Lenvo M81 Displayport does not work

Similar Questions

• DisplayPort does not work in Windows 7

  HP ProBook 6545b

  Display port does not work in WIndows 7.  There are several devices in Device Manager that have no drivers, but Windows in unable to find a driver for them.  I downloaded almost all the drivers on the HP website for the laptop and install.  The Device Manager has 1 unknown device and 2 Base system devices that have no drivers.

  Display port worked fine when I had Windows XP on the laptop.  Win7 installation is a new facility on a wiped driver, is not the upgrade.

  Thank you

  cbabfat

  Hello:

  What bit to W7 version do you use?  32 or 64?

  This driver must take care of the Base system device.

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=4021366&prodNameId=4021367&swEnvOID=4053&swLang=13&mode=2&taskId=135&swItem=ob-79991-1

  For other missing devices, please click in the Device Manager. Then click on the Details tab. In the property drop-down list, select the second element (Hardware ID).

  After the first string you see here. Those who will be to further identify the device and I can send you the link for the drivers.

  Paul

• HP Z400, nvidia quadro 4000, main monitor connected on DisplayPort does not work

  Hello

  My first (primary) display is connected through an adapter displayport to DVI adapter (HP P/n: 481409-002 HP [email protected]).

  Now when I turn on the PC, the monitor gets no signal.

  I also wrote a message to HP support, but I don't have an answer.

  Support-ticket-no: #71940913 # and #72360491 #.

  Things, I try to solve the problem:

  • another adapter connected --> without success
    
  • connected to another cable DVI --> without success
    
  • Monitor connected to the other graphics card DisplayPort --> without success
    
  • different versions of pilot / installed (certified by HP for Workstation Z400, later Nvidia SolidWorks) --> without success
    
  • A monitor with display port without adapter plugged into the graphics card display port--> it works
    
  • Another monitor with DVI adapter and connected to the DisplayPort --> without success
  • Graphics card on the other slot (bottom) inserted PCIe --> without success
  • Monitor isolated more than a minute of the grid --> without success
  • In Windows 7 (Win and P - key key) the advanced value --> without success
  • Update BIOS to v3.57

  Now I do not continue and write a post here, with the hope of help.

  System:

  • HP Z400 workstation
  • nVidia Quadro 4000 (driverversion 311.66)
  • Windows 7 Pro 64-bit

  Now I need help from you.

  Maybe, we also had such a "phenomenon".

  Thank you!

  Greetings Marco

  Hello

  I wanted to just let know you that the problem has been resolved with the support.

  They sent a new adapter and it worked.
  This is the same adapter as described above.

  Could not believe it yet, but I'm glad that it finally works again

• Mini Displayport does not not on the new Best Buy Yoga 14 (Yoga 460)

  Yesterday, I bought one of the brand new 14 Yoga from Best Buy, the one with the stylus, which is basically a 460 yoga.

  Mini Displayport does not work. Hook up a monitor makes the system to hang for about 15 seconds, and no screen is detected.

  All Windows and Lenovo software are up to date.

  I use a Mini DP--> HDMI adapter, but I've never had problems with it on other computers.

  I have ordered another cable converter and will try that tomorrow.

  Lenovo is aware of this problem? Is there a solution?

  
  

• Thunderbolt 10 Windows display does not work

  Hello

  I'm trying to implement the following configuration:

  I have 2 Macs:

  • Mac Mini (late 2014, 2.6 GHz Intel Core i5;) Intel Iris 5100 1536 MB) with Windows 10 (Home) installed through Boot Camp
  • 27 "iMac (late 2013; 3.5 GHz Intel Core i7;) NVIDIA GeForce GTX 780 M 4 GB) installed with OS X El Capitan

  I want to use the iMac as a display for the Mac mini, but it seems that thunderbolt display does not work (I can not upgrade to Windows 10 by pressing Cmd + F2)

  Could you please help to solve this problem?

