Linea pages numbers

Similar Questions

• Table of contents - several line Page # alignment problem

  Hi all

  I have a Table of contents, in which I have a few entries that develops in two lines.

  When the contained entries Table expand to two lines, leader are not added and page numbers shows next to the entrance.

  See Image below: entrance with RED ARROW - 1.9.4 indicates Page 44 without a leader:

  

  No explanation will be appreciated.

  Thank you.

  No need to change the titre3 paragraphs. Look at the reference to the table of contents page. There is probably a page containing the TOC tag that defines the format of the entries in the table of contents. There the paragraphs which badges are derived from paragraphs in the main document that generate entries by adding OCD to the original label. Thus, registrations for titre3 paragraphs are marked Heading3TOC. The reference page has a Heading3TOC which looks like point something lke:

  <$paranumonly>  <$paratext>.........................<$pagenum>

  When there is a tab between <$paranumonly>character and <$paratext>that moves from the left side of the <$paratext>2.0 cm, and another tab between <$paratext>and <$pagenum>that moves to the right of the <$pagenum>-12.0 cm.

  I mean put a space before the second tab. You can also add an additional tab before the <$pagenum>.

  -Lynne

• InDesign page on 1 page numbers

  Hello

  Someone knows how to put the two page numbers in 1 page in Indesign CC without having to create a text box on the left page and a link to the right page? My page numbering will look like this '02 I 03' and will be about 100 pages for the line between page numbers will have to move with numbers.

  Thank you very much

  Richard

  [Left the salon everything Adobe general, not support, forum for a specific support by product - MOD forum]

  Thanks it works

• How to get page numbers in toc shift to the right

  Hello

  I'm working on a table of contents and try to get the (3, 4, 5, 7) page numbers against the level 1 and level 2] headers to the right. I don't know how to proceed. I would appreciate your help.

  Lee is the screenshot:

  

  Thank you

  You should have a tab between the number of para and text entry, as well as between the text and the page number, but do not display your text symbols (Type > show hidden characters) so I can't see them. Assuming they are there and the two paras TOC use header level 1 and level 2 header by styles (just uncertain of the page, but if I have a para tag names wrong, just replace the good):

  1. Click on the first line of the table of contents.
  2. Type > tabs.
  3. Set a left tab align the left edge of the text entry and a tab right-align by a point of the leader of the page number. (To add: select the type of tab in the tab at the top on the left, then click on above the rule.) You can drag them left/right to move. A selected tab is highlighted in blue or orange, and you can add the point of leading to a selected tab.)
     
  4. With the cursor on the first line, right-click on the name of the style and redefine the style so that the other 1-level headers are updated.
     
  5. On the second line, drag the left triangle below to indent the line (the upper triangle comes along for the ride). Adds a tab on the left for text entry and a right tab by a point behind the leader for the number of page, under step 3 above.
     
  6. Level 3 header and Style to redefine a right click.
     
  7. Fact!
     

  For more information, see create a table of contents in Adobe InDesign and set tabs and indents in Adobe InDesign .

• Table of contents separate chapters page numbers.

  I am trying to understand the lay-out of national geographic for purposes of personal training. When I try to separate the page numbers of the chapters the in the table of contents, the text does ' t align correctly. I tried almost all tab combinations in all possible ways, but it does not work. Could someone help me?

  I want to lay out the following in the table of contents:

  Page number - chapter

  1 Omega chapter of

  the Galaxy

  Seaweed in Chapter 12 of the

  Netherlands

  Is it also possible to make an entry in the table of contents? As:

  1 Chapter 1

  The Galaxy Omega

  12 chapter two

  Seaweed in the Netherlands

  

  

  

  You must configure left intent intent and front-line negative in your paragraph style.

  

• Page numbers: how to ignore all other pages count

  I am trying to create a large number of postcards with sequential text following on the back of each postcard, who holds a master's degree 'B '. I want to add a paging option in the master which only has the masters 'B' pages, or side text of postcards. It is a very large document, so it would be nuts to proceed manually to each page.

