Length of command line with dynamic text
HelloDoes anyone know how to control the length of a line with a dynamic text input?
I have two buttons, which increases the value of a dynamic text of 1 every time that it is pressed and another which decreases. The display shows the number that results. I want to draw a line that increases or decreases in length with that number.
Any ideas?
Thank you!
Well, you could take a text field value and multiply it by a constant for the length of your line. Once you have this number, you can draw the line dynamically using the drawing API or change the width of a movieclip with a line in...
Let's say you have a movieclip with an instance name of line_mc and your dynamic text field has an instance name of myTextField, you can change the width of the line_mc like this:
line_mc._width = number (myTextField.text) * 10;
Tags: Adobe Animate
Similar Questions
-
How to jump a line with dynamic text in AS2
Hello!
I have another question, how skip a line using dynamic text? I want to do the following:
-DYNAMIC TEXT-
Title
asdasd
Maia
asdasd
-THE END OF THE DYNAMIC TEXT.
I tried the following:
_root. RLinfo = ' - Info--
";
I get an error.
This:
_root. RLinfo = "-Info- asdasfasfsa"
He will only jump 1 line.
This is probably a very stupid question and has probably been answered a 1000000 times but I am too lazy to google it.
Any help is appreciated, Erik
You are welcome
-
Original title: ping does not work
In the cmd box when I try to ping from a site, I get a message saying 'ping is not recognized as an internal or external command.'
I entered the command as follows: Office > ping www.yahoo.com
Dan Calic, salvation
Thanks for posting your question in the Microsoft Community.
I understand that you are unable to ping a website in command line with an error message: 'ping is not recognized as an internal or external command.' Correct me if I'm wrong.
I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.
To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:
1 are you facing problems when accessing Internet?
2. have you made any recent hardware or exchange of software on your computer before the show?
Please follow the steps and check the question below:
a. click Start, and then type the three letters cmd in the search box and then right-click on command prompt and click run as administrator.
b. type these commands and press enter after each:
dir %SystemRoot%\System32\ping.exe
path %path%;%SystemRoot%\System32
Ping www.yahoo.com
c. a report.
Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.
-
Hello, all.
I'm having trouble with dynamic text not displaying only not on the scene during execution. When I test the scene, fields of text but loading, but when I test the movie, or run publish a snippet, the text is not there. Some figures appear unstable in the text fields, but are often completely empty. --J' did ensure that the fonts have been included and I can't understand why this is happening.
Any ideas or suggestions are greatly appreciated.
Thank you.
Try another font which has called to work correctly, such as Arial and see if you still have the problem. Not all fonts can be embedded correctly...
-
Open a command line with attached pll forms.
Hi guys,.
I try to open a fmb online ordering, but this WBF has an attached pll and I get error frm-18108, then
There is somehow open this form with its pll, in the command line...
If I try with a fmb without pll, it works
I m using forms 6i and oracle 10 g
ifbld60. EXE c:\sa\fmb_work\wx010.fmbl userid=wl/wl@P10G
Thank you...Where are your PLL files are? In the c:\sa\fmb_workdirectory? Your FORMS60_PATH contains this directory?
see you soon
-
Drag a clip movie with dynamic text inside box?
Hi team, I can slide a movieclip with static text inside, but when I change the dynamic text, I get a not found Startdrag property on Flash.text.textfield and there is no default value. Any help?
See you soon
void
assign to your movieclip on false mouseChildren property.
-
How to specify a length of straight line with the Brush tool
Hello
I want to draw a few straight lines that have the same look as the paint brush tool. that is the ends of the lines have rounded ends.
The thing is, I want to be able to specify the length of these lines.
(1) can I do this with the paint brush tool? So be specific with the length of the line, for example that I can specify in some fields or something like that?
(2) otherwise, I use the online tool to look the same as a line of paint brush?
David.
Hi David.
Option 2:
Select the line Segment tool (shortcut "------"). Click the origin. The dialog box should open. Specify the length. Apply a line with round cap. Adjust the width of the line and color to your liking.
I hope this helps.
Peace,
Lee
-
Insert several lines with dynamic data
Hello
When I do an insert into a table that has several lines of dynamic information. on
a page, it inserts all rows that are dynamically filled. I want only what he
to insert the lines that I choose the initials on. How can I do? Let's say I
have 5 items that are displayed on a page and I want to insert only original
the first 2 because the last 3 are left blank, how should I do this? I tried
implementation of an if statement that says:
< cfif "form. "Help of # PNR_Approval_Initials #" NEQ "" > "".
Then make the insertion in the table
< cfelse >
< / cfif >
I have this game were also up in a loop that says:
< cfloop index = "help" list = "" #form.listofids # "delimiters =",">"
Here is the code for just the insertion. I also have a code here
Update another table. I got this to work, so I just try to get the insertion
works fine for the moment. I can not use this where the query statement:
Where ItemID = #id # because I'm trying to insert into the table of approval, not
the items table. The table is just updated with some other info. in
a few other input boxes.
