Lenovo K3 Note Blutooth frequently disconnects

Similar Questions

• Satellite S50-B-15N-Wi-Fi frequent disconnections / BSOD

  Hello

  I have a Toshiba Satellite S50-B-15N who suffers frequent disconnections in my home Wi-Fi.

  I updated my drivers intel for the latest on the site of intel, but the problem persists.

  The other day I got a BSOD and it came with this (NETwbw02.sys) DRIVER_IRQL_NOT_LESS_OR_EQUAL Error info. After a little research, there seems to be a conflict any with the access point (router) in my house.

  I also suffer from BSOD on the incidents of the core power.

  Anyone have any suggestions on any of these questions?

  The NETwbw02.sys file seems to belong to the Intel WiFi driver package.
  But usually the Intel driver shouldn't cause big problems... but it might be possible that a different 3rd party software that is installed on the laptop is not working properly under driver Intel...
  So I guess that the notice posted by Liam should help you to solve this...

• Frequent disconnections of WLan on satellite M40X-230

  My laptop undergoes frequent disconnects on the internet and it becomes very annoying. Situation is that the laptop connects wireless to the Internet via a Belkin router. The router works well, and I use Aol for the ISP.
  Our second laptop, also a Toshiba but a satellite A30-203 does not suffer from problems despite using the same router.

  Two laptops have SP2 and the M40 is centrino mobile while the satellite has a card (also Belkin) wireless adapter.

  If I look at the connection speed, it varies between 54 Mbit/s and 1 MB/s and said that the signal strength is excellent regardless of speed. This means that the problem lies in the laptop or its parameters, or must he chipset drivers upgrade?

  Any help would be appreciated as the slow performance especially when loading pages on the net makes me stupid.

  Hello

  You should know that there are different standards of WLan that supports of different properties.
  The standards are 802.11 A, B or G. Currently, the standard 802.11 G wireless supports the fastest connection.
  The best combination is the using the router and wireless network adapter that supports the same standard.

  You suggested that the A30 Satellite using the Belkin WLan adapter. I guess it has better compatibility between router Belkin and Belkin WLan card. As a result, you will get the best performance.

  However, on your satellite, you must check the WLan card properties. There you should find a few options that could increase performance card and connectivity.
  Important: Energy saving Option should be disabled in the properties of the map. Try also to set the WLan range at the highest level.

  In addition it s advisable to check the WLan card driver updates. If you use a map control WLan Intel the Intel page for updates.

• Frequent disconnects on 1 device (several times per hour)

  Hello

  I bought the Amazon N300/WNR2020v2, a month ago. Is the latest firmware (V1.1.0.32_1.0.1). I can't remember if it ever worked right, but I get frequently disconnects. And by frequent I mean several times per hour (up to 10, 20, 30 times per hour). Sometimes my connection will last 30 minutes, sometimes 2 min. I'm a developer and I work from home, so it became completely unworkable. I absolutely can't do anything more than a few minutes without disconnecting.

  Things, I tried, without success:

  -Changing the channel

  -Reduce the MTU 1420

  -Various DNS (8.8.8.8..),

  -Change of speeds 54/150/300

  When the connection drops, it is not just my internet connection, I cannot ping the router either (so I have no internet and no local network).

  I had another router before, and everything worked just fine (ASUS WL-330gE). Unfortunately, I lost it, so I can't come back.

  I must also say that I have a good amount of connected devices (maybe 10), but you know, it's just modern life (printers, computers, phones, dropcams,...).

  Advice? I can't work essentially. It's very frustrating.

  In fact, I talked to my wife after the announcement, and she said that she does not know the question. I tried to leave her computer open watching the Dropcam next to me (if I have something that uses the connection permanently and I can easily monitor), and that she feels no drop, which means that the issue could in fact be my computer (which is weird, because it works very well at work).

  Came across this:
  http://Apple.StackExchange.com/questions/235739/constantly-dropping-Internet-on-El-Capitan/248228

  And it seems that this can be fixed:

  sudo ifconfig down awdl0

  I will update in a bit to see if it really fixed. I've seen the issue on my phone too, so I'm not sure that this, it is 100%. We'll see.

