Light (switch) on my screen does not turn off. I have to shut my computer down several times a day to turn off the monitor.

Light (switch) on my screen does not turn off.  So, I shut down my computer and restart several times a day, because when I put it in mode 'sleep', he wakes to the top in a few minutes and will not fall asleep.  I could put a blanket on my screen when not in use, but I'd rather find a way to make it stay asleep when I tell him.

Light (switch) had already done once before and I was so worried that once I turned off the monitor that I would never get it new on... a bit short of money here, to buy a new monitor, but the next day, I pressed the power button with an additional downward pressure and I could so he could start working again (able to turn the market monitor).  It was about 3 weeks ago.  Now, the light stays green, unless I stop the whole computer.

Maybe my main problem is sleep mode, which removes the screen for like 2 minutes and then he wakes up to the top and is so rude when I myself and try to sleep, I just turn off the monitor everytime I put the computer to sleep.

Now, I can't turn off the monitor, except by turning off the computer.

Hi JDandGinger,

I suggest you follow the provided article and check if it helps.

If the problem still persists contact the manufacturer of the monitor for more help and information.

Tags: Windows

Similar Questions

  • Prblem with buttons; Cursor does not turn in the pointer (finger) into the mouseover state

    I'm programming the buttons on board animate, which are just symbols with their own timeline. I gave them actions to clicks, mouseover and mouseout/mouseouthandler(). They just call URL and are working properly, but I noticed that the cursor does not turn in the pointer (the hand with the index pointig) in the mouseover state. This creates a strange feeling, because users are not sure they are before buttons they click on them...

    Is there any solution for this?

    Thanks in advance!

    Hi Gzapiram,

    Click your button and in the properties panel, you will find a slider, with the auto default value section. Simply select the familiar hand cursor


  • Inkjet pro 6830: printer does not except off the coast of brand ink cartridges.

    I bought a new pro 6830 2 years and it was recalled for replacing head inkjet printer. Since I received

    reconditioned replacement, it does not except other other than HP compatible ink cartridges. I hear here

    is going to be the fix for the problem. Is this true?

    Hi @79pinetree,.

    Thank you for joining the HP Forums!

    I understand that your printer HP Officejet pro 6830 does not except off the coast of brand ink cartridges. I am pleased to see that for you!

    Please see this post, dedicated to the best printing experience, of @Bill_F.

    If it helps, please consider clicking on "accept as a solution." And, please click the thumbs up icon. The two icons are below this post.

    I hope that answers your question!

  • Satellite A210 1AP - the screen does not turn

    I had a problem about a month ago with my Toshiba Satellite A210-1AP, just that the screen did not turn. Was working on the computer, all the lights were on. The light that shows the HARD disc flickered, as usual, but with display always off. So I stop, and the next time I tried it was warking as usual, with display turned on, he asked if I want to start windows normally or in safe mode (as when it is restarted abnormally). Then worked normally for a few days, and then it happens again. At this point, I could not go to the service (computer was in warranty, and how do you prove that something happens sometimes if it happened there). So I continued to use it, and as the time past the problem was more often. So I decided to go to the service.

    Guy in the service, said that the problem is the motherboard, so he changed the motherboard and it took months for him to do, and then when I called he said that it still does not. And maybe he has change rooms, display, graphics card is perhaps a problem, that he has not seen the problem like this...

    So my question is do you know what could be the problem? And the second question is can I demand of him, because he went from 30 days to give me a new computer rather change all parties to this issue?

    Thank you

    Hi mate,

    It's really hard to say what causes this problem, but I think that notebok technicians do a good job and they will be committed to repair your laptop as soon as possible. Maybe they ordered some new parts, but they are not available at this time

    Theoretically, all that could be the reason of this problem FL inverter, LCD screen, motherboard, graphics card, cable, etc.

    So I think you should call the technicians still what is the current status.
    But I doubt that you can get a new laptop for free. If it of still under warranty, it will be repaired.

  • Satellite Pro C660D - screen does not turn

    I just got my Satellite Pro C660D back from repair (for a faulty fan), but the screen does not light when I start the laptop.

    She lights up on the front (and I can rotate the block number power sp that the keyboard works).
    Any ideas?

    I agree, I mean the laptop should work just fine after it has been fixed by ASP so I think that something was not right here and the technician must check this!

  • Screen does not turn off automatically


    I have problems with my display does not turn off automatically (for example, after 3 minutes of inactivity). What is happening is that the display actually goes to the maximum brightness, even if the screen indicates that the brightness is set to 0.

    Should which driver I update to solve this problem?

    Thank you

    Ok. I decided to uninstall AMD video drivers and reinstalled them. Now its working as it should.

    See you soon...

  • Yoga Pro 2 - screen does not turn on new 8.1 Windows Installer

    Last week, I received my new Yoga 2 Pro and the rotation of the screen worked correctly.

    I decided to delete the partitions and install my own version of Windows 8.1.

    Since then, the rotation of the screen does not work. The screen rotation button does nothing and I do not have the "Enable automatic rotation" box in the screen resolution

    In my device manager, I have an error on 'Collection HID sensor' saying "this decice cannot start" (Code 10). Failed to initialize sensor collection HID descriptor. I don't know if this is related.

    Can someone help me?

    Thank you

    I was able to solve my problem and would like to share the solution with others in case this happens to you too.

    I basically installed this package of media ( and after that auto-rotation check button and work of suction works correctly.

    Hope that this can also contribute to others.

  • P2415Q does not turn on the connection with display port cable


    I have computer with Sapphire hd 7970, there display port and HDMI outputs.

