With regard to Apex configuring the listener using Weblogic Server.

Dear all,

Well, I have configured my interlocutor Apex in my Web server and everything worked fine. But my requirement is like I need for my URL should like this format http://hostname/ReportServer: port/dev/apex but by default, as we know it comes as http://hostname/ReportServer: port/apex/dev (as I gave the url mapping path/dev). So I tried by changing its name as DEV while deploying the APEX. File. WAR and I gave the root context than dev. Now question is even if configuration directory given i like "dev" but still its showing as 'Listener not configured'. Pls someone help me in this. Help is very appreciated.

My configuration file is "/home/oracle/apex_listener.2.0.3.221.10.13/dev"

But even once apex named subdirectory is created inside this dev automatically.

In regards to this link, I had an idea but its incomplete since his unanswered, so I'm bit confused too.

https://community.Oracle.com/thread/2134379

I thought to change httpd.conf file and give redirect URL but I'm not sure that can we redirect modulewise as separate 'apex' named subdirectory is created in "dev" then configuration gets effect as how it will work and mod_rewrite option I have seen but can't understand as including one to pick up. Please suggest...

My Version of the apex is 4.2.3

Apex listener Version is 2.0.3

As appropriate, any other information please ask me.

Kind regards

Nitesh Perron.

Dear all,

Finally I found the solution for this.  I put here so that it can be useful to others who may face difficulties like me,.

Floorconstruction:

After changing the root of context just start your deployed war file and test it.

While reaching the URL,

Web page showing "listener apex not configured" and it will show you the location of the configuration on the Web page itself.

Then you simply copy all directories and subdirectories (that were created when you set up your database using the file. War) at the location that shown on the Web page.

As we change the root context so a named directory context root allows to create inside the path configured, if web is unable to find configurations because it happens inside the different directory so just copy everything and try. It worked for me very smoothly.

My position was ' /home/oracle/apex_listener.2.0.3.221.10.13/apex"(before changing the context root in weblogic server).

Then after the change and start the deployment once again, it became ' /home/oracle/apex_listener.2.0.3.221.10.13/dev', since I gave my root of context like "dev."

So here I just copied directory "apex" on the dev directory and it worked fine and I got my desired URL as http://localhost:port/dev/apexhttp://localhostport .

And all applications also works very well.

Still, I felt its not correct way to view security, but this is the solution I found and I will try apache to redirect my URL.

Thank you

Kind regards

Nitesh Perron.

Tags: Database

Similar Questions

  • How to configure the listener with SSL

    Hi Experts,

    I use 11g R2 EE. I want to configure my database listener so that it can be connected using SSL.

    Can someone provide me guide step by step to configure the listener with SSL (including the portfolio so that comes in the image).

    The command line configurations will be well appreciated.

    Thanks in advance

    Alexander gelin

    The client configuration is the same as the server:

    1. create the portfolio.

    2 creating CSR and copy it in CA.

    3. the CSR signal with your certificate root.

    4 copy signed CRT file and root of public certificate to the client.

    5 configure the sqlnet.ora clients.

    Heavy customers already contains the necessary files. For thin clients, it is necessary to install the full or instant client.

    In SQLDeveloper, connection string should be like:

    jdbc:oracle:oci:@(DESCRIPTION= (ADDRESS_LIST= (ADDRESS= (PROTOCOL=TCPS)(HOST=)(PORT=))) (CONNECT_DATA= (SERVICE_NAME=)) (SECURITY= (MY_WALLET_DIRECTORY=D:\Oracle\client.test.p12)))

  • Manually configure the listener apex via command line

    I would like to be able to configure the listener apex via the command line.
    Is there an api or method to achieve this?

    Is it possible to take an apex-config. XML as a template and make changes to this environment and place it in the config.dir directory
    According to me, placing a! in front of the clear text password cryptera apex listener reboot?

    Is the method of model above a taken way in charge of the configuration of the apex listener script languages?

    I set the value of config.dir for /apex_lsnr
    This will search the apex - config.xml in the directory above or it will search the XML in /apex_lsnr/apex?

    +/apex_lsnr + would be option 1 - who doesn'work currently.

    ++ refers to the 'context' you have deployed your APEX listener, so if you used the default value (apex) this would actually
    +/apex_lsnr/apex +.

    -Online cp apex - config.xml $DOMAIN_HOME/apex_lsnr/apex

    Note that APEX auditor records the location of the apex - config.xml, he uses actually started. If it comes to the temporary location (default), he found nothing in your configured directory.

    -Udo

  • Get the ORA-06508 in configuring the listener APEX

    Hello

    I am configuring the listener of the Apex. After entering all required fields and click 'Apply', I get the error messages listed below. This happens when you try the Basic types and connection of the AMT.

    ORA-06508: PL/SQL: called program unit is not found

    Cannot run the Sentinel of the 4500 application page.

    Thanks in advance for your help.

    Published by: user3654649 on June 14, 2011 11:32

    Published by: user3654649 on June 14, 2011 11:33

    Hi Sue,

    It is not a fluke, it certainly works that way.
    Just a few final remarks:
    -He didn't need to change/copy content of + / orabackup_iris2/apex_listener/export/home + to + / orabackup_iris2/export/apex_listener + in your case, as the first directory does not seem to be a temporary.
    -I recommend you put the java call, including parameters in a shell script and call instead.
    - nohup works very well for the background to the application process. As you probably know he does not offer a service 'system' - like functionality.
    - nohup creates a default file for the release of the console in employment has begun. I would recommend to redirect to a file named, then all the outputs.
    So your final configuration would look as follows
    start_apex_listener.sh

    #!/bin/sh
java -Dapex.port=8080 -Dapex.home=/orabackup_iris2/export/apex_listener -Dapex.images=/orabackup_iris2/export/apex/images -jar /orabackup_iris2/export/apex_listener/apex.war

    appeal of nohup

    nohup /orabackup_iris2/export/apex_listener/start_apex_listener.sh >> /orabackup_iris2/export/apex_listener/apex_listener.log 2>&1 &

    If your question answered, please mark this thread and any useful response or good post accordingly.

