State of power failure - Blue Screen Of Death - Windows Vista driver

Similar Questions

• Blue Screen Driver IRQL blue screen of death Windows 7 Ultimate edition and Windows Vista

  original title: BSOD Driver IRQL blue screen of death Windows 7 ultimate and Windows Vista

  I get the BSOD, and they are different every time.

  I had originally Windows Vista on my pc (HP m8300f) and it worked fine for 3 years until last month, I started to have these BSOD.

  So I thought a new clean install of Windows 7 Ultimate would solve the problem. Well, I was very happy to get the new operating system installed, but a few hours later that darn BSOD appeared and im now distraught.

  What is my RAM? My drivers? My hard drives?

  Computer IM but I'm certainly some type of technology. I have basic computer knowledge and that's all.

  You can download minidump files and find the information system here in this zip file http://www.sendspace.com/file/mfx420

  This issue is very very irritating and has ruined a lot of my work.

  Well up to now (18 hours) my computer has not had the BSOD and what I did is that I removed 1 GB of ram for my motherboard. Their were two sticks of 512 MB. I took them both. Now, I have 2 GB of ram running in my system and had not had a BSOD or an error after you have done this.

  What is the problem with my ram? I now have 2 sticks of RAM on my motherboard and both are 1 GB each stick. What is the mix n match that causes a problem all of a sudden? My computer came with this stock of installation. I also noticed the ram I got were the brand Samsung and the other on my motherboard are another brand.

  Well idk I hope it was my problem. We'll see.

• Driver vista Power State failure Blue Screen of Death

  Please help me I think it's that I'm doing this... What is going on.. I have replaced the ram and video card, but has seen this problem before I did it... also just reinstalled windows vista... Please help https://skydrive.live.com/redir.aspx?cid=7cbac7e09f2ecb07&resid=7CBAC7E09F2ECB07! 105 & Thierry = 7CBAC7E09F2ECB07! 101 & authkey =! AEE_idLDpolnFKY

  Hello

  Those showed all CAUSE as a Windows component that means something different it led into error.
  Then ZIP or RAR the actuall minidump files and download them on SkyDrive and post a link here for us
  to analyze the other.

  Check this KB:

  The shutdown process does not terminate and you receive an error message on a computer that is
  running Windows Vista or Windows Server 2008: "Stop 0x0000009F"
  http://support.Microsoft.com/kb/972109

  ----------------

  You use Roxio or Nero programs? They have been known to cause this problem even
  If they worked well for a long period of time. If so check with their support.

  Check this thread for more information on using BlueScreenView, MyEventViewer and other methods of
  Troubleshoot BlueScreens - answers top 3 (+ 1 more).

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system/blue-screen-plug-and-play-detected-an-error-most/3deab2fa-4000-4136-8c78-a3d22b1db009

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
  for the office or in the Documents folder and download them from there

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive to upload collected files.
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  ----------------------------------------------------------

  References to Vista also apply to Windows 7.

  This "might" be a power problem, even if this isn't the most common cause - in this case
  It seems that the PSU could be the fault.

  9F is probably a driver issue. Security/antivirus/antispware programs can also cause these issues.
  Have you added the recent devices or the updated drivers - don't forget to check in the Windows updates to see
  If a driver has been updated before this happen. This can also be caused by a loose card or cable
  and even a weak power supply.

  This error means that a driver does not properly support the power state. Check in Control Panel - device
  Manager to ensure that the drivers are not stop during sleep - double-click adapter - NETWORK adapter
  and WIFI - healthy and others - tab power management - uncheck allow the computer to turn off.
  Maybe the only has a problem.

  Start - type in the search - find MSCONFIG in top - right, click on – RUN AS ADMIN

  General tab - tick this box start Diagnostic - APPLY / OK - REBOOT

  Try it now. If the computer still blue screens thinks that video driver. Otherwise think the card NETWORK, Wifi, sound, or...
  (and it might still be video interacts with something else). See following message for my
  generic driver update methods.

