my computer does not recognize my ipad.

Similar Questions

• My Win 7 64 bit desktop computer does not recognize my iPad 2

  I checked Device Manager and it shows a yellow "!", when I chose to upgrade, he says he is up to date and yet it still shows the yellow "!", and it does not recognize the iPad.
  I googled around and couldn't find a place to download an update.

  You need to download AND INSTALL ITUNES will install the drivers for it.

  http://www.Apple.com/iTunes/download/

• 10 Windows does not recognize my Ipad

  I can't sync my Ipad with Windows 10 because my computer does not recognize my Ipad and does not allow me to add it as a new device.

  Help, please.

  Asked and answered dozens of times on these forums already:

  If iTunes does not recognize your iPhone, iPad or iPod - Apple Support

• ePrint 7510 does not recognize my iPad when you try to scan from printer iPad.

  The printer and the iPad are connected to the same wireless system. The iPad will print successfully to the 7510 on the wireless system, as well as by e-mail via the website of HP. The printer recognizes and list the computer from apple that was loaded with the drivers that came with the printer for analysis and sends the information scanned to this computer. Because the printer does not recognize my iPad, I tried to load the drivers on the iPad to the HP site. I received an error message saying safari can't down load the drivers. Is it not possible to scan from the printer to the iPad? Is there another procedure that works? Thank you.

  Hello

  To scan from your iPad, install and use the application of HP ePrint home & biz.

  You can initialize the app scan, scan from the front panel of the printer to an iPad is not supported.

  Follow the steps below to get the app:

  http://support.HP.com/us-en/document/c02775166

  And below, you can discover how to analyze to use it:

  http://support.HP.com/us-en/document/c02486319

  Kind regards

  Shlomi

• I have a My Passport to the top by car and I get error messages on this to be ejected (although it was still connected). Now my computer does not recognize the drive. All solutions?

  I have a My Passport to the top by car and I get error messages on this to be ejected (although it was still connected). Now my computer does not recognize the drive. All solutions?

  Drive, interface in the crankcase of training controller, or the USB port or the cable may be faulty.

• iTunes does not recognize my iPad

  I was syncing my iPad to iTunes for several years with no problems. When I tried to sync this morning, iTunes does not recognize my iPad, regardless of what I'm trying. My backup and applications are still there, but they just don't connect. I'm running an iPad2, iOS 9.3.1. I have authorized an update of iTunes in the last week or two, but I don't know which is linked. Current ITunes is 12.3.3.17, installed on a PC with Windows 10. The device icon does not appear in the menu bar iTunes header.

  I tried:

  Restart both iPad and PC, without any help.

  Uninstalled and reinstalled iTunes without help.

  I would like suggestions. Thank you very much.

  Please follow these steps

  If iTunes does not recognize your iPhone, iPad or iPod - Apple Support

• I downloaded Itunes 12.3.3 and now I tunes does not recognize my Ipad or Iphone. I went through all the procedures and just uninstall and reinstall. Please fix 12.3.3.Thanks.

  I downloaded Itunes 12.3.3 and now I tunes does not recognize my Ipad or Iphone. I went through all the procedures and just uninstall and reinstall. Please fix 12.3.3.Thanks.

  iTunes: fix iPhone or iPod not detected Windows 10

• Computer does not recognize Toshiba external 500G HDD - HARD drive

  Sorry, I use a translator, because all the illiterate

  A year and a half used the hard drive, and now the computer does not recognize it, the TV too.
  In Device Manager, it is there, but says "initialization error".

  What should do?
  Thanks for the replies

  You have partitions software installed on the laptop you?
  I guess that the HARD disk does not appear in windows Explorer, but common partition as the partition Wizard tool might be able to recognize the HARD drive.
  You can try to format the HARD disk and to create the new NTFS partition.

  Another solution:
  Usually, you can initialize the disk by DiskManagement.

  In disk management, right-click the disk you want to initialize and then click on initialize disk.
  In the dialog box initialize the disk, select the disk to initialize.
  You can choose to use the master boot record (MBR) or the style of partition GUID partition table (GPT).

  Once a disk is initialized, you can create partitions on it.
  After you create a partition, you can format the partition to create a filesystem (NTFS).

• My computer does not recognize my I - Phone 5s, why?

  My personal I-phone 5s went crazy about 3 weeks.

  • wouldn t blue tooth with my truck-telephone calls
  • connection of the cable with truck, 2 songs, radio and telephone game crashes
  • try to use SoundHound and it changes the mode on my XM radio
  • my computer does not recognize
  • yet my computer recognizes my I - Pad Air

  Did a reset - erase all content and settings;

  • There will be phone calls Bluetooth
  • yet to mess with the radio when you use SoundHound
  • computer doesn't always recognize it
  • Yet computer wife recognizes it?