    -Udo

  • Configuring the listener and Instance registration

    Hello

    I was watching one of the cases that we run on a box and I could not understand how the connections are deployed for this particular case, and I hope someone can enlighten us please...

    We run Solaris 5.10 with two houses of installed oracle 10.2.0.4 and 11.1.0.7, a running instance that:

    Oracle: oracle/home / > ps - ef | grep smon

    Oracle 28299 28048 0 08:31:23 pts/7 0:00 grep smon

    24870 2965 Oracle 0 Jul 17?          ora_smon_dbs 45: 03

    TNS_ADMIN to point to ""/var/opt/oracle ": "

    Oracle: oracle/home / > echo $TNS_ADMIN

    / var/opt/oracle

    I had a look at the directory and there is no file tnsnames.ora:

    Oracle: / var/opt/oracle > ls-l

    Total 7

    -rw - r - r - 1 oracle dba 474 14 April 2014 listener.ora

    -rw - r - r - 1 oracle dba 55 7 March 2014 oraInst.loc

    -rw-rw-r - 1 oracle dba 750 19 Jan 10:33 oratab


    We then looked at the configuration of the listener.ora file, and the SID_NAME does not reference a real SID:


    listener.ora # Network Configuration file: /var/opt/oracle/listener.ora

    # Generated by Oracle configuration tools.

    SID_LIST_LISTENER =

    (SID_LIST =

    (SID_DESC =

    (SID_NAME = PLSExtProc)

    (ORACLE_HOME = appl/oracle/10.2.0)

    (= Extproc PROGRAM)

    )

    )

    LISTENER =

    (DESCRIPTION_LIST =

    (DESCRIPTION =

    (ADDRESS = (PROTOCOL = TCP)(HOST = dbmzsbsdb01.int.un) (PORT = 1521))

    (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC0))

    )

    )


    For awhile, I thought it's ok that we could fix local_listener of the database, but once again if this is the case then I expect to see a file tnsnames.ora with address or list of addresses of listeners specified them then obviously this was not the case and certainly enough, looking at the database local_listener was not established:


    SYS@dbs> show parameter local_list


NAME                                 TYPE        VALUE
------------------------------------ ----------- ------------------------------
local_listener                       string

    I also noticed that we use the listener 10g instead of the 11 g listener, and looking at the processes running, it is certainly the case:


    Oracle: / var/opt/oracle > ps - ef | grep tns

    9384 2965 Oracle 0 Jun 27?          80:37 /appl/oracle/10.2.0/bin/tnslsnr EARPHONE-inherit

    Oracle 2777 26227 0 08:15:50 pts/7 0:00 grep tns


    I'm a little lost on how this database is same! ??? any ideas on what's happening please?


    Thank you


    WebLogic even will need connection strings and you should be able to find them.

    The JDBC thin driver does not use tnsnames.ora and fat jdbc driver can use tnsnames.ora but is not necessary.

    JDBC uses the :: syntax.

    The database registers itself with the listener using the service_name parameter in init or - better - spfileSID.ora

    All this is documented, so not too difficult to find for you,

    ---------------

    Sybrand Bakker

    Senior Oracle DBA

  • Configure the listener for the data protection

    Hello world

    I'm currently caveat of data (physical standby database) for my database. But I have problem to configure the listening port on both servers. Can someone give me some examples?

    Oracle: 10g R2
    Operating systems: Windows
    Database primary ken10g
    backup database: ken10gbk

    Here are the contents of my files current listener on both servers:

    Primary server:

    listener.ora # Network Configuration file: C:\oracle\product\10.2.0\db_1\network\admin\listener.ora
    # Generated by Oracle configuration tools.

    SID_LIST_LISTENER =
    (SID_LIST =
    (SID_DESC =
    (SID_NAME = PLSExtProc)
    (ORACLE_HOME = C:\oracle\product\10.2.0\db_1)
    (= Extproc PROGRAM)
    )
    )

    LISTENER =
    (DESCRIPTION_LIST =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1))
    (ADDRESS = (PROTOCOL = TCP) (HOST =)(PORT = 1521) Primary_server)
    )
    )

    Backup server:

    listener.ora # Network Configuration file: C:\oracle\product\10.2.0\db_1\NETWORK\ADMIN\listener.ora
    # Generated by Oracle configuration tools.

    SID_LIST_LISTENER =
    (SID_LIST =
    (SID_DESC =
    (SID_NAME = PLSExtProc)
    (ORACLE_HOME = C:\oracle\product\10.2.0\db_1)
    (= Extproc PROGRAM)
    )
    )

    LISTENER =
    (DESCRIPTION_LIST =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1))
    )
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = standby_server) (PORT = 1521))
    )
    )

    Thanks in advance.

    Ken

    This should always work on Oracle 10.

    ---------------------------

    Main example

    listener.ora # Network Configuration file: /u01/app/oracle/product/11.2.0/network/admin/listener.ora
    # Generated by Oracle configuration tools.