< cfloop index = "help" list = "" #form.listofids # "delimiters =",">"
< cfif "form. "Help of # PNR_Approval_Initials #" NEQ "" > "".
< cfquery Datasource = '#application. DataSource #">"
Insert into accreditation (APV_ItemID,
APV_ECID,
Document_Type,
Approval_Initials)
Values (' #Evaluate ("form.) (' ItemID # help # ") #',
' #Evaluate ("form. ("ECID # help #") #',
< cfif isDefined (form '. ') ("Help of # PNR_Doc_Type # ') and
"form. "Help of # PNR_Doc_Type #" NEQ "" > "".
' #Evaluate ("form. ("Help of # PNR_Doc_Type # ') #',
< cfelse >
NULL,
< / cfif >
< cfif isDefined (form '. ') ("Help of # PNR_Approval_Initials # ') and
"form. "Help of # PNR_Approval_Initials #" NEQ "" > "".
' #Evaluate ("form. (Aide de # PNR_Approval_Initials #») #
< cfelse >
Null value
(< / cfif >)
< / cfquery >
< / cfif >
< / cfloop >
On the page display, just a table of dynamic info. Here are the 4
things that I have on this page that needs to be inserted to the database.
< input type = "hidden" name = "' ECID #ItemID #" value = "#ECID #" > "
< input type = "hidden" name = "' ItemID #ItemID #" value = "#ItemID #" > "
< input type = "hidden" name = "" PNR_Doc_Type #ItemID # ' value = "PNR Req" > "
< td align = "center" >
< cfif Approval_Initials is not "" > "".
#Approval_Initials #.
< cfelse >
< select name = "PNR_Approval_Initials #ItemID #" >
< option value = "" > select initials < / option >
< cfloop query = "ShowInitials" >
< Cfif Engineer_Initials EQ 1 >
< option value = "#Initials #" > #Initials # < / option >
< / cfif >
< / cfloop >
< / select >
< / cfif >
< table >
Can someone help me please on just the insertion in the database so that it
will insert on the lines that I chose the initials on and not others? Thank you.
AndyYou almost managed, but I see that you have commented.
(" The help of # PNR_Approval_Initials # ') AND form ["PNR_Approval_Initials # help #" ""] NEQ "" > Do things here
-
Weird problem with dynamic text
Hello
I created a dynamic text field - mediaImportName001 (created and it contains the name of a file that I have chosen to import them using a browser (as3 and AIR) button.)
It works very well - I can import the file, and the name appears in the field.
I would now like to pass the content of the text field to another text field. But I'm not content. If I try to find the contents of the textField trace("mediaImportName"+thisNum).text - Flash returns "undefined" (even though I'm him asking to draw once the field has been filled).
I use the following code to check that the material is really there and named correctly (the code returns the children):
for (var i: uint = 0; i < this.numChildren; i ++) {}
trace (this.getChildAt (i) .name + "\t type:" + typeof (this.getChildAt (i)) + "\t" + this.getChildAt (i));
}It returns:
object: type instance370 [object, form]
object: type mediaImportName001 [TextField object]
object: type mediaFiletype001 [TextField object]How can I get Flash to give me the text in mediaImportName001?
It's weird - this.getChildAt (i) .name
from above gives me...
mediaImportName001,
yet
trace (['mediaImportName' + thisNum] .name);
returns undefined (thisNum represents an increment I used to name several clips and text fields and in this case trace (thisNum); return 001)
Any ideas why this happens?
Thank you
Shaun
No logic problem, just a problem with describing the problem (as far as the fix goes) and using the property name (as far as the issue goes). There is a difference between the creation of a dynamic textfield (a type of textfield) and dynamically a textfield (using code to create).
In AS3, the name property is a property and it is not the same as the name of the instance that you can assign to an object on the stage. To target an object using its name property, you must use the getChildByName() method, or alternatively, you can use the variable you used to create it. You may need to cast as a TextField object as well as to operate...
trace (TextField (this.getChildByName ("mediaImportName" + thisNum)). (Text);
which would produce the same result as the use of...
trace (mediaImportName.Text);
I don't know how the numbering disperses on "001", but you might find it easier to work with by storing just the instances of an Array by using the media_file_num to set the index where they get. Then, you would be able to target the textfield to help...
trace (tfArray [thisNum]. (Text);
-
ScrollPane + problem with dynamic text.
Hello
I use the ScrollPane component to display a movieclip that contains text. So far, I went to a few paragraphs, with the text field defined on "Static text"... but as I wrote a few more I noticed that the text box displays only half of my text. So I went to the "dynamic text", which solves the problem of display and get 100% of my text but now I always displayed onstage, even if it is available in the library... strange!
Could somone help me please?
Kind regards
vedtam
There is no visible scrollpane.
-
Hello!
When I do next...
1 dynamic Text: the text should be editable in ActionScript
2. graphic: contains an Imagearriereplan and dynamic text.
3 MovieClip: Contains a Tween alpha between the graph above.
dynamic text is not mix on, the fact of the Imagearriereplan. (in exported movie, ctrl + enter)
However in the previewmode (pressing enter) the text is mixture out.
