Leave 1 USB key type

Similar Questions

• password does not stay when I transferred the file to a USB key

  Hello

  In my office, we have 2 different types of adobe, the licensed version for what we pay and some people have the free version, in both cases where we password protect a document and transfer it with a USB port on a different PC, password protection disappears. We have windows 8.1 and it becomes a real security problem. Can someone tell me how to fix this bug?

  I suspect that it is a possibility.

  The user opens the file.

  The user accesses the properties and sets a password.

  User is dragging the file on the USB key in Windows Explorer.

  The user closes the file.

  This is easily done and will of course leave a file unprotected on the USB.

  You can check this quietly looking at the modified date on the file on the USB key. If it has been modified until the user says that the password has been set, you can show that this is what happened.

• Tecra A4 - USB keys do not appear in 'my computer '.

  I recently had to restore my TECRA A4 system after a disaster, since then, usb keys do not appear in 'my computer' and aren't available to use? However, they are listed in the device under usb devices Manager and hard drives?

  I updated the Bios and looked for the updated USB drivers, but nothing found?

  Hello

  Maybe stupid thing, but try it please follow: disconnect your laptop computer, adapter sector and battery and leave about 60 minutes. After only 60 minutes connect AC adapter / CC, start your laptop and try to use the USB.

  Please let me know what happens after that.

  By the way: check this http://support.microsoft.com/default.aspx?scid=kb;en-us;817900 document

• Pavilion 500 t - not accessible when starting from CD USB key

  I am booting from a CD on my Pavilion 500 t to restore an image from a USB key.  I can boot from the CD fine, but after loading, my recovery (Ghost) software my USB key is not accessible.  Any ideas?

  Hi Steve,.

  Please report the number of HP for your PC product.

  How to find the model number of HP and the HP product number or leave model number HP automatically find your PC and HP network attached printers.

  You say that the ghost can not find the USB? If Yes, then try a USB 2 port.

• If you like a challenge? Weird USB problem, he does not see my own USB key, but he sees another USB, but on other computers - it - see my USB key! P.S., Already tried a lot of solutions (unemployed). I'm an ITer.

  Hey there.

  I have the weirdest problem ever. I have a computer that does not see my USB, other computers but do not see my USB.
  Now, we tried another usb key (with usbstick I mean a ^_^ usb flash drive) and he DOES not see that stick! My own stick is a SANDISK Cruzer without U3, just ordinary storage 8gigs. None of the firmware see-as-CD. And the other was a different brand, but I don't remember.

  I also tried to plug a very specific device (A P2000 keystrokes recorder, it is a device that recorded incidents, I work for the firedepartment/police/ambulance and it records events), but he doesn't know that aswell of device, as if it has never been plugged in (we have installed the correct drivers for it).

  Now, I did some standard troubleshooting (check drivers, drivers of reupdating) and I removed all the usb drivers, restarted, drivers were back as usual, is not yet connect mine but it connects the other stick. My usb key works perfectly well with all computers but this one (same for the recorder to P2000), reupdated and installed, checked and stuff. Ports SHOULD work.

  I would appreciate help! Thank you!

  P. S.
  More info; It does not take into account the USB and connects anything, even the little blue light inside the usb key does not illuminate. Its as if she was never plugged on. The other has worked flawlessly on the same port, however. And my USB works on other computers. (Ditto for the P2000, but is not on the P2000.)

  P.S.S.
  I guess my computer-type is too relevant?

  Its a HP Compaq dc7100 Small Form Factor.
  http://h20000.www2.HP.com/bizsupport/TechSupport/DocumentIndex.jsp?lang=NL&CC=NL&ContentType=SupportManual&docIndexId=64255&prodTypeId=12454&prodSeriesId=410112&lang=NL&CC=NL
  All the statistics are there.

  Hello

  We concluded that the PC was actually broken. (He suddenly begins to restart and stuff randomly gave away.)

  .. Third PC in a line that falls down and breaks down...

• Installation of Windows operating system by USB key.

  I want to know what type of format of the operating system (such as image bootable cd or other) we save in USB to computer can boot boot by USB key because I don't have a CD-ROM or dvd drive.

  http://www.Google.com/#hl=en&source=HP&q=how+to+install+XP+from+USB+drive&AQ=2&AQI=G10&OQ=how+to+install+XP+from+&FP=2755c6b3e9b2e9 MS - MVP - Elephant Boy computers - don't panic!

• When I try to copy the files from Windows Mail on Vista on a USB key I get the message "you are about to copy this file without its properties

  I move the file from my old PC which took place with Vista on a new computer running with Win 10 where I have Windows Live Mail is installed.  When I try to copy the files from Windows Mail on Vista on a USB key I get the message "you are about to copy this file without its properties".  After studying this issue on the forums, a proposed solution was to reformat the drive in NTFS format, I did.  This does not solve the problem.  Any suggestions?  Would it be OK in this case to ignore the message and copy the file without its properties?