    LISTENER =
    (DESCRIPTION_LIST =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = host) (PORT = 1521))
    )
    )

    SID_LIST_LISTENER = (SID_LIST = (SID_DESC = (SID_NAME = PRIMARY)
    (ORACLE_HOME=/u01/app/oracle/product/11.2.0)
    (GLOBAL_DBNAME = PRIMARY_DGMGRL. Host)))

    ADR_BASE_LISTENER = / u01/app/oracle

    Example of Eve

    listener.ora # Network Configuration file: /u01/app/oracle/product/11.2.0/network/admin/listener.ora
    # Generated by Oracle configuration tools.

    LISTENER =
    (DESCRIPTION_LIST =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = host) (PORT = 1521))
    )
    )

    SID_LIST_LISTENER = (SID_LIST = (SID_DESC = (SID_NAME = STANDBY)
    (ORACLE_HOME = u01/app/oracle/product/11.2.0)
    (GLOBAL_DBNAME = STANDBY_DGMGRL. Host)))

    ADR_BASE_LISTENER = / u01/app/oracle

  • Configuring the listener

    After installing frash DB
    Configure the listener as follows,

    LISTENER =
    *(DESCRIPTION_LIST =*)
    *(DESCRIPTION =*)
    * (ADDRESS = (PROTOCOL = TCP) (HOST = Desktop029.tvsil.com)(PORT = 1521)) *.

    *)*
    *)*

    SID_LIST_ORCL =
    *(SID_LIST =*)
    *(SID_DESC =*)
    * (GLOBAL_DBNAME = ORCL). *
    * (ORACLE_HOME = D:\oracle1\product\10.2.0)*
    * (SID_NAME = ORCL). *
    *)*
    *)*


    ORCL =
    *(DESCRIPTION_LIST =*)
    *(DESCRIPTION =*)
    * (ADDRESS = (PROTOCOL = TCP) (HOST = Desktop029.tvsil.com)(PORT = 1521)) *.
    *)*
    *)*



    AMT I configured


    + tnsnames.ora # Network Configuration file: D:\oracle1\product\10.2.0\db_1\NETWORK\ADMIN\tnsnames.ora+
    + # Generated by Oracle configuration tools. +


    ORCL =
    + (DESCRIPTION = +
    + (ADDRESS_LIST = +
    + (ADDRESS = (PROTOCOL = TCP) (HOST = Desktop029.tvsil.com)(PORT = 1521)) +.
    +)+
    + (CONNECT_DATA = +
    + (SERVER = DEDICATED) +.
    + (Service_name = ORCL) +.
    +)+
    +)+

    EXTPROC_CONNECTION_DATA =
    + (DESCRIPTION = +
    + (ADDRESS_LIST = +
    + (ADDRESS = (PROTOCOL = TCP) (HOST = Desktop029.tvsil.com)(PORT = 1521)) +.
    +)+
    + (CONNECT_DATA = +
    + (SID = PLSExtProc) +.
    + (PRESENTATION = RO) +.
    +)+
    +)+

    When you start the listener
    I got following error


    + Microsoft Windows XP [Version 5.1.2600] +.
    -(C) copyright 1985-2001 Microsoft Corp. +.

    C:\Documents and Settings\karthick.a > cd\

    C:\ > lsnrctl status

    LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on March 11, 2010 16:08
    +: 37 +.

    Copyright (c) 1991, 2005, Oracle.  All rights reserved.

    Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP) (HOST = Desktop029.tvsil.com) (IN.
    RT = 1521)))
    AMT-12541: TNS:no listener
    AMT-12560: TNS:protocol adapter error
    AMT-00511: no listener
    + 32-bit Windows Error: 61: unknown error.


    the people of u can help me

    Check services Controlpanel listening >
    Are they automatic or manual has started or not.

  • SID and the name of the Service on Weblogic Server

    Dear,
    My question is related to the Data Source, when I create a new source of data weblogic server version 10.3.6.0, I have the name of the database as SID not Service name.
    When I put the name of the database in the SID of the error below will appear:

    Test failed: listener refused the connection with the following error:
    ORA-12505, TNS:listener is not currently of SID given in connect descriptor

    My question is weblogic server version 10.3.6.0 take the name of the database as SID? or there is a way to use the database SID weblogic server version 10.3.6.0 user?

    Now I test the name of database on Jdeveloper Version 11.1.1.4.0 and create the new connection to database as below:
    1 - when I choose the SID, the error above is
    2. when I choose the name of Service everything works correctly.

    Now I need put the user weblogic server version 10.3.6.0 as SID to be pass and continue working on my project.

    Thank you 
    $ oerr ora 12505
12505, 00000, "TNS:listener does not currently know of SID given in connect descriptor"
// *Cause:  The listener received a request to establish a connection to a
// database or other service. The connect descriptor received by the listener
// specified a SID for an instance (usually a database instance) that either
// has not yet dynamically registered with the listener or has not been
// statically configured for the listener. This may be a temporary condition
// such as after the listener has started, but before the database instance
// has registered with the listener.
// *Action:
//  - Wait a moment and try to connect a second time.
//  - Check which instances are currently known by the listener by executing:
//    lsnrctl services 
//  - Check that the SID parameter in the connect descriptor specifies
//    an instance known by the listener.
//  - Check for an event in the listener.log file.
$

    Thank you for posting the connection string you use and, since the database server, the result of "lsnrctl services."

  • How to know the version of the built-in weblogic Server

    Hi experts,

    use jdev11.1.1.5.0

    I h had big doubt ;)

    How to know the version of the built-in weblogic Server

    I think I'm using weblogic10.1.3. but am not sure?

    so, how can I found out.

