Linear trace on a Log axis
Hello
what I want to do is quite unusual (I think) so I'll explain the context:
I made a program that captures data out of a Spectrum Analyzer, correct these data with correction of the antenna and use screws "Limit Specification.vi" and "Testing.vi limit' to interpolate my data with a pattern. The goal is to verify that the parser data do not receive on the model.
Everything is put in a waveform graph, with a scale of X logarithm.
BUT the problem is that when I put X scale on 'connect' in properties of the graph, my model of representation is transformed into a newspaper-horrible-thing. I know that it works as expected, but my program is not useless because of this.
How can I do to make the 'Linear' interpolation in a logarithmic scale? Is it possible using the two screw limits, or not? I hope that Yes...
Here is a screenshot of the thing (impossible to reach my VI, is property of the company, I work for (I'm investment)).
Thanks for your future help!
You must use 10 ^ 4 to get 10 000. Then interpolate you x = 3.0... 4.0 and calculating 10 ^ x and plot these data.
Felix
Tags: NI Software
Similar Questions
-
Linear encoder and configure logging
Hi all
I am currently using a surfboard with LV2010 M Series PCI-6280.
I have a linear encoder in X 4 mode connected to the counter 0 and I was wondering if it is possible to spread the values on the counter because it keeps track of the distance in a file TDMS using 'DAQmx Configure Logging'. I tried this using MAX to set this, but it doesn't seem to work, so I wonder if it is still possible that I couldn't find anything online about it.
Thank you
Lester
Hi Lester,.
My apologies, I tried on another Committee. It can work with yours, as well. There is an example of a task of counter in the buffer that should allow you to save the data by adding in the Configure logging VI as we did before.
Open LabVIEW and select help > find examples... it will open the Finder of the example. In the Finder of the example, expand folders to get to the input and output material > DAQmx > Counter measures > County Digital events > County Digital events-buffer-meter-Ext Clk.vi
Put the meter right channel and channel PFI in the controls, and then run the VI to see what he does. Then you can change the schema to add the configuration Logging VI (just as before) and rerun the VI. You will find yourself with a TDMS log saved to the path that wire you in the logging VI configures.
I hope this helps.
Kind regards
Daniel H.
-
Blood trace on Distance reading
Hello
I am trying to trace the readings of a cell voltage of charge (for blood pressure) on the movement of the origin of a linear actuator on the same axis. I just want that the readings of the two while loops to enter a chart and draw the correlation between them. Seems pretty simple, but all what I try, I can't get the table draw anything. When I run the program in the execution of climax, it seems to stop at the end of the while loop and never feed all the data in the graph XY. I don't know that it's just a rookie mistake that I have with the data type, or a failure to understand how the while loop needs to actually get the data to the next step.
Please let me know what I can do.
Is attached a photo of the VI and the VI himself.
Thank you
James
You need to understand why the While loop is coming to its end. The way you put in place, it will run until an error has occurred.
If it stops on its own, this means that you get an error somewhere in your data acquisition sequence. You should put an indicator on these screws to see which gives the error and why.
Once you figure that out, he must run forevever without giving an error. This means that it will run forever without stopping the loop, you will never get any data. You need a better way to stop the loop. My suggestion would be a STOP button connected to the stop of the While loop condition.
-
How to add a secondary axis in a chart excel with labwindowsCVI?
Hello
I am currently working on LabWindowsCVI and I treat my data in excel files. I use ExcelReport and Excel2000 instruments to build my data tables and my chart. Track, I use this function:
ExcelRpt_ChartWizard (chartsheetHandle, ExcelWorksheetHandle, "A1: C619" ExRConst_XYScatterSmoothNoMarkers 0, ExRConst_Columns, 1, 1, 1, ' consumer mobile platform ","TIME (sec)"," current / voltage (in V & A) ", NULL);
In this configuration, column A is X axis and B & C (Y axis) my blood given respective & current.
My graphics are drawn correctly, but I find a problem, 2 curves are on the main axis and I want a trace on the main axis and the other on the secondary axis. I can not to display a secondary axis.
This action is possible with LabwindowsCVI function and if so, can you tell me which work?
Thank you in advance,
NicolasThanks a lot dcl9000.
I wrote these functions after that to trace my chart and the secondary axis appears . It was necessary to create a second graphic handle to separate both my curve. Thanks to you, now I know a new function of Excel and I think that I will need in the future.
