limitation of complex enter the physical layer
Hi allIs there a limit on the modeling of MDB when we use the complex join in the physical layer. I have 1 and 4 Dimension table with more physical table relation.
F-> D1-> D2-D3-D4 > >
F.Col1 = D1. Col1, D1. Col2 = D2. Col2, D2. COL3 = D3. COL3 and D3. COL4 = case when D4. Col5 is null then D4. Another Col6 D4. End Col5)
I use a complex join D3 - D4. In the report, I get the error [nQSError: 12002] communication to the Socket call = recv error: (number = 10038) an operation was attempted on something that is not a socket
If I create the new calculated column CalCCol in D4 table in sql, containing the same logic (case when D4.) Col5 is null then D4. Another Col6 D4. End Col5) and using this join column in physics D3-> D4 (D3. COL4 = D4. CalcCol) in the physical layer, the report works without error.
Should we do differently modeling in MDB layer or just this is a limitation with complex join in the physical layer?
Layer MDB
Fact table is joined with the D1 dimension table that has four (D1, D2, D3, D4) logic Table Source (LTS).
Thank you
Virat
I don't think that there are limits for complex joins in MDB and physical layer. Correct me if I'm wrong...
NQSError reg. : error 12002--> may be reason for cache currupted can see when it changes the online mode...
Remove the cache and re-start the services that can help you.
Assuming that you have mapped D2, D3, D4 tables D1 by add, button seems good.
Send me your RPD record if you have any questions...
If brand pls help
Published by: Srini VIEREN on January 22, 2013 16:01
Tags: Business Intelligence
Similar Questions
-
Problem definition complex join in the physical layer
I have a problem with the definition of a complex join in the physical layer.
I have the following two tables:
DIM_ORG
Id_Org
DT_Start
DT_End
Nom_org
FACT_REV
Id_org
Recipes
The tabel DIM_ORG is type 2 SCD. The current/active nom_org can be identified in the table because DT_End will be empty.
Using the expression builder to configure the physical join I have entered the following expression:
DIM_ORG. Id_Org = FACT_REV. Id_Org AND DIM_ORG. DT_End is null
The expression builder accepts the syntax, but when I want to close the physical foreign key window I get the message:
[nQSError: 30001] Only the columns, designated operators and predicates are allowed.
Any suggestions how to solve this problem? Am just missing something? All I want to do is set up a join to pick up the active nom_org of my size.
Thanks for your help!Make a foreign key in the physical layer:
DIM_ORG. Id_Org = FACT_REV. Id_OrgIn the MDB, set the logical table org dim source/content in tab/where a part:
DIM_ORG. DT_End is nullConcerning
Goran
http://108obiee.blogspot.com -
Complex is associated with the physical layer
Hello Experts
Anyone know if we can create complex joins in the physical layer if so why we do and on what scenario we create complex joins in the physical layer?
Published by: Newby 13 Sep, 2010 14:10Hello
>(Interview question)?Do not post here the interview questions, take a scenario and build get to us, we will help you
http://forums.Oracle.com/forums/search.jspa?objid=F378&q=complex+joins+physical+layer
-
Hi guys,.
I am not able to make the number of rows updated in the physical layer, I get an error message failed to connect. It comes to OBIEE 11 g Linux approx.
I put the tnsnames.ora file in the following path:
/ * / pkgs/linux/intel/OBIEE_DIT/MW_HOME/Oracle_BI1/network/admin /.
I have no admin under
/ * / pkgs/linux/intel/OBIEE_DIT/MW_HOME/oracle_common/network /.
But if I enter all TNS in Data Source name, I am able to connect:
(DESCRIPTION = (ADDRESS = (PROTOCOL = TCP) (HOST = xxx.xxx.com) (PORT = 1671)) (CONNECT_DATA = (SERVICE_NAME = US1OBIEE)))
I am not able to understand the question...
Thank you
Amit
It seems that the RPD is looking for local tns config... try to use as hostname: port / ServiceName
It should work, just in case where does not! stop to do so since it is question.
If brand aid
-
How to apply join types in the physical layer
Hi all
In Oracle Bi Admin tool, I've imported the views in the physical layer, and tried to reach points of view, now can we change the type of join in the physical layer?
sound off for me, how can I register the type of join as "left outer" or "right outer" participates in the physical layer.
can you pls help me, awating for your answers
Kind regards
MaryHi Mary,
In fact, you do not specify such information until the layer of logic (MDB). Just pretend that your physical join is an inner join for the moment. Put the tables in the MDB layer. Then look at the MDB joins. You will see that they are created as complex joins in the MDB layer, it is a best practice in the MDB layer. You will also notice a drop down which allows you to change the join of inner left outside/right external/full outer.
Hope that helps!
-Joe
-
In the physical layer star schema
Recently, I came across a question from a colleague. The discussion continues as follows:
He asked me what is the star schema, and where you can set? Physical layer or layer MDB?
I've explained on the star schema and responded to his rest of the doubt that we define it in the layer of MDB.
His immediate question is why can not we define it in the physical layer? Since MDB layer allows to build three-dimensional models, therefore, we must build it into this layer itself is my answer. But later in the evening, when I started to reflect on my way to the House, I started to think about his doubts.
Here is what am curious that we can unite our physical layer tables too, why we can't define star in the physical layer? and why only in MDB? and what are the differences in the joints that we made in the physical layer as the layer MDB?
I got tired of getting answers to these documents and in a few other online resources, but am not to succeed. Then, approach this forum in anticipation. Can anyof you help us to better understand these concepts.Yes, you need to (or is at least strongly recommended) to use complex joins in the MDB layer. I know that you can also use physical layers in the layer MDB, but I don't really know what happens when you do that and what are the consequences. I think I read once your knuckles are 'fixed' and the BI server is not to choose between the joints.
So the idea is: set the 'true' joined in the physical layer using physical joints and define complex joins in MDB layer and let the BI server decide what physical join, it should use.
-
How to set the join in the physical layer between the cube and the relational table
Hello
I have a data aggregated in essbase cube. I would like to supplement the information contained in the cube with data from relational source.
I read the article http://community.altiusconsulting.com/blogs/altiustechblog/archive/2008/10/24/are-essbase-and-oracle-bi-enterprise-edition-obiee-a-match-made-in-heaven.aspx that describes how do.
In this article, I think I have to define a complex join between any cube of essbase to my relational table in the physical layer.
But when I use the Manager to join I am only able to define jooin between the tables of the source of the relationship, but not with the cube imported.
In my case, I'm trying to reach the risk dimension in the cube based on risk_type_code (Gen3 members), with risk_type_code in relationship table dt_risk_type.
How can I create this join?
Concerning
HananeRelationTable.dt_risk_type = cube. "" Gen3, risk. "
That's all ;-)
See you soon,.
C. -
Hello experts.
I've download a RPD on my local machine. I have already imported all of the tables used in this RPD on my local machine. I created the DSN (obiee_reports), and the test connection is successful.
I created a pool of connections with the DSN (obiee_reports). However, when I try to "view data" in the physical layer, the system throws an error "connection failed". Also, I am unable to create any analysis.
I m do not know what I missed. Please notify.
Thank you and best regards,
Serene
If you use Oracle db then go to OIC as calling interface.
HostName: port / ServiceName would be one that is suitable for use
-
Indicators of the physical layer
Can anyone tell how to query to find clues to the physical layer to the RPD?
THX,
ParagHello
You can search in the administration tool > repository queries.
Select Type = physical Table
Click on filter > operator = OR > select item index = > contains > reference nameIf your meeting PARALLEL RPD, REWRITE, STAR_TRANSFORMATION advice in several tables, then mix with OR conditions such as
Tip contains PARALLEL OR
Tip contains REWRITING OR
Tip contains STAR_TRANSFORMATIONHope this helps
-
Add physical column in advance in the physical layer without using import
Hi Experts,
Is it possible to add new physical column in the physical layer in advance if you already knew that this new physical column is added to the OLAP table in the future?
Thank youHello
Yes you can do it. Make sure you use the same column in the report once you add the column to the OLAP table.check if useful/correct...