    This diary. but I don't see any information on the version.
    *** Using port 7101 ***
"C:\Documents and Settings\Administrator\Application Data\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\bin\startWebLogic.cmd"
[waiting for the server to complete its initialization...]
.
.
JAVA Memory arguments: -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m  -XX:MaxPermSize=512m
.
WLS Start Mode=Development
.
CLASSPATH=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jdbc_11.1.1\ojdbc6dms.jar;C:\Oracle\MIDDLE~1\patch_wls1035\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\JDK160~1\lib\tools.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic_sp.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.jar;C:\Oracle\MIDDLE~1\modules\features\weblogic.server.modules_10.3.5.0.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\webservices.jar;C:\Oracle\MIDDLE~1\modules\ORGAPA~1.1/lib/ant-all.jar;C:\Oracle\MIDDLE~1\modules\NETSFA~1.0_1/lib/ant-contrib.jar;C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrf.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\common\derby\lib\derbyclient.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\xqrl.jar
.
PATH=C:\Oracle\MIDDLE~1\patch_wls1035\profiles\default\native;C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\native;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\bin;C:\Oracle\MIDDLE~1\modules\ORGAPA~1.1\bin;C:\Oracle\MIDDLE~1\JDK160~1\jre\bin;C:\Oracle\MIDDLE~1\JDK160~1\bin;C:\DevSuiteHome_1\jdk\jre\bin\classic;C:\DevSuiteHome_1\jdk\jre\bin;C:\DevSuiteHome_1\jdk\jre\bin\client;C:\DevSuiteHome_1\jlib;C:\DevSuiteHome_1\bin;C:\DevSuiteHome_1\jre\1.4.2\bin\client;C:\DevSuiteHome_1\jre\1.4.2\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32\oci920_8
.
***************************************************
*  To start WebLogic Server, use a username and   *
*  password assigned to an admin-level user.  For *
*  server administration, use the WebLogic Server *
*  console at http:\\hostname:port\console        *
***************************************************
starting weblogic with Java version:
java version "1.6.0_24"
Java(TM) SE Runtime Environment (build 1.6.0_24-b50)
Java HotSpot(TM) Client VM (build 19.1-b02, mixed mode)
Starting WLS with line:
C:\Oracle\MIDDLE~1\JDK160~1\bin\java -client   -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m  -XX:MaxPermSize=512m -Dweblogic.Name=DefaultServer -Djava.security.policy=C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.policy -Djavax.net.ssl.trustStore=C:\Oracle\Middleware\wlserver_10.3\server\lib\DemoTrust.jks -Duser.timezone="+05:30" -Dweblogic.nodemanager.ServiceEnabled=true  -Xverify:none  -da -Dplatform.home=C:\Oracle\MIDDLE~1\WLSERV~1.3 -Dwls.home=C:\Oracle\MIDDLE~1\WLSERV~1.3\server -Dweblogic.home=C:\Oracle\MIDDLE~1\WLSERV~1.3\server  -Djps.app.credential.overwrite.allowed=true -Dcommon.components.home=C:\Oracle\MIDDLE~1\ORACLE~1 -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Ddomain.home=C:\DOCUME~1\ADMINI~1\APPLIC~1\JDEVEL~1\SYSTEM~1.13\DEFAUL~1 -Djrockit.optfile=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrocket_optfile.txt -Doracle.server.config.dir=C:\DOCUME~1\ADMINI~1\APPLIC~1\JDEVEL~1\SYSTEM~1.13\DEFAUL~1\config\FMWCON~1\servers\DefaultServer -Doracle.domain.config.dir=C:\DOCUME~1\ADMINI~1\APPLIC~1\JDEVEL~1\SYSTEM~1.13\DEFAUL~1\config\FMWCON~1  -Digf.arisidbeans.carmlloc=C:\DOCUME~1\ADMINI~1\APPLIC~1\JDEVEL~1\SYSTEM~1.13\DEFAUL~1\config\FMWCON~1\carml  -Digf.arisidstack.home=C:\DOCUME~1\ADMINI~1\APPLIC~1\JDEVEL~1\SYSTEM~1.13\DEFAUL~1\config\FMWCON~1\arisidprovider -Doracle.security.jps.config=C:\DOCUME~1\ADMINI~1\APPLIC~1\JDEVEL~1\SYSTEM~1.13\DEFAUL~1\config\fmwconfig\jps-config.xml -Doracle.deployed.app.dir=C:\DOCUME~1\ADMINI~1\APPLIC~1\JDEVEL~1\SYSTEM~1.13\DEFAUL~1\servers\DefaultServer\tmp\_WL_user -Doracle.deployed.app.ext=\- -Dweblogic.alternateTypesDirectory=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.ossoiap_11.1.1,C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.oamprovider_11.1.1 -Djava.protocol.handler.pkgs=oracle.mds.net.protocol  -Dweblogic.jdbc.remoteEnabled=false -Dwsm.repository.path=C:\DOCUME~1\ADMINI~1\APPLIC~1\JDEVEL~1\SYSTEM~1.13\DEFAUL~1\oracle\store\gmds   -Dweblogic.management.discover=true  -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=C:\Oracle\MIDDLE~1\patch_wls1035\profiles\default\sysext_manifest_classpath;C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\sysext_manifest_classpath  weblogic.Server
<Feb 17, 2012 5:50:39 AM GMT> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true> 
<Feb 17, 2012 5:50:39 AM GMT> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true> 
<Feb 17, 2012 5:50:39 AM GMT> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) Client VM Version 19.1-b02 from Sun Microsystems Inc.> 
<Feb 17, 2012 5:50:40 AM GMT> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.5.0  Fri Apr 1 20:20:06 PDT 2011 1398638 > 
<Feb 17, 2012 5:50:42 AM GMT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING> 
<Feb 17, 2012 5:50:42 AM GMT> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool> 
<Feb 17, 2012 5:50:42 AM GMT> <Notice> <LoggingService> <BEA-320400> <The log file C:\Documents and Settings\Administrator\Application Data\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.> 