Kind regards
Nicolas
-
How do I change the format of data o1 - axis and y1 - axis of an areaGraph
Hello
I want to change the format of o1 - axis data and y1 - axis of my AreaGraph. The sample output of the y1 - axis data format should be like (ex.105b should be 105,000) and o1 - axis data format should be like (ex. month - new year line). Is it possible to change these values, I need? Here is the image of the chart.
Here is an example of photo output required to o1 - axis:
Here is the code in the jsff page:
< dvt:areaGraph id = "Chart1" subtype = "AREA_VERT_ABS".
inlineStyle = ' height: 165px; width: 545px; »
tabularData = "#{pageFlowScope.performanceDetailController.productionDevList}" >
< dvt:background >
< dvt:specialEffects / >
< / dvt:background >
< dvt:graphPlotArea / >
< dvt:seriesSet >
< dvt:series / >
< / dvt:seriesSet >
< dvt:o1Axis / >
< dvt:y1Axis / >
< dvt:o1TickLabel >
< dvt:graphFont size = "10" / >
< / dvt:o1TickLabel >
< dvt:legendArea automaticPlacement = "AP_NEVER" / >
< / dvt:areaGraph >
Hello
So that the axis of the time to display, your data must be provided as java.util.Dates.
Demo:
http://jdevadf.Oracle.com/ADF-richclient-demo/faces/feature/graph/timeAxis.JSPX
Doc of the tag:
http://jdevadf.Oracle.com/ADF-richclient-demo/docs/DVT/tagdoc/dvt_areaGraph.html
Doc link above tag:
The time axis
The graph area displays a time axis when the dates (type java.util.Date object) are specified for the column labels. Several timeXXX attributes are defined on the chart tag to customize the time axis. The child tag timeAxisDateFormat control the format in which are displayed time axis labels.
You will also need to set the attribute timeAxisType on the chart.
Valid values are the following:
- TAT_DEFAULT - (default) gives an axis of discrete-time for bar, line, area, combination or graphics stocks and for all their subtypes, if the following conditions are met: (1) the Dates must be at the forefront of group and dates (2) must be held at regular intervals. Discrete time axis is plotted on the ordinal axis, which is also known under the name of the O1 - axis. This constant indicates the following relief position if the requirements are not met: the time axis is disabled and all labels are converted to strings.
- TAT_IRREGULAR - provides an axis of continuous time on the x axis for bar, line, area or combination of graphics (only for dual-Y subtypes and split). Stacked charts are not supported. Additional requirements are: (1) the Dates must be on the edge of the group, the dates (2) must take place at regular intervals (sorted or unsorted), and (3) that a single dimension (layer) can exist on the edge of the group, if the data is provided via interface DataAccess. This constant indicates the following relief position if the requirements are not met: Dates (if any) are converted to strings, the time axis is disabled and an AlertEvent is triggered for all the AlertListeners that are saved with the graphic.
- TAT_MIXED_FREQUENCY - provides an axis of continuous time on the x axis for bar, line, area, combination or dispersion for subtypes dual-Y and split graphs. Stacked charts are not allowed. Additional requirements are: (1) data cells must contain dates, (2) data to plot on the x-axis must be of type Date and (3) data to trace along the y-axis must be a number.
- TAT_DEFAULT_STRICT - using discrete time axis, as described in TAT_DEFAULT, except that no fall-back position is available. If the conditions are not met, an error message appears.
- TAT_IRREGULAR_STRICT - using continuous time axis as described in TAT_IRREGULAR, except that no fall-back position is available. If the conditions are not met, an error message appears.
- TAT_MIXED_FREQUENCY_STRICT - using continuous time axis as described in TAT_MIXED_FREQUENCY, except that no fall-back position is available. If the conditions are not met, an error message appears.
- TAT_OFF - disables the time axis.
Hope this helps,
Katia
-
I can control the Trace files in bdump
Experts in good morning...
Question of BDUMP
In BDUMP, I have the following files...
-rw - r - 1 oracle oinstall 112687 19 Feb 13:41 alert_testdb.log
-rw - r - r - 1 oracle oinstall 33068 Feb 19 12:03 alert_TSH1.log
-rw - r - 1 oracle oinstall 20301 14 Feb 09:13 testdb_arc0_15379.trc
-rw - r - 1 oracle oinstall 632 5 Feb 04:56 testdb_arc0_17339.trc
-rw - r - 1 oracle oinstall 2118 Feb 5 05:22 testdb_arc0_17409.trc
... ..
.... ..
Totally 294 trace files...
I checked some .trc files; Almost have the same information.