• Frequent disconnects between cRIO-9024 and host computer

  Hi all

  I had a brand new cRiO OR 9024 and several modules of recording data a few days ago. I have setup the IP address for the cRIO which is 10.0.0.2 and the subnet mask is 255.255.0.0, which is the same with what I've done for the host (different IP address). I installed the software that I need on the controller RT. Throughout the process, I have disabled the firewall. I use MAX 5.0 and NEITHER cRIO 4.0. Two of them are the latest version. I built the link between the cRIO and my computer successfully. However, the target is always disconnected from the host computer, even if I do not have action on the cRIO, that is. Without running any software on it. Status of the disconnection is achieved since the MAX, but surprisingly, I can ping through the IP address of the cRIO. It seems to me that the connection between the host computer and the cRIO was established.

  I tried to run code on the target, but unfortunately, the disconnection also occurs frequently simple. I checked the CPU target and the use of memory, which are low. So I concluded that the disconnection is not generated by the high utilization of the processor or memory.

  I also tried to reformat the cRIO and reinstall all software, but it has no effect.

  I also found that a warning appears regularly on MAX interface that "there was a problem to retrieve the settings of the target. For more information, go to ni.com/frinfo and enter the Info Code MAXServerUnkownError. If the problem persists, contact National Instruments'. I checked MAXServerUnkownError of

  NI.com and followed the instructions to make sure that there is no bad configuration on my computer as a firewall etc. However, without doing wrong was found.

  Can someone help me figure out what is the problem?

  Concerning

  Japanese

  Hello Japanese,

  Thank you for answering my questions. I have more questions that should lead to a solution to your problems:

  1 is the add-on NO-time installed on the cRIO?

  2. are you able to disable the antivirus on your computer?

  The add-on NO-time turns out to cause frequent disconnects with cRIOs in LabVIEW 2011. To view the add-on, you will need to right click on software under the cRIO, select Add/Remove Programsand select the option custom software installation . If it is installed, I recommend to remove this add-on the cRIO to help solve disconnects.

  Please let me know if disconnects continue after removing NO-time and disabling the antivirus.

  Kind regards

  Andrew Brown

• the volume on my laptop lenovo does not work

  the volume on my laptop lenovo does not work, I ran the troubleshooting but he days my driver does not work properly, I have uninstalled/reinstalled but still have the same issue - no volume. everything I've tried has not worked. I can't put the volume up and down but always the same volume no matter what I try! Could someone please!

  Hello

  1. you receive an error message?

  2 did you change on your computer before this problem?

  3. what operating system is installed on your computer?

  What version of the operating system Windows am I running?

  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  Follow the suggestions and see if it helps.

  Method 1

  You can follow the steps and see if it helps.

  (a) right click on the Volume icon in the Notification area.

  b) click on tab reading.

  (c) right click on the box empty.

  d) select Show disabled devices.

  e) right click speakers and select allow.

  f) right click on speakers and go to the Properties.

  g) select use this device from the use of the device.

  h) click apply and OK.

  Method 2

  If it was working fine before, you can restore the computer settings to a date where he worked very well earlier.

  System restore

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  See also:

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Sound cards: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/sound-cards-frequently-asked-questions

  Tips for solving common audio problems

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

• SSL VPN Portal Page - frequent disconnects

  Hi all

  I've implemented two firewalls to two DCs - London and Swindon. Now, I'm traffic to these two firewalls by using a URL to load balancing. When users try to connect to the URL (which indeed resolves to the IP address of the two firewalls Internet oriented interface), they faced frequent disconnects. The portal will be open for a few minutes, and as they are by clicking on the bookmarks on the page they get automatically disconnected. It is completely random and there is no model it.

  However, I wrote the following:

  1 if I clear my cache and Temp files and then try to access to the portal by using the URL, it works fine for a little longer (maybe 15-20 minutes) and then the same disconnect start all over again

  2. If I try to access all the IP addresses of the firewall (do not use Uruguay Round), it seems to work fine.

  Can someone let me know what could be causing the problem?

  Thank you!

  Hey riri,.

  You can check the activation of the ASA connects and debugs, a 'see the connection' and ' debug webvpn 255 "will be useful to check if the SAA is disconnect the session.»

  Alternative, you can run wireshark on a computer and make sure the IP reset is coming,

  See you soon,.

  -Randy-

• Lenovo K3 Note: Lenovo Launcher Stopped Working

  Hi all

  My phone is Lenovo K3 Note K50a40 Indian version. I bought almost 20 days ago. The last 3 days, I have problem lenovo Launcher stopped . Launcher to work again, I erase settings lenovo Launcher, but it only works for 1 day. I also have FACTORY RESET the device settings but, once again, lenovo launcher stopped jumped message. What will I do to get rid of what I can't use this unit without erasing everyday data Launcher?

