Limitations on the external use Apache server

Similar Questions

• With regard to Apex configuring the listener using Weblogic Server.

  Dear all,

  Well, I have configured my interlocutor Apex in my Web server and everything worked fine. But my requirement is like I need for my URL should like this format http://hostname/ReportServer: port/dev/apex but by default, as we know it comes as http://hostname/ReportServer: port/apex/dev (as I gave the url mapping path/dev). So I tried by changing its name as DEV while deploying the APEX. File. WAR and I gave the root context than dev. Now question is even if configuration directory given i like "dev" but still its showing as 'Listener not configured'. Pls someone help me in this. Help is very appreciated.

  My configuration file is "/home/oracle/apex_listener.2.0.3.221.10.13/dev"

  But even once apex named subdirectory is created inside this dev automatically.

  In regards to this link, I had an idea but its incomplete since his unanswered, so I'm bit confused too.

  https://community.Oracle.com/thread/2134379

  I thought to change httpd.conf file and give redirect URL but I'm not sure that can we redirect modulewise as separate 'apex' named subdirectory is created in "dev" then configuration gets effect as how it will work and mod_rewrite option I have seen but can't understand as including one to pick up. Please suggest...

  My Version of the apex is 4.2.3

  Apex listener Version is 2.0.3

  As appropriate, any other information please ask me.

  Kind regards

  Nitesh Perron.

  Dear all,

  Finally I found the solution for this.  I put here so that it can be useful to others who may face difficulties like me,.

  Floorconstruction:

  After changing the root of context just start your deployed war file and test it.

  While reaching the URL,

  Web page showing "listener apex not configured" and it will show you the location of the configuration on the Web page itself.

  Then you simply copy all directories and subdirectories (that were created when you set up your database using the file. War) at the location that shown on the Web page.

  As we change the root context so a named directory context root allows to create inside the path configured, if web is unable to find configurations because it happens inside the different directory so just copy everything and try. It worked for me very smoothly.

  My position was ' /home/oracle/apex_listener.2.0.3.221.10.13/apex"(before changing the context root in weblogic server).

  Then after the change and start the deployment once again, it became ' /home/oracle/apex_listener.2.0.3.221.10.13/dev', since I gave my root of context like "dev."

  So here I just copied directory "apex" on the dev directory and it worked fine and I got my desired URL as http://localhost:port/dev/apexhttp://localhostport .

  And all applications also works very well.

  Still, I felt its not correct way to view security, but this is the solution I found and I will try apache to redirect my URL.

  Thank you

  Kind regards

  Nitesh Perron.

• Portege R600 - cannot update the BIOS using Win server 2008

  Hi all.

  Pls help...

  I tried to update my bios to the new version, but I can't.

  I just downloaded bios update of the toshiba site for portage r600 for my model number (bios update 1.80 - winner), I unzip the zip, run the exe, but error popup came:

  Package for the TOSHIBA BIOS ver.3.2.9
  Unsupported product type is installed.
  Package BIOS BIOS Version: Ver.1.80
  Current BIOS version: Ver.1.40

  So my question is what am I doing wrong? I'm trying to update my bios from windows.

  is my version of windows: windows server 2008 Enterprise Edition x 64 SP1 (don't ask why, I just have to run Server 2008)

  Thank you.

  Hello

  Your OS windows seems not to be the Windows which was preinstalled on your Portege
  You cannot update the BIOS by using the windows server 2008 Enterprise Edition x 64

  You will need to put the system which has been pre-installed by Toshiba

  Good bye

• Limitation of the size using MS Backup backup

  When I am using MS Backup and backup on a USB key, it fails due to the limit of 4 GB FAT32 file structure.  I use Acronis True Image, because it breaks the backup into several files.  I want an another backup because of the structure of True Image files.  Is there a way to get around this or software to which is attached a file that can be read without special software being preinstalled on the disc?  Backup will work with the USB, the file size limit is the problem.  I would like to use the USB as it is less expensive ($35 for 16 GB), I have several backups and store them off-site and it is faster than my external hard drive.  I prefer to use backup rather than copy / paste, because you can save sets of files from backup rather than having to select the individual files you want to include or exclude backups each time.   Thanks in advance for your comments.

