Legitimate access to invalid error code.

Similar Questions

• Windows cannot access \\[other computer] error code 0 x 80070035

  I have 4 laptops, 2 Win7, 1 running Win8.1 and 1 running Ubuntu 14 running. I used to have access to the other occasional problem, which was fixed by rebooting the router. I changed the 1 billion in the most recent router and I lost the connection between all Windows machines. Machine of Linux works fine, can access the shared folders on all Windows machines can ping all Windows machines can ping Linux machine, but cannot ping each other. Even in mode 'security '. All Win computers can access shared folders on the Linux machine. I searched and tried most of the solution without success. It must be a bug in the Windows operating system, preventing them from talking to each other and I can't put my finger on it.

  Hey Jake,

  Thanks for posting your question in the Microsoft Community. We apologize for the inconvenience caused to you.

  What antivirus application do you use?

  Check out these links and check the issue.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-Networking/cannot-access-computer-name-error-code-0x80070035/0d0af4ce-10ea-42b3-8755-f044848e9fce?page=3

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/Windows-cannot-access-error-code-0x80070035/94b0d58d-6ed7-458C-9A18-74c9524627ce

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/error-code-0x80070035-lap-top-computer-on/e36bfd8e-E540-475D-b704-7364d303f78b

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/Windows-7-network-error-code-0x80070035-Windows/84791143-B70a-4EC2-B700-98df657fe45c

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Note: You should not turn off Windows Firewall unless you have another firewall is enabled. Turning off Windows Firewall may make your computer (and your network, if you have one) more vulnerable to damage caused by worms or hackers.

  It would be good that you post this question in the TechNet Forums, where we have some support professionals who are well equipped with the knowledge on networking issues, to please visit the link provided below.

  https://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itpronetworking

  I hope this helps. Please let us know if you need assistance.

• Object format invalid error Code 14 of the Blu - ray 0 x 00010402 not valid resolution

  Hey guys,.

  really need help here burn my blu - ray

  There is an error msg saying

  Purpose of Blu - ray: ' < Button > error: 'Invalid Format', Code: "14" Note: 0 x 00010402 no valid, graphic resolution must be at least 8 pixels, but no more than 4096 pixels in height and width Spec 9.14.4.2.2.2.1.1.1.

  He finished transcoding all until right when it will burn this error msg appears.

  Any help would be great.

  Thanks in advance!

  The solution: If you use a model of the internet or the library, when you edit in photoshop, you must let the background checked and it just put the new image. The problem is not with the buttons. The problem is in the background. In order to not turn off the bottom of the models, just put a new on it.

• Unable to access NIC 0xc0070643 error code.

  It appears whenever I try to load a new program.  He started since I downloaded a program from the windows site to help with the computer.  After that the problem began, I uninstalled the program again, but now get the error code above.

  Hello

  1. when exactly you get the error message?

  I suggest you to follow these steps and check if that helps:

  Method 1:
  Start the computer in safe mode and check if the same problem occurs:
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

  Method 2:
  Try to perform the clean boot and check if it helps:
  http://support.Microsoft.com/kb/310353

  NOTE: When you are finished troubleshooting, make sure that put you the computer in start mode normal as suggested article above.

  It will be useful.

• Unable to access app store error code '0 x 80070032' on Windows 8

  Original title: New Windows 8 setup cannot connect to the store or to run existing applications. Error 0 x 80070032.

  I bought a new HP desktop computer and the Windows 8 installer with my existing Microsoft Account.  Loaded all my office applications (Office 365, Quickbooks, Firefox, Chrome, Foxit Phantom, iTunes, several printers) and everything seemed fine.  I then know not only all my Apps were synchronized.  When I try to go to the store, it says "we were not able to connect to the Bank. It could have happened because of a delay of network connection server problem. Please wait a few minutes and try again. "When I click 'Try Again', the store opens, but if I try to download an App I get an error 0 x 80070032.

  I went to a local account and vice versa and also to an another Microsoft Account and vice versa.  Nothing helps.