  BCCode: 9F 0x0000009F<-- read="" this="">
  * 1167.html? order = date http://www.faultwire.com/solutions-fatal_error/Driver-Power-State-Failure-0x0000009F-

  ==========================================

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do without if needed fail or the Vista DVD or recovery command prompt mode
  Options if your system was installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Various blue screen of death windows 7, Asus laptop

  Experts/dear Microsoft community,

  Recently I had some problems with my laptop. I tried reformatting and everything but nothing seems to solve the problem long term, brief (2-3 days)

  My computer crashes (blue screen of death), whenever I play big games online. Games such as Company of Heroes, or Dota 2, etc. If I don't play these games solo (offline) I have no problems. Also all other programs work perfectly.

  I have a feeling that it has to do with my Asus laptop drivers, I tried to update, restore and re - install, but without result.

  To tell you that as the scenario for the crash: I start the game, I log on online, join a game. Then after 20 to 25 minutes of play online with no loss of FPS, it auto-shutsdown the game with absolutely no message, followed with an accident soon after, sometimes immediately.

  Here's the accident report I got the program: Whocrashed

  Look forward to hearing your suggestions.

  Concerning

  computer name: ICRASHEVERYWEEK
  Windows version: Windows 7 Service Pack 1, 6.1, build: 7601
  Windows dir: C:\Windows
  Material: N61Ja, ASUSTeK Computer Inc..
  CPU: GenuineIntel Intel (r) Core i5 CPU M 430 @ 2.27 GHz Intel586, level: 6
  4 logical processors, active mask: 15
  RAM: 4140355584 total
  VM: 2147352576, free: 1929850880

  --------------------------------------------------------------------------------
  Crash Dump Analysis
  --------------------------------------------------------------------------------

  Crash dump directory: C:\Windows\Minidump

  Dumps are enabled on your computer.

  Friday, November 7, 2014 22:01:49 this computer crashed
  crash dump file: C:\Windows\Minidump\110714-44912-01.dmp
  This was probably caused by the following module: ntoskrnl.exe (nt + 0x5996A0)
  Bug check code: 0x1000007E (0xFFFFFFFFC0000005, 0xFFFFF80003BF56A0, 0xFFFFF880035AEE88, 0xFFFFF880035AE6E0)
  Error: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M
  file path: C:\Windows\system32\ntoskrnl.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &
  Bug control description: This indicates that a system thread threw an exception who did not catch the error handler.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  Friday, November 7, 2014 22:01:49 this computer crashed
  crash dump file: C:\Windows\memory.dmp
  This was probably caused by the following module: ntkrnlmp.exe (nt! KeBugCheckEx + 0x0)
  Bugcheck code: 0x7E (0xFFFFFFFFC0000005, 0xFFFFF80003BF56A0, 0xFFFFF880035AEE88, 0xFFFFF880035AE6E0)
  Error: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED
  Bug control description: this bug check indicates that a system thread threw an exception that the error handler did not.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  Friday, November 7, 2014 18:29:29 GMT crashed your computer
  crash dump file: C:\Windows\Minidump\110714-17737-01.dmp
  This was probably caused by the following module: athrx.sys (athrx + 0x1C4F76)
  Bug check code: 0x1000007E (0xFFFFFFFFC0000005, 0xFFFFF88005E67F76, 0xFFFFF880035A7438, 0xFFFFF880035A6C90)
  Error: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M
  file path: C:\Windows\system32\drivers\athrx.sys
  product: Atheros CB42/CB43/MB42/MB43 network card driver
  company: Atheros Communications, Inc.
  Description: Atheros Extensible wireless device driver
  Bug control description: This indicates that a system thread threw an exception who did not catch the error handler.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  A third-party driver has been identified as the likely cause of the system error. It is suggested that you search for an update the following driver: athrx.sys (pilot device wireless Atheros Extensible, Atheros Communications, Inc.).
  Google search: Atheros Communications, Inc. SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M

  Friday, November 7, 2014 18:27:43 GMT crashed your computer
  crash dump file: C:\Windows\Minidump\110714-14570-01.dmp
  This was probably caused by the following module: atikmdag.sys (atikmdag + 0x1421E5)
  Bugcheck code: 0x3B (0xC0000005, 0xFFFFF88005B4A1E5, 0xFFFFF88003E795E0, 0x0)
  Error: SYSTEM_SERVICE_EXCEPTION
  file path: C:\Windows\system32\drivers\atikmdag.sys
  product: ATI Radeon Family
  company: ATI Technologies Inc.
  Description: ATI Radeon driver in Kernel Mode
  Bug control description: This indicates that an exception happened during execution of a routine that passes from non-preferred to the privileged code code.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  A third-party driver has been identified as the likely cause of the system error. It is suggested that you search for an update the following driver: atikmdag.sys (ATI Radeon Kernel Mode Driver, ATI Technologies Inc.).
  Google search: ATI Technologies Inc. SYSTEM_SERVICE_EXCEPTION