  I just wanted you to know that I found the answer.  I was unable to format one of my readers for memory stick USB using the techniques above.  But I did an internet search and came up with the following article.  (http://www.ntfs.com/quest22.htm)  It describes how to go to the device and select "optimize performance". After selecting this option, you can use the process cited by Praseetha K. to format to NTFS flash drive.  It'll back in the drop-down list box.  But that will happen that after selecting the option optimize for performance and apply.  My system must be different from all the systems described in the answers because I can't come up with all the menus via the techniques mentioned but by using 'My Computer', Device Manager' and 'Properties', I was able to convert the file format.   But be careful.  Under 'my computer' it will allow you to format a drive including your boot drive.  Make sure that you have selected your USB key before selecting the format!   And it will erase any information on this drive.   Thank you all for your help and maybe it will help others.
  Everett

• Can not connect with the FTP using NAT server.

  Hey, people!

  One machine in the net 200.2.2.0, with ip 200.2.2.222 (ftp client) must connect

  with a server FTP, using the ip 201.1.1.222 nat, but who can not connect.

  A newspaper using, serial interface, I saw the server response to the connection request.

  Using a different disconnection, in fas0/1 of the interface, I don't see the response from the server, I can

  not to see if nat has been done.

  Why?

  What's wrong?

  What can I do?

  To put this machine in another NET, 201.1.1.0 is so hard!

  Look, a router interface has ip 201.1.1.1.

  !

  interface FastEthernet0/0

  IP 201.1.1.1 255.255.255.0

  No cdp enable

  !

  interface FastEthernet0/1

  IP 200.2.2.2 255.255.255.0

  IP nat inside

  No cdp enable

  !

  interface Serial0/0

  Description INTERNET

  IP 100.100.100.30 255.255.255.252

  NAT outside IP

  No cdp enable

  !

  IP nat inside source static 200.2.2.222 201.1.1.222

  no ip address of the http server

  !

  Thanks in advance,

  Renato

  Hello Renato.

  also, it shouldn't make a difference, because your access list allows any last statement, try and add the following line to your access list:

  access list 103 permit tcp a whole Workbench

  access list 103 permit tcp any newspaper host 201.1.1.222 eq ftp

  --> access list 103 permit tcp any what newspaper of host 201.1.1.222 eq ftp - data

  access list 103 permit tcp any newspaper host 200.2.2.222 eq ftp

  --> access list 103 permit tcp any what newspaper of host 200.2.2.222 eq ftp - data

  access list 103 permit tcp any any 0 65365 range journal

  access-list 103 allow udp everything any 0 65365 Beach

  access-list 103 permit icmp any any newspaper

  access-list 103 permit ip any any newspaper

  Also, try to remove the access list together and see if that makes a difference...

  Kind regards

  GP

• How to use the external package in OpenScript 12.5.0.2?

  Hello.

  There is a feature in OpenScript called libraries of functions. It works like a charm, and that's fine.

  But I wonder if it is possible to use external classes, not functions. Lets' we have a packet com.company.utils, I want to use for all OpenScript tests.

  It is imported into the project. OATS IDE itself indicates that the module is imported, helps the external use of the classes and so on, but when I try to run the script, it does not always succeed except NoClassDefFound.

  No chance I can do external code packages (jars NOT) work?

  Hello

  One way is you can add the jar files to the assets and call the class of pot in the code and object creation will help you use its methods

  Otherwise, keep the class file for your code to java with the script and import the same class your script. Create an object of class and then you can call the methods of the same class

  Kind regards

  Dembélé M

• Compensation copy in the Cache of the external drive made bootable disk full - where / how to remove?

  My boot drive became full on my Mac Pro (end of 2013 Quad Core, I installed 64 GB 1866 MGz DD3 RAM), OX El Capitan with 250 GB HD running - it was completely full and buzzing constantly warnings etc - then I found that I had used 192,85 GB on my user folder - I have deleted my desktop, downloads and deleted the Recycle Bin.  Properly, I did a few Google searches on how to move the users folders and files of applications on an external drive using the command sudo Ditto.

  I created a new user account and tried to copy the files using Terminal Server (my files are time machine saved).  I get error messages in the Terminal it produces in series through files, noting that start-up disk is full and no space for copy cache (or something to that effect). So I've put an end to the terminal window.

  I deleted an another 10 GB by removing some applications on my HD that I can re - download.

  I tried the same process and got the same error messages as Terminal run the copy command and put an end to the window of the terminal again.  When I search the two accounts, clear Trash, running MacKeeper I can't find where the 10 GB of cache is stored, or how to remove them and I wonder how many GB of cache I.

  Tips on how to find / erase this interrupted copy hiding in order to free up space, and second, alternative ways to move or copy a large WAD of (192,85 GB) files on an external drive without having to complete the cache on the source drive?