<Feb 17, 2012 5:50:42 AM GMT> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to C:\Documents and Settings\Administrator\Application Data\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log00220. Log messages will continue to be logged in C:\Documents and Settings\Administrator\Application Data\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log.> 
<Feb 17, 2012 5:50:42 AM GMT> <Notice> <Log Management> <BEA-170019> <The server log file C:\Documents and Settings\Administrator\Application Data\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log is opened. All server side log events will be written to this file.> 
<Feb 17, 2012 5:50:48 AM GMT> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.> 
<Feb 17, 2012 5:50:50 AM GMT> <Notice> <LoggingService> <BEA-320400> <The log file C:\Documents and Settings\Administrator\Application Data\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\access.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.> 
<Feb 17, 2012 5:50:50 AM GMT> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to C:\Documents and Settings\Administrator\Application Data\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\access.log00102. Log messages will continue to be logged in C:\Documents and Settings\Administrator\Application Data\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\access.log.> 
<Feb 17, 2012 5:50:56 AM GMT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY> 
<Feb 17, 2012 5:50:56 AM GMT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING> 
<MessageLocalizationHelper> <getLocalizedMessage> The resource for bundle "oracle.jrf.i18n.MBeanMessageBundle" with key "oracle.jrf.JRFServiceMBean.checkIfJRFAppliedOnMutipleTargets" cannot be found.
<Feb 17, 2012 5:51:02 AM GMT> <Warning> <J2EE> <BEA-160195> <The application version lifecycle event listener oracle.security.jps.wls.listeners.JpsAppVersionLifecycleListener is ignored because the application GeneralLedger is not versioned.> 
<Feb 17, 2012 5:51:07 AM GMT> <Warning> <J2EE> <BEA-160195> <The application version lifecycle event listener oracle.security.jps.wls.listeners.JpsAppVersionLifecycleListener is ignored because the application Rapppdf is not versioned.> 
<Feb 17, 2012 5:51:27 AM GMT> <Notice> <LoggingService> <BEA-320400> <The log file C:\Documents and Settings\Administrator\Application Data\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.> 
<Feb 17, 2012 5:51:27 AM GMT> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to C:\Documents and Settings\Administrator\Application Data\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log00208. Log messages will continue to be logged in C:\Documents and Settings\Administrator\Application Data\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log.> 
<Feb 17, 2012 5:51:27 AM GMT> <Notice> <Log Management> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.> 
<Feb 17, 2012 5:51:27 AM GMT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN> 
<Feb 17, 2012 5:51:27 AM GMT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING> 
<Feb 17, 2012 5:51:27 AM GMT> <Warning> <Server> <BEA-002611> <Hostname "rmsys0061", maps to multiple IP addresses: 192.168.0.161, 192.168.2.161> 
<Feb 17, 2012 5:51:27 AM GMT> <Notice> <Server> <BEA-002613> <Channel "Default[2]" is now listening on 127.0.0.1:7101 for protocols iiop, t3, ldap, snmp, http.> 
<Feb 17, 2012 5:51:27 AM GMT> <Notice> <Server> <BEA-002613> <Channel "Default[1]" is now listening on 192.168.2.161:7101 for protocols iiop, t3, ldap, snmp, http.> 
<Feb 17, 2012 5:51:27 AM GMT> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 192.168.0.161:7101 for protocols iiop, t3, ldap, snmp, http.> 
<Feb 17, 2012 5:51:27 AM GMT> <Notice> <WebLogicServer> <BEA-000331> <Started WebLogic Admin Server "DefaultServer" for domain "DefaultDomain" running in Development Mode> 
<Feb 17, 2012 5:51:27 AM GMT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING> 
<Feb 17, 2012 5:51:27 AM GMT> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode> 
IntegratedWebLogicServer startup time: 51640 ms.
IntegratedWebLogicServer started.
[Running application frmtesting on Server Instance IntegratedWebLogicServer...] 
[11:21:30 AM] ----  Deployment started.  ----
[11:21:30 AM] Target platform is  (Weblogic 10.3).
[11:21:31 AM] Retrieving existing application information
[11:21:31 AM] Running dependency analysis...
[11:21:31 AM] Deploying 2 profiles...
[11:21:32 AM] Wrote Web Application Module to C:\Documents and Settings\Administrator\Application Data\JDeveloper\system11.1.1.5.37.60.13\o.j2ee\drs\frmtesting\ViewControllerWebApp.war
[11:21:32 AM] Wrote Enterprise Application Module to C:\Documents and Settings\Administrator\Application Data\JDeveloper\system11.1.1.5.37.60.13\o.j2ee\drs\frmtesting
[11:21:32 AM] Deploying Application...
<Feb 17, 2012 5:51:33 AM GMT> <Warning> <J2EE> <BEA-160195> <The application version lifecycle event listener oracle.security.jps.wls.listeners.JpsAppVersionLifecycleListener is ignored because the application frmtesting is not versioned.> 
[11:21:40 AM] Application Deployed Successfully.
[11:21:40 AM] The following URL context root(s) were defined and can be used as a starting point to test your application:
[11:21:40 AM] http://192.168.0.161:7101/frmtesting-ViewController-context-root
[11:21:40 AM] Elapsed time for deployment:  11 seconds
[11:21:40 AM] ----  Deployment finished.  ----
Run startup time: 10812 ms.
[Application frmtesting deployed to Server Instance IntegratedWebLogicServer]