  Friday, November 7, 2014 6:26:57 PM GMT crashed your computer
  crash dump file: C:\Windows\Minidump\110714-15194-01.dmp
  This was probably caused by the following module: atikmdag.sys (0xFFFFF88005B20B5B)
  Verification of error code: 0 x 50 (0x0, 0xFFFFF88005B20B5B, 0xFFFFF8A0024CF000, 0x0)
  Error: PAGE_FAULT_IN_NONPAGED_AREA
  file path: C:\Windows\system32\drivers\atikmdag.sys
  product: ATI Radeon Family
  company: ATI Technologies Inc.
  Description: ATI Radeon driver in Kernel Mode
  Bug control description: This indicates that invalid system memory was referenced.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  A third-party driver has been identified as the likely cause of the system error. It is suggested that you search for an update the following driver: atikmdag.sys (ATI Radeon Kernel Mode Driver, ATI Technologies Inc.).
  Google search: ATI Technologies Inc. PAGE_FAULT_IN_NONPAGED_AREA

  Friday, November 7, 2014 17:57:41 CEST your computer crashed
  crash dump file: C:\Windows\Minidump\110714-49280-01.dmp
  This was probably caused by the following module: atikmdag.sys (atikmdag + 0x899D90)
  Bugcheck code: 0xBE (0x12F9A6860, 0xFFFFF880035BC560, 0xFFFFF880062ACD90, 0xE)
  Error: ATTEMPTED_WRITE_TO_READONLY_MEMORY
  file path: C:\Windows\system32\drivers\atikmdag.sys
  product: ATI Radeon Family
  company: ATI Technologies Inc.
  Description: ATI Radeon driver in Kernel Mode
  Bug control description: sounds if a driver attempts to write to a memory segment read-only.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  A third-party driver has been identified as the likely cause of the system error. It is suggested that you search for an update the following driver: atikmdag.sys (ATI Radeon Kernel Mode Driver, ATI Technologies Inc.).
  Google search: ATI Technologies Inc. ATTEMPTED_WRITE_TO_READONLY_MEMORY

  Friday, November 7, 2014 17:55:49 this computer crashed
  crash dump file: C:\Windows\Minidump\110714-16692-01.dmp
  This was probably caused by the following module: ntoskrnl.exe (nt + 0x75BC0)
  Bugcheck code: 0x3B (0xC0000005, 0xFFFFF8000395AA49, 0xFFFFF8800AB310C0, 0x0)
  Error: SYSTEM_SERVICE_EXCEPTION
  file path: C:\Windows\system32\ntoskrnl.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &
  Bug control description: This indicates that an exception happened during execution of a routine that passes from non-preferred to the privileged code code.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  Saturday, November 1, 2014 8:24:12 PM GMT crashed your computer
  crash dump file: C:\Windows\Minidump\110114-17550-01.dmp
  This was probably caused by the following module: rdyboost.sys (rdyboost + 0x2C476)
  Bug check code: 0x1000007E (0x0, 0xFFFFF880035248B8, 0xFFFFFFFFC0000005, 0xFFFFF88003524110)
  Error: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M
  file path: C:\Windows\system32\drivers\rdyboost.sys
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: driver for ReadyBoost
  Bug control description: This indicates that a system thread threw an exception who did not catch the error handler.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  The accident took place in a standard Microsoft module. Your system configuration is perhaps incorrect. Maybe this problem is caused by another driver on your system which cannot be identified at this time.