ORACLE_HOME = /u01/app/oracle/product/10.2.0/db_1
Name of the system: Linux
Name of the node: xxxxxxxxxxxxxx
News Release: xxxxxxxxxxxxxxxxxxxxxxxxxx
Version: xxxxxxxxxxxxxxxxxxxxxxxxx
Machine: xxxxxx
Instance name: testdb
Redo thread mounted by this instance: 1
Oracle process number: 0
My question clear is:
1. If the alert log contains details of the error, what is the purpose of trace in bdump files?
2. why "n" no trace files created without useful information? (Almost with the same information]
3. what type of information is usually stored in .trc files?
What I know about tracefiles:
Each background process writes the trace files if an internal error has occurred.
If I'm wrong, please correct.Trace files and log alerts serve a different purpose. A simple way to think about it, is that the trace files are used when diagnosing problems. The alert log shows you what are the events are occurring in the database in general, flooding you don't not with unnecessary details. If the database crashed, the alerts log will tell you when the event happened, but the details of the process that crashed would be (I hope) in a trace file.
Some trace files are huge, and you certainly don't want them in the log of alerts because it would make it too big to be manageable or read.
For example, if a process crashes, the dumping process trace file to would be useful when you are working with Oracle Support to identify the problem. Or, if you want to see what a specific session, you can turn on tracing on it and and then format the trace with tkprof file to understand what made the session.
The documentation is a good summary:
Trace files
A trace file is an administrative file containing diagnostic data used to investigate the problems. Trace can also, provide guidance for tuning applications or an instance, as explained in "Diagnostic and performance optimization.
Types of Trace files
Each server and the background process can periodically write to a trace file. File information on the environment in the process, status, activities and errors.
The SQL trace facility also created trace files, which provide information of performance on individual SQL statements. To enable tracing for an identifier of the client, service, module, action, session, instance or database, you must run the procedures in the DBMS_MONITOR package or use Oracle Enterprise Manager.
A dump is a special type of trace file. Considering that track tends to be out of diagnostic data, a dump is usually a unique data output of diagnosis in response to an event (for example, an incident). When an incident occurs, the database writes one or more landfills in the incident directory created for the incident. Incident of discharges also contain the case number in the file name.
-
alert_ + ASM.log
Hi gurus,
Oracle RAC on redhat 5.4 11.2.03
We had a RAC database on 11.1.0.1 and we have migrated to 11.2.0.3 in a few months.
Everything works fine, but it is something abnormal. (I think it's abnormal).
Asm journal, we have:
/U01/app/Oracle/diag/ASM/+ASM/+ASM1/trace/alert_+ASM1.log
/U01/app/Oracle/diag/ASM/+ASM/+ASM2/trace/alert_+ASM2.log
but the rest of the newspaper/tracks are under/U02
If I Word adr base sql:SQL> sho parameter diag NAME TYPE VALUE ------------------------------------ ----------- ------------------------------ diagnostic_dest string /u02/app/oracle SQL> sho parameter background_dump_dest NAME TYPE VALUE ------------------------------------ ----------- ------------------------------ background_dump_dest string /u02/app/oracle/diag/rdbms/db_cos /db_1/trace
SQL > select value from v$ diag_info, whose name = "ADR Basic."
VALUE
--------------------------------------------------------------------------------
/ U02/app/Oracle
But if I check adrci it shows ADR based as/u01/app/oracle. I think that here I have the problem, I should change, right?
But if I try:
adrci > basic set = / u02/app/oracle
Come out and enter again the base returned to/u01/app/oracle. How I put it is permanent?
Published by: Me_101 on 29-ene-2013 04:08Hello
SQL> show parameter background_dump_dest NAME TYPE VALUE ------------------------------------ ----------- ------------------------------ background_dump_dest string /u02/app/oracle/diag/rdbms/db_ cos/db_1/trace
You are looking for the background_dump_dest in the database and not for ASM. I suspect that you have set the parameter above and the diagnostic_dest for instances of database as ' / u02/app/oracle/diag/rdbms/db_cos/db_1/trace ' and ' / u02/app/oracle ' respectively and for instances of the DSO as ' / u01/app/oracle.
Set the path of the CRS_HOME (path of the grid) and review the values.
export ORACLE_SID=+ASM1 export ORACLE_HOME=
sqlplus / as sysasm sho parameter background_dump_dest show parameter diagnostic_dest Kind regards
Shivananda -
Hello
We use oracle 10 g 2 in the aix system. My listener.log file grows continually and I want to rename the listener.old log file and create a new listener.log empty. I found a method on the internet that seems to be good.
lsnrctl % left log_status
% mv listener.log listener.old
lsnrctl set log_status % on
I have a question on that. The last line will create a new listener.log file and new logs is written in that? So hot now I create a listener.log file and make sure the newspapers here.
