Level of privilege of the ACS and sets of commands

Similar Questions

• Development of pilots WEC2013 SDHC - what are the registry and setting of the catalog

  Development of pilots WEC2013 SDHC - what are the registry and setting of the catalog

  We are the WEC2013 portage for a controller ARM. The operating system works very well.
  We have made our development using SYSGEN_FSREGRAM and SYSGEN_FSRAMROM.
  We are now developing driver SD card. We have helped in SYSGEN_SD_MEMORY, SYSGEN_SDBUS, SYSGEN_SDHC_STANDARD, and FAT in the catalog items for SD card.

  We did our sdhc.dll to our platform.

  We get the following error,

  PID:00400002 TID:004 B 0006 + SHC_IOControl (0xa5838f80, 0x00071c24, 0 x 00000000, 0, 0xac67fc70, 16, 0xac67f928)
  PID:00400002 TID:004 B 0006-SHC_IOControl(rc = 0)
  PID:00400002 TID:004 B 0006 FSDMGR! MountStore: Failed to open store "SHC1;: error = 31

  Can we do something else?

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• authentication between the ACS and AD

  Hello

  I would like to know what kind of authentication mechanism ACS 5.1 use to speak with Active Directory. Does simply use MSCHAP, MSCHAPv2 or PAP. By default, it uses PAP to talk between the Cisco IOS and the AEC on the 5.1.

  If you llook at the default admin tab and click on allowed protocols---> he mentions PAP.

  Should I use a safe means of transport between the ACS and AD. IDF, so anyone can say the authentication mechanism?

  Thank you

  Any meeting of directors like telnet, ssh and comfort they always use PAP as an authentication method.

  Although communication pap can be captured and read in this case in clear text. However, since we have Ganymede in use, he always encrypt the whole package with shared secret defined on the IOS and ACS/GANYMEDE so if you capture traffic between the radius and the device you won't be able to decipher it without the key.

  In case you have Ray then using SSH (Putty) so that it can help you for a safe communication.

  ACS and AD support PAP, CHAP, MSCHAPv1 and MSCHAPv2.

  However, the administration does not work on another method of authentication except PAP.

  HTH

  Regds,

  Jousset

  Note the useful posts ~

• How to add a Gadget in Windows 7 to display AN image on the desktop and set its size

  The slide show in Windows 7 Gadget displays the images to a predefined size.
  I want to increase the size of this form, if possible.
  If this is not possible, how can I do (add) a Gadget to display a picture on the desktop and set its size.
  Thank you in anticipation of some tips.

  Click with the right button on the desktop background and select Customize,

  Click the downstairs desktop background link on the left

  

  Another thing would be edited / Resized in a photo editing program at least the size in pixels of your monitor.

  Right-click on your desktop, and then select the screen for your recommended resolution setting resolution / pixel dimensions.

• When you try to download a PDF file to an interactive site, I get the announcement: "the attached PDF file is referring to a non-embedded font Tahoma. Please delete, incorporate the police and set again. "How to integrate it, or in fact any other font?

  When you try to download a PDF file to an interactive site, I get the announcement: "the attached PDF file is referring to a non-embedded font Tahoma. Please delete, incorporate the police and set again. »

  I couldn't get rid of the Tahoma police in the WORD file.

  How to integrate it, or in fact any other police?

  It should be an option to make the PDF.  Which version of Acrobat you are using, and exactly the method and parameters do you use to make the PDF?

• How centering the legend and set its display property to block in Dreamweaver cc?

  I am a newbie to Dreamweaver and articles http://www.Adobe.com/content/dotcom/en/DevNet/Dreamweaver/article-index.html by David powers has been very useful for me.

  I followed all the instructions which he describes and wow, I am happy with myself. However, at the present time, I am on article: http://www.adobe.com/devnet/dreamweaver/articles/first_website_pt3.html, but I'm stuck on the subtopic:

  Hair images with captions.

  Up to now, my question is: How do I Center the legend and set its display property to block in Dreamweaver cc?

  Please forgive me if this question seems so childish!

  Thank you for your assistance expected!

  Sincerely,

  Newbie

  If you look in the css file over to the figcaption css selector you will see:

  figcaption {}

  display: block;

  text-align: center;

  make-weight: bold;

  do-size: 14px;

  }

  As I don't use DW css Panel, I can't tell you how to do that through that, BUT doing it manually just open the file main.css figcaption roller and the type it as shown above.

• 5.3 of the ACS and Enterasys A2 switch support

  Hi experts,

  I use ACS 5.3.I need to do macauthentication on Enterasys switch with Cisco ACS 5.3.I the following error get;

  Error analysis or an event of unknown type: xxxxxxxxxxxxx ERROR RADIUS: RADIUS packet contains invalid attributes. A failed - request Attepmt:Radius dropped

  How can I integrate Custom attribute A2 Enterasys switch with Cisco ACS 5.3?

  Thank you.