Thank you
prassu -
Close the connection to the physical layer
Hello
I would like to know how to turn off the connection to the source that I do not in my physical layer to avoid obiee server check at startup?
As if I had a lot of connection to the source due to the installation of apps Olivier how can I disable them (outsourced metadata string, forecast...)?
Thanks in advancebecause I found outsourced for example of metadata strings but not peoplesoft OLTP?
This means - it is not verified by obiee server at startupI only need connection "oracle data warehouse.
Do one thing in each physical database in the physical layer go Conntection pool and right click--> display associated-> boot block... check for unwanted block Init... Double-click on it and disable it.
Published by: user Sept 11, 2012 06:27
-
Import data 'ESSBASE' in the physical layer, it is about the relationship.
Hi Experts,
In 11.1.1.6.0 administrative tools.
When import "ESSBASE" Mutiple resource data in the physical layer and change the type of inner join to a left join in the meantime Dim and made the sale in MDB, it doesn't in the response.
Are you facing th same question before? Thank you.Hello
have you checked "LEFT_OUTER_JOIN_SUPPORTED" of the physical layer - > properties - the database > features? by default, people with reduced mobility.
Thank you
-
Updating of the physical layer (new columns)?
Hello
I'm new to OBIEE. (11.1.1.5)
I have a defined physical layer and now I added a few extra columns in these tables in the database.
Now, how to get these new columns reflected in the physical layer.
I tried the tools-> utilities-> update physical layer.
But it only checks the existing data in the columns types already in the physical layer.
Help, please.
Published by: 937825 on July 16, 2012 18:46Use the file-> the option import metadata
Tables and columns that are in the RPD are grayed out and that are not available are black.Mark correct or useful if pls help
-
The physical layer Naming Convention
Hello
I am trying to install my physical layer and see the reference to name them correctly. When I look at the examples of sales, I see they use A01, A02, etc..
But I have others indicate that I should their name:
fact_sales
dim_customers
Anyone has any good advice on how to put in place a naming convention that is appropriate to the physical layer.
And that I should just using this naming convention in names for the alias tables?
Thank you
KathyUse as
SALES_F and CUSTOMERS_D_F made
_D for Dimensions
At the top of caseFor Alias, use DATE (W_DAY_D) closing
Shud be useful
-
Is that fact is mandatory in the physical layer?
Hello
Fact table is required in the physical layer. I've done everything. I have only 5 Dimensions. How to join tables in the physical layer.
Thank you
VVRVVr,
Again, you go ahead with the method described above, but be sure that you will do something weird here. You may face erros while creating a simple report based on 3 tables independent Sun for which I am not sure abt the granularity. Always do a test and for simple indicates it shud work well as BI server will automatically choose this made a model for SUN - SUN.A small question, why are you so stressed out creation made in the physical layer?
Close this thread and open a new thread for any other question.
Hope its helpful
Maybe you are looking for
-
Necessary recovery for my Satellite L750 disk
Hello How could I get the oem recovery disc for Satellite L750, part no: psk2ya - 09 k 028, given that I can't come back to factory default
-
Damaged screen coated end of 2013 Macbook Pro?
MacBook Pro 15 inch model of retina end 2013 - OS X El Capitan The coating of the screen of my macbook covered the period I owned, just to clean it with a cloth that has come with the macbook. At first, I thought it might just be an isolated issue, b
-
On Counterstrike, Windows XP Home Edition C++ runtime error
I have a really crappy computer. When I try to play counter-strike, he plays in connection 1tps. I tried to lower the graphics to make it smoother, but every time I click on apply I had this "runtime error Microsoft C++" and I have to use the Task Ma
-
is there a backlight on the hp Pavilion dm4-3002sa
If there is can you tell me how you turn it on. Thank you
-
Only the needs of the Cisco Aironet 1550 series a WLC?
Hello Nice day. I would like to ask if the Cisco Aironet 1550 series requires a controller to run. Note that the references SKU in this fomat AIR-CAP1552E-A-K9-AIR-CAP1552EU-A-K9. I noticed that on the autonomous access point there they keyword 'S