Line number in the PivotTable
Hi allHow can I add line number in PivotTable? I tried with the County, but it does not work.
Thank you
The columns that I used to test are class channel, quantity sold, etc. Obviously, you are not familiar with the sales sample, SH. model
Class channel values direct, indirect and secondly, as I put it in the part of the column of the pivot.
Concerning
Goran
http://108obiee.blogspot.com
Tags: Business Intelligence
Similar Questions
-
Hello
I work with MRS 4.1 and trying to customizations ip configuration for my virtual machines guests on the recovering site (approx. 100 guests). I've updated the CSV (generated from the order of Dr. - ip - customizer.exe) with all the necessary network information. But when I try and upload it to my site SRM recovery server, I get the following error:
Error on line number '17': the number of columns specified is incorrect.
Is the command I use to download: Dr. - ip - customizer.exe - cfg... create csv - c:\srmip.csv - cmd \config\vmware-Dr.xml
I found that if I change the csv file so that it contains 16 lines or less it downloads very well. I have not read on any limitation of the number of rows in the csv file might contain so I think that there is a configuration that causes this behavior, but I can't figure out what that/where it is. Any help would be greatly appreciated.
Thank you.
Hello
something is wrong with your file formatting. A look at the image as an attachment. From the server6 (line 17) do not have the lines "," (comma) at the end of the line (and so less columns):
If I take your file and then open in Excel and save it without changing anything, all lines have ',' (comma).
Probably something wrong with the way in which you save the files (Excel throws several warnings when you try to save the file in the csv format, you have to press 'Yes').
Michael.
-
How to automatically add the line number in the query
Hello
Can anyone please glimpses me the path to achieve this?
I want to write a query that will search the record based on the line number in the result set.
Let's say I have 500 rows in the employee table, but I want to put a condition on request where will see record only between 100 to 200 line number in the result set.
Thank you
Madam.It is wrong to say that look for the lines between ROWNUM 100 to 200 unless you define a column of lines must be ordered.
Oracle does not guarantee that the lines will be be returned in the same order if you run the query several times without defining the ORDER BY clause.
So first decide on what columns you want to order the files and then use the rownum to assign the line number and then get the records you want.
something like that
SQL>SELECT * 2 FROM ( SELECT e.* 3 ,ROW_NUMBER() OVER (ORDER BY sal) row_num 4 FROM emp e 5 ) 6 WHERE row_num BETWEEN 5 AND 10; EMPNO ENAME JOB MGR HIREDATE SAL COMM DEPTNO ROW_NUM ---------- ---------- --------- ---------- --------- ---------- ---------- ---------- ---------- 7654 MARTIN SALESMAN 7698 28-SEP-81 1250 1400 30 5 7934 MILLER CLERK 7782 23-JAN-82 1300 10 6 7844 TURNER SALESMAN 7698 08-SEP-81 1500 0 30 7 7499 ALLEN SALESMAN 7698 20-FEB-81 1600 300 30 8 7782 CLARK MANAGER 7839 09-JUN-81 2450 10 9 7698 BLAKE MANAGER 7839 01-MAY-81 2850 30 10 6 rows selected. SQL>
Concerning
Arun -
How to display the line number in the form?
Hi guys,.
First I fll you in the story so far...
I have a block of data in database named: V_PAYUPLOADHEADER_HP, in the property palette I put in order by facility and warehouse.
I want to display the line number for each record of recoveries, so I do: V_PAYUPLOADHEADER_HP. NUMB, which will contain the line number.
Here are some methods I've already tried:
-First I tried to make a database of field element = O, column name = ROWNUM.
The result is the jump of integer (1, 2, 5, 3, 4 etc. instead of 1, 2, 3, 4, 5) I think it is because of the agenda that I set.
I have to keep this order by setting, so I look for another way to display the rownum.
-Then I tried to set the data item = N, column name = null, mode of calculation = formula, formula =: system.trigger_record.
When I run the value of: V_PAYUPLOADHEADER_HP. NUMB is 1. For all recovered records is 1, 1, 1, 1 instead of 1, 2, 3, 4.
-J' also tried to use the trigger after QUERY attached to the block.
In relaxation, I have this code:
: V_PAYUPLOADHEADER_HP. NUMB: =: system.cursor_record;
When I run the value of: V_PAYUPLOADHEADER_HP. NUMB is 1. For all recovered records is 1, 1, 1, 1 instead of 1, 2, 3, 4...