  Saturday, November 1, 2014 8:22:52 CEST your computer crashed
  crash dump file: C:\Windows\Minidump\110114-18142-01.dmp
  This was probably caused by the following module: ntoskrnl.exe (nt + 0x75B90)
  Bugcheck code: 0x1E (0x0, 0x0, 0x0 0 x 0)
  Error: "KMODE_EXCEPTION_NOT_HANDLED"
  file path: C:\Windows\system32\ntoskrnl.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &
  Bug control description: This indicates that a kernel-mode program generated an exception which did not catch the error handler.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  Wednesday, October 15, 2014 9:09:56 CEST your computer crashed
  crash dump file: C:\Windows\Minidump\101514-50856-01.dmp
  This was probably caused by the following module: athrx.sys (athrx + 0xF9D77)
  Bug check code: 0x1000007E (0xFFFFFFFFC0000005, 0xFFFFF880051BED77, 0xFFFFF880033A7708, 0xFFFFF880033A6F60)
  Error: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M
  file path: C:\Windows\system32\drivers\athrx.sys
  product: Atheros CB42/CB43/MB42/MB43 network card driver
  company: Atheros Communications, Inc.
  Description: Atheros Extensible wireless device driver
  Bug control description: This indicates that a system thread threw an exception who did not catch the error handler.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  A third-party driver has been identified as the likely cause of the system error. It is suggested that you search for an update the following driver: athrx.sys (pilot device wireless Atheros Extensible, Atheros Communications, Inc.).
  Google search: Atheros Communications, Inc. SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M

  --------------------------------------------------------------------------------
  Conclusion
  --------------------------------------------------------------------------------

  13 dumps were found and analysed. Only 10 are included in this report. 2 third party drivers have been identified to be the cause of breakdowns of the system on your computer. It is strongly recommended that you check the updates for these drivers on their corporate Web sites. Click on the links below to search with Google for updates these drivers:

  athrx.sys (Atheros Extensible, Atheros Communications, Inc. wireless device driver.)
  atikmdag.sys (ATI Radeon Kernel Mode Driver, ATI Technologies Inc.)

  If no updates for these drivers is available, try searching with Google on the names of these drivers in combination errors that have been reported for these drivers and include the brand name and model of your computer as well in the query. This often gives interesting results of the discussions of the users who have similar problems.

  Read the WARNINGS GENERAL topic for troubleshooting failures of the system for more information.

  Note that it is not always possible to say with certainty whether a reported driver is in fact responsible for crash your system or cause is in another module. However, it is suggested that you look for updates for the products that these drivers belong to and regularly visit Windows Update or activate the automatic updates for Windows. In case a piece of defective material is originally wrong, a Google search on the errors of control of bug with the name of the model and brand of your computer can help you to deepen this review.

  Analysis of Dump 1Crash
  --------------------------------------------------------------------------------

  Crash dump directory: C:\Windows\Minidump

  Dumps are enabled on your computer.