  PC or Mac?
  When you say "does not recognize" what you want to do?

• The computer does not recognize my skycaddie is hung

  Synchronization of caddie program is installed, but it seems that the computer does not recognize my skycaddie is hung

  Original title: I can't get the computer to recognize my sky caddie - when I go to install a new device is not able to find it

  Hello

   
   
  1. the device is recognized in Device Manager? Is there a yellow exclamation point or question mark next to the device?
   
  2. don't SkyCaddie connects to the computer via USB? If so, is he recognized initially until the software is installed?
  3. do you receive any error messages?
  4. What is the antivirus installed on the computer program?
   
  If you connect the device via USB, I suggest you to change the USB port and check with the question.
   
   
   
  
  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/en-us
   
   
  I suggest you provide more information about the issue so that we can better help you.
   
  I also suggest you to see the link below for more option support about the issue.
   
  http://clubsg.SkyGolf.com/content/FAQ/SkyCaddie+technical+support+questions
   
   
   
  I hope this helps.

• IS PowerShot A4000: My computer does not recognize my camera when it is connected, saying "Windows cannot op.

  IS PowerShot A4000: My computer does not recognize my camera when it is connected, saying "Windows cannot open the device because the configuration (in the registry) is incomplete or damaged". This a recent phenomenon. I reloaded the latest Camerawindow software nothing works. Recommendations to solve this problem?

  Problem solved. Recommendations by e-mail has helped. I had to use 'Device Manager' from the Vista Control Panel for adding new hardware. I also need to add a new driver. The Kodak in Windows Vista camera driver worked. The camera is now recognized. Thanks for the help.

• My Windows Media Center XP computer does not recognize my Nikon Super Cool Scan 5000 ED

  I have a Nikon Super Coolscan 5000 ED, which I have not used for several years.  I tried to install it using the Nikon Scan software and was a failure.  Site of Nikon said that by Hamrick VueScan will also run this scanner.  My computer does not recognize the scanner and so I can not install the drivers for it.  I tried to connect this device on several different computers and with different cables.  None of these computers does not recognize the device.

  Hello

  As you mentioned that none of the computers recognize this device, you will need to contact the manufacturer and check.

  http://Imaging.Nikon.com/support/

  You can post your request here:
  http://support.nikonusa.com/app/answers/detail/A_ID/238

• Computer does not recognize LaCie external hard drive when it is connected.

  Should I just a 'driver' of the manufacturer so that windows recognize? Help, please.

  The device is a hard drive (250 gb) bought in 2006.   LaCie support has provided relevant solutions.

  I disconnected the USB line, reconnected with the power of the unit it turned on and off while only plugged, unplugged, and made all possible combinations of many times. My computer does not recognize anything.

  I can't find it in my computer, and also, the computer does not list the device in the Device Manager utility.

  I have disabled the Windows Firewall.

  The computer with which the external drive worked and one that currently does not recognize are model computers windows XP (2008).

  Thank you very much for your help.

  Thanks for the reply.

  In the meantime and after reviewing all similar positions, it turns out that find the 'live' usb device does the trick.

  So, other people with similar problems, try the usb cables at the back of the computer (all), then by restarting the connection there.

  It worked for me.

  Thanks again for the reply!

• My computer does not recognize my flash drive at all

  In the past I was able to plug my USB key and use it (make changes, and save the information), now when I insert it, nothing happens. The screen displays just the desktop.    The computer does not recognize it.  I tried another drive flash with information on this subject, once again, nothing happened.  I need help how to fix this problem.  Thank you.

  Sounds like your AutoPlay settings need to be adjusted.

  Something to try...

  Insert the flash drive into a USB port and go... Start / my computer...

  The flash player should be recognized by a drive letter...

  Right-click on the drive letter and go... Properties / AutoPlay tab...
  Left click on the button "Restore default settings" / apply / OK.

  Now... Remove and re - insert the flash drive and see if there is an improvement.

  And... the following Wizard may be worth a try:

  Microsoft AutoPlay Repair Wizard
  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=2648

• Computer does not recognize my Flash drive or application to be open.

  Original title: usb not recognized

  My computer does not recognize my Flash drive or application to be open. However, I cannot hear the sound produced when something is connected.

  Hello Miss beautiful,

  1. are you facing problems with USB devices?

  2. did you of recent changes on the system?

  You can read the following article and check if it helps.

  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive

  Important: The above link contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows