Libretto W100 - 10 d - the SMS utility on the application of 3G Wireless Manager
Hi all Toshiba personnel
I am very surprised check the new program of the 3G version and the usefulness of SMS specific because there are twoo week I downloaded the new version of 3G application and I found a problem on my PC on the features of this application, I can't send SMS because the system Windows 7 detects an error when inizialize this procedure.
This situation is very curious because when I started to use this program all has worked correctly, and then abruptly stopped with error message which informs me that this program does not work because occurs an operating system error.
I ' would like to know if there is any problem with new version SW 3 G with any particular model Toshiba Libretto W100 10 D as if I can uninstall new version and install the old version that I had never any problems.
Thank you very much
Thus, long you don t have any problems with the old version using old.
As you know booklet is produced exotic and I n t think a lot of people have but let's see if anyone else has noticed the same problem.
Tags: Toshiba
Similar Questions
-
I have this problem on 3 computers just updated with FF 5.0. When I close FF, the application "Firefox.exe * 32" remains in memory. Trying to open FF later greets me with the error that FF can't open because another instance of FF is already running. Previous versions is completely discharged and has never caused this problem...
You can check your add on for compatibility, there may be conflicts.
For now, you can use the command "End task" in the Task Manager to close Firefox before opening another version.
-
Can libretto W100 - I use the page GPU Intel driver?
Firefox application driver Intel HD Graphics at least 8.15.10.2202 activate direct2d, webgl and speed up windows.
The current version of toshiba's 8.15.10.2189.
Intel offers new versions. Can I download them and install them or I do wrong to my w100?
Hello
I m not W100 owner but I have another laptop Toshiba (U400) which is equipped with an Intel graphics chip. I downloaded and installed the driver of graphics card in the Intel page. So far everything runs smoothly
But I've read here in the forum that the use of non-Toshiba drivers graphics is an own risk -
Discover the folio directly in the application with a wireless conection
Hi, people
I have an iPad and a Mac. When I connect the iPad to Mac in order to get an overview of the folio or an article given in the iPad, I have not "Preview in Gustavo iPad" option in my folio builder or overlays of folio. I am a subscriber of cloud to CS6.
What I've seen, this possibility was only for the Pro or Premium, but as Cloud subscriptions seem to benefit from opportunities and new rights, I'm not clear if I can or not do. And, if so, why can't I even preview the content of LCA ('LCA is the message I get when I go into the submenu at the bottom of FOlio Builder and overlays of Folio)
Can someone enlighten me, please?
Thank you very much
Gustavo (detachment of Madrid)
To do this you need to ensure Adobe Content Viewer is installed and it is the active application on your iPad, and iTunes is installed on your Mac. Then plug the iPad and you should see it in the drop-down list of the Folio overlays Panel overview.
Delegating vs. pro vs. Enterprise shouldn't make a difference.
Neil
-
Libretto W100 Windows 10 - all features via 3rd party (instruction) applications
Recently I was hunting for a UMPC to buy and who to is passed through a W100 on EBAY, and after a brief google I bought it immediately!
Its an amazing device, but Windows 7 really does fall. It's slow, unwieldy, and honestly not too usable.
However, Windows 10 is worlds apart when it comes to touch usability! Combine with Toshiba idea of the full screen keyboard and a virtual trackpad and the W100 a laptop full blown surprisingly usable. Win10 runs miles better than Win7, and things like scroll, zoom and pan is via texturing (like the iPad) so its smooth as!
https://www.YouTube.com/watch?v=CLWvmohEuz4
Working
10 home edition
Two multi-touch screens
Keyboard touchscreen (3rd party)
Touch Screen Touchpad (3rd party)
Shortcuts to physical key (via scripts)
Toshiba Eco
Toshiba memory cards
Toshiba Reeltime
Toshiba face recognition
Toshiba sync utility
Toshiba media controller
Webcam + ApplicationDoes NOT work
G - Sensor (displays can always manually turn)
Haptic (technically it works, but only with the booklet software, which does not work)
Booklet (unfortunately unstable or unreliable on Windows 10) softwareThe process is relatively easy, just time-consuming! That said, I take no responsibility if you follow it and he won't!