  Monday, October 13, 2014 5:41:45 PM GMT crashed your computer
  crash dump file: C:\Windows\Minidump\101314-17004-01.dmp
  This was probably caused by the following module: ntoskrnl.exe (nt + 0x75B90)
  Verification of error code: 0 x 17 (0x0, 0x0, 0x0 0 x 0)
  Error: CID_HANDLE_DELETION
  file path: C:\Windows\system32\ntoskrnl.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &
  Bug control description: this bug control appears very rarely.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  Monday, October 13, 2014 5:41:45 PM GMT crashed your computer
  crash dump file: C:\Windows\memory.dmp
  This was probably caused by the following module: ntkrnlmp.exe (nt! KeBugCheck + 0x0)
  Verification of error code: 0 x 17 (0x0, 0x0, 0x0 0 x 0)
  Error: CID_HANDLE_DELETION
  Bug control description: this bug control appears very rarely.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  Monday, October 13, 2014 12:15:52 CEST your computer crashed
  crash dump file: C:\Windows\Minidump\101314-17784-01.dmp
  This was probably caused by the following module: ntoskrnl.exe (nt + 0x2EDF95)
  Bug check code: 0x1000007E (0xFFFFFFFFC0000005, 0xFFFFF80003145F95, 0xFFFFF88004650448, 0xFFFFF8800464FCA0)
  Error: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M
  file path: C:\Windows\system32\ntoskrnl.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &
  Bug control description: This indicates that a system thread threw an exception who did not catch the error handler.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  Monday, October 13, 2014 11:09:34 AM GMT crashed your computer
  crash dump file: C:\Windows\Minidump\101314-14320-01.dmp
  This was probably caused by the following module: ntoskrnl.exe (nt + 0x75BC0)
  Bugcheck code: 0xA (28, 0 x 2, 0 x 0 x 0, 0xFFFFF80002F21D80)
  Error: IRQL_NOT_LESS_OR_EQUAL
  file path: C:\Windows\system32\ntoskrnl.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &
  Bug control description: This indicates that Microsoft Windows or a driver in mode accessed kernel memory paged at DISPATCH_LEVEL level or above.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  Monday, October 13, 2014 2:53:45 AM GMT crashed your computer
  crash dump file: C:\Windows\Minidump\101314-46987-01.dmp
  This was probably caused by the following module: ntoskrnl.exe (nt + 0x75BC0)
  Bugcheck code: 0x3B (0xC0000005, 0x0, 0x0, 0xFFFFF88002DA2910)
  Error: SYSTEM_SERVICE_EXCEPTION
  file path: C:\Windows\system32\ntoskrnl.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &
  Bug control description: This indicates that an exception happened during execution of a routine that passes from non-preferred to the privileged code code.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  Sunday, September 28, 2014 17:57:12 CEST your computer crashed
  crash dump file: C:\Windows\Minidump\092814-16926-01.dmp
  This was probably caused by the following module: dxgmms1.sys (dxgmms1 + 0xC0A1)
  Bugcheck code: 0x1E (0x0, 0x0, 0x0 0 x 0)
  Error: "KMODE_EXCEPTION_NOT_HANDLED"
  file path: C:\Windows\system32\drivers\dxgmms1.sys
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: DirectX Graphics MMS
  Bug control description: This indicates that a kernel-mode program generated an exception which did not catch the error handler.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  The accident took place in a standard Microsoft module. Your system configuration is perhaps incorrect. Maybe this problem is caused by another driver on your system which cannot be identified at this time.
  Google search: Microsoft Corporation KMODE_EXCEPTION_NOT_HANDLED

  Monday, September 22, 2014 6:50:05 PM GMT crashed your computer
  crash dump file: C:\Windows\Minidump\092214-42525-01.dmp
  This was probably caused by the following module: ntoskrnl.exe (nt + 0x75BC0)
  Bugcheck code: 0x1A (0xFFFFF780C0000000, 0x1DEE, 0 x 5003, 0x420700003BD8)
  Error: MEMORY_MANAGEMENT
  file path: C:\Windows\system32\ntoskrnl.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &
  Bug control description: This indicates that an error occurred serious memory management.
  This could be a case of corruption of memory. The corruption of memory more often happens because of software errors in the defective drivers buggy, not because of RAM modules.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  --------------------------------------------------------------------------------
  Conclusion
  --------------------------------------------------------------------------------

  7 dumps were found and analysed. A third-party driver has been designated to be the cause of breakdowns of the system on your computer. It is strongly recommended that you check the updates for these drivers on their corporate Web sites. Click on the links below to search with Google for updates these drivers:

  dxgmms1.sys (DirectX Graphics MMS, Microsoft Corporation)

  If no updates for these drivers is available, try searching with Google on the names of these drivers in combination errors that have been reported for these drivers and include the brand name and model of your computer as well in the query. This often gives interesting results of the discussions of the users who have similar problems.

  Read the WARNINGS GENERAL topic for troubleshooting failures of the system for more information.

  Note that it is not always possible to say with certainty whether a reported driver is in fact responsible for crash your system or cause is in another module. However, it is suggested that you look for updates for the products that these drivers belong to and regularly visit Windows Update or activate the automatic updates for Windows. In case a piece of defective material is originally wrong, a Google search on the errors of control of bug with the name of the model and brand of your computer can help you to deepen this review.

  PC! PK

  These two were related to the material.  Specifically of the RAM.  Please run memtest

  

• Inspiron 6000 - won't start Windows - Blue Screen of Death - the hard drive is Toast! Help me!

  I have a Dell Inspiron 6000 2-1/2 years, with XP Media Center.  Last night at the start, he went to the Blue Screen of Death.  I tried to restart about 10 times, each time by selecting a variety such as 'use last known good Configuration, Safe Mode, Etc.' nothing works.  Get to the point where the windows flag is waving in the wind (may be waving goodbye?) and then hangs at Blue Screen of Death.