  Any help would be appreciated.

  Thanks in advance.

  
  

• Lenovo k4 note question "preventing the unnecessary Touch."

  Most of the time when I try to unlock my phone, a screen pops up that useless tactile watch almost every time to prevent. It is very irritating. Why it happens and y at - there a way to remove this problem?

  I am a user of Lenovo k4 note. I thought you have the mode of preventing access to the Pocket. To turn it off

  Go to-online settings-online-online Pocket-dial prevention mode lock screen - disable.

• Lenovo k3 note wallpaper becomes black

  My lenovo k3 note when put in Pocket & after that some time wallpaper becomes black and after 1-2 minutes, he returned... Anyone has this problem, is this a software problem?

  I think that this happens when I selected the option smart brightness...
  Settings-> display-> display-> smart brightness color balance
  Once I turn it off... Wallpaper seems to be fine...

  Maybe there is a bug in this environment or when the direct light from the Sun falls he is expected to do...
  Check it out...

• Lenovo K3 Note: Blocked history do not open after update Android 6.0

  I have Lenovo K3 Note (the India Version), a few days ago, I upgraded my phone to Android 6 and now I am unable to open blocked history. Please let me know what is the problem with him and how to solve. Thank you.

  Problem solved. Goto settings > Apps > all apps > Business Contact Manager > storage > clear data and clear the Cache.

  Be sure to bring them back to the top of your contacts and block Contacts before proceeding.

• Lenovo K3 notes App Lock does not

  Lenovo K3 notes App Lock does not work after update from 85 MB

  There isn't that one solution to the problem of blocking app first install app https://play.google.com/store/apps/details?id=com.domobile.applock or https://play.google.com/store/apps/details?id=com.thinkyeah.smartlockfree first go to setting - security - administrator of the device after that click on the option audit and that yet once back in the Security tab option applications with access to the use , click the button for the installed locking software app now check your phone two software work well some lenevo k3 phones also support https://play.google.com/store/apps/details?id=com.sp.protector.free&hl=en this request, so go ahead and enjoy with lenovo k3 updatessssssssssssssss

• My Lenovo laptop not turn off or do anything I told him to do.

  My Lenovo laptop not turn off or do anything when I hit restart, stop, sleep, switch user, log off, lock or Hibernate. I can not even use the keys CTRL + ATL + DELETE the order and I have no idea what to do. and I already uninstalled Norton due to previous questions posted here.

  Hi DylanCole72,

  ·         Did you do changes on the computer before the show?

  ·         You get the error message?

  ·         Which model of the laptop?

  Follow the steps in the article.

  You cannot log off, restart or shut down your Windows XP-based computer

  Advanced Troubleshooting for shutdown problems in Windows XP

• Lenovo 3000 N100 Blutooth does not

  I bought the Lenovo 3000 N100 0768 GZQ computer laptop model in 2007.Recently one day, I found that the Bluetooth icon in the task bar is showing the Red sign. When I'm clicking "my places Bluetooth" a pop-up message showimg "Bluetooth device not found. Check that your Bluetooth device is properly connected and turned on". I tried Fn + F5 to activate bluetooth. Did not work. Then I uninstalled the Lenovo Bluetooth with Enhanced Data Rate software and still freshly installed. But no improvement. How to solve this problem of Bluetooth network? Help guys.

  Have you checked if the switch to turn on the radio is on? In your model, I think it is in the front of the laptop below the touchpad.

• Frequent disconnects WRT400N and now even not visible connection

  We bought this router in search of speed and the ability to have 2.4 and 5gh at the same time. Have 5 connected laptops but only 2-3, used both. 2 dell, 1 Toshiba and vaio 1. Once I installed, it took an hour to get the internet to be recognized and wireless to work. Since then, every time I put the computer to sleep or shut down the internet disconnects. Reconnection is usually fast, maybe 5-10 seconds. However yesterday we began to experience the internet connection drops all together and the connection/router being even unrecognized option Wireless in the section network and sharing Windows 7. I've never seen where you can't even click on the link to diagnose etc. This morning there was still no connectivity. I have rebooted the modem DSL (Brighthouse Cable), rebooted and rest the router of many times. Internet could show back for a few seconds and then slide again. I am two seconds away from return this puppy as this was only a few days since we got it. Any ideas or help would be greatly appreciated.

  Connect to your router configuration page and below change the MTU to 1350 and click on save settings, then under the wireless tab, change the channel to 1 or 11 wireless and click on save settings. Now again try to connect to your wireless network.