    I plugged the cable I got with the monitor for mini DP DP and it worked well for a week,

    Today, I turned on my computer, that the computer turns on I hear the windows starting but there is

    no signal on the screen, so I tried to connect it with the second DP cable I have but it still does not work.

    I also connected the computer to another monitor DP cable and it works fine.

    Please notify.

    Thank you.

    * Turn off the monitor
    * Disconnect all cables from the screen, including the power cable
    * Press the power monitor in pendant button 15 seconds
    * Reconnect monitor cables and re - test

  • I am a new user of iPhone. My iPhone 6 s screen does not turn (the home screen and the screen when you use all the apps). My lock screen switching is disabled, the control center and the zoom is off too. What can I do now?

    Rotation screen IiPhone 6 s problem

    Have you tried to force the reboot of your iPhone?

    First of all, try to force your system to restart.

    • Force reboot your device will not erase the content currently on your device.
    • You can force your device to restart even if your screen is black or do not answer your buttons.

    Press and hold the sleep/wake and home buttons at the same time for at least 10 seconds until you see the Apple logo.

  • BlackBerry Smartphones Cant Get to sleep and backlight screen does not turn off

    I tried to change the lighting settings in the menu options... will not work.

    Backlight does not cease, keyboard and track ball all lights.

    Tried it plugged, usually connected and always off.

    Only way it turns off when it is in the case.



    With the BlackBerry device powered time, remove battery for a few seconds and then reinsert the battery to restart.

    Now let's see if the backlight will turn off.

    Options > keyboard/screen, what is your timeout set on?

  • IPhone 5 s screen does not turn off when it is plugged in to the charger.

    Hi all

    I use Iphone 5s from the last 4 months. Recently I came across this situation. Sometimes I see screen only turns off when its plugged into the charger. After a few hours of mobile will be turned off. Sometimes I manually press the power button to turn off the screen.

    Please let me know how to solve the problem.

    Kind regards


    Hello there, Manjunath K P!

    Thank you for joining the communities Support from Apple! Looks like you're having a problem getting the phone to automatic locking. I know that I want my iPhone did not stay when over and have the screen lock correctly. You can, of course, that your Auto-Lock is set up correctly. Your range of choice of automatic locking from 30 seconds to 5 minutes before locking the screen, or you can choose never so that it does not lock. To change the settings, tap the settings icon, click the general button. Tap the AutoLock option and choose your preference.

    If these steps do not work, and you still do not see the iPhone Autolock when you're in charge, you can go to settings > general > reset and then press reset all settings. This removes all the data. For example, if you have 16GB of music, videos and photos, this option will not remove. What this does is actually reset some of your settings to factory default. It is not a complete withdrawal of the parameters. It deletes all of your preferences for Wi - Fi, Bluetooth, do not disturb, Notifications, general, sounds, brightness & wallpaper and privacy.

    Once that is done, go ahead and try to set the automatic lock again and see if it works.

    See you soon!

  • The computer screen does not turn off after the specified power Options

    I tried several ways on trying to turn off my monitor of my laptop through the options of food and the use of some applications such as nircmd but nothing works every time. I'm sure it can be a program I am not using a device. I have a wireless mouse plugged into a USB port, but I know that's not what is keeping the PC awake, as always happens when it is not plugged. The thing that bothers me is I don't know how to identify this process shut off and I tried to put end as many process I can safely or those that I am knowledgeable in the subject to close. I would really like this feature back. Thanks in advance for the answers and ask if all the details are needed.

    I understood what was the 'problem '. It turns the screen of my laptop never turns off if my laptop is installed on a sloping surface, because it assumes that I'm working on it. When I went to bed my laptop on a flat level surface, is power does work normally, as reduces the brightness of the screen to the bottom, then turns off after a while. I guess it must be a form any a single function on my laptop. Thanks for all your answers.

  • Treo 600 screen does not turn off

    Usually my treo 600 stops automatically after 2 minutes, but at times it stays on and I can't turn it off by pressing the power button.  The only way I can turn it off is by doing a HotSync first. It's OK when I'm home with my computer, but can't when I'm away from the computer.    Someone knows how to fix this?

    You can try a reboot to hot 10 seconds and see if that corrects the problem. Remove the battery for at least 10 seconds to leave the Treo powerdown completely, similar to a stop on a PC.

    If this doesn't resolve the problem, then a hard reset is the next step. The hard reset will erase all data on the device both hotsync before resetting.

    Here is a link to copy and paste into a browser for the hard reset procedure., /? St = 80, E = 0000000001089938613, K = 2178, Sxi = 9, case is obj(887)

    Message relates to: Palm i705

  • Is there a container that does not cut off the screen?

    I am trying to line up a few ImageViews who absorb the size of the screen next to each other. I have them all in 1 container.

    Problem is that everything that is not on the screen is cut off.

    Is there a way to prevent this?

    I know ScrollView allows images off the screen, but I don't want it to be floating.

    Nevermind, figured it out lol...
    I had to just a larger quantity than the size of the screen of the container minWidth value (or minHeight according to wherever it is cut).

  • Can not turn on the monitor on the Satellite once the display turns off after 10 min


    I have a problem with my laptop...

    When the screen turns off after 10 minutes, it no longer lights!

    I move the mouse, try typing on the keyboard, but it does not work...

    to activate the display again once I should close the lid for the hibernation, then open it again!

    I hope that you will help me @_ @!


    Check it please
    To correct the behavior please download and apply the patch (KB917332) which could be found in the resolution detailed below. I hope this will help.

Maybe you are looking for