  I think you need to do is to define the attributes of the seller for this device

  Can be done as follows:

  Go to System Administration > Configuration > dictionaries > protocols > RADIUS > RADIUS VSA

  can set the new seller of the RAY by pressing 'create '. Vendor ID is the ID assigned. Prefix of the attribute allows you to assign a standard prefix to all the attributes of this provider. All RADIUS attributes names must be unique across all providers

  Once having set the RADIUS vendor can select from the list and press 'display the attributes of the seller '. Can now set the attributes of this provider. This option is also available from the navigation on the left to choose the name of the seller.

  Note that the Remove of the attributes of the seller takes a bit of time (a few seconds) and so are not disturbed

• 5.2 of the ACS and Cisco ACE RBAC does not...

  Would be grateful for help here if it can be provided.

  I am configuring GANYMEDE auth for a Cisco ACE through our 5.2 ACS server. I think that I installed everything correctly but when I connect with my GANYMEDE account it gives me only monitor network privileges.

  This is the Configuration of ACE, I use:

  XXXXXXXX, host 1.1.1.1 key radius-server

  XXXXXXXX, host 2.2.2.2 key radius-server

  RADIUS-server timeout 10

  RADIUS-server deadtime 30

  !

  AAA group Ganymede Server + ACS

  Server 1.1.1.1

  2.2.2.2 Server

  output

  !

  AAA authentication login default group local ACS

  AAA authentication login console Group local ACS

  Default accounting AAA group ACS

  !

  This is the Configuration of the ACS:

  

  When I connect to the ACE I see authenticating and pulling the right group of the ACS journal:

  Connected to the ACS status details user peripheral name server device name group Service identity store identity network access group

  Apr 8:57:40.566 30.13 AM xxxckxxx

  AFA-ACE-internal

  Device Type: all device Types: load balance devices, network, location: Cameron Enterprises: Oklahoma: Data Center - 1 unit Access.TACACS

  AD1 all groups: administrator - full HAPP-CSACS

  Apr 8:52:20.256 30.13 AM xxxckxxx

  AFA-ACE-internal

  Device Type: all device Types: load balance devices, network, location: Cameron Enterprises: Oklahoma: Data Center - 1 unit Access.TACACS

  AD1 all groups: administrator - full xxx movies

  Apr 8:43:43.276 30.13 AM xxxckxxx

  AFA-ACE-internal

  Device Type: all device Types: load balance devices, network, location: Cameron Enterprises: Oklahoma: Data Center - 1 unit Access.TACACS

  AD1 all groups: administrator - full xxx movies

  But when I log in AS and do a show users that I get:

  * xxxckxxx Dev_VC pts/2 Apr 30 09:57 (x.x.x.x) monitor-network-default domain

  I've searched for days to find a solution for this with no luck. Any help would be greatly appreciated.

  Thank you.

  Well, it should work effectively at the same time.

  Could you please check the GANYMEDE of ACS logs and check the newspaper correct PROFILE of SHELL (Shell Administrator profile-material) are selected.

  This can be checked by virtue:

  Monitoring & reports >

  Reports >

  Catalog >

  AAA Protocol > authorization Ganymede

  They provide an output of

  Field of Show running-config

  Would appreciate if you can share the result here.

  Jatin kone

  -Does the rate of useful messages-

• How can I copy the list of names of files in the finder and set the Clipboard filenames separated by commas?

  Hi guys, I was wonder if anyone can give me a hand with a script.

  I need to be able to paste a list of file names of the files as follows:

  0001.jpg 0002.jpg 0003.jpg 0004.jpg

  At the moment, if I select the files in the Finder, copy to the Clipboard and paste them in TextEdit, they are like this:

  0001.jpg

  0002.jpg

  0003.jpg

  0004.jpg

  I found a similar but slightly different script and I don't know how to change it. Here it is:

  Define extension_list to {"jpg", "" JPG","jpeg","JPEG"}

  the value cbNames (Clipboard text) paragraphs

  Set csvNames to {}

  the tid value delimiters to point to the text of the AppleScript

  the text value of the AppleScript point delimiters ".»

  -now, make a list of names without extensions

  Repeat with the names in cbNames

  If the point 2 of the text names is extension_list then

  copy of text 1 of names at the end of csvNames

  end if

  end repeat

  Journal csvNames

  -now the filenames as comma CONCATENATE string separated

  the text value of the point delimiters AppleScript «»

  csvNames value cross-as text

  the text value of the point AppleScript delimiters tid

  There is an easier way. Open a TextEdit document and paste the list in. Place the cursor at the end of the first item and drag it to the start of the second.

  

  Press on + command + c to copy and then command + f to bring up find it. Press command + v (do not click in the first search field). Check the 'Replace' box, click in the field replace, and then type a comma and a space.

  

  Click 'All' and then 'done '.

  

• FS autohide toolbars does not, to hide the toolbars on the value and set to true, help browser.fullscreen.autohide?