Is there something I missed?
What can I do to display the rownum?Hello
Maintain this point NON-base of DATA and create a trigger on the block called after REQUEST level and use the code below...:FIELD_NAME:=:SYSTEM.TRIGGER_RECORD;
-Clément
-
Get the line number of the selected text
Hi all
Please tell me how to get the row number of the selected text in a page.
for example
Look, here's the page with text, I want to get the number of the line of the selected one (marked in red) text
|-------------------------|
| XXXXXXXXXXXXXX.
| XXXXXXXXXX |
| XXXXXXXXXXXXXX.| xxxxxxxxxxxxxx |
| XXXXXXXXXX |
| XXXXXXXXXXXXXX.
| XXXXXXXXXXXXXX.
---------------------------
Thanks in advance
Shiv
Hi Shiv,
This thread of extraction. This will give you an idea.
Always search the forum first before creating a new.
Shonky
-
How to get the line number in the line itself in the Sql query?
Hello
I pick up some lines of a sql query. Is it possible to get line number in each line while all lines are read?
Like this:
RowNum data1 data2
1 abc era
2 NBH ioiYes.
ROWNUM
http://download.Oracle.com/docs/CD/E11882_01/server.112/e17118/pseudocolumns009.htm#SQLRF00255
select rownum, data1, data2 from yourtable;
-
Satellite A100 - line number on the keyboard does not work when you enter the password
I have an A100 / Pro A100 series satellite laptop, what ever that means.
Anyway, when you turn the laptop on and asked for a password, I am unable to put in number.
It appears to the integer line, including BACKSPACE don't work.I can use the mouse to select and remove, but that leaves a mark of character in the password box.
Other buttons work except the row number.If I need to connect an external keyboard to verify where I connect (if I can)?
Any help would be great.Can I change the keyboard?
Hello
trying to connect a keyboard external usb to check it out. Yes, you can change the keyboard of laptop and it is not a complicated procedure.
Details how to change keyboard, you can find hereirisvista.com
Welcome them
-
I use indesign for books of the brand. I need always insert quotes from some holy books. so I need to insert text using the verse number
If you are looking for a way to automate where to insert the text? I really don't understand what you're trying to do.
-
I don't know where to post this, but I just want to share something,
There is a new hotline number of product CCP for Indonesian customer support.
This is 001-803-011-3833.
Thank you.
Where did you get this number? Thanks for sharing.
-
How can I get the number of the line causing the error?
If I try to catch an error with try-catch...
The object of e which is containing the text error message is not to store the line number where the error occurred.
try { error; } catch ( e ) { $.writeln( e.toSource() ) ; }
We are in a html extension Panel, not in extendscript toolkit.
The result is: (new ReferenceError ("syntax is not defined"))
It would be extremely useful that we could get the line number.
Thank you!
the following doesn't work for you?
try { error; } catch ( e ) { $.writeln( e.toSource() ); $.writeln( e.line ); }
Concerning
-
PLSQL question about printing the line number when an exception occurs
Hi all
My database: oracle 10G
Here's my question:
Explain my problem using a simple procedure, such as:
create or replace procedure p_hello_world
as
[a few variables declared]
Start
[a lot of code here]
exception
while others
dbms_output.put_line ('Exception occurred for the p_hello_world procedure');
dbms_output.put_line ('sqlerrm' |) SQLERRM);
dbms_output.put_line ('sqlcode' |) SQLCODE);
-Suppose I want to print the line number where the exception occurred, pourrais I do, if so please help me with this
end;
Now it's the same construction that I use for my use, I have a comment in the above exception block where I need to print the line number where the exception is produced, now since I'm on so that any other article, my procedure is always succeed even if an exception occurs, but using this technique I am not able to quickly debug my code but print line number would help me a lot Please help me with this as its rescue me great distress.
Concerning
RahulTry something like:
dbms_output.put_line(sqlerrm || chr(10) || dbms_utility.format_error_backtrace);
(Hoping that this is a simplified example and you are not actually using dbms_output as an exception handler...)
-
Error handling: to display the line number tht erored out with error message
Hello
I'm trying to update several lines at once and for some lines are error-ed out due to the failure of the validation. It's giving the correct error message does not display do not line number what error-ed out.