Windows 10 Upgrade
Requirements:
Libretto W100/W105 running the version of Windows 7 with all the software and drivers installed.
Last update of the BIOS
External keyboard / mouse
Download this driver- Update for SP1 and install the new updates available via Toshiba Service Manager
- With SP1 is installed, you will become eligible for the 10 free Windows Update. This allows to upgrade your operating system.
- Follow the steps in upgrade from Windows 10 (I tested and BACKSPACE work!)
- Install the above driver. Accept the warning about it being old and restart.
- Click Start, type "Control Panel" without the quotes and then open the control panel
- Open Tablet PC settings
- Click on Setup. Tap the screen to highlight and press ENTER. The second touch screen and press ENTER.
- Click Reset under internal Toshiba Panel 1024 x 600 1.
- Select the Panel 2. Toshiba internal 1024 x 600
- Click on Reset
- Select the Panel 1. Toshiba internal 1024 x 600
- Click on calibrate and complete.
- Select the Panel 2. Toshiba internal 1024 x 600
- Click on calibrate and complete.
- Close the Tablet PC settings window and return to the control panel
- Open programs and features
- Uninstall the software booklet (keyboard/touchpad. They do not work properly / at all in win10)
- Uninstall Toshiba Bulletin Board (accidents constantly)
- Uninstall Toshiba Bulletin Board customization (useless without above)
- Uninstall XT9 smart input (does not work with other keyboards)
You should now have a functioning entirely Windows 10 with two sites of touch screens as expected. The keyboard touch windows appear when you need it, but its way too small to be practical. Enter comfort keyboard. It's like the idea of keyboard Toshiba come with on steroids!
I would recommend you first get the installer how I, to ensure that it works with the operating system correctly, and then customize from there!
* Due to message size restrictions, it will be instructions to multipostKeyboard touchscreen
- Download Keyboard Comfort and install it. I support fully for buying this (I did it) is the ultimate W100 keyboard! (Free trial version is available)
- On the greetings page, check all the options and click Next
- Select the type 'MiniUnispaced' and whatever style you like
- Check "show only labels and icons...» "and click Next
- Check only 'use the movements' and "Adjust the width" and click on finish
- Right click on the new icon of keyboard on the task bar and choose Options. Move the window to the TOP of the screen
- Under properties of the hand, make sure that everything is checked
- Under keyboard shortcuts set visibility to CTRL + ALT + CAPS
- Under hotkeys value next keyboard CTRL + ALT + TAB
- Click defined the list of keyboards. Click on uncheck all.
- Check 'MiniUnispaced' and 'StandardBigAlpha' then 'Standard' then 'TwoSides2' and click OK
- Under the Visual keyboard, make sure that everything is unchecked
- Click Advanced..., and then click on the new window
- Check only «check any application as a web...» «, «do not move the keyboard to the screen...» «and to «Prevent the mouse...» ' and click OK
- Press the button of keyboard on the taskbar. Make sure that the keyboard appears on the screen at the bottom. If not: open Notepad (or anything with a text cursor) on the bottom screen and press the keyboard icon again
- Hide the keyboard by pressing the icon again and go back to the options window
- Under Position check only "lock". This will ensure that the keyboard never appears on the screen to the bottom and never the top!
- Under Zoom to ensure "Fit width" and "Height" are checked with any unchecked
- Click Save
- Click on the keyboard icon to display the keyboard
- The theme of the transparencies of Opaque background value, then use the common transparency slider to make the keyboard at your convenience. Feel free to play with other settings here.
The keyboard is now set up and has to much as the Toshiba did. The final step is to link to the keyboard key!
To do this, you must create a VBS script to send the shortcuts that the program uses.- Open Notepad, and then put this:
Set WshShell = WScript.CreateObject ("WScript.Shell")
WshShell.SendKeys "^ % {CAPSLOCK}. - Save on C:\TOSHIBA\ (or anywhere you will not accidentally delete/remove go!)