  Basically, I guess when you go full screen mode, tabs and the search bar should hide automatically until I move my mouse to the top of the screen to the right? Well, this does not happen despite try the suggestions on other threads for example right click on an empty space next to the tabs and hide toolbars check (already verified on) and goes up to about: config and check browser.fullscreen.autohide is set to true.

  However, I have two other options which I think might be a clue as to the problem. There is an extensions.browser.fullscreen.autohide that is set to TRUE and extensions.fullscreen.noautohide set to FALSE.

  Is there an extension or add-on I could interfere? I have installed... session maybe Manager what could be?

  On the Mac screen mode works differently.

  You can try this extension.

  • Old Lion full screen: https://addons.mozilla.org/firefox/addon/old-lion-fullscreen/

• 4.1 of the ACS and 802. 1 x dynamic assignment of VLANS

  Hi guys,.

  a customer wants to implement assignment of VLANs with 802 dynamics. 1 x. The customer has the following facilities, Cisco ACS 4.1 for Windows, Cisco ASA 5540, CSA 5.2 with CSA MC, several routers and Cisco switches.

  Now, the questations are, we can implement assignment of vlan dynamic without a unit of the ANC and the customer also wants to decide between customers with real antivirus signatures and the old signatures. Older clients are denied access to the anti-virus server and the update of the signature and if everything is ok, to have access to the internal network.

  How could implement us this without a new hardware or software?

  Any ideas? Thanks for help.

  René

  You can have a look on the frame of the NAC system. If you want only the posture validate cable customers then there no extra components to buy. If you want to go wireless, you will likely need to buy a Cisco client that supports wireless. You can get the configuration from here guide:

  http://www.Cisco.com/application/PDF/en/us/guest/NetSol/ns617/c649/cdccont_0900aecd8040bbd8.PDF

  I suggest you prototype and see what you think, the good thing is that you can deploy on a per switchport basis so you can make the installer on ACS without disturbing what is there already and apply it by configuring the switch.

• 4.1 of the ACS and Windows AD authentication

  Hi all

  I want to install an ACS, 1113 and will authenticate users through AD.

  It is preferable to install the remote agent on a domain controller or a member server? What are the Pro and cons

  Thank you

  Randall

  Randall,

  You can install it on the DC and the Member Server. My suggestion would be to install on a member for this domain controller server use its resources for activities in the field.

  Kind regards

  ~ JG

  Note the useful messages

• 4.2 of the ACS and Kaspersky antivirus

  Hi all

  I want to install Kaspersky Anti-virus on ACS version 4.2 with windows 2000.

  It is aplicable or not?

  Thanks in advance,

  Ayman Yehia

  Hi Ayman,

  As a general rule of thumb, there should be no limitation to install Kaspersky on Windows 2000 with ACS 4.2.

  In the past, we have seen problems with some anitviruses, such as Norton, for example, block the ACS services.

  Unfortunately, the AVs and releases are too different between them to build a specific compatibility matrix.

  As said, nothing should prevent ACS 4.2 to work when Kaspersky is installed, as long as Kaspersky does not block specific ports/services.

  Kind regards

  Fede

  --

  If this helps you or answers to your question if it you please mark it as 'responded' or write it down, if other users can easily find it.

• 802. 1 x with the ACS and Windows AD

  Hello

  Im trying to configure 802. 1 x with ACS 5.2 but I am wrong as his very differnet ACS 4.2.

  I installed the ACS for the field and think that I installed the external Idnetity store, however when I try to authenticate a pc using probable authentication "PEAP (EAP-MSCHAPv2), I get a reason for failure 22056 object was not found in the store there is identity.

  Marco

  Hi Marco,.

  I guess you missed a mapping configuration in the Section of access policy.

  Create an Access Service name AS-802. 1 x select user select the Service Type, and select network access. Select the identity of political Structure and authorization. Select PEAP as the authorized Protocol. Click on finish

  You will see the new service click on identity.

  Select the source of the identity you have created, then save.

  Click permission

  Select an access permission by default authorization rule and save.

  Create a Service access rule name 802. 1 x

  Select the Protocol Radius as a Condition and as a compound Condition select RADIUS - IETF:Service - Type match box, then select the service that you created before.

  then you can try again.

  concerning

  Alex

• How to manage the getter and setter in flex?

  I want to create getter and setter for a shared variable ways. How to create aid may be related?

  and how to call the accessor get and Set of a class of model?

  for ex:

  (1) in the IDMLEditor.mxml file

  [Bindable] public var currentDoc:IdmlDocument = null;

  private var _currentDoc:String;

  [Bindable]

  public function get currentDoc (): {IdmlDocument}

  return currentDoc;

  }

  public function set currentDoc (idmlDoc:IdmlDocument) {}

  this.currentDoc = idmlDoc;

  }

  (2) how to get from EditorModel.as?

  public class {EditorModel}

  [Bindable] public var currentDoc:IdmlDocument = null;

  You don't need to use underscore (_) to access the variable in the getter, setter class. You can immediately access the variable by using the name of the method

  myClass.currentDoc

  That's all