  To make matters worse, this is the only hard drive, I have not saved for a few months and I can't seem to find my recovery/boot drive... I swear to you that I made a copy when you are prompted 2-1/2 years ago?

  in any case, I started press F12 and got to the dell diagnostic interface.  I ran the tests in the Section of the blue screen, and almost all categories of hard drives contained errors.  I tried Googling some of them and almost all of the shots indicate disk hard death is imminent.

  So, anyone have any ideas how I can:

  1 retrieve the data

  2. get Windows transferred to another hard drive (without having to buy a whole new copy)

  Any help is appreciated deeply... only 3 weeks until final and just lost a huge amount of assignments for my grad. school...

  Thank you

  Aaron

  
  

• Power failure blue screen of Windows Vista - driver

  Hi all

  ASUS laptop computer under Win Vista Home 32-bit Edition. Have 2 problems:

  1 power driver blue screen failure.

  Please see my 2 Dump files to:

  https://www.dropbox.com/s/5c4subvkhw2lryf/Mini031615-03.dmp?DL=0

  https://www.dropbox.com/s/qsd0nv61yer4e3b/Mini031615-04.dmp?DL=0

  After studying this problem it seems it has to do with the USB drivers? I have no yellow question mark in Device Manager.

  (a) it - I have to refresh battery USB? If yes pls show me how?

  (b) do I avoid Windows update to reinstall the drivers on the original from ASUS drivers? If yes Pls tell me how?

  (c) do I reinstall the drivers Asus? which device?

  The problem could be related to a HP mouse wireless connected to the laptop?  It always worked fine until I disconnected and reconnected.

  2 laptop won't wake up from sleep, I have to use the switch to close.

  Appreciate your help.

  OR

  There are two related issues here.  First associated with snp2uvc.sys generic PC Camera Driver and secondly to Kaspersky.  I update the reader of the camera (your is 2007) aware and remove Kaspersky and replace it with MSE >

  Kaspersky is a common cause of BSOD.

  
  

  I remove and replace it with Microsoft Security Essentials if you use vista or win 7.  If you are using win 8 or higher, I would use the built-in Defender.

  http://support.Kaspersky.com/downloads/utils/kavremover10.zip
  http://www.Microsoft.com/security_essentials/

• What is the problem: "Blue screen" means in Windows Vista Home Premium?

  I had a problem before in 2009 that says my computer has an unscheduled stop called 'blue screen '. It happened when I had the lid closed and when I close it, the computer can host until the cover is in place, and that's when the error occurred. It didn't happen, but I would like to know if it will happen. It happened twice before and I have the data on it. (Also, no solution ever since.) Anyone know what this means and how to prevent it from happening again? Thank you!

  Product

  Windows

  Problem

  Stop unexpectedly

  Date

  08/08/2009 16:19

  Status

  Report sent

  Signature of the problem

  Files helping to describe the problem (some files may be is no longer available)

  Additional information about the problem

  BCCode: d1

  BCP1: FFFFFA6002BD84DC

  BCP2: 0000000000000002

  BCP3: 0000000000000008

  BCP4: FFFFFA6002BD84DC

  OS version: 6_0_6002

  Service Pack: 2_0

  Product: 768_1

  Information about the server: 86c2a272-28cf-487c-890f-32b136fd9c53

  Mini080809 - 01.dmp

  SysData. XML

  Version.txt

  Problem event name: BlueScreen

  The system version: 6.0.6002.2.2.0.768.3

  Locale ID: 1033

  Hi, landfills are almost 1 years. Why are you asking me now?

  The accidents were caused by the driver of keyboard and mouse PS2 (i8042prt.sys).

  Do you still use these devices PS2? If Yes, try to avoid them and only use a keyboard and a USB mouse.

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Blue Screen of Death - Windows 7

  Hello world!

  I'm really upset with my laptop, these a few days ago. Recently, I had the BSOD over and over again. I use Windows 7 (32 bit) on my HP 14-d008AU. I also looked for answers on the web, tried everything, and I still get this BSOD.

  He looked enough like this (I guess).

  

  Can someone help me with the please my problem?