Thank youHello
You can rename the listener log file by following the steps you mentioned in your first post on this thread.
1. Set the listener log status to off. 2. Rename the current listener.log file. 3. Set the listener log status to on. Oracle automatically generates a new listener.log file.
Here is an example for you.
[oracle@ora1-1 ~]$ cd /u01/app/oracle/diag/tnslsnr/ora1-1/listener/trace [oracle@ora1-1 trace]$ ls -lrth total 588K -rw-r----- 1 oracle oinstall 581K Dec 23 19:32 listener.log [oracle@ora1-1 trace]$ lsnrctl set log_status off LSNRCTL for Linux: Version 11.2.0.3.0 - Production on 23-DEC-2012 19:33:08 Copyright (c) 1991, 2011, Oracle. All rights reserved. Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=ora1-1.mydomain)(PORT=1521))) LISTENER parameter "log_status" set to OFF The command completed successfully [oracle@ora1-1 trace]$ ls -lrth total 588K -rw-r----- 1 oracle oinstall 581K Dec 23 19:32 listener.log [oracle@ora1-1 trace]$ mv listener.log listener_old.log [oracle@ora1-1 trace]$ lsnrctl set log_status on LSNRCTL for Linux: Version 11.2.0.3.0 - Production on 23-DEC-2012 19:33:32 Copyright (c) 1991, 2011, Oracle. All rights reserved. Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=ora1-1.mydomain)(PORT=1521))) LISTENER parameter "log_status" set to ON The command completed successfully [oracle@ora1-1 trace]$ ls -lrth total 592K -rw-r----- 1 oracle oinstall 581K Dec 23 19:32 listener_old.log -rw-r----- 1 oracle oinstall 70 Dec 23 19:33 listener.log
Pokharel
Manage: pokharel
Status level: Beginner
Join date: 11 Sep 2012
Messages total: 8
Total Questions: 4 (3 pending)Think of your son of fence by providing appropriate points if you think they have been answered. Please clean the forum!
Kind regards
Shivananda -
Where are the java.util.logging properties?
Hello
We have a java code that is called from PL/SQL. The Java code uses java.util.logging to connect diagnostic and error messages.
Where are the papers?
Where we can configure logging properties?
DB is Oracle 11 g.
Documentation (Guide of the Java developer, 11 g Release 2 (11.2), E10588-04) says nothing about the record.
Thank you...
RogerHi, Roger:
The recorded information come to the .trc file for the Oracle (shared or dedicated) server process.
.trc files are the Oracle Diagnostics directory, for example:
$ORACLE_BASE/diag/rdbms / $ORACLE_SID / $ORACLE_SID/trace
To configure log file properties read this blog entry:
http://marceloochoa.blogspot.com/2007/11/getting-logging-entering-exiting-and.html
Best regards, Marcelo. -
Transformation of the axes of the field
Hi all
I'm plotting data in Weibull and try to use the original Weibull chart axes. In a Weibull plot, the percentage still functional items at any given time t, or of reliability r (t), is traced from that time. Here's the problem: the x-axis are the natural logarithm of time, while the y-axis is (prepare) the natural logarithm of the natural log of the inverse of the reliability of the element at a given time, i.e. ln (ln (1/R (t))). I understand how to get a log axis, but it's clearly not sufficient for the value axis. Is there any LabVIEW feature that allows the transformation of the axis, or do I just simply do the transformation on the data itself, rather than the scale of the axis? (We are doing it, but it removes sensible reading that provide transformations).
Thanks for any advice,
Nathan
For the more general case, you will have to do it all yourself using a 2D photo indicator.
(Open finder example and look at the example of the "XY Multiplit Graph" for some ideas).
-
Cannot open Workflow rules of approval in OIM 11 g R2 PS3
Hi all
When I clicked on workflow-> screen sysadmin IOM approval button, empty page is opened.
When I open the newspapers with Trace: 32, diagnostic log file a below the error log.
You have an idea about this error?
How can I solve this problem?