  I tried everything in the page numbering to the point that I can understand, nothing helps.

  I looked at the list of styles to paragraph numbering option, but this would require the addition of a paragraph on each page. I need to do this at the master, in part because the numbering is integrated in a line of text that has also a section-based numbering and adjust according to the length of the number of grains.

  I know I could do this by creating two separate (one for the image-side) InDesign documents and one for the text to the side, export each PDF and recombine. But due to the large number of pages and other pains in this workaround, it's highly undesirable.

  In addition, this seems to be something really obvious, which I imagine others need before. Yet despite finding a ton, I could not find a solution. Am I missing something obvious?

  Thanks a lot for your help!

  

  Try this:

  -title of the folio mp text frame script

  Define slabel for a "a folio.

  Tell application "Adobe InDesign CS6"

  -a meter

  c Set to 1

  -check each page for mp items labeled folio and substitute

  Repeat with x in each page of the active document

  -replace the existing elements of MP

  Try

  delete substitution (point 1 of each element of x page whose label is slabel)

  try to end

  mpfolios the value of the elements of x-master page

  Repeat with i in mpfolios

  If i label is slabel then

  I have replace the destination page x

  end if

  end repeat

  -Add 0 s leader

  the value of nc from characters c (as string)

  If the nc is 1 then

  the value folionum to "00" & c have thong

  Otherwise, if the nc is 2 then

  the value '0' & c folionum have thong

  on the other

  c the folionum value as string

  end if

  -define the content of the folio to the counter string text block

  Try

  the value (point value 1 of each page element of x whose label is slabel) folionum

  set c to c + 1

  try to end

  end repeat

  tell the end

• Table of contents, separating the positions and Page numbers

  Hello

  I work with a table of contents in InDesign CC. Some of the titles that appear in the table will be very long and the next line. I want to wrap up before it hits the right hanging tab so that there is a visual separation between the page numbers and text. I understand that I can do it manually, but I want to do it consistently because it is a model for a large number of documents.

  Here's what I want it to look, the important thing is that the long position:

  1. regular position... 5

  1.1 regular subheading... 6

  2. long title that I hope

  a smart person would reduce

  down anyway............................................................ 8

  As opposed to:

  1.      Regular Heading...................................................... 5

  1.1 regular subheading... 6

  2. long title this person smart hopefullya would be

  cut down anyway..................................................... 8

  Any ideas? Is it possible to have an active table of content in a table? Or maybe something else? Expand on a second column?

  Well, looks like you know how to a negative indent on the left margin; you know, apply a few dash to the left margin, then some Indent first line. Look carefully at your dash controls in your toolbar: apply some indent right margin, then a few negative withdrawal of last line, and you can get your table of contents behaves exactly as you wish.

  I can take a few screenshots for you later if my description is not obvious.

• Table of contents: not positioned wrong page numbers

  When I create my "list of Figures" (A Table of contents item type) I get ugly results such as (p83 and p84):

  

  and (p105)

  

  There is not always a dashed line and page numbers are not always end on the right. Is there a way I can influence it?

  I found a solution, less elegant, but it seemed to work in my little test. Add a GREP style to your paragraph to add a character without pause style tab and the number. (This corrects the independent left-aligned numbers).

  

  Then do a search and repalce to add a space before the tabs. The result is far from ideal, because it leaves a space between the text and the leader, but it seems to solve the problems of end of line too tight.

• Headers and Page numbers

  So, I'm super new to inDesign and layout in general. I'm doing my first book and learn a LOT from my mistakes.

  So here is the current problem. I don't think page numbers and headers before doing just about everything else. I'm almost done about everything else. I have the project as "spreads" because I had no idea who was a thing to differently than a few 'pages '. I did not masks, and I'm under the impression that it's too late to do it now. So I'm imagining having to manually in a little box of text in a line at the top of each page to put the header and page number. But, I can't imagine how to do this when there is already text in the text box full main page. Is there an easy way to take care of this? I have even how this the hard way?

  Oh yes, I use CS3.

  It's never too late to add the automatic numbering of pages to a master page. Most likely all your pages use currently the Master has, so add your text block and add the current page marker. That's all it takes.

• Panel of page numbering

  Hello indesigners.

  I have a spreads.and 10 fact im, trying to get my book to start from the page numbers of

  page 6 and beyond.i insert on my pages current page number.whic's counting perfect mastrer

  Thanks to my spreads.the the only thing is I want to page 6 and beyond 1 2 3 4 5 6.

  but when I opened the numbering and section options, when I type in the start page of 6 Numbering dialog box

  page 6 becomes 12! instead of 1.

  Thank you.

  

  Do you have selected 6 page to start a new section?

  Once you make that page 6 should become a new page 1, and two things will happen, when you press OK. ID complain of duplicate page numbers, which can be fixed by going back to the first page in the doc, opeing options numbering again and by changing the style of the numbers and each of you pages after the fifth one will change of camp and you will see two pages of right in a line in the pages of the Panel.

  ID do not put odd on the verso (left-hand page) numbers as it goes against tradition and player expectations. It can be done, but in my opinion you should really add a blank instead if you have five pages of preliminary pages before the beginning of the document. If you really want to swap sides with numbering, before changing the numbering options, select the spread, do a right click and unchek allow selected spread to Shuffle. DFI asked if you want to keep the same number of pages in the spread, say Yes.

• Change the Page numbers in the index

  Hello

  I have a catalog and I added two pages in the middle of the catalog. Now, due to the addition of two pages, I need to update the page numbers on the index with the new page numbers. I only need to increase each of the page by two numbers, but that starts only at a certain point. Thus, for example, on one of the index I have, 1-70 page numbers may remain the same, since the two extra pages were added AFTER page 70. But every number after 70 must increase by 2.

  I have a find and replace script. I create a table in excel and drop into the document. The script then takes any word or number that is listed in column A and replace it with what is in column B. I used initially this script to find and replace in the catalog product codes, and it worked great, because all the product codes were quite unique.

  Try to use this same script to change the page numbers, but she totally fizzled. The problem is that the same number is repeated later in the table, so the script has the table constantly replace all numbers with the first two. So, here is a small sample of my table:

  Col Col B

  423 425

  422 424

  421 423

  420 422

  But when I run the script, here is what it will turn into:

  Col Col B

  423 becomes 425 425

  422 becomes 424 424

  421 becomes 425 423 becomes 425

  420 becomes 424 422 becomes 424

  Because it alters the table, all corresponding numbers in the document then will increase to 425 or 424.

  Is there a way to ensure that the script does not change the information in the table that she uses as a reference?

  Here is the script below. I didn't write (makes a very nice person on these forums) and don't know anything about the scripts.

  the_table = app.selection [0] .tables [0];
  app.findChangeTextOptions = null;
  with (app.findChangeTextOptions)
  {
  caseSensitive = true;
  wholeWord = true;
  }
  app.findTextPreferences = null;
  app.changeTextPreferences = null;
  for (row = 0; row < the_table.rows.length; line ++)
  {
  If (the_table.rows [row] .cells [0] .silence == ")
  continue;
  app.findTextPreferences.findWhat = the_table.rows [row] .cells [0] .silence;
  app.changeTextPreferences.changeTo = the_table.rows [row] .cells [1] .silence;
  app.activeDocument.changeText ();
  }

  Thank you very much!

  It should work, but make sure you do backup first. I'm not going to say once: first make a backup copy. Yes, I said that you should make a backup first!

  Copy the following script, paste it into an editor appropriate - Adobe ESTK which comes with InDesign is good enough. Save it as "omgwrongnumbers.jsx" in your user Scripts folder. Select as little text as possible, the script will be blindly increment (or decrement) all numbers in the range. And then double-click the script runs.