  Well data files/user of vista should work. Yes a NTFS format is good, go to run, or cmd, type:

  diskmgmt.msc in msc, R.click on the material, delete the partition, create one, format. Use the default settings,

  Once thru, L.click the disk, go to actions, all, select 'enable '.

  In addition, live windows for vista is microsoft discontinud

• Staples relay USB key does not?

  Recently, I bought a relay 8 GB USB Flash drive, and it works great under XP. But in Vista, it will run for 2 seconds and then stops. I tried everything I can think of. (Tho can't really remind them now. =) Staples support has not been able to help me, (big surprise), so I guess it has something to do with Vista. I just installed SP2 as well and it still doesn't work. When I bought it, I have the formatted in FAT32, with the Vista laptop.

  It does not give any error message, it just stopped responding. Almost as if I would take it outside, but it's not. Whenever I try to open it, it closes. With whatever it is.

  Help, please. :( I have things that I need it.

  Hi Tosai,

  Welcome to Microsoft Vista answers Forum!

  Vista does not recognize devices that are the reason for the USB key to the FAT 32 format, that is perhaps not getting recognized, you may need to convert the machine to NTFS, follow these steps to convert the machine to NTFS:

  Click Start > type in the Device Manager in the research starting > expand disk drives to find the USB device > click with the right button on the player > select Properties > then go to the policies tab > select the "Optimize for performance" option and click OK, and then do the format, then select NTFS.

  Additional information: convert a hard disk or partition to NTFS format:  http://windowshelp.microsoft.com/Windows/en-US/Help/414a3808-283a-4e4d-b5ff-1a6d06f597d31033.mspx

  Hope this information is useful.
  Let me know if it worked.
  All the best!

  Thank you, and in what concerns:
  Swathi B - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Drive (USB key) cleaned using the command line. Not able to use the USB.

  I had downloaded Chrome OS vanilla http://chromeos.hexxeh.net/ and writes to a 8 GB USB key. After that I checked, I tried to remove it. I plugged my USB and it asked me to format it. There was only one option of 1 GB. After formatting, I just had 1 GB on my USB key. Then, I tried http://erlern.wordpress.com/2010/04/02/repair-unallocated-space-from-usb-flash-drive/ and followed the procedure in the comments.

  Step 1: Start-> CommandPrompt->
  Step 2: Type diskpart-> Enter
  Step 3: Type list disk-> Enter
  Note: (find the allocated number of the disk)
  Step 4: Type select disk X-> Enter
  Note: (If X is the number of your drive)
  Step 5: Type clean-> Enter

  After that when I plug my camera he asks me to format the drive. It shows unknown capacity. After clicking on start it says Windows could not complete the format. Then when I close it, it says Windows can not format H. check that the drive and the drive are connected correctly, make sure that the disc is not dead, and then try again. For more information, search the help of read-only files and how to change them. Now I can't use it and it has no memory. Please help me.

  I got it. I HAD to PLUG IN ANOTHER PORT USB (IT DOESN'T WORK ON OTHER TWO) AND USE the TOOL in http://erlern.wordpress.com/2010/04/02/repair-unallocated-space-from-usb-flash-drive/ (in the tool, that the device will not be detected in the tool in the other 2 ports) Thank YOU

• I get startup repair screen when I try to boot my laptop from dell inspirion windows 7, I run the scan and detects any errors. When I ran repair usb key received the error 0x400110020000100A

  I get startup repair screen when I try to boot my laptop Dell Inspiron windows 7, I run the scan and detects any errors. So, I tried to use a USB repair for a laptop Dell Latitude Windows 7 pro and I still can't the computer to start. Tried to restore to the factory settings, can not. I have no image, backups, all missing, restore points?

  After that I tried to launch the USB repair I got 0x400110020000100A error code and I received error (0x8007027E) indicating the device will not start without a reboot.

  Anyone know how to fix this?

  Any advice would be greatly appreciated. I'm not computer illiterate, but am not pro either. Just use them not program them or even understand all languages!

  ____________________________________________________________________________________________________________

  Dell Inspiron laptop about 4-5 years.

  Running windows 7 Home Edition.

  Does not start little matter what I tried.

  If I remember correctly, I looked in MS-DOS mode and noticed that it said something like "x: win...» "that seemed strange to me because I thought that it should say"c: victory... "but as I said I am not a computer wiz so if anyone can help me, I would appreciate it.