- Type of change SaveAs 'All' and call it 'Show the Touch Keyboard.vbs'
- Keep it open and change it to look like this:
Set WshShell = WScript.CreateObject ("WScript.Shell")
WshShell.SendKeys "^ % {TAB}". - Save slot in the same place, change the SaveAs type for 'All' and call it 'switch Touch Keyboard.vbs.
- Close Notepad
- Click on start and type 'button '. Open the program of Support of Toshiba Button.
- Select the button KB (single click) and select Browse. Select the "see the Keyboard.vbs button.
- Click Save. The program closes, so you will need to re - open.
- Select the button KB (Double click) and select Browse. Select "Switch Keyboard.vbs Touch.
- Click Save
The button on the keyboard should work correctly now!
-
Hello
I have a lot of problems of cursor on a new Libretto W100. Using the field courses on the display it move it in the opposite on the top of the screen. Then I go to the right below, the cursor moves in the direction towards the top left. The only way I found to stop this problem is a full reboot. And then it works OK, but when I close the lid and leave it alone for two hours, for example, come and activate the problem reappears. I especially don't even touch screens to avoid confusion between the machine. But I can reproduce it consistently.
Very annoying. Any seen elsewhere or have a solution?
Kind regards
Wim.Hi Winm
Since when you noticed this behavior? On the first day?
-
Failed to create the application of FDM
Hi all
I am a newbie in FDM Hyperion, I installed and configured HFM and FDM 11.1.2.3 2008R2 in VM window.
Installation went well and the configuration went all very well for the Application Server, Load Balancing Manager, the Task Manager and web config Manager
I am able to create a HFM application, but I am not able to create an Application <>FDM.
I am creating the application using the Workbench. So I give all the details like name of the application, description, App Path & App group under general tab Oledb Provider, the service name, user and password in the database of the tab and click on 'OK '. After a while, I get a pop up message "unable to connect to the database. Please check the information of database and verify that the database is accessible."
I did a search and found the following two links, but still no luck.
http://Hyperion-Mady.blogspot.in/2013/11/unable-to-connect-to-database-please.html
https://community.Oracle.com/thread/3538368
Please help me!
Hello
have you given a static IP to your VM.
If so, then open the hosts file and put an entry for that IP with FQDN.
It seems also that you have installed new oracle client according to the PATH variable, you don't have it?
Kind regards
-DM
-
Libretto W100 - 10 d - 3 G Module does not work after the installation of the system
Hello
I just reinstalled the software on my Libretto W100 - 10 d, from the internal HARD disk recovery partition recovery procedure.
After the intervention, I have a clean booklet; all works well, except my 3 G Module is not recognized: the SW of Wireless Manager is not installed, and the 3G module does not appear in Device Manager more!
It seems that the 3G module is not installed! of course before the recovery procedure, it worked like a charm!
I suspect something has disabled the 3G module (usually something similar happens in the BIOS...)
Can someone help me so that the 3G module working in return?
Of many tanks and best regards
Hello
Have you checked the settings in the BIOS?
To be honest I'm not quite sure if BIOS contains separate power switch or option Wlan 3G but you must absolutely check it m.To access the BIOS press ESC and F1
Where would the BIOS contains 3 G or Wlan option, make sure that this option is enabled.Then visit the Toshiba UE driver page and download and install the Ericsson 3 G driver
This is the driver for the 3G module. -
Libretto W100 - keyboard won't go away when I press the button yet once
Hello
I have a Libretto W100 and I need to make the keyboard disappear by pressing the keys on the keyboard on the left.
I formatted the booklet and installed all the drivers.
After the format I run the application of Toshiba button support and registered the button KB (single click), to the path target C:\Program Files\Toshiba\Libretto\TOSSWKBA.exe
The keyboard appears on the screen when I press the button, but it will not disappear when I press again.
Maybe I need to put something in the option field.Thanks for your help.
Hello
I read in another thread that Kaspersky 2010 version was not compatible with the touch screen of booklet.
The new 2011 version seems to be compatible.
Maybe you need to use the latest versionCheck it!
-
How can I change the volume level on the Libretto W100?
Sorry everybody explain to me how do I adjust the volume in * model Libretto W100 10 d * because I have a serious problem with any program like Media Player and others.