  Thanks in advance! I waiting for your answers.

  And then I just already this ut myself. So for all those who are going to have this kind of problem. Before you do all these things as the restoration of the system or other method of troubleshooting. Make a troubleshooting first material. What I did was removed the RAM, cleaned with an eraser and brushing decision-making. After that, simply put in its place. Since I did that, I never had the BSOD again.

  I hope it will work for you too!

• Blue Screen of Death - Windows 7 product # QW743AA #ABC

  This is a first time for me and unable to solve the problem.  Even though I have 4 the OS recovery disks I still can't solve the problem.  I would be grateful some support and thank you to you all!

  I'm always looking for my files... it certainly isn't an easy process.

  And I'm not sure that all of my files have been saved... for the life of me I am not able to find some of them, but I'll keep trying.

  Thank you very much for your support.

  With your advice, I appreciate what I've been able to accomplish.

  Once again thank you,

  Winn

• STATE of POWER FAILURE DRIVER Blue Screen of Death

  I m getting error after reboot please help me...

  http://www.techsupportforum.com/forums/f299/DRIVER_POWER_STATE_FAILURE-600594.html#post3437627

  PLS, get the files from this dump... Pls in the case where no update more... .pls answer...

  where to download the files, though these could not get?

  Hello

  We cannot access the minidump here unless we partner who I don't want to do. Please download the minidumps
  to your SkyDrive or other file sharing sites.

  Analyses on this site watch dwvkbd.sys was the CAUSE.

  ------------------------------------------------------

  Hello

  Check this KB:

  The shutdown process does not terminate and you receive an error message on a computer that is
  running Windows Vista or Windows Server 2008: "Stop 0x0000009F"
  http://support.Microsoft.com/kb/972109

  ----------------

  You use Roxio or Nero programs? They have been known to cause this problem even
  If they worked well for a long period of time. If so check with their support.

  Check this thread for more information on using BlueScreenView, MyEventViewer and other methods of
  Troubleshoot BlueScreens - answers top 3 (+ 1 more).

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system/blue-screen-plug-and-play-detected-an-error-most/3deab2fa-4000-4136-8c78-a3d22b1db009

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive to upload collected files.
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  ----------------------------------------------------------

  References to Vista also apply to Windows 7.

  This "might" be a power problem, even if this isn't the most common cause - in this case
  It seems that the PSU could be the fault.

  9F is probably a driver issue. Security/antivirus/antispware programs can also cause these issues.
  Have you added the recent devices or the updated drivers - don't forget to check in the Windows updates to see
  If a driver has been updated before this happen. This can also be caused by a loose card or cable
  and even a weak power supply.

  This error means that a driver does not properly support the power state. Check in Control Panel - device
  Manager to ensure that the drivers are not stop during sleep - double-click adapter - NETWORK adapter
  and WIFI - healthy and others - tab power management - uncheck allow the computer to turn off.
  Maybe the only has a problem.

  Start - type in the search - find MSCONFIG in top - right, click on – RUN AS ADMIN

  General tab - tick this box start Diagnostic - APPLY / OK - REBOOT

  Try it now. If the computer still blue screens thinks that video driver. Otherwise think the card NETWORK, Wifi, sound, or...
  (and it might still be video interacts with something else). See following message for my
  generic driver update methods.

  BCCode: 9F 0x0000009F<-- read="" this="">
  * 1167.html? order = date http://www.faultwire.com/solutions-fatal_error/Driver-Power-State-Failure-0x0000009F-

  ==========================================

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do without if needed fail or the Vista DVD or recovery command prompt mode
  Options if your system was installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  .

• Lenovo z50-70 used power up after the blue screen of death on windows 10

  Hello Sir/mam,.

  My laptop wouldn't boot / lights up once the blue screen of death appeared this morning.

  I am browsing and suddenly the blue screen appeared and I remember in the written form 'system error' and the laptop will restart. something like that. I can not really remembered the exact error. But I'm sure it's the BSOD.

  When I tried the laptop powered, the power light was for about 1-2 sec even with the fan, and then they continue or let's just say that it will not feed. I've done several times, but the result is the same.

  I also tried the solution on what I read here in the forum. "Press and hold the power down for about 30 seconds."