Target URL -- http://127.0.0.1:7101/frmtesting-ViewController-context-root/faces/untitled6.jspx
    http://127.0.0.1:7101/console/login/LoginForm.jsp. He said that the administration weblogicserver 11g console

    At the base (copy of right section) 10.3.5.0

    11.1.1.5 JDev will use WLS 10.3.5 as its built-in Server

  • Configuring the listener pending side before running the RMAN DUPLICATE

    Version: 11.2.0.3
    Platfomrm: Solaris 10

    We will create a DB physical standby for our primary database using RMAN Duplicate.

    Our primary DB details
    DB_NAME          = ADPTGMS
DB_UNIQUE_NAME     = ADPTGMS
    Names for standby
    DB_NAME          = ADPTGMS
DB_UNIQUE_NAME     = ADPTGMSDG
    Question1.
    Next to the day before, before I run the duplicate RMAN, I need so that it starts the empty instance in NOMOUNT State. Right? Can I configure export ORACLE_SID DB_NAME or DB_UNIQUE_NAME?

    Question2.


    I understand that it is a precondition not to have the listener towards the top pending side make the RMAN Duplicate (otherwise how RMAN will connect to the dummy instance in the side standy)
    Next to Eve, there is no DB turns again. But for the RMAN to connect to the Instance of a model, I configured and started a listener as shown below. Is this really?
    $ cat listener.ora
# listener.ora Network Configuration File: /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
# Generated by Oracle configuration tools.

LISTENER_DG =
  (DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = TCP)(HOST = 10.80.16.179)(PORT = 1524 ))
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC2012))
    )
  )
$
$
$
$ lsnrctl start LISTENER_DG

LSNRCTL for Solaris: Version 11.2.0.3.0 - Production on 20-DEC-2012 00:14:19

Copyright (c) 1991, 2011, Oracle.  All rights reserved.

Starting /u01/app/oracle/product/11.2.0/dbhome_1/bin/tnslsnr: please wait...

TNSLSNR for Solaris: Version 11.2.0.3.0 - Production
System parameter file is /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
Log messages written to /u01/app/oracle/diag/tnslsnr/tigris179/listener_dg/alert/log.xml
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=10.80.16.179)(PORT=1524)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC2012)))

Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=10.80.16.179)(PORT=1524)))
STATUS of the LISTENER
------------------------
Alias                     LISTENER_DG
Version                   TNSLSNR for Solaris: Version 11.2.0.3.0 - Production
Start Date                20-DEC-2012 00:14:24
Uptime                    0 days 0 hr. 0 min. 3 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Listener Parameter File   /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
Listener Log File         /u01/app/oracle/diag/tnslsnr/tigris179/listener_dg/alert/log.xml
Listening Endpoints Summary...
  (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=10.80.16.179)(PORT=1524)))
  (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC2012)))
The listener supports no services
The command completed successfully

    Hello

    The link I gave in my previous post features a display of very good example:

    Primary:

    Pfile/Spfile name: initprim.ora/spfileprim.ora
db_name=prim
db_unique_name=prim

    Standby time:

    Pfile/Spfile name: initstnd.ora/spfilestnd.ora
db_name=prim
db_unique_name=stnd

    In your case:

    While adding a static entry to the listener of the day before, SID_NAME should be the DB_UNIQUE_NAME of the database pending. Also the pfile/spfile Eve must be associated with the DB_UNIQUE_NAME of the previous day.

    The pending database ORACLE_SID would be the DB_UNIQUE_NAME of the database pending. Hope that's clear!

    Kind regards
    Shivananda

  • problem configuring the listener

    Hello
    I followed all the steps of the doc, how to install with Oracle Glassfish server: http://docs.oracle.com/cd/E21611_01/ doc.11 /e21058/install.htm#CHDBIAIF
    I created these 2 users, of adminlistener and of managerlistener, in the 'file' subnode and giving them a password.
    Then, I deployed the apex-listener directory apex.war.

    I have a problem here:


    Oracle Application Express listener Administration access

    To access Oracle Application Express listener Administration, in your Web browser, go to:

    http:// < Host >: < port >/apex/listenerConfigure

    Where:

    * < Host > is the DNS name or IP address of the Administration Server *.

    * < port > is the port for listening on which the Administration Server is listening for requests

    Next, configure the Oracle Application Express Listener. See "Configuring Oracle Application Express Listener."

    OK, we will set up then.
    I entered apex / http://127.0.0.1:4848 / listenerConfigure and opening of the Glassfish Server Administration Console, asking me a name of user and password. I think I should connect with the previously created the username with the role of the Admin (adminlistener). When I try to open a session with adminlistener and the password, it is said:

    Failed authentication
    Re-enter your username and password

    The password entered ok. What I am doing wrong and how do I configure glassfish console listener?
    Thank you

    Published by: Roger22 on 10.09.2012 23:40

    Hi Roger,
    Pay attention to these lines
    >
    To access Oracle Application Express listener Administration, in your Web browser, go to:

    http://:/apex/listenerConfigure

    Where:

    is the DNS name or IP address of the Management Server

    is the listening port on which the Administration Server is listening to the requests

    Next, configure the Oracle Application Express Listener. See "Configuring Oracle Application Express Listener."

    >

    The PORT here refers to the HTTP port of the http-auditeur1 under configuration > network config > network listeners > http-listener-1 > Port. The default value is 8080.

    If you use the default ports then your URL will be

    http://127.0.0.1:8080/apex/listenerConfigure

    4848 port is used only for Glassfish domain administration console.

    Before go you about setting up Apexlistener please pin the location of the config.xml file - apex in the Web.XML by UN-comment lines

     
config.dir
${java.io.tmpdir}/APEX

    And replace the ${java.io.tmpdir} with a hardcoded fully qualified path, for example the same path than the web.xml file.