------------------
[2016 02-04 T 15: 20:26.672 + 02:00] [WLS_OIM1] [TRACE] [] [oracle.adf.share.ADFContext] [tid: [ASSETS].] [ExecuteThread: '19' to the queue: "(self-adjusting) weblogic.kernel.Default"] [username: xelsysadm] [ecid: 986ee303cfcde60f:4d7a1bd9:152a60fcce3:-8000-000000000000da49, 0] [APP: oracle.iam.console.identity.sysadmin.ear #V2.0] [IDDM: 0000LAgF6St4ykW_Px ^ Ayd1MgQs700000C] [SRC_CLASS: oracle.adf.share.ADFContext] [SRC_METHOD: getADFFacesViewScopeMap] oracle.adf.view.rich.context.AdfFacesContext allows for the ViewScope
[2016 02-04 T 15: 20:26.675 + 02:00] [WLS_OIM1] [TRACK: 32] [] [oracle.adf.share.ADFContext.allocationLogger] [tid: [ASSETS].] [ExecuteThread: '19' for queue: "(self-adjusting) weblogic.kernel.Default"] [userId: xelsysadm] [ecid: 986ee303cfcde60f:4d7a1bd9:152a60fcce3:-8000-000000000000da49, 0] [APP: oracle.iam.console.identity.sysadmin.ear #V2.0] [IDDM: 0000LAgF6St4ykW_Px ^ Ayd1MgQs700000C] [SRC_CLASS: oracle.adf.share.ADFContext] [SRC_METHOD: logDiagnosticsInternal] > > recorder invoked distribution: BUFFER EXCEEDED, STARTING OVER [[] memory ALLOCATION
The value of Count = 1 Delete Count = 1
> > Distribution batteries:
> > > > The value ADFContext:
External context:
[Context: ServletContext@1995135651[app:oracle.iam.console.identity.sysadmin.ear module: sysadmin path: / sysadmin spec-version: 2.5 version: V2.0]
Request: weblogic.servlet.internal.RequestEventsFilter$EventsRequestWrapper@2d1c4351
Discussion: Thread [[ACTIVE] ExecuteThread: '19' for queue: "(self-adjusting) weblogic.kernel.Default", 5, pooled discussions]
java.lang.Thread.getStackTrace(Thread.java:1589)
oracle.adf.share.ADFContext.storeAllocationStack(ADFContext.java:1523)
oracle.adf.share.ADFContext.setAsCurrent(ADFContext.java:1463)
oracle.adf.share.http.ServletADFContext.initialize(ServletADFContext.java:470)
oracle.adf.share.http.ServletADFContext.initThreadContext(ServletADFContext.java:420)
oracle.adf.view.page.editor.webapp.WebCenterComposerFilter.doFilter(WebCenterComposerFilter.java:88)
weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:133)
org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$ FilterListChain.doFilter (TrinidadFilterImpl.java:478)
oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$ FilterListChain.doFilter (TrinidadFilterImpl.java:478)
org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:303)
org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:208)
org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
oracle.iam.ui.platform.servletfilter.IdentityContextFilter.doFilter(IdentityContextFilter.java:52)
weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:180)
weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
oracle.iam.ui.platform.view.authz.filter.AdvancedConsoleAccessFilter.doFilter(AdvancedConsoleAccessFilter.java:127)
weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
oracle.iam.ui.platform.servletfilter.OIMRedirectValidatorFilter.doFilter(OIMRedirectValidatorFilter.java:139)
weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
oracle.security.jps.ee.http.JpsAbsFilter$ 1.run(JpsAbsFilter.java:138)
java.security.AccessController.doPrivileged (Native Method)
oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:324)
oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:464)
oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:121)
oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:211)
oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
oracle.security.wls.filter.SSOSessionSynchronizationFilter.doFilter(SSOSessionSynchronizationFilter.java:422)
weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:163)
weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.wrapRun (WebAppServletContext.java:3730)
weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.run (WebAppServletContext.java:3696)
weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2273)
weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179)
weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490)
weblogic.work.SelfTuningWorkManagerImpl$ WorkAdapterImpl.run (SelfTuningWorkManagerImpl.java:545)
weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
> > > > Reset the ADFContext:
Discussion: Thread [[ACTIVE] ExecuteThread: '19' for queue: "(self-adjusting) weblogic.kernel.Default", 5, pooled discussions]
java.lang.Thread.getStackTrace(Thread.java:1589)
oracle.adf.share.ADFContext.storeAllocationStack(ADFContext.java:1523)
oracle.adf.share.ADFContext.removeAsCurrent(ADFContext.java:1500)
oracle.adf.share.http.ServletADFContext.removeAsCurrent(ServletADFContext.java:674)
oracle.adf.share.http.ServletADFContext.resetThreadContextScopes(ServletADFContext.java:669)
oracle.adf.share.http.ServletADFContext.resetThreadContext(ServletADFContext.java:629)