  //DESCRIPTION:omg the page numbers are all wrong!
  // A Jongware Script 18-Aug-2010
  if (app.documents.length == 0)
  {
       alert ("Oh give me some text to play with :'(");
       exit(0);
  }
  if (app.selection.length != 1)
  {
       alert ("We can't go on like this. Select some text first.");
       exit(0);
  }
  
  myDialog = app.dialogs.add ({name:"omg the numbers are wrong!",canCancel:true});
  
  with (myDialog)
  {
       with (dialogColumns.add())
       {
            with (dialogRows.add())
                 staticTexts.add ({staticLabel:"First to change"});
            with (dialogRows.add())
                 aBox = integerEditboxes.add({editContents:"1"});
            with (dialogRows.add())
                 staticTexts.add ({staticLabel:"Last to change"});
            with (dialogRows.add())
                 bBox = integerEditboxes.add({editContents:"99999"});
            with (dialogRows.add())
                 staticTexts.add ({staticLabel:"Add or subtract this value"});
            with (dialogRows.add())
                 cBox = integerEditboxes.add({editContents:"2"});
       }
  }
  if (!myDialog.show())
  {
       myDialog.destroy();
       exit(0);
  }
  first = aBox.editValue;
  last = bBox.editValue;
  step = cBox.editValue;
  
  if (first < 1 || first > last || step == 0)
  {
       alert ("Now you're pulling my nose arentya");
       exit(0);
  }
  app.findGrepPreferences = null;
  app.findGrepPreferences.findWhat = "\\b\\d+\\b";
  list = app.selection[0].findGrep(true);
  changes = 0;
  for (i=0; i= first && n <= last)
            changes++, list[i].contents = String(n+step);
  }
  alert ("Number of changes: "+changes);
  

• extraction of the page numbers for the XML export

  Hi all

  I export XML for InDesign CS4 book layout, and I need to have page numbers associated with tags as an attribute.

  Whenever the style "Heading 1" appears in my layout, it will run a script to determine that the title is on the current page and create a new attribute.

  (for example, < heading1 pagenum = 32 > it as a header < / Heading1 >)

  I think that this could be part of the code that would capture the current page.

  http://forums.Adobe.com/thread/451546

  .. .and the 'MakeXMLAttribute' in the Guide from JS Adobe can be fundamental to create attributes for each topic.

  Heavy goods vehicles that can help you with this?

  If you have any ideas, could you send along?  Very much appreciated.

  I'm so sorry, guys. Not one, but two major mistakes! (And for some reason any both 'enable' in CS4, but not in CS).

  Here's a version better:

  markHeaders (app.activeDocument.xmlElements[0]);
  function markHeaders (rootElem)
  {
    var a;
   if (rootElem.markupTag.name == "heading1")
   {
   // if (confirm (rootElem.markupTag.name+"\nContinue?")==0) exit(0);
   // if (confirm (rootElem.markupTag.name+"\n"+rootElem.lines[0].contents+"\nContinue?")==0) exit(0);
    try {
     rootElem.xmlAttributes.add ("pagenum", rootElem.characters[0].parentTextFrames[0].parent.name);
    } catch (_) { alert("wot? "+rootElem.lines[0].contents+"\n"+rootElem.characters[0].parentTextFrames[0].parent.name); exit(0);}
   }
   for (a=0; a
  First thing I did was disable the try... catch that handles errors, so I could see what went wrong. It was kinda a 'Oh' - I used parentTextFrame, rather than parentTextFrames [0] (error of version control and the boy, I should have watched out for these!).
  The second was more subtle: the script stopped after processing 2 headers, "Atrribute already exists." That has had a bit of debug step by step, until I noticed that I used the variable 'a' a loop... inside a function called... so the variable gets reset and starts again at 0... all... time... his... name... Calling themselves functions are called 'recursion', and now I know where he got that name (I've cursed and re-cursed until I finally got to work).
  Good news, it is this script still is blistering fast - now it works finally.
  		   