    If you do not pin the location of the config.XML - apex as shown above, we can expect more posts of your associates "apexlistener suddenly stopped listening" ;)

    See you soon,.

  • Configuring the listener on windows

    Dear professionals,

    I am a beginner in Oracle...

    I know my problem seems weird, I have read many articles and oracle both documents nothing helped... Please give suggestion. You'll make my day.

    I have two servers (192.168.2.22 and 192.168.2.11) windows, I installed Oracle 11 g R2 on both machines

    Name of the data base: PROD - 192.168.2.22

    Name of the data base: CATDB - 192.168.2.11

    Directory > sqlplus "virtue sysdba".

    SQL * more: Production version 11.2.0.1.0 on Fri Jan 31 16:29:15 2014

    Copyright (c) 1982, 2010, Oracle.  All rights reserved.

    Connected to:

    Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production

    With partitioning, OLAP, Data Mining and Real Application Testing options

    SQL > select name from v$ database;

    NAME

    ---------

    PROD

    Directory > sqlplus "virtue sysdba".

    SQL * more: Production version 11.2.0.1.0 on Fri Jan 31 16:32:21 2014

    Copyright (c) 1982, 2010, Oracle.  All rights reserved.

    Connected to:

    Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production

    With partitioning, OLAP, Data Mining and Real Application Testing options

    SQL > select name from v$ database;

    NAME

    ---------

    CATDB

    Now I want to access examples Catdb 192.168.2.22 Server (where created database of PROD) want the same access to 192.168.2.11 Prod database server (where CATDB database created)

    I'm catdb capable of pinging the server from prod, also able ping server Prod catdb Server server. (using the ping OS utility)

    I created (manually and using NETCA) Auditors and copied to another server tnsnames.ora file nothing helped... Now, I have deleted all entries in tnsnames.ora and listener.ora.

    I am able to connect locally but not able to connect remotely.

    Can someone suggest a solution with the necessary steps (ENTRANCES of TNS) which will help me.

    Thank you

    DBA. Sagar says:

    Cannot create local Stanley? I don't have access from anywhere in the world. I just want to get to the office... All servers in my office using the same internet and installed oracle 11 g client.

    I want to just access database to another PC that are in my office... Please let me know.

    Thank you

    The auditor must use routable IP # or host name which translates an IP routable # to any other system to exchange packets with it.

    When the HOST = localhost or HOST = 127.0.0.1, so this system can & will never speak to himself.

    What are your systems & you are free to configure any way you consider appropriate.

    Contact your local network administrator.

  • Configuring the listener and other issues

    I installed 2 instances of database on the same database and the same house database.
    Instances use the same listener. If I try to start the business manager in the browser for both instances,
    Enterprise Manager starts just to the last installed instance. I edited the listener.ora one file
    Add a Description more with another port number as follows:

    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP) (HOST = merge)(PORT = 1522))
    )



    for the following content:

    LISTENER_APPDB =
    (DESCRIPTION_LIST =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP) (HOST = merge)(PORT = 1521))
    (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1521))
    )
    )

    now the file looks similar to the following:


    LISTENER_APPDB =
    (DESCRIPTION_LIST =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP) (HOST = merge)(PORT = 1521))
    (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1521))
    )
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP) (HOST = merge)(PORT = 1522))
    )
    )

    ADR_BASE_LISTENER_APPDB = D:\app\oracle2

    SID_LIST_LISTENER_APPDB =
    (SID_LIST =
    (SID_DESC =
    (SID_NAME = CLRExtProc)
    (ORACLE_HOME = D:\app\oracle2\product\11.2.0\dbhome_1)
    (= Extproc PROGRAM)
    (ENVS = "EXTPROC_DLLS=ONLY:D:\app\oracle2\product\11.2.0\dbhome_1\bin\oraclr11.dll")
    )
    )

    I also changed the port of one of the instances in the file tnsnames.ora from 1521 to 1522.
    It is now possible to launch Enterprise Manager in both cases. But after I connect to one of the
    bodies with Enterprise Manager from the logs of the other instance. Is it ok then? Will I have problems
    with this configuration? Should I do something different?

    Second question: if I installed an instance during installation, some patches where
    automatically installed. After that, I installed another instance. Do I have to patch this body too?
    Are the hotfixes installed for the DBMS together or just for a single instance?

    * Third question: if I have 2 case how can I set the parameter btree_bitmap_plans for only *.
    one of the instances? I found the following code to do this:

    ALTER SYSTEM SET "_b_tree_bitmap_plans" = false SCOPE = SPFILE;

    but for which the instance parameter will be defined for both or just one? What I have to choose
    one of the instances? How can I do?

    Published by: 995273 on 21.03.2013 02:49

    Set oracle_sid = your_db_name

    then, in SQL, use command below

    ALTER SYSTEM SET "_b_tree_bitmap_plans" = false SCOPE = SPFILE;

    Do you have any recommendations for the Support of Oracle to use?

  • ANALYZE the Configuring the listener

    Hello

    Im trying to create the emca for my rac db repository but his failling with this error... Invalid username/password or the data/analysis not high listener or database service is not registered with listener to scan.


    EMCA - config dbcontrol db-rest create - cluster

    EMCA STARTED may 3, 2010 12:44:27
    Configuration MS Assistant, Production of the Version 11.2.0.0.2
    Copyright (c) 2003, 2005, Oracle. All rights reserved.