My question is: is it possible to mix a text? I think that some time ago I saw an ActionScript command to do so. But I want to tell an interpolation of alpa.
And why it works in previewmode (enter) and not in the exported sequence (ctrl + enter)?
Welcome, TschoubaYou need to incorporate the outlines of fonts so that it works
-
Newb needs help with dynamic text
Hello world
I'm not a newb - but that's how...
I am trying to create a multi-page form that allows uses to register the products.
The first page asks you name etc., and on the second page, I want to say "Welcome"+ username "!" -This kind of thing...
The problem is that I can't seem to keep the values of dynamic text through the pages.
I can get it to repeat the entry on the first page with this code:
_root.firstname_txt. OnChanged = function() {}
_root.firstname_repeat. Text = "Hello"+ _root.firstname_txt.text; "
};
However when I call on the second page it is not defined:
second_repeat. Text = "Hello"+ _root.firstnamt_txt.text; "
trace (_root.second_repeat.text);
I'm sure it's something simple and I am just a dunce of programming...
Any help is appreciated.
yourIf your textfield (_root.firstname_repeat) does not exist on the 2nd frame, its text property will be indefinite.
to remedy, or extend the existence of your textfield in frameworks or use a variable to store its text property (in your manager onChanged) and use this variable to retrieve the value you need.
-
Error in command line with RH 6
I imported a X 5 of the HR 6 and I tried to use the command line to generate the chm file, but after the scan is finished, a message box appears with the following message "RHCL.exe has encountered a problem and needs to close. We are sorry for the inconvenience"then, HR firm. I can compile this project in HR GUI.
The main reason we went to 6 HR is the feature of the command line, but now it does not work. I'm so sad.
Someone here can help me with this problem or give me some clues at least.
Thanks in advance.
Thank you Peter, Colum and Harvey.
Finially, I had this problem sovled. :))
First of all, I used your ideas to find the subject at issue. It took me 2 hours. Not too bad.
Then I scanned in this topic and dug the sentences that caused the problem in Truecode discovered:
...
...I removed above phrases, the problem disappeared. I can now use the command line compiler.
I don't know how and when these keywords have been added to the project. This project was owned by someone else before. I added these keywods in the Index tab, that all goes well. So there is no impact on my project.
However, I think that the command line compiler should be able to manage this kind of sentence 'meta' if the compiler in the GUI can do.
Can I think that it is a defect of RH6 it is designed like that or it's a fault of my project?
AGsMM
-
Help with dynamic text and cursor hand
The buttons I create do not display the hand cursor. I tried searching for an answer and found nothing. These are buttons in movieclip with a dynamic text field. I already passed the unselectable text, and I use: b1.buttonMode = true;
B1.mouseChildren = false;
-
Filled with dynamic text by key STROKE
I've implemented the the user clicks a button and gives me the result of what they clicked, however how I put in a dynamic text field. I have problems with the AS3 code for it. Here's what I have so far. Any help would be appreciated. Thank you.
package LIKE {}
import flash.display.MovieClip;
import flash.display.DisplayObject;
import flash.events. *;
import flash.ui.Keyboard;
SerializableAttribute public class KeyboardExample extends MovieClip {}
public void KeyboardExample() {}
stage.addEventListener (KeyboardEvent.KEY_DOWN, keyDownHandler);
stage.addEventListener (KeyboardEvent.KEY_UP, keyUpHandler);
}
private void keyDownHandler(event:KeyboardEvent):void {}
trace ("keyDownHandler:" + event.keyCode);
trace ("key pressed:" + string.fromCharCode(0)) (event.charCode));
stage.texttest.Text = string.fromCharCode(0)) (event.charCode);
}
private void keyUpHandler(event:KeyboardEvent):void {}
trace ("keyUpHandler:" + event.keyCode);
}
}
}
that seems fine except for one thing - you are referring to an instance on the stage through the stage class. (I understand the confusion!)
must be:
Maybe you are looking for
-
Skype 7.12.0.101 stops automatically in windows 10 home 64-bit
Hello The Skype app for my windows 10 stops automatically at startup. The problem started with version 7.11. I tried uninstalling and reinstalling several times but nothing helped. I enclose the dxdiag info. I have 2 graphics card in my system: Intel
-
My new Mac Pro stays on my wifi at home, but falls constantly internet.
My new Mac Pro stays on my wifi at home, but falls down the internet. have 2 IPads and 1 PC on the same wifi and it never happens to them.
-
Equium L350/l350D, no wireless connection option
I can't seem to find an option to connect to the internet wireless, when I go to the Connection Wizard, I have only the option of broadband and dial-up. Any ideas?
-
How to set up a batch file to run on start up?
I try to add the following directory on the path: C:\python27\ I looked online and put the following code in a .bat (SetPath.bat) file: set path = % path %; C:\python27\ Then I copied a shortcut to SetPath.bat in the startup folder. But this doesn't
-
What is CAntiVirusCOM.dll file in cProgram Files pure networks shared\platform\? What is doing? Is this necessary? It can be disabled? Thank you