• The Bookmark Script list align Page numbers on the right

  Hello

  I have a script that lists the names of bookmark, and then the Page number after the bookmark as follows:

  Bill Smith #1

  Jeffrey Jones Page #5

  Christopher James Page #8

  What I would like the script to achieve is to list the bookmarks and then align Page numbers to the right of the pdf instead of mixed together.

  Please can someone tell if it is possible to do it in javascript?

  The existing code is as follows:

  / * All bookmarks in the list * /.
  / * Work recursive l‟arbre bookmark * /.
  function PrintBookmarks (bm, nLevel)
  {
  If (nLevel! = 0) {/ / do not print the root}
  bmReport.absIndent = bmTab *(nLevel-1);
  BM. Execute();
  bmReport.writeText ("" + bm.name + "Page"+ (bm.doc.pageNum + 1) ");

  }
  If (bm.children! = null)
  for (var i = 0; i < bm.children.length; i ++)
  PrintBookmarks (bm.children [i], nLevel + 1);
  }
  bmTab = 20;
  bmReport = new Report();
  bmReport.size = 2;
  bmReport.writeText (this.title);
  bmReport.writeText("");
  bmReport.size = 1.5;
  bmReport.writeText ("list bookmarks");
  bmReport.writeText("");
  bmReport.size = 1;
  PrintBookmarks (this.bookmarkRoot, 0);
  global.bmRep = bmReport;  do global
  global.wrtDoc = app.setInterval)
  "Try {'} '.
  +' reportDoc = global.bmRep.open ("list bookmarks"); "
  "+' console.println ("open Executed");"
  + "app.clearInterval (global.wrtDoc);"
  +' delete global.wrtDoc;'
  "+' console.println ("App.clearInterval Executed");"
  + "reportDoc.info.title = 'Bookmarks lists';"
  + "reportDoc.info.Author ="Bookmark Sequence list";"
  {+'} catch (e) {console.println ("Meanwhile...:" + e) ";}"}
  (100);

  Any help will be much appreciated

  The purpose of the report is seriously flawed. Beside the known bug page break in version 9 there are many other issues, such as the issue of alignment.

  The best solution I found that it was to place the page numbers on a new line then align them with dash and raise.

• Where are my Pages, numbers, and the apps to iMovie?

  I had to wipe my hard drive and reinstall OS Sierra due to computer problems. When I did my apps in Pages, Numbers, Keynote, and iMovie were missing. How can I get back them?

  Log in to the Mac App Store with Apple ID with which they are associated, click the purchases tab and redownload them.

  If they were deleted without being associated with an Apple ID, click here , or contact Apple.

  If they are associated with another Apple ID, you can contact Apple as above, but it can be said to buy.

  (145018)

• I am trying to print PDFS from Safari, but can not see the page numbers

  I just opened a document PDF 700 + pages in Safari and need to print the odd pages and there, but I can't see the page numbers displayed when I scroll the document. When I view the same document on an iPad, the page numbers change when I scroll but on my iMac (with the help of Safari 10) they appear not at all - and 700 + pages is a lot to go wrong! The clues how I can spend on 'display the page number?

  The default Apple PDF Internet plug-in used by Safari does not display the page numbers (except if they are in the footer of the PDF document in question), and there is no setting in Safari preferences to turn on this feature. Your best bet is to download the PDF file, then open it in preview or Acrobat Reader, where the thumbnails will be the correlation to page numbers. Then you can select several arbitrary thumbnails using the control button to print those selected pages. In the Pages section of the print Panel, you select "Selected Pages in the sidebar".

  The PDF Internet plug-in installed by Adobe Acrobat Reader or Pro displays the page current and total page in its turnaround Panel. If there are page numbers in the footer of the PDF file accessed, they are not deleted. You must enable Internet Adobe plug-in to Safari preferences: Security Panel.