  I tried too many times but it won't work.

  Please help me to LENOVO.

  Thank you

  Thanks for the reply. I already solve the problem. I already did what you said so many times, but did not work.

  I just discovered that one of the ram is not working. That's all /... case closed

• Blue screen of death - STOP: c0000218 {Registry file failure}

  Original title - Blue Screen of Death

  I got a BSOD that reads the following:

  STOP: c0000218 {Registry file failure}
  The registry cannot load the hive (file):
  \SystemRoot\System32\Config\DEFAULT
  or its log or alternation.
  It is damaged, missing, or not accessible in writing.
  Beginning physical memory dump
  Total physical memory dump.
  For more assistance, contact your system administrator or technical support group.
  I don't know if anything can be done without having to take the computer for repair. Any help or answers are greatly appreciated!

  Hi sarajt

  
  When exactly do you get the Blue error screen?

  Please refer to the Microsoft article provided below and check if the steps help you solve the problem.

  http://support.Microsoft.com/kb/830084

   

  I hope this helps.

• We had a power outage in our area, the computer was on and running, got the blue screen of death with the following: __0x000000C2, 0 x 00000043, 0xD6C61000, 0 x 00000000, 0 x 00000000 BAD POOL CALLER

  We had a power outage in our area, the computer was on and running, got the blue screen of death with the following:
  0X000000C2, 0 X 00000043, 0XD6C61000, 0X00000000, 0X00000000 BAD POOL CALLER

  If you have not saved your data and you want to start the computer with Linux Livecd such as Knoppix and copy your data files on an external hard drive. It is a precautionary measure before the step follows because things happens. ;-)

  Then do a repair installation.

  http://www.michaelstevenstech.com/XPrepairinstall.htm

  If the repair installation does not work, test the equipment to ensure that none have been damaged during the blackout and then do a clean install of Windows.

  http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot

  http://michaelstevenstech.com/cleanxpinstall.html - Clean install - how-to
  http://www.elephantboycomputers.com/page2.html#Reinstalling_Windows - what you will need at hand

  If all goes well, no equipment was damaged during the shutdown. Consider buying a power supply (battery backup). APC and Belkin are good; for a computer, simply spend about $60. MS - MVP - Elephant Boy computers - don't panic!

• Blue screen of death event 41 (task category 63), Kernel-Power

  Original title: Blue Screen of Death

  Hello, I get the blue screen of death on my desktop computer.  I looked at records of Viewer event and here are the results:

  Event 41 (task category: 63), Kernel-Power

  BugcheckDode10

  BugcheckParameter1 0x0

  BugcheckParameter2 0x2

  BugcheckParameter3 0x3

  BugcheckParameter4 0xfffff8000369592c

  True SleepInProgres

  PowerButtonTimestamp 0

  I'd appreciate comments on this issue!  Thank you very much!

  These were related to scmndisp.sys which is a driver that is associated with a Netgear wireless adapter.  Yours is 2011 so I re - install the most recent driver available and update the following drivers

  Old drivers

  AFC.sys 12/07/2006 01:48:20
  lmimirr.sys 10/04/2007 18:32:45
  C:\windows\system32\drivers\lmirfsdriver.sys 2008-07-14 12:26:56

  How to find drivers:

  
  Search Google for the name of the driver
  Compare the Google results with what is installed on your system to determine on what device/program, it belongs to
  Visit the web site of the manufacturer of the hardware or program to get the latest drivers (do not use Windows Update or Device Manager Update Driver function).
  If there are difficulties to locate them, post back with questions and someone will try and help you find the right program

  The most common drivers can be found on these pages:
  http://www.carrona.org/dvrref.php
  http://SysNative.com/drivers/

  Driver manufacturer links are on this page: http://www.carrona.org

• Paviljoen dm1-3125ed: power adapter causes a blue screen of death

  Regularly, I get a blue screen of death on my portable entertainment dm1 which is 4 years old now. After lots of research and the elimination of the possible causes, I discovered that the problem only occurs with the associated map. When I work on computer only battery seems fine. I replaced the power supply, but that has not solved the problem. Any ideas?

  I have upgraded to Windows 10 some time ago and the problem seems to be resolved. Probably a driver problem which was solved by the upgrade.