I tried to regulate in the control panel, but is too slow! I'm disperate help me pleaseThank you very much!!!
In the taskbar on the right site, you can see speaker symbol. Click on it and when the volume control is displayed that you can change the level by moving the controller up and down.
It works for you?
-
Libretto W100 - 10 d - What software is required to use the GPS
Hello
I have questions about this camera and exactly, I would like to know if it is possible install the libretto W100 - 10 d special SW using the potential installed on board.
This model has a characteristic maps Erickson F3607 model to use this device as the 3G network and also has GPS but I don't know how is SW right to use the card as Garmin, Tom Tom or other.Thank you very much
Hey Buddy,
To be honest I never heard that it of possible to use a GPS software such as Garmin or TomTom on the Libretto W100. I Don t but Google shows no results
I think an official response, which you get from an authorized service provider. You should contact them. Write an email or give them a call, I think that they can give you an appropriate response.
If you find something, please post it here. It would be interesting. :)
-
How to install 3G on the Libretto W100 - 10 d
info of 3g on the Libretto w100 - 10 d,
Hello
I need information and provider how to install 3g?
Thanks, much appreciated
rOnMaybe this will help you
[How to configure and connect 3G via the Manager preinstalled Toshiba wireless | http://aps2.toshiba-tro.de/kb0/FAQ1A037W0000R01.htm]
-
Will there be a Libretto W100 with Haswell of Intel CPU?
I'm in love with my Libretto w100.
I upgraded to 256 GB.Now, it takes an upgrade to Haswell.
This would solve 2 main criticisms:
-battery life
-noise because of heating.A booklet with Haswell would be the best computer in the world.
You are just gerdich
The Libretto W100 was truly a great unit it s a little bit older, but so far the two screens and virtual touch keyboard are futuristic piece of hardware.However, given that the serial number of the unit is already suspended, I think n new t processors will be built in the W100.
-
Libretto W100: touchscreen only is active
Hy...
Please help me,
I have a toshiba libretto, but only one is tactile asset...
It's my new toshiba libretto reinstall windows 7...Please help me...
André
Sorry mate but could you please provide more detail?
If I understand your original post, you have installed the new Windows 7 system on this Libretto W100 camera. Right?
Now the question: have you installed the software Toshiba essential?
You will find on the page of the driver Toshiba UE drivers and tools for the Libretto W100.
The + v + 1.0.22.00 software booklet is an essential element and its strongly recommended to install this part! -
Windows 8 on a Libretto W100 - 10 d
Hi everyone, I would like to than you think to install 8 window on a Libretto W100 10 d.
This device is not in the list of compatibility of Toshiba but... even if I tried Windows 8 on another pc and I didn't really like it (he's trying to copy the tablets in the worst way, I've never seen).
Really, I can't think it cannot work on a booklet! What do you think?
Thank youCheck this page system requirements Windows 8:
http://Windows.Microsoft.com/en-us/Windows-8/system-requirementsIf the laptop meets this condition, you would be able to install Win 8.
Maybe you are looking for
-
Slow computer, Rainbow spinning, several sound tracks in the background, repeated force constant close. I found the problem in the toolbar top inside windows... he had a hundred sites and windows listed, I brought all forward and deleted the individ
-
Messenger installation failed satellite P10 504
Hi friends, I tried to install the new Messenger even though I was happy with an old, it completes the download and then when he finished s tells me that it could not be installed.It say installation has been cancelled it gives an error 0 x 80004004,
-
I get disabled 01649 system when I try to access the BIOS on my computer.
-
How to remove a Trojan horse which, in normal mode, don't let you do almost anything a message on what you use IE: Rundl.sys is infected with (random file path) horse of Troy and his tent to send credit card information to a remote host. and it's a m
-
Custom XML of Interaction resources only the 'No Data' metric graphic poster
Hello:I created and imported a resource Interaction XML suite documentation (Centre of Documentation of Operations Manager 6.0.1 vRealize ""Add an Interaction resources XML file ""), but no matter how configure the XML file, the graph of the metric -