oracle.adf.view.page.editor.webapp.WebCenterComposerFilter.doFilter(WebCenterComposerFilter.java:160)
weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:133)
org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$ FilterListChain.doFilter (TrinidadFilterImpl.java:478)
oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$ FilterListChain.doFilter (TrinidadFilterImpl.java:478)
org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:303)
org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:208)
org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
oracle.iam.ui.platform.servletfilter.IdentityContextFilter.doFilter(IdentityContextFilter.java:52)
weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:180)
weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
oracle.iam.ui.platform.view.authz.filter.AdvancedConsoleAccessFilter.doFilter(AdvancedConsoleAccessFilter.java:127)
weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
oracle.iam.ui.platform.servletfilter.OIMRedirectValidatorFilter.doFilter(OIMRedirectValidatorFilter.java:139)
weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
oracle.security.jps.ee.http.JpsAbsFilter$ 1.run(JpsAbsFilter.java:138)
java.security.AccessController.doPrivileged (Native Method)
oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:324)
oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:464)
oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:121)
oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:211)
oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
oracle.security.wls.filter.SSOSessionSynchronizationFilter.doFilter(SSOSessionSynchronizationFilter.java:422)
weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:163)
weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.wrapRun (WebAppServletContext.java:3730)
weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.run (WebAppServletContext.java:3696)
weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2273)
weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179)
weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490)
weblogic.work.SelfTuningWorkManagerImpl$ WorkAdapterImpl.run (SelfTuningWorkManagerImpl.java:545)
weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
-------------------------------
Thank you.
Best regards.
Try following:
1)
Workflow policies enabled
Workflow policies enabled
TRUE
This property determines if the approval workflow is enabled or disabled in Oracle Identity Manager. Approval workflow is used to determine if the operation requires approval or not, and if approval is required, then what workflow must be invoked.
If the value of this property is TRUE, the approval workflow is enabled.
If the value of this property is FALSE, the approval workflow is deactivated.
For detailed information about the approval workflow, see Chapter 4, "Managing workflows".
(2) if the above does not fix, take a look at the thread below:
Re: Approval Workflow rule in IOM 11.1.2.3
~ J
-
Hello
I try to restart the management server but he's not leaving errors have no message.
Also, I tried to start the server managed by using the command line, but it gives following error.
Help, please.
< 9 December 2015 2:46:59 PM GMT + 05:30 > < error > < security > < BEA-090892 > < loading
See java OPSS security policy provider failed due to the exception, the exception
trace the stack or the log file of the server root. If still don't see no obvious caus
e, turn on debugging of the flag - Djava.security.debug = jpspolicy for more information
. Error message: cannot read the policy store. Reason is error PolicyStore, jav
ax.xml.stream.XMLStreamException: ends the Document concluded prematurely. >
< 9 December 2015 2:46:59 PM GMT + 05:30 > < critical > < WebLogicServer > < BEA-000386 > < Ser
the worm subsystem failed. Reason: weblogic.security.SecurityInitializationException:
Java security policy OPSS-provider loading failed due to the exception, see
exception stack trace or the log file of the server root. If still to see no.
obvious cause, turn debugging flag - Djava.security.debug = jpspolicy to get the mor
e information. Error message: cannot read the policy store. Reason is PolicySto
Error object, javax.xml.stream.XMLStreamException: ends the Document concluded prematurely.weblogic.security.SecurityInitializationException: OPSS loading java security
provider of security strategy has failed because of the exception, see exception stack trace or t
for first, the server log file is. If still don't see no obvious cause, enable the deb
UG flag - Djava.security.debug = jpspolicy for more information. Error message:
Cannot read from the policy store. Reason is the PolicyStore error, javax.xml.stream.XML
StreamException: Ends the Document concluded prematurely.