  Also, if I click on some of the Apps I have, like the live tile of Bing, it flashes on the screen of Bing and then returns to the start screen.

  I don't want to have to start over after spending many hours this thing with all my software from loading.  Help!

  Please see my fix here

• Error Code 0 x 80070005 access denied

  Auto update is on

  KB2607712 is installed

  I always get access to the error code 0 x 8007005 decied.

  [Looks like you have a hijackware infection on your hands!]

  Please answer all the questions of diagnostic following by number in your very next answer (no need to quote this post):

  1. what you do when you receive these errors 0 x 80070005 access denied ?

  2. did you uninstall the AOL/McAfee or Microsoft Security Essentials freebie?

  3. If you have enabled (used) free trial Norton which is preinstalled on your computer when you bought it, has the free trial period (or your purchased subscription) already expired at the time where you have installed another anti-virus application?

  4. do you have a uninstall Norton AND THEN (b) download/run the Norton removal tool [1] & restart (c) BEFORE you installed another anti-virus application?

  ==================================================================
  [1] ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

• Logon Windows Live Family Safety - access denied - error Code 80070005

  Hello

  I can't connect to Windows Live family safety.

  I had it installed previously and it worked but he kept asking to open a session. When I tried to connect, I get the error.

  I uninstalled it and re-installed, but still the same. After installation, I can not connect. I get this error message.

  Access denied

  Error code 80070005

  I also had installed "Action Alert" because I'm under Win 7 and the time allocation feature works on Win 8 so I used Action Alert for the feature of time allocation.

  I uninstalled it also.

  Any help greatly apppreciated.

  Hi Wayne,

  Thanks for posting your question in the Microsoft Community forum.

  Let me try and help you with this problem.

  The "Access denied" error '80070005' error Code indicates that you do not have the permissions to change the parental control settings.

  1. Are you logged on to the computer as administrator?
  2. Are you signed in to the Family Safety with ID Parent website?

  First, check the date and time is set correctly.
  Right click on the clock in the system tray. Select adjust Date and time.

  Check and correct the month, day, year, hour, minutes and time zone.

  Reboot if you have changed all the foregoing.

  I would also refer to suggestions provided by "Christian_Co" and check if it helps:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-security/update-Windows-Live-Essentials-problem-error/e041a0d0-01FF-4E39-80c9-814a0aa3da19

  Note: Microsoft Safety Scanner: data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.

  Try these steps and let us know the result. If you have any other questions, we will be happy to help you.

• I have an error code: sec_error_untrusted_cert when I try to access my secure school Web site

  I have an error code: sec_error_untrusted_cert when I try to access my secure school https://my.saintleo.edu/Web site. I run Firefox 32.0. When I have this error, it will not even let me add the exception, because it is "grayed out." Please I need help.
  Thank you

  Hello regba123, can you try to reset the file cert8.db in your profile folder, as described in "this connection is untrusted" error message - what to do?

• After the 27.0.1, I can access is no longer on a secure site. I now get error code: ssl_error_bad_mac_alert. It worked before the upgrade.

  I'm trying to access the administration page of GUI on my wireless controller. It's using a certificate issued by the vendor who makes it, so the names do not match. I created a permanent exception for the certificate. Whenever I try to access the site, I now get the following error every time:

  The secure connection failed

  An error occurred during a connection to 172.24.6.10:4343. Peer SSL reports incorrect Message Authentication Code. (Error code: ssl_error_bad_mac_alert)

     The page you are trying to view cannot be shown because the authenticity of the received data could not be verified.
     Please contact the website owners to inform them of this problem. Alternatively, use the command found in the help menu to report this broken site.
  

  This page worked fine before the most recent update.

  Y at - it a setting or something I can change to allow this page to load?

  I saw reported problems caused by Firefox with the help of a few specific cipher suites that are not properly supported by the server.

  A possibility to test this is to disable all the SSL cipher suites on the topic: config page (i.e. switches security.ssl3. * prefs that are true to false) and allow both to see if you can find the culprit and continue this suite disabled and reset others or continue its tests to see work encryption algorithms.
  
  Do a hard refresh the tab with the page of 172.24.6.10:4343 via Ctrl + F5 after each change.

  You can open the topic: config page via the address bar.

  • http://KB.mozillazine.org/about:config

• Suddenly, * only with Firefox * display all the computers in the House (error code: ssl_error_rx_record_too_long) trying to access any Google product.

  Today, all the laptops in the House (last FF ver) started throwing the error:

  (Error code: ssl_error_rx_record_too_long)

  Trying to access any Google products: gmail, Google + Analytics, Google Web site, etc.

  
  

• Time machine is unable to perform a backup. Not able to access the sparsebundle. Problem occurred first on snow leopard OS. Followed Dragon upgrade to El Capitan. Only difference has error code of 109 changed to null. What about someone?

  Time machine is unable to perform a backup. Not able to access the sparsebundle. First of all, there is problem with the Snow Leopard operating system. Dragon followed in the upgrade to El Capitan. Only difference was error code 109 changed to 'null '. What about someone?

  We need some info.

  You can access from the finder Time Capsule? If this isn't the case, then Time Machine will not work.

  You upgrade the computer snow to El Capo and keep the same name?

  If you want to backup, it is best to start again... clean the new backup any attempt to add a previous backup failed.

  I recommend that you actually erase the TC... do a complete factory reset and start again.

  The previous backup if necessary can be archived on a USB drive connected to the TC assuming that Airport utility can still access it. Airport utility accesses the TC?

  With update installs all sorts of things can go wrong... so tell me more if you can not get anywhere.

• Receive the "403 Forbidden" error code on a Web site, I've been accessing years. It is written "forbidden you don't have permission to access the/_cqr/login on that server." I can access this site (AOL) on other browsers. Help!

  Receive the "403 Forbidden" error code on a Web site, I've been accessing years. It is written "forbidden you don't have permission to access the/_cqr/login on that server." I can access this site (AOL) on other browsers.

  I emptied my cache.  I rebooted Firefox.  This is my email website - never had a problem before.  I am able to access it on Safari.  I even tried the simple address (rather then my bookmarked login address) - still got the same error message!
  

  I have the same problem: it is written ' forbidden you don't have permission to access the/_cqr/login on that server. " I can access this site (AOL) on other browsers. After that I connected to AOL, I get this message. then I go to the address line and delete everything after than the aol.com and her and then press ENTER. then, I'm registered and can read my emails. How can we solve this problem?

• Access to the Windows Update site 0x8024402C error code failed?

  Access to the Windows Update site 0x8024402C error code failed? Regds, 'a journey of a thousand miles begins with a first step."

  Resolution: 0x8024402C error Code

  Method 1: Remove the characters from the list of exceptions to the proxy and then clear the proxy cache to do this, follow these steps, as appropriate for the operating system that you are running. Windows 2000, Windows XP and Windows Server 2003

  1. Open Internet Explorer.
  2. On the Tools menu, click Internet Options.

     Note If the menu is not available in the Internet Explorer window, press the ALT on the keyboard to display the menu.

  3. Click the Connections tab and click LAN settings, and then click Advanced.
  4. Remove all the entries in the Exceptions section, and then click OK.
  5. Close Internet Explorer.
  6. Click Start, run, type cmd, and then click OK.
  7. Type the following commands. Press ENTER after each command.
     • proxycfg d
     • net stop wuauserv
     • net start wuauserv
  8. Try again to install updates.

  Windows Vista and Windows Server 2008

  1. Open Internet Explorer.
  2. On the Tools menu, click Internet Options.

     Note If the menu is not available in the Internet Explorer window, press the ALT on the keyboard to display the menu.

  3. On the Connections tab, click LAN settings, and then click Advanced.
  4. Remove all the entries in the Exceptions section, and then click OK.
  5. Close Internet Explorer.
  6. Click Start
     The collapse of this image enlarge this image

     

     , and then type cmd in the box start the search.

  7. In the list of search results, right-click on Cmd.exe, and then click Run as administrator.
     The collapse of this image enlarge this image

     

     If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  8. Type the following commands. Press ENTER after each command.
     • netsh winhttp reset proxy
     • net stop wuauserv
     • net start wuauserv
  9. Try again to install updates.
   

  Method 2: Enable the option "Automatically detect connection settings" in Internet Explorer to do this, follow these steps:

  1. Open Internet Explorer.
  2. On the Tools menu, click Internet Options.

     Note If the Tools menu is not available in Internet Explorer, press the ALT key to display the menu.

  3. On the Connections tab, click LAN settings.
  4. Click to select her automatically detect settings check box, and then click OK.
  5. Try to install updates again.

  Kind regards
  Sohail Patel Regds, 'a journey of a thousand miles begins with a first step."

• Error code: 0x800A0046 while windows update sites access & installation of updates... ?

  Error code: 0x800A0046 while windows update sites access & installation of updates... ? Regds, 'a journey of a thousand miles begins with a first step."

  "Resolution of the error code: 0x800A0046".

  To resolve this problem, follow these steps on the client computers. Step 1: Verify the DCOM security

  1. Click Start and run, type Dcomcnfg, and then click OK.
  2. Expand Component Services and then expand computers.
  3. Do right click my computer and then click Properties.
  4. Click the COM Security tab
  5. Under access permissions, click on change by default.
  6. Check that the following accounts are listed:

     On Microsoft Windows XP-based and Microsoft Windows Server 2003 clients

     The collapse of this Expand table this table

     Account name	Permission type	Permission
     Gites, administrators or a user who belongs to the Administrators group	Local access	Allow
     System	Local access	Allow

     On clients based on Microsoft Windows 2000

     The collapse of this Expand table this table

     Account name	Permission type	Permission
     Directors	Local access	Allow
     System	Local access	Allow

  7. If either of these accounts is missing in the access permission box, follow these steps:
     1. Click Add, click Advanced and then click locations.
     2. In the location box, click the Local_Computer_Name and then click OK.
     3. Click Find now.
     4. Press CTRL and click the required account names, and then click OK twice.
     5. In the group or user names box, click an account that you have added, click Local access in the permissions for box Account_Name and then click to select the check box in the column allow.
     6. Repeat step 7 for all accounts that you just added, and then click OK.
  Step 2: Check the DCOM default properties
  1. Click the default properties tab.
  2. Make sure that the following configuration:
     • The Enable Distributed COM on this computer check box is selected.
     • In the default authentication level box, the connection is selected.
     • In the default impersonation level box, the identification is selected.
  3. Make the necessary changes and then click OK.
  4. Restart the computer.

  Step 3: Verify that your user account is not a member of the guests group note this step applies only to computers that are running Windows Server 2003, Windows XP Professional, or Windows 2000 and that are not joined to a domain.

  1. Click Start, click settings, and then click Control Panel.
  2. Double-click Administrative Tools.
  3. Expand computer management, and then expand local users and groups.
  4. Click users.
  5. In the right pane, double-click the account that you used to log on the computer.
  6. Click on the Member tab of.
  7. Click guests, click on remove and then click OK.

  Step 4: Check the security descriptor in customers service updates automatic-based on Windows Server 2003 and Windows XP-based

  1. Click Start, run, type cmd, and then click OK.
  2. At the command prompt, type the following command and press ENTER to reset the security descriptor:
     SC tisb wuauserv D: (A; CCLCSWRPWPDTLOCRRC; SELLERS) (A; CCDCLCSWRPWPDTLOCRSDRCWDWO; (BA) (A; CCLCSWLOCRRC; AU) (A; CCLCSWRPWPDTLOCRRC; CENTRAL UNIT)

     Note in a domain environment, this security setting may be configured by a Group Policy object. If the problem is resolved temporarily after you type this command, a Group Policy object is probably configured. The domain administrator must modify group policy to include the appropriate security settings.