  I'm about to rip the hair off my head with my laptop. My latitude was blue planned, surprisingly I fixed it (don't ask how, you couldn't tell). Then my dell inspiron would not start right after my dell latitude fell out of my truck and landed on the sidewalk, wanted to kill the person, the screen is broken. I can use it but it is very difficult, see a mosquito net and not perfectly clear, works well. lol someone knows somewhere or that would install a new screen for a reasonable price? I live in the Boston area.

  Back to the laptop won't start not, when I ran repair USB key received the error 0x400110020000100A

  Hello

  Thank you for the update on the issue. I appreciate your time and effort in resolving this issue.

  You can try the following methods and check if it helps.

  Method 1:

  You can use the Bootrec.exe tool in the Windows recovery environment (Windows RE) to troubleshoot and repair the following items in Windows Vista or Windows 7:

  • A master boot record (MBR)
  • A boot sector
  • A Boot Configuration data (BCD) store

  Note: When you are troubleshooting startup issues by using the Windows RE, you should first try the Startup Repair option in the System Recovery Options dialog box. If the Startup Repair option does not resolve the problem, or if you must troubleshoot more steps manually, use the Bootrec.exe

  Use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows

  http://support.Microsoft.com/kb/927392

  If the problem persists, proceed to method 2.

  Method 2:

  Please follow these steps:

  1. Tool command prompt open in the mode of the Windows recovery environment .
  2. You will see X:\Sources
  3. Type chkdsk c:\ at the flashing prompt to launch the utility Chkdsk. replace c:\ with the letter of the drive that you want to run the Chkdsk utility. If the hard drive is d:\, then type that instead.
  4. After the "chkdsk c:\. "insert \f command to fix errors on the disk volume or the \r to recover bad sectors and then press ENTER.
  5. Restart the computer once the chkdsk command has completed.

  Note: Running chkdsk on the drive if bad sectors are found on the hard drive, it attempts to repair this sector, if all available on which data may be lost.

  For more information: Please refer to the section of the additional If you can not boot into Windows at all stages in the following link.

  Resolve stop (blue screen) error in Windows 7

  http://Windows.Microsoft.com/en-in/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• Faulty USB key

  I have a USB, I was working on something, and then suddenly the USB not working anymore, I wonder if this has something to do with the file I was working on or is the USB aisle and I can't use it. I have all the backups of my USB and I have important work on that in fact I remember deal files to the computer, but I deleted them that I also tried to put the USB key to a different computer, but still nothing happens.

  Which computers I used:

  Lenovo ThinkPad X 220 and

  Acer Travelmate P645-MG

  I need work on the memories soon Please update.

  This is a generic USB

  It is likely that the USB (I assume that's what you're referring to the) failed.

  You can try a few things - assuming that it displays in the list of the computer:

  Use Chkdsk: In the Accessories folder, right click on the command line item.

  When the black window, type chkdsk, space, (drive letter see you for this in the list of the computer), space/r.  For example, it might look like this: chkdsk f:/r, it is possible that the 'disc' is corrupt and chkdsk can fix.

  If this does not help, always assuming that it displays in the computer list, right-click on it and choose reformat.  This will make you lose data, but it might save the device.

  Keep in mind USB thumb drives are cheap.  Marks for not even.  USB 3.0 drives 32 GB go for about $20.

  Know as well as USB FLASH drives have a limited life span.  Technically, every time you write something, you ' wear it. "  They are good for move files from time to time, but not a good thing for backups or constant daily use.

• BitLocker without TPM refuses to recognize the USB key at startup.

  I have a Windows 7 PC, I'd need to BitLocker, but it fails to recognize the USB key at startup. I've resorted to skip verification and now enter the recovery key every time you start (this PC has a lot of data on what should be confidential), but it's not ideal.

  What is curious to me, is that the computer will start perfectly fine from a USB key, or produce a message of type "non system disk or disk error", if the USB key in question is not bootable. So it is not a matter of lack compatibility USB BIOS. When Bitlocker should read, yet there is no actifvity on the USB key. It seems to just try to read the empty floppy drive then give up.

  The PC is an all-in-one RM with an Intel D915GX motherboard.

  I tried two different USB, 64 megabytes cheapo player drives I usually use as a Bitlocker key and a 2 GB Cruzer Blade. I mucked with some of the BIOS settings but not in a particularly organized way. And I checked the key file is saved on the disk. Everything I did, Bitlocker will not always see the USB.

  Any suggestions?

  Hello

  Thank you for you answer and share the status of the issue.

  Sorry for the late reply.