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.lo
adOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1402)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.in
itialize(CommonSecurityServiceManagerDelegateImpl.Java:1022)
to weblogic.security.service.SecurityServiceManager.initialize (SecurityS
erviceManager.java:873)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
Truncated. check the log file full stacktrace
Caused by: oracle.security.jps.JpsRuntimeException: cannot read policy stor
e. reason is error PolicyStore, javax.xml.stream.XMLStreamException: end Documen
t reached prematurely.
at oracle.security.jps.internal.policystore.xml.XmlPolicyStore.buildFrom
Leader (XmlPolicyStore.Java:527)
to oracle.security.jps.internal.policystore.xml.XmlPolicyStore. < init > (Xm
lPolicyStore.java:307)
at oracle.security.jps.internal.policystore.xml.XmlPolicyStoreProvider.g
etInstance(XmlPolicyStoreProvider.java:102)
at oracle.security.jps.internal.policystore.xml.XmlPolicyStoreProvider.g
etInstance(XmlPolicyStoreProvider.java:76)
at oracle.security.jps.internal.core.runtime.ContextFactoryImpl.findServ
iceInstance(ContextFactoryImpl.java:139)
Truncated. check the log file full stacktrace
Caused by: oracle.security.jps.JpsRuntimeException: javax.xml.stream.XMLStreamEx
reception: ends the Document concluded prematurely.
at oracle.security.jps.internal.core.datastore.xml.XmlDataStoreParser.ge
tDataStoreEntryStax(XmlDataStoreParser.java:166)
at oracle.security.jps.internal.core.datastore.xml.XmlDataStoreParser.ge
tDataStoreEntry(XmlDataStoreParser.java:180)
at oracle.security.jps.internal.core.datastore.xml.XmlDataStoreParser.ge
tDataStoreEntry(XmlDataStoreParser.java:187)
at oracle.security.jps.internal.core.datastore.xml.XmlDataStore.loadXmlD
ataStore(XmlDataStore.java:411)
to oracle.security.jps.internal.core.datastore.xml.XmlDataStore. < init > (X
mlDataStore.java:276)
Truncated. check the log file full stacktrace
Caused by: javax.xml.stream.XMLStreamException: ends the Document concluded prematurely
.
at oracle.security.jps.internal.policystore.xml.StaxPolicyStoreParser.pr
ocessPermission(StaxPolicyStoreParser.java:4875)
at oracle.security.jps.internal.policystore.xml.StaxPolicyStoreParser.pr
ocessGrant(StaxPolicyStoreParser.java:4373)
at oracle.security.jps.internal.policystore.xml.StaxPolicyStoreParser.pr
ocessJaznPolicy(StaxPolicyStoreParser.java:4317)
at oracle.security.jps.internal.policystore.xml.StaxPolicyStoreParser.pr
ocessJaznPolicy(StaxPolicyStoreParser.java:4293)
at oracle.security.jps.internal.policystore.xml.StaxPolicyStoreParser.pr
ocessSystemPolicy(StaxPolicyStoreParser.java:648)
Truncated. check the log file full stacktrace
>
< 9 December 2015 2:47:00 PM GMT + 05:30 > < opinion > < WebLogicServer > < BEA-000365 > < serve
r the status changed to FAILURE >
< 9 December 2015 2:47:00 PM GMT + 05:30 > < error > < WebLogicServer > < BEA-000383 > < a crit
iCal service to fail. The server will shut down >
< 9 December 2015 2:47:00 PM GMT + 05:30 > < opinion > < WebLogicServer > < BEA-000365 > < serve
r the status changed to FORCE_SHUTTING_DOWN >Kind regards
Sanket
Hi Sanket,
This problem generally arises because corrupt file system-jazn-"Data.xml".
If having a backup where you can restore it and then test it, I think it will work.