  Many thanks in advance,

  Michael

  For advice on where your data is stored and how much storage, it must here > http://pondini.org/OSX/LionStorage.html

  MacKeeper will cause nothing but problems on your Mac > do not install MacKeeper: Apple Support communities

  Uninstall MacKeeper > http://applehelpwriter.com/2011/09/21/How-to-uninstall-mackeeper-malware/

  Create a new user account will have no effect on the overall storage.

  http://www.Macworld.com/article/1165698/Macs/seven-ways-to-free-up-drive-space.h tml

• Actions, sent through OAM - how to receive the apache server?

  Hello
  
  OAM we send values through custom type called propertytype (instead of headervar and cookie). We have configured which in OAM, but the apache server and the connector custom TAI that we have developed for websphere is not able to recognize? Personalized TAI connector is just for receivinig the data being sent and that we use as a webgate of the apache server.
  
  Can you please help me how to solve this problem?
  
  Thank you
  Kind regards
  Prashant

  Hi Prashant,

  The data are sent by the access server and interpreted by clients as appropriate. The webgate, who is one of those customers, basically needs to operate within the limits of HTTP and therefore not yet looking for custom action types. The custom connector TAI ASDK calls do you? If so, look at the method "+ java.util.Hashtable getActions (java.lang.String actionType) +" in the com.oblix.access.ObUserSession class. This method, called as appropriate after isAuthenticated/isAuthorized will retrieve the custom action that is returned by the access server.

  -Vinod

• OSX Apache Server: how to redirect the http request?

  Hi all

  I have a Mini Mac OSX Server El Capitan running. It already serves some sites. Normal Server Web sites:

  -site1.example.com

  -site2.example.com

  Now, I have installed an application that has its own built-in web server. This application would be normally accessible via http on port 80. However, http on port 80 connections are automatically considered trapped by integrated apache of the OSX Server. Therefore, I now put the web application to run in a different port to apache. I also setup a subdomain, so that users can access this application directly, but they also have to type in the port in the URL - for example, the new web app site is reachable at the:

  -myapp.example.com:7117

  What I would do, is for users to simply access the application using:

  -monappli.exemple.com

  I know that there is a way for us to have apache to "Reroute" all requests for a specific to an internal port subdomain automatically, but I don't even know where to start. What are the files we need to configure on OSX Server? How configure us them?

  Any guidance would be greatly appreciated.

  I had the same requirement and has resolved the way you want to as described below.

  1. Define the additional app to run on another port
  2. Create a site in.app using port 80 and the same host name you want to use for the additional application
  3. Set up a redirection for this site in.app as follows
  4. Source = /, Destination = http://hostname.domain.com:1234 /, Status = Permanent (301)

  Of course, use the correct host name, the domain and port for your situation.

  PS. the same approach I have described above also can be used to redirect the corresponding https port 80 or 443 site.

• How to use the external screen with my Satellite M30?

  Hi guys, I have the following problem:

  I have a portable Satellite M30-642 former. My keyboard it is completely broken (spilled something on it) so I use an external USB keyboard.

  Now that I bought a TFT I wanted to use it as a primary device, so I need to take the laptop to the external output.
  The laptop itself recognizes as a secondary screen already, but this isn't what I want.
  Problem is I can't switch from the display without the FN key devices!

  I tried to search the net and this forum - but the solution posted does not work for the M30. There is no option in the utility of HW and not in the BIOS to enable the external keyboard support.
  Please is there any other combination of keys that would work or a software utility that allows me to turn on? It's a really bad situation for me :(

  All solutions anyone? :(

  Greetings and thanks in advance
  HQ

  Hello

  Please don't be crazy on me but I write here very often and somehow try to help, but I'm still irritated if someone thinks that anything is possible. Unfortunately, you have to accept that sometimes there is hardware limitation and there is nothing to do.
  I want to talk about primary and secondary monitor.

  On most laptops, the LCD is always set as primary and cannot be changed. So, as far as I know, without using the FN + F5 key combination you extend the desktop to external display and use both of them. Using display settings you should be able to switch to an external display only (display control panel settings NVIDIA advance settings and so on). Please test only because I don't have M30, but the principle is used the same.

  If you will be able to use external display only try to restart your laptop and see on which screen the office will be shown. If you will be lucky and office will be shown on the external display, try to extend the desktop to second monitor (laptop LCD).

  Good bye

• Cannot access the Web server in the DMZ from the inside using IP global

  Hi all

  I hope it's a very simple question.