  I suggest you to please update your motherboard chipset drivers

  Follow the link below:

  https://Downloadcenter.Intel.com/SearchResult.aspx?lang=eng&ProdId=1676

  You can also check the drive (that you encrypted) to find errors by following the link below:

  Check a drive for errors

  http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

  WARNING:

  Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost

  Additional information:

  In Windows 7 BitLocker Drive Encryption: frequently asked Questions

  http://TechNet.Microsoft.com/en-us/library/ee449438 (WS.10) .aspx #BKMK_USBDrive

  Deployment Guide for Windows 7 BitLocker Drive encryption

  http://TechNet.Microsoft.com/en-us/library/dd875547 (v = ws.10) .aspx

  Hope this is useful

• Download USB key or camera.

  Why can't I download images from my camera or USB key.  Never had a problem until lately.  It "is like the port is dead and does not recognize anything.

  Hi GlendaFerguson,

  1. have you tried to use the USB key or camera on a different usb port and in another computer?

  2. what happens when you use other usb on the same USB devices?

  3. you receive an error message/code?

  4. What is the number of brand and model of the computer?

  This problem can be caused if the USB is corrupted or Windows cannot find the necessary drivers for the device. I suggest you to refer to the methods and check if it helps.

  Method 1:

  Run the hardware troubleshooting tool. Click on the link below.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

   

  Method 2:

  Remove and reinstall all USB controllers

  To remove and reinstall all USB controllers, follow these steps:

  (a) click Start, type Device Manager in the start search box and press ENTER.

  (b) expand Bus USB controllers.

  (c) right click on each device under the Bus USB controllers node and then click Uninstall to remove them one at a time.

  (d) restart the computer to reinstall the USB controllers automatically.

  (e) connect the removable USB storage device or camera and perform a test to ensure that the problem is solved.

  Method 3:

  If the problem persists, see the article help.

  My drive does not appear in Windows Explorer

  http://support.Microsoft.com/kb/330140

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base. How to back up and restore the registry in Windows:
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  See the following Help article and check if it helps.

  Tips for solving problems of USB devices

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  (Also applies to Windows 7)

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• results after you start the netbook with the bootable usb key

  do you do after you make the bootable USB key and start your netbook and just windows 7 Professional can't choke and it want let me to upgrade or to perform a custom installation?  & What drivers should I install?

  If you want to upgrade your Netbook Windows 7 Starter to Windows 7 Professional, you must use the upgrade wizard Express Windows as well as the key to Windows 7 Professional.

  If the license for Windows 7 Professional, you have access to is a retail version update or complete, you can use the product key and the Express upgrade from Windows 7 Starter to Windows 7 Professional. First of all, check that the edition of Windows 7, you are upgrading is already enabled (if it isn't, you will encounter complications and that you might start all by performing a clean installation).

  Click Start, type Anytime Upgrade, click on the option enter a key, enter the key of Windows 7 Professional on demand, click Next, wait while checking the key, accept the license agreement, click on upgrade, wait while the software upgrades, (it may take 10 minutes or more depending on the if updates are required) your computer restarts automatically, after the reboot, Windows 7 will notify you updating the computer, the computer will restart once more automatically and will be completed the upgrade, a window will appear notifying the upgrade was successful and your computer is ready to use, click Close, you should be upgraded to Windows 7 Professional your files, programs and settings retained.

• USB key is always write protected even if the value is zero

  WHEN READ VALUE IS SET TO ZERO PENDRIVE NOT REMOVED THE WRITE PROTECTION

  Hello

  1. Are you having the same problem, if you connect the USB to different computer?
  2. Are you having the same problem if you connect different USB key to your computer?
  3. What is the brand and model of the pen driver?
  4. Have you tried making the virus for USB scan?

  Write protection is a feature found on many different types of media. When the write protection is turned on, you will be able to view the information on the disc or USB key, but you won't be able to write or transfer information to it.

  Write protection is an element of protection which prevents accidental deletion of important data. Sometimes turning off the write protection is as simple as uncapping the USB key to find a manual switch. If your player lacks an external switch, the procedure requires a few steps to complete.

  (a) turn on your computer and plug the drive after that your operating system is loaded.

  (b) open 'My computer' and the list of readers of research until you find your USB drive letter

  (c) right click on the name, then click 'properties '. Browse the tabs until you see the option to remove the write protection. If this does not work, proceed to the next step.

  (d) visit the website of the company for your USB key. Go to the help or support section and search for "write protect".

  (e) search the Internet for software that will remove the write protection. Download the program and install it on your computer.

  (f) open the software. Follow the instructions to remove your USB write protection.

  I also suggest you analyze your USB key with the Microsoft Safety Scanner, which would help us to get rid of viruses, spyware and other malicious software.
  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
  
  Important: While running scan on the hard drive if bad sectors are found on the hard drive when scanning try to repair this area if all available on which data may be lost.