Lenovo A6000 OTA update error (status 101)

Similar Questions

• K5 Lenovo VIBE Plus 3 GB OTA update fails

  Hi all

  I followed all the posts on this issue for the past two days. First of all Lenovo Assistant smart giving a screen empty, so I can't check the updates through my pc. I tried to download the update in mobile and then used 'Bad' backup file ' / data/data/com.lenovo.ota '. I extract a zip file (named random) this backup who was about 60 MB and then had India.ota.zip and System.zip. Then stick the two of them in the memory of the phone and started to blink.

  India.OTA.zip worked normally and my laptop restarted after that. But when flashing with System.zip, I have this error

  «MEM: / dev/block/bootdevice/by-name/aboot:...» "contained unexpected."

  E: error in /data/media/System.zip (Status 7)

  Concerning

  It helped me, even though my background was not as easy as mentioned. First thing was to Flash my mobile to S042, then following the above steps.

  The point is if someone gets 101 State or error Status 7 this is because some features of the OTA update does not match the system. So, you need Flash mobile at least once. The process is very simple and takes only 15 minutes.

• learning about the lenovo A6000 OTG support and update of lollypop

  Hello Sir, iam one of the client lenovo, iam using lenovo A6000, officially there are no OTG support for lenovo A6000, but I need the OTG support immediately. I ask that you many want to clarify the procedure for the support of the GTA on my phone. I've also updated my phone several times (about 4 times), but I do not understand. and I also curious that you like when will be updated to lollipop for my phone A6000.

  No support OTG A6000.

  Lollipop for A6000 will be released Q2 2015. Please refer to the URL below.

  https://support.Lenovo.com/GB/en/documents/ht101396

• Updated Lenovo A6000 Lollipop ends abruptly

  I received a notification to update my Lenovo A6000 lollipop [Kraft A6000_S052_150825] which is 995MB. I downloaded and started the installation, but the installation stops on to Midway and the phone restarts and returns to the normal version again! But when I checked the update, it always shows that a new update is available which I already tried to install! Please help me with this!

  Update: I did a factory reset and now it works fine

• After updating the status of error messages 0xc000012f keeps coming back?

  Different messages keep popping up on my hp Windows Mobile 8 after that I got the update downloaded on my computer. Different windows continue to flock to the top of all the system32\uxtheme.dll for example:

  Dropbox.exe - Incorrect Image
  C:\Windows\system32\uxtheme.dll is not designed to run on Windows or it contains an error. Try to install the program by using the original installation media or contact your system administrator or the provider of software for support. 0xc000012f error status

  It is not only Dropbox.exe but also many different products and no matter how many times I press OK on many different programs keep coming he never finishes how I fix this help please.

  Uninstall the KB2879017 update.

  Update of security for IE 10 for Windows 8 x 64 systems.
  If you can not uninstall, restore to a previous point before the update.
  Mark the update as hidden in Windows Update so that it is not up-to-date again.

• 0xc000012f error status keeps popping up after update? (system32\uxtheme.dll)

  The 0xc000012f error keeps popping up on my hp Windows 8 pc after that I downloaded the necessary updates. But I was not updated to Windows 8.1. The same window keeps popping up after I try to leave the window with regard to system32\uxtheme.dll, but for all the different programs. For example: Skype.exe - Bad Image C:\Windows\system32\uxtheme.dll is not designed to run on Windows or it contains an error. Try to install the program by using the original installation media or contact your system administrator or the provider of software for support. 0xc000012f error status. There are countless windows popping up after that I tried to shut it down. In addition, it won't let me run all downloaded programs he says there is an error with. I can't uninstall KB2879017 update because I don't have it. Help, please!

  I was helping someone with this earlier today and uninstall the kb2936068 update fixed it.

  I actually called Microsoft and also read this thread.  A single update of IE seems to cause this and their solution is to refresh the windows.

  I wish that they investigate why this happens and patching rather than just people reinstalling Windows.

• Error message receiver: "Bing toolbar requires you to approve permissions to be fully functional," what cannot update my status or see other statutes to Facebook

  Original title: approval of the Bing Facebook permissions 7 toolbar

  Hello everyone,

  I just bought a laptop Win7 and have been implemented on my Bing toolbar in IE9, after having entered my Facebook login when prompted: Facebook icon I can't update my status or another status view but my profile is showing as connected and I can see a list of the latest photos messages and friend requests.