    Enter the following information:
    Unique name of database: test
    Service name: test.domain.com
    Listener port number: 1529
    Listener ORACLE_HOME [/ u01/app/grid01]:
    User SYS password:
    User DBSNMP password:
    SYSMAN user password:
    Name of the cluster: test-cluster
    E-mail address for notifications (optional):
    Server of Mail (SMTP) out for notifications (optional):
    ASM ORACLE_HOME [/ u01/app/grid01]:
    ASM port [1529]:
    ASM username [ASMSNMP]:
    ASM user password:
    Invalid username/password or the data/analysis not high listener or database service is not registered with listener to scan.

    status of the listener:


    ------------------------
    Alias LISTENER
    Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
    Beginning of May 3, 2010 12:22:32
    Uptime 0 days 1 hour 35 min 17 s
    Draw level off
    Security ON: OS Local Authentication
    SNMP OFF
    Parameter Listener of the /u01/app/grid01/network/admin/listener.ora file
    The listener log file /U01/app/grid01/diag/tnslsnr/Node1/listener/alert/log.XML
    Summary of endpoints listening...
    (DESCRIPTION = (ADDRESS = (PROTOCOL = ipc) (KEY = LISTENER)))
    (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp (PORT = 1527))(HOST=127.0.0.1)))
    (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp (PORT = 1529))(HOST=132.17.186.21)))
    Summary of services...
    Service '+ ASM' a 1 instance (s).
    Instance '+ ASM1' READY State, has 1 operation for this service...
    Service 'test' has 1 instance (s).
    Instance "testa", status UNKNOWN, has 1 operation for this service...
    Service 'PLSExtProc' has 1 instance (s).
    Instance of 'PLSExtProc', status UNKNOWN, has 1 operation for this service...
    The command completed successfully

    listener to Scan:

    LSNRCTL for Linux: Version 11.2.0.1.0 - Production on May 3, 2010 13:59:29

    Copyright (c) 1991, 2009, Oracle. All rights reserved.

    Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = IPC) (KEY = LISTENER_SCAN1)))
    STATUS of the LISTENER
    ------------------------
    Alias listener_scan1
    Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
    Beginning of May 3, 2010 12:20:48
    Uptime 0 days 1 hour 38 min 41 s
    Draw level off
    Security ON: OS Local Authentication
    SNMP OFF
    Parameter Listener of the /u01/app/grid01/network/admin/listener.ora file
    The listener log file /U01/app/grid01/diag/tnslsnr/Node1/listener_scan1/alert/log.XML
    Summary of endpoints listening...
    (DESCRIPTION = (ADDRESS = (PROTOCOL = ipc) (KEY = LISTENER_SCAN1)))
    (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp (PORT = 1529))(HOST=132.17.186.29)))
    Summary of services...
    Service 'test.domain.com' has 1 instance (s).
    Instance "testa", State LOAN, has 1 operation for this service...
    Service 'testXDB.domain.com' has 1 instance (s).
    Instance "testa", State LOAN, has 1 operation for this service...
    The command completed successfully


    I can connect to the db through scan (only using the testxdb.domain.com and not the test.domain.com).

    sqlplus sys / as sysdba pass@test-cluster-scan:1529/testxdb.domain.com (this works)

    but this one fails

    sqlplus sys / as sysdba pass@test-cluster-scan:1529/test.domain.com (this works)


    SQL * more: Production version 11.2.0.1.0 on Mon May 3 14:03:51 2010

    Copyright (c) 1982, 2009, Oracle. All rights reserved.

    ERROR:
    ORA-12516: TNS:listener could not find Manager available with the corresponding protocol
    battery


    Enter the user name:

    Please read:

    question of access scan 11 GR 2

    Where to configure the SCAN address?

    Concerning
    Rajesh

  • With regard to access to the URL parameters of the form oracle on the duration

    Hello

    I use form oracle 10g and I just want to know, is it possible to access URL parameters in the form of oracle on the time of execution in the form code.
    I'll illustrate the problem in depth.

    For example:
    I have an abc.fmb form and when I compile it and run it. It will be opened in a browser with the following link

    http://172.12.51.10:7778/forms/frmservlet? config = pkamble

    Now, I want to access or I want to perform a task based on the URL config part just after the '?' mark the sign inside the code of abc.fmb

    So, I'm curious to know any suggestion here of your elders.

    I tried to find the same using the code block within the abc.fmb following the shutter button one time new form instance

    If (: PARAMETER.config = "pkamble") then

    message ("Hi Pkamble");

    end if;

    I get an error saying that Bad Bind variable 'PARAMETER.config '.

    Please suggest here.

    I'd appreciate the help! :)

    Try it
    MESSAGE (GET_APPLICATION_PROPERTY (CONFIG));
    MESSAGE(' ');

Maybe you are looking for

  • Airport Extreme - poor score from Consumer Reports

    In the notes of June 2016 of routers by Consumer Reports, the Apple Airport Extreme was ranked 7th of 14 rated routers. Linksys (EA8500) AC260 ranked 1st with an overall Score of 89 The Apple Airport Extreme ME918LL/A 7th place with an overall score

  • tabs under favorite bar Fx29

    Hello:I upgraded to Fx29, and I can't work out how to get my tabs back below my bookmark bar as I had before. If you can help me, that would be fantastic!Thank you

  • two inputs and two outputs

    create a VI that will acquire temp and pressure for 10 seconds every 500ms. The thermal strain developed and output quantity is given then:stress = 100 * temp + 6 * pressure;output = 500 + temp * 0.1 + pressure * 10;draw the stress and output tempera

  • How can I repair brush for windos xp, no work and lack?

    brush for windos xp missed, how can get it back?

  • Need help with vault

    Hello everyone. San about flash drive I bought 2 years ago or not. I used the program secureaccess (Vault). Then I put some files it contains. I opened not for a long time after though. I just remember that the files I had were important to me. So I