently... it may be worth trying
  do a system restore in Mode without failure for some time before painting began to have
  problems.

  If you receive auto-mises to update WIndows Update... it is possible that a
  a driver updated of some type has been installed that you aren't aware of.

  Given that the painting seems to be the only application affected...uninstalling/reinstalling
  may be worth a try... but you would need a Win XP install disk.

• Paint problem ListField

  Hi all

  I am facing a problem of painting list, I now architecture - when I press on any screen I pop the currentScreen & then push the screen.

  Problem - (OS - 4.6, device - BOLD) area

  a screen with a list of thousand items & when I select an element of the next as a result of this list screen is pushed (first screen jerking) with valid data.

  When I click the back button, I'm popping second & pushing first. But in this case my list is not painted, only when I scroll it gets painted.

  No idea why its not working...? Same object screen's push in the battery (which jumped) still the issue of paint...

  This strategy is paying off for other screens.

  Thanks & best regards,

  Abhay

  Expert thanks for your help.

  The problem was with the way I was adding list ot the optimization of resources.

  The correct order has solved my problem.

  Thank you again...

  Kind regards

  Abhay

• Custom button on a touch paint problem

  I have a custom button that I use to the pop-up window of a PopupScreen. The custom button has his own painting methods (he also replaces the applyTheme() method), and for the most part, everything works as expected.

  The only problem I have is when the button is pressed. If I press and hold the button, the button is redrawn with what seems to be the default paint scheme (it seems that it is painted without label as well). As soon as I release the button and the context menu is displayed, the button is redrawn with my custom methods and look as I hope.

  Suggestions appreciated, thanks!

  If navigationClick is treated by default? This is the root of the problem: I think that integrated ButtonField.navigationClick defines the Visual status of the "active" field Replace to do what you want it to do and do not call super.navigationClick (well, call of may when the status parameter is not 0 - in the case of Alt-click and make shift-click - and you don't want to deal with yourself).

• The hyphen in the name of XML line causing problems

  I have an xml file that I am turning into a qury object so I can have the query interact with my SQL database

  The XML file has 15 lines and got 13 of them successfully in a query.

  The problem is that 2 other fields have hyphens and dashes - in line names. As (WORK_E-MAIL)... See the - between E-mail

  So, when I go to the value in the query with this code

  < cfset temp = QuerySetCell (orderquery, "WORK_E_MAIL",

  #mydoc.rowset.ROW [i]. WORK_E-MAIL. XmlText #, #i #) >

  I get this error message

  Error occurred while processing request

  Invalid construction: arguments or name is missing.

  Is it possible to alias the line name with the hyphen, maybe like this {WORK_E} MAIL or this [E-MAIL] WORK_E

  I need ge cut these 2 lines named in my application.

  Any ideas?

  Have you tried to use the syntax assosicative?

  MyDoc.rowset.Row [i] ["WORK_E-MAIL"]. XMLText