  Whenever I click on the Facebook icon I get this message "Bing toolbar requires you to approve permissions to be fully functional.  You can disconnect and then connect on the application to approve the necessary permits. "but I don't see where I can do.  Disconnect, then reconnect again, but nothing changes!  I tried clicking on the available link saying 'Bing for Facebook', but after connect you again requested my profile is displayed and that's it!

  The link saying "Bing Bar on Facebook" just open bing.com and the available option just allows me to turn the alerts.  You see, I tried to solve this problem!

  Any help would be really appreciated as I really like the Bing toolbar feature.

  Many thanks in advance,

  Chris

  Hi Chris,

  Since you are facing problems with Bing bar 7 on Facebook, you can post your request in support of Bing for further assistance Forum:

  http://www.bing.com/community/f/

• A6020a46 / 3GB Snapdragon 616-indian OTA update failed (unroot)

  Hey guys, today I check an update for my lenovo Vibe K5 more A6020a46 3 GB variant, I download the update of its 56 MB in size, then restarted to tbrough update flash Recovery but by updating suddenly device rebooted to normal with update failed message, I thought that some problems in school so I factory reset my device and then download and tried , but facing the same error.  I try to manually download the fiemware stock and update complete pc, with the help of lenovo support, choose the model and code hw to custom firmware they provide and who are 1.6 GB in size, but then I start download after loading MEM and xmls he show any failed download is peripheral fyn detected in downloader, but don't start not flash?  Help me please.

  Hey guys got solution for problem of OTA update no matter what version you are and get you the update issue it works for all OTA on Vibe K5 / K5 more.

  Steps: -.
  1. download Lenovo Assistant
  2 connect your device with pc as usb debugging must be on with unlocking OEM is also on
  3 Lenovo Wizard detect your device and the last OTA to your device as well. good download it.
  4. after the download finish it will try to flash your device with the latest OTA but unfortunately it failed with the error. (relax_)
  5. open C:/ProgramFiles/LenovoMobileAssistant/folder on your computer now, go to the plugins folder there u got
  Update.zip, copy it and paste it somewere now extract it.
  6. you got several zip with find country_name.zip 'India.ota.zip' files and 'System.zip' copy this two in your SD camera card.
  7 reboot to recovery and first flash India.ota.zip using inventories, it will automatically restart.
  8. new reboot to recovery and now System.zip flash finally it starts to blink.

  Note:-it will work only and only if you have not installed the CWM/TWRP/Phiz recovery on your device. as TWRP flashed so I can't but after restoring the firmware stock S042 I resolved the number using this way.

  Oh yes m on A6020a46_S056 and the heating problem is resolved almost not at all same heat during a heavy games, did not notice another change log.

• Reliance jio 4G support for lenovo A6000

  I take advantage of 4G of reliance connection, when I insert the Sim Card in slot 1 Lenovo A6000 by setting Jio 4 G present in the network is available, but not connected, pl. give updates for it.

  Hello

  Reliance Jio is supported in lenovo A6000 (Onlly for data - no calls)

  Please follow the steps below and check if the settings are correct or not:

  * Setting--> management SIM--> check for the activation of the SIM.
  * Setting--> mobile network---> select GSM/WCDMA/LTE to the preferred network type.
  * Select the name of the service provider in the name of the Access Point.
  * Close data connection
  * Restart the phone and start a data connection and check.
  Its working for me for Reliance JIO 4 G

• Lenovo P780 system update does not work

  Hi all

  i, m using Lenovo P780 4 GB

  at the present time the OS P780_ROW_S115_130807 worm

  4.2.1 Android

  I try update day but not workin after I download the update I chood update now, it will restart but nothing happen is like restart as usual, the update does not show

  any idea or not can do to update?

  Ok... You are grounded. Have you removed all the apps system? If you have done which causes the failure.
  Did you also change the replenishment of stocks?

  In this case, the best way to go is to factory reset the phone and try again to OTA update. (If you have changed the rebuilding of inventories with a recovery of CWM or TWRP, factory reset will not help). You can also try the smart Wizard after the reset.

  Important: Please ensure that the download and dosent of process (update) install get interrupted!

  Let me know how it goes.

• Update error code: OX80070422

  Hello
  I installed windows 7 three weeks ago and it has worked well and properly. but a few days ago he showed me a massage that was: Update error with code OX80070422. Please tell me how I can fix this problem.
  Thank you, Reza

  Hello Ranigh,

  Thank you for using Microsoft answers Forums.