  I'm running a PIX 515 firewall v6.3. I set up a Web server in my DMZ and use static NAT for re-branded it overall static IP address. Access from the outside of the demilitarized zone works remarkably well. I can access inside the interface Web site using the internal IP, but I can't access it from inside interface using the global IP are entrusted to him.

  Is there a particular reason why this would not be allowed? My feeling was that the request would be forwarded via the external interface (as it is a global IP address) and then be bounced back by my sense of the ISP the request would come to the new external interface (as the static NAT is applied to the external interface).

  However if I try and access the global IP from my inside interface, then the browser can not find the server.

  can someone explain why this is so? Any information would be appreciated.

  see you soon,

  Wayne

  ---------------------------------

  6.3 (3) version PIX

  interface ethernet0 100full

  interface ethernet1 100full

  interface ethernet2 100full

  ethernet0 nameif outside security0

  nameif ethernet1 inside the security100

  nameif dmz security50 ethernet2

  hostname helmsdeep

  domain p2h.com.sg

  fixup protocol dns-length maximum 512

  fixup protocol ftp 21

  fixup protocol h323 h225 1720

  fixup protocol h323 ras 1718-1719

  fixup protocol http 80

  fixup protocol they 389

  no correction protocol rsh 514

  fixup protocol rtsp 554

  fixup protocol sip 5060

  fixup protocol sip udp 5060

  fixup protocol 2000 skinny

  fixup protocol smtp 25

  No fixup protocol sqlnet 1521

  fixup protocol tftp 69

  names of

  acl_out list access permit tcp any host 203.169.113.110 eq www

  access-list 90 allow the host tcp 10.1.1.27 all

  pager lines 24

  debug logging in buffered memory

  Outside 1500 MTU

  Within 1500 MTU

  MTU 1500 dmz

  IP address outside pppoe setroute

  IP address inside 192.168.1.1 255.255.255.0

  dmz 10.1.1.1 IP address 255.255.255.0

  no failover

  failover timeout 0:00:00

  failover poll 15

  No IP failover outdoors

  No IP failover inside

  no failover ip address dmz

  location of PDM 202.164.169.42 255.255.255.255 inside

  location of PDM 202.164.169.42 255.255.255.255 dmz

  location of PDM 10.1.1.26 255.255.255.255 dmz

  location of PDM 10.1.1.26 255.255.255.255 outside

  location of PDM 172.16.16.20 255.255.255.255 outside

  location of PDM 192.168.1.222 255.255.255.255 inside

  history of PDM activate

  ARP timeout 14400

  Global 1 interface (outside)

  Global (dmz) 1 10.1.1.101 - 10.1.1.125

  NAT (inside) 1 0.0.0.0 0.0.0.0 0 0

  NAT (dmz) 0-list of access 90

  NAT (dmz) 1 0.0.0.0 0.0.0.0 0 0

  static (dmz, external) 203.169.113.110 10.1.1.27 netmask 255.255.255.255 0 0

  Access-group acl_out in interface outside

  Timeout xlate 03:00

  Timeout conn 01:00 half-closed 0:10:00 udp 0: CPP 02:00 0:10:00 01:00 h225

  H323 timeout 0:05:00 mgcp 0: sip from 05:00 0:30:00 sip_media 0:02:00

  Timeout, uauth 0:05:00 absolute

  GANYMEDE + Protocol Ganymede + AAA-server

  RADIUS Protocol RADIUS AAA server

  AAA-server local LOCAL Protocol

  Enable http server

  http 192.168.1.222 255.255.255.255 inside

  enable floodguard

  string fragment 1

  Console timeout 0

  Terminal width 80

  Code v6 pix or less don't let you have traffic "back" or return flow via the same interface on which it was sent. Having also your bounce back off of an external server traffic is never a good idea, because you won't be able to distinguish which and rogue attacks by spoofing someone outside your network.

  Since you are using pix 6.3 code, you may be able to outside the NAT. Add this static to your config:

  static (dmz, upside down) 203.169.113.110 10.1.1.27 netmask 255.255.255.255 0 0

  You may need to run a clear xlate after adding the new static statement. Note that the interfaces: it's demilitarized zone, inside inside, dmz.

  I would like to know if it works.

• Technical limitations of the server VSphere Essentials?

  I'm running the free VSphere hypervisor and the vSphere Client. It seems that there are a ton of limitations in the free version. So far, I stumbled upon:

  (1) failed to move a virtual machine from one storage location to another

  (2) unable to set "Promiscuous" mode on a network adapter

  The list of documents things which should be available in the client, but did not exist (for example, the tabs together or options). For me it will be continue to occur as I continue to implement my VM.