I tried with OARowValException, such as specified in the guide of the OA-developer to add the line number in the error message:
After using this it is show the number of line 1, which either the line it wrong:
Error in line 1 - the Start Date cannot be later than the Ending Date.
Error in line 1 - the Start Date cannot be later than the Ending Date.
In fact I've updated the line-2, 3 but it gives as 1st row.
Here's the code to add the line numbers for the error message, I added.
========================
try {}
throw new OARowValException (viewObject.getName)
voRowObject.getKey ().
"PA".
Error_Message);
}
catch (System.Exception e)
{
exList.add (e);
}
If (exList.size () > 0) {}
OARowValException.raiseBundledOAException (exList);
}
==========================
Code the developer guide OA that I follow:
throw (OARowValException) new
getViewObject () .getFullName (), / / View full name use object
getKey(), / / primary key line
"DAMIEN", / / message name abbreviated enforcement
"ATTR_EXCEPTION"); name of the message
end
Any suggestion/solution will be a great help.
-Shasha.
Edited by: 826073 January 6, 2011 06:58Thanks a ton of out. Your update has helped me solve the problem. The original Version I was using had no attributes defined as "Key attribute". Once I put one of the key attribute primary as "attribute Key' on my VO Editor, all worked great :). Thanks again.
-
The AR invoice line number does not Interface table
Hello
I have a Bill to convert with 5 lines, but the line numbers are 2, 3, 4, 5, 7. I pass the staging table line number to ra_interface_lines.line_number and I can see the data in the interface table I in the staging table. But when the car invoice is executed and the invoice lines have serialized numbers line 1,2,3,4,5. Can someone let me know why this is happening?
Thank you.I don't think that you can control the target (desired) line numbers, you can control how lines are classified by mentioning a rule-based command line
some columns, associate the collection and then rule command line batch source.
Your condition must wear the same # s to AR and I see gaps in the sequence numbers (line), I don't think it's possible.
See the description of column auto invoice. If the idea is to link to the desired line number, pass the number of line in a column of attributes and open a FDF so that you know
What that line the old system it maps too. After creation of invoice, you can update by running a sql however not recommended by oracle if it is necessary you
can do this as a last resort.LINE_NUMBER
This column is used by AutoInvoice and should be left to zero. AutoInvoice know nothing
values in this column and still the lines sequentially from numbers
rule number 1, in the order determined by the command line. -
I do a certain number of calls IVI instrument varius. Recently, I met a seemingly random downtime of one of the instruments. I know what instrument is to launch the message error, but the error handler, I wish this report line number of the source code when the call of the IVI has occurred so that I can find what appeal IVI is the origin of the problem.
Here's the quote from the boss: "line macro numbers and beautify our macros with error checking file name." I know that some compilers have them but not sure CVI. This would help to identify where these (and perhaps others) mistakes come. »
CVI offers macros __FILE__ and __LINE__ _ that are useful in these cases FUNCTION__.
-
How can I get number of rows in DB for view with "only up to line number.
Hi all
I use jdeveloper 11.1.1.3.0
in the development of the object view, only until the line number is set to 100, but it has 1000 row in DB.
now page jspx, I need to get the number of rows in db (1000), how can I get it?
If I get iterator or view are of the object status is not true, it returns the value 100.
How can I get 1000?Given that you have set the limit line number for the VO, VO will always and forever don't have 100 records or less. If you want the total number in the comic book, you need to create an another VO that is not the count (*) or one that does not limit the number of rows.
John
Maybe you are looking for
-
macOS sierra time capsule does not
I have upgraded to iOS sierra on my MacBook 2013 and 2015 s pro on 24/09/16. The time machine- Time capsule has not worked since. Wifi works but not the backup. We need real expert help solve this problem, not conjecture. I understand that if I use o
-
my computer does not recognize my ipad.
I want to download music from my computer to my ipad. Have a itunes account and you have installed itunes on my computer. I have the model MC820LL, capacity 14.0. Don't get no menu when I go to itunes on the ipad to be able to do anything, bring j
-
I have a dell dimension 3000 desk top and my cd/dvd drive has disappeared.It is a Phillips dvd8701, I tried to use the registry key without success cleaners. When I try to reinstall it is the error message I get. Windows cannot load the driver for th
-
The printer is visible on the page computer & devices & also in the router configuration page, however during installation becomes 2/3 of the way through it asks you to choose the printer that you want to install and the printer is there and you clic
-
I tried going through windows media but can find options of tv... any ideas?