  Windows 2000-based clients

  1. Download the Subinacl utility. To do this, visit the following Microsoft Web site:
     http://www.Microsoft.com/downloads/details.aspx?FamilyID=e8ba3e56-d8fe-4A91-93Cf-ed6985e3927b & amp; amp; displaylang = in (http://www.microsoft.com/downloads/details.aspx?FamilyID=e8ba3e56-d8fe-4a91-93cf-ed6985e3927b & amp; amp; DisplayLang = en)
  2. Double-click on the downloaded file and follow the instructions in the Windows Resource Kit Tools Setup Wizard. By default, the Subinacl utility is installed in the following directory:
     C:\Program Files\Windows Resource Kits\Tools
  3. Click Start, run, type cmd, and then click OK.
  4. At the command prompt, type cd C:\Program Files\Windows Resource Kits\Tools to move to the directory where the Subinacl utility has been installed.
  5. Type the following command and press ENTER:
     Subinacl/service wuauserv /sddl = D:(A;;) CCLCSWRPWPDTLOCRRC; SELLERS) (A; CCDCLCSWRPWPDTLOCRSDRCWDWO; (BA) (A; CCLCSWLOCRRC; AU) (A; CCLCSWRPWPDTLOCRRC; CENTRAL UNIT)
  1. Note in a domain environment, this security setting may be configured by a Group Policy object. If the problem is resolved temporarily after you type this command, a Group Policy object is probably configured. The domain administrator must modify group policy to include the appropriate security settings.
  Step 5: Check the local security policy

  Notes

  • This step applies only to the Windows Server 2003-based, Windows 2000-based, or Windows XP Professional computers.
  • If your user account is in a domain, this security setting may be configured by a Group Policy object that is located on the network. Contact the network administrator, or see the following article for more information Microsoft Knowledge Base:
    810739 (http://support.microsoft.com/kb/810739/) white paper: Troubleshooting Group Policy in Windows 2000
  1. Click Start and run, type gpedit.msc, and then click OK.
  2. Expand Computer Configuration, expand Windows settings, expand Security settings, and then expand local policies.
  3. Click user rights assignment.
  4. In the right pane, double-click on impersonate a client after authentication.
  5. Verify that the Service accounts and directors are included.
  6. If the Service account or the Administrators account is missing, follow these steps to add the account:
     1. Click on add a user or group, click Advanced, and then click locations.
     2. In the location box, click Local_Computer_Name, and then click OK.
     3. Click Find now.
     4. Press CTRL and click the required account names, and then click OK three times.
  7. Restart the computer.

  Step 6: Enable the persistence of user data in Microsoft Internet Explorer

  1. Open Internet Explorer.
  2. On the Tools menu, click Internet Options.
  3. Click the Security tab, and then click Internet.
  4. Click on custom level.
  5. In the settings dialog box, scroll down to the Miscellaneous section.
  6. Under the Userdata persistence, click Activate.
  7. Click OK two times.

  Kind regards
  Sohail Patel

  Regds, 'a journey of a thousand miles begins with a first step."

• Cannot access Pathname you have the appropriate permissions. Cannot download updates gives error code 643 and error code 5. Always gives access denied.

  Cannot access Pathname you have the appropriate permissions. Cannot download updates gives error code 643 and error code 5. Always gives access denied. You do not have the appropriate permissions. I am the administrator. Change all the complete control. Any other suggestions? Possible virus?

  Hello

  You are unable to download the updates?

  Try the following steps to resolve the problem:

  Method 1: Temporarily disable any security (including firewalls) software and check if the problem persists.

  Check out these links:
  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  If disabling the security software solves the problem, then contact the manufacturer of the specific security software to fix the problem.

  Important: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable
  your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are
  connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2:
  See the article mentioned below and run the Fixit diagnostic tool to fix the error 643.

  You receive error code 80070643 0 x or 0 x 643, code error when you use the Windows Update or Microsoft Update Web sites to install updates:
  http://support.Microsoft.com/kb/958052

  
  Kind regards
  Afzal Taher-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.