  
  I work in a small business environment, but still have needs of which is apparently offered in some of the other products (for example. VMotion, VCenter?). But I use only two virtual machines on a single server with 1 CPU and that's all that I will probably have need for a while. Is there a way that I can know what are the technical limitations? I don't want to buy the product and know that I am still limited.

  
  Thank you

  Greg

  A good comparison can be found here: http://www.thomas-krenn.com/en/wiki/VMware_vSphere_5_Editions_Overview

  And a nice stop on all linked to their information function names are found in this Google Doc: https://docs.google.com/spreadsheet/ccc?key=0AkDahcUh0bJkdElsVXdfeUNlN3d4dWRDdWRKTFNld2c&usp=sharing#gid=2

  At the end of the day, but, if you want to move a running virtual machine to a store of data to another, must be the 'norm'... any level Essentails come with it.

• Embedded the swf using the external video (FLVPlayback) error #2035 / #2044

  I struggled with this a lot recently, and I don't even know if it's at all possible.

  I am currently working on a project where I am incorporating a .swf inside another .swf.

  The built-in .swf file however also uses the external videos FLVPlayback to load component, this is where the problem starts.

  When you publish the .fla project I get the 2035 # IOErrorEvent when tracing the problem I get the #2044, it is to be expected however.
  

  The embedded swf is always looking for external videos, but since the new ROOT is the swf file, in which it is integrated, it will not find these videos.

  I need to know if there is a way I can specify or link these external videos required by the embedded swf file FLVPlayback component.

  I really can't be bothered again all the video content and their incorporation in the timeline.

  Thank you.
  

  The code inside the SWF will trigger these errors will occur if you don't have the source for sovereign wealth funds to stop it.

  If you do then you can just access SWF files loaded the mother/stub swf you have and check anything with a name or instance on the display list with the code, as all of the FLVPlayback components. You can then tell them the correct path.

  Otherwise, it would take something like a rewrite mod apache to redirect paths incorrect film to the correct path.

• Error importing CSV files with "hidden" characters using the external Table

  Hi people
  
  Bit of a strange here.
  
  Well, we are accustomed to the use of the external Table method to load data from CSV files in the database, but a recent event presented us a problem.
  
  We have received some CSV files that "look like" regular CSV files, but Oracle will not load them.
  
  When we looked at the CSV using VIM on a UNIX machine, we saw the following characters 'hidden' between each regular character in the file.

  ^@

  If a string that looks like this when opened in Excel/Wordpad etc.

  "TEST","TEXT"

  Looks like this when exmained with VIM

  ^@"^@T^@E^@S^@T^@"^@,^@"^@T^@E^@X^@T^@"

  Has anyone encountered this before?
  
  Thank you very much
  
  Simon Gadd
  Oracle 11g 11.2.0.1.0

  Hi Simon,.

  ^ @ represents the ZERO character (0x00).
  So, most likely, you have a file encoded in Unicode.

  You need to specify the character set in the record specification (and if necessary the byte order mark), for example:

  CREATE TABLE ext_table
  (
    col1 VARCHAR2(10),
    col2 VARCHAR2(10)
  )
  ORGANIZATION EXTERNAL
  (
    TYPE ORACLE_LOADER
    DEFAULT DIRECTORY dump_dir
    ACCESS PARAMETERS
    (
     RECORDS DELIMITED BY '
  ' CHARACTERSET 'UTF16'
    FIELDS TERMINATED BY ','
    )
    LOCATION ('dump.csv')
  )
  REJECT LIMIT UNLIMITED;
  

  http://download.Oracle.com/docs/CD/E11882_01/server.112/e16536/et_params.htm#i1009499

• Ask about the limitation of the use of the adjustment of CPU and RAM essbase

  Hello Experts,
  
  Is there a setting that limits the high use of essbase application on the server CPU and RAM in Essbase? If so, what are they?
  
  Thanks in advance for your suggestions.
  
  Kind regards
  Sudhir
  
  Published by: 637223 on December 23, 2009 16:40

  Usually I wish I could put more resources behind Essbase, not less. Why would you do?

  Are you thinking of something like SQL Server Resource Governor?

  If you are in a virtual machine environment, high-level products VMWare don't allow guys IT fairly accurately the range up to a server/server farm and governed how much CPU/DASD Gets a virtual machine.

  Kind regards

  Cameron Lackpour