  Windows Update error 80070422

  If you receive the error Windows Update 80070422 appears when downloading updates, you might need to change the Windows Update service settings, and then restart the service.

  To change or restart the Windows Update service

  You must be logged on as administrator to perform these steps.

  1. open administrative tools by clicking the Start button, then Control Panel. In the search box, type Administrative Tools, and then click Administrative Tools.

  2. double-click on Services.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  3. click on the header of the column name to sort the names in reverse order. Find the Windows Update service, right-click and then click Properties.

  4. under the tab general , next to Startup type, make sure that Automatic is selected.

  5. next to Service status, check whether the service is started. If not, click Start.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  This applies to the error codes:

  ·                 WindowsUpdate_80070422

  ·                 0 x 80070422

  That should solve the problem for you.

  Thank you.

  UDAY $012 please let me know that whether the solution worked or not, I thank you and appreciate your comments. URGO

• Windows Update, error 80200010 # WindowsUpdate_dt000

  The message referenced above is the error in trying to fill three 3 important updates to my computer, I received.  Two 2 updates installed correctly and completely, however, one (1) does not.  In chicking on icon troubleshooting he, I will put this error message "WindowsUpdate_80200010" "WindowsUpdate_dt000"  What does this mean and how can I fix this error and get this update loaded on my computer.

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80200010

  If Windows Update error 80200010 during updates, this means that the Background Intelligent Transfer Service (BITS), cannot access the Internet. This service is used to connect to the Windows website and download updates to your computer.

  To fix this problem, make sure that your computer is connected to the Internet and check for updates again. To easily see if you are connected to the Internet, point to the network icon in the notification area and wait until you can see the status of your connection. You will see the name of your network or the service to which you are connected and the type of connection you have. If you are on a company or home network, you should see the message access: Local and Internet.

  I figured Vista in this case.

  For info: http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/1467f44b-ee27-4f7d-98d7-f1c4b35b3395

  TaurArian [MVP] 2005-2010 - Update Services

• Impossible to verify updates errors updated Code 80072EFD

  In my status bar is the icon for updates are ready well that says mine can not check for updates when I try its control of cant say for updates error Code 80072EFD I tried adding sites to the lists of exceptions and nothing works someone can help me please

  * Title *.
  Please help me

  If the problem persists, try the following steps

  This problem can also occur if the background services adversely affected the process of updating Windows.  Try to install updates in the boot environment to check the result:

  Clean boot
  =======
  This method will help us determine if this issue is caused by a loader program or service.

  Please, perform the following steps:
  1. click on the "Start" button, type "msconfig" in the search bar and press ENTER.
  Note:, please, click on continue if the "User Account Control" window appears.
  2. click on the 'Services' tab, check "Hide all Microsoft Services" and click on 'Disable All' (if it's not gray).
  3. click on the 'Startup' tab, click 'Disable All' and click on 'OK '.
  Then, restart the computer.
  4. check if we can upgrade the system to boot.

  You can check on Normal startup on the general tab to return to the Normal Mode after if this problem is solved.

• Ask about OTG on Lenovo A6000 support more

  Hello

  I want to know if the new Lenovo A6000 launch more (launch on flipkart, 28 April 2015) a OTG, supported or not.

  Kind regards

  Vipin

  Well I just updated some information.

  The A6000 '+' is not supported by the OTG.

  Difference between A6000 vs A6000 + is only A6000 + 2 GB of RAM and 16 GB ROM.

  I hope this helps.

• When I try I get the windows update error number: 0x8024400A

  When I try I get the windows update error number: 0x8024400A

  Hello

  
  This problem is limited to a particular update or all updates? Thanks for mentioning the number of KB.
   
  
  Follow the suggestions below for a possible solution:
   
  Method 1
  I suggest you consult the site mentioned below:
  Temporary connection related errors may occur when you use Windows Update or Microsoft Update
  http://support.microsoft.com/kb/836941.
  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
   
  Method 2
  If the problem is not solve I suggest you try the procedure described in the link mentioned below.
  You cannot install some programs or updates
  http://support.Microsoft.com/kb/822798
  WARNING: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  How to back up and restore the registry in Windows
  http://support.Microsoft.com/kb/322756/
   
  See the link below and follow the steps suggested to DG_963 on July 1, 2012.
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/Windows-Update-error-0x8024400a-on-clean-install/4c79d20d-A4B3-4724-A6D8-4a768559038a
   
  Let us know the status of the issue.