  Kind regards

  Dmitry

  Please see use of your iMac as a display with the target - Apple Support Display Mode and Thunderbolt Firmware Update 1.2: continues to reappear and ports Thunderbolt and the target Display Mode may not work - Apple Su... .

  If command-F2 does not work

  If your iMac won't go to the target Display Mode when you press Control-F2, check these things:

  • Make sure the iMac that you try to use it as a screen that supports target Display Mode.
  • Make sure you are pressing Control-F2 on the keyboard which is connected to the iMac to use as a screen.
  • In the keyboard system preferences, if the check box is enabled to use all F1, F2, keys etc. as standard features, changes of command-Fn-F2 key combination.
  • Make sure that your Mini DisplayPort or Thunderbolt cable is connected to both computers.
  • If you are currently connected to the iMac, you want to use as a screen, try to connect to return to the login window. Then again press Control-F2.
  • Some old keyboards Apple and third-party keyboards allow may not control-F2 to toggle display modes. In this case, use the keyboard that came with your iMac to activate / deactivate the target Display Mode.
  • If your iMac is currently started in Windows, it will not be in target display mode. Target display mode is not supported in Boot Camp.

• Venue 11 7140 pro micro HDMI does not work after upgrade windows 10

  Has anyone tried connect a HDMI microphone on their place of dell 11 7140 pro after windows 10 upgrade? Mine does not work after the upgrade, but the HDMI from the dock works.

  I have thus display driver problems on 10 to win.

  For me, the micro HDMI port works fine. I use an active adapter, so that could make a difference.

  The HDMI on the dock works well, but only if I directly connect to an HDMI display. If I try to use a passive DVI adapter, then the external screen is not recognized. In addition, the DisplayPort on the wharf is also unnecessary, regardless of the type of cable or attached monitor.

  I encounter this problem after performing a new installation of Win 10, using the brand Dell drivers and latest drivers Intel installed by Windows update.

  It is certainly a driver problem Win 10 because everything works fine if I boot the Tablet under Linux using a USB key.

• 3007WFP-HC does not work above 1280 x 800

  I'm putting in place two of these monitors but cannot get above resolution 1280 x 800. When I go to set my screen resolution, I have the opportunity to go up to 2560 x 1600, but when I select anything above 1280 x 800, monitors just flash of color bars.

  I use a NVidia NVS 310, two DisplayPort / Dual-Link DVI-D adaptersand two cables Dual - Link DVI - D (Dell NG032 to be exact). I installed the driver for the monitor (R222148). And verified that I have the latest driver for my video card is installed.

  Out of curiosity, I tried to use a DVI Single-Link cable and my screen resolution options changed so they maxed out at 1280 x 800. In addition, another strange thing is that, despite the possibility of going up to 2560 x 1600, the "recommended" tag is 1280 x 800.

  * The only resolutions supported by this nine year old monitor is 1280 x 800 or 2560 x 1600
  * Computer and/or video card with a DisplayPort on or Mini-DisplayPort will do only 1280 x 800, using any combination of wiring for the DVI converter 3007WFP-HC-D DL in the port
  * All HDCP content do it 1280 x 800
  * For 2560 x 1600, computer and/or video cards on the port and the cable should be DL DVI - D

  Even if the NVS 310 supports the conversion of DP adapter DVI - D DL, the 3007WFP-HC does not work. You need to remove the NVS 310 and install a video card with DVI - D DL dual output port.

• Safari does not work after installing macOS Sierra

  Safari and apple store does not work after installing macOS Sierra

  Alas, my crystal ball is in the shop for cleaning, so you will need to provide more details on what "doesn't work" and above all error messages. First of all, let's start the App Store. Provide as much information as possible for those of us who do not sit on your shoulder.

• My iPad Apple 3rd generation wifi + his cell phone does not work

  MY 3rd generation Apple iPad, wifi + cell

  model number MD408LL/a

  Serial number DM * VGL

  THE SOUND DOES NOT WORK

  < personal information under the direction of the host >

  All sounds, or simply notification and sounds apps (for example do music and videos app still have sound)? If notifications and apps you have notifications on mute: on the iPad side switch - Apple Support ? If the sounds in all applications which have tried for example soft-reset/reboot of the iPad, insert/remove the headphones?

• After recent, iPhone, 6, update, Windows, Explorer, does not work, see, iPhone

  I installed the latest update required for my iphone ios 6 a few days ago, and now when I try to download pictures from my iphone to my PC (via USB connection), the PC does not see the iphone.   iTunes sees it yet, but windows Explorer does not work.  It seems that some setting has been broken through the update of ios.  A way to solve this problem?

  Restart the computer and the iPhone. Unlock the iPhone before connecting it to the computer. Any change?

  TT2

• Open the link behind Mail does not work

  Sierra using my link opened behind Mail does not work. The link opens on the top of the window.

  This option works for me in Sierra... is working for you with your previous version of the OS?

• iPhone 5 home button does not work after ios 10

  My 5 Iphone Home button does not work after update final IOS version of 10.

  The home button works on the first push to wake the phone but it will not open the phone the second button.

  I activated the assist button, which does not work either. But what I discover is if I open device for assistance then touch and lock screen click on the button home will work once to open the phone. If I open any app I can't close it unless I go through the same routine.

  You attempted to restart your phone?

  You can do so by holding the sleep/wake button and the Home button simultaneously until the Apple logo appears

• Do not disturb (on request) does not work

  I have an iPhone 7 more with iOS 10.0.2. I had set up as NEW when I got it. I use the function do not disturb I SLEEP every night to block the incoming notifications apps and emails (including work with the application Outlook email). I leave the phone won't cut not so I can make sure my alarm wakes me up the morning. But it does not work. I still wake up emails and notifications of the app. It worked on my old iPhone with iOS 6, 8, 9 or even 10.

  I see a lot of old messages and questions about DND not work, but they were more specific to older phones and ' iOS.

  Anyone else having this problem?

  Any ideas for help?

  Thank you.

  I'm sure that I understood this.

  I had "only when locked" checked and not 'always' in settings do not disturb.

  I leave my iPhone unlocked all night using the bedside table Central app as my alarm clock.

  There we go.

• Contact ID does not work after update iOS10.0.2

  http://www.Macworld.co.UK/how-to/iosapps/iOS-10-troubleshooting-tips-3646690/

  Troubleshooting iOS 10 tips: Touch ID does not work

  Some users have reported that a previously happy Touch ID installation stopped working when they made the update to iOS 10. It is a pain, but rescuable - you will probably need erase your fingerprints and re-enter.

  First, however, try something simpler: go to settings > Touch ID & password, enter your password, then press the buttons next to pay Apple and iTunes and App Store so that they become white. Turn off your iPhone and turn it off again, then go back to settings and turn the two knobs back to green (you will need to enter your password Apple ID).

  Who fixed the problem?  I haven my Aff!

  If not, go through the fingerprint stored in settings > Touch ID & password - press each of them in turn - then erase fingerprints. Then go back and press Add A digital footprint and put back them in. It's a bit complicated, but it should fix the problem.

  I did all that, but the problem could not be solved.

  Try the following steps:

  1. go in the settings, press button ID & password, enter your password. Then turn off iTunes and App Store. Restart your iPhone or iPad. Return to Touch ID and password in the settings and re - turn on iTunes and App Store. Press Add a fingerprint to add another print.

  2 remove and re-add fingerprints: settings > Touch ID & password > enter your device code > scroll to find fingerprints fingerprints. Press the fingerprint, that you want to remove, and then press DELETE.

  3. restart your iPhone by pressing and hold the Sleep/Wake and home.

• Projector does not work after upgrade from Sierra

  My projector does not work after upgrade to Sierra. Or search in Outlook (I use outlook for Mac due to having MS 365 for labour) or the search function in the finder. I use this all the time and need this feature back. I tried to reindex spotlight and nothing. Anyone has any ideas.

  Try to rebuild Spotlight rebuild the Spotlight to your Mac - Apple Support index