Thank you
Srinath
-
I want to find the ORA-06550 errors
SQL> alter session set events 'sql_trace'; Session altered. SQL> select 'foo' from dual; 'FO --- foo SQL> exec foo BEGIN foo; END; * ERROR at line 1: ORA-06550: line 1, column 7: PLS-00201: identifier 'FOO' must be declared ORA-06550: line 1, column 7: PL/SQL: Statement ignored SQL> quit
If I look in my trace file, I don't find any ORA-6550Trace file /u01/log/oracle/diag/rdbms/db01/DB01/trace/DB01_ora_42860586.trc Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production With the Partitioning, OLAP, Data Mining and Real Application Testing options ORACLE_HOME = /u01/app/oracle/product/11.2.0/db_3 System name: AIX Node name: srv01 Release: 1 Version: 7 Machine: 00F626FA4C00 Instance name: DB01 Redo thread mounted by this instance: 1 Oracle process number: 38 Unix process pid: 42860586, image: [email protected] (TNS V1-V3) *** 2015-09-17 13:59:49.109 *** SESSION ID:(358.241) 2015-09-17 13:59:49.109 *** CLIENT ID:() 2015-09-17 13:59:49.109 *** SERVICE NAME:(SYS$USERS) 2015-09-17 13:59:49.109 *** MODULE NAME:([email protected] (TNS V1-V3)) 2015-09-17 13:59:49.109 *** ACTION NAME:() 2015-09-17 13:59:49.109 CLOSE #4573396320:c=6,e=10,dep=0,type=1,tim=49416422688162 ===================== PARSING IN CURSOR #4573391040 len=22 dep=0 uid=0 oct=3 lid=0 tim=49416422690646 hv=3859763380 ad='70000005ae19830' sqlid='cvysbzgm0yn5n' select 'foo' from dual END OF STMT PARSE #4573391040:c=790,e=1312,p=0,cr=0,cu=0,mis=1,r=0,dep=0,og=1,plh=1546270724,tim=49416422690645 EXEC #4573391040:c=18,e=31,p=0,cr=0,cu=0,mis=0,r=0,dep=0,og=1,plh=1546270724,tim=49416422690748 FETCH #4573391040:c=8,e=13,p=0,cr=0,cu=0,mis=0,r=1,dep=0,og=1,plh=1546270724,tim=49416422690808 STAT #4573391040 id=1 cnt=1 pid=0 pos=1 obj=0 op='FAST DUAL (cr=0 pr=0 pw=0 time=4 us cost=2 size=0 card=1)' FETCH #4573391040:c=0,e=1,p=0,cr=0,cu=0,mis=0,r=0,dep=0,og=0,plh=1546270724,tim=49416422691085 *** 2015-09-17 13:59:57.118 CLOSE #4573391040:c=7,e=12,dep=0,type=0,tim=49416430697630 ===================== PARSING IN CURSOR #4573389592 len=202 dep=1 uid=0 oct=3 lid=0 tim=49416430698685 hv=3819099649 ad='700000066ccf5b8' sqlid='3nkd3g3ju5ph1' select obj#,type#,ctime,mtime,stime, status, dataobj#, flags, oid$, spare1, spare2 from obj$ where owner#=:1 and name=:2 and namespace=:3 and remoteowner is null and linkname is null and subname is null END OF STMT PARSE #4573389592:c=59,e=95,p=0,cr=0,cu=0,mis=0,r=0,dep=1,og=4,plh=853875749,tim=49416430698684 EXEC #4573389592:c=32,e=52,p=0,cr=0,cu=0,mis=0,r=0,dep=1,og=4,plh=853875749,tim=49416430698837 FETCH #4573389592:c=18,e=31,p=0,cr=2,cu=0,mis=0,r=0,dep=1,og=4,plh=853875749,tim=49416430698888 STAT #4573389592 id=1 cnt=0 pid=0 pos=1 obj=18 op='TABLE ACCESS BY INDEX ROWID OBJ$ (cr=2 pr=0 pw=0 time=37 us cost=3 size=80 card=1)' STAT #4573389592 id=2 cnt=0 pid=1 pos=1 obj=37 op='INDEX RANGE SCAN I_OBJ2 (cr=2 pr=0 pw=0 time=34 us cost=2 size=0 card=1)' CLOSE #4573389592:c=1,e=1,dep=1,type=3,tim=49416430698970 *** 2015-09-17 14:00:00.974 XCTEND rlbk=0, rd_only=1, tim=49416434554077 CLOSE #4573391040:c=1,e=6,dep=0,type=0,tim=49416434554235
How is it possible to capture the ORA-06550 and underlying instructions exec?
Thank you
Laurent
Laurent,
You can draw more precisely by using:
ALTER session set events "6550 trace name errorstack level 1";
and,
ALTER session set events ' trace name errorstack off 6550;
-
csSSCyclicalPlaceholderInclude Exception
Greetings!
I see a lot of these stack traces in my logs "view server output. I searched through the Oracle Site Studio documentation in an effort to understand what this exception is without result. Someone would be able to inform me of the causes of this exception, or point me to documentation that does?
!csSSCyclicalPlaceholderInclude,SS_DEFAULT_REGION_TEMPLATE,[SS_DEFAULT_REGION_TEMPLATE] exception stack intradoc.common.ServiceException: !csSSCyclicalPlaceholderInclude,SS_DEFAULT_REGION_TEMPLATE,[SS_DEFAULT_REGION_TEMPLATE] at sitestudio.SSWCMScriptExtensions.checkTemplateEvaluationStack(Unknown Source) at sitestudio.SSWCMScriptExtensions.getPlaceholderContent(Unknown Source) at sitestudio.SSWCMScriptExtensions.evaluateFunction(Unknown Source) at intradoc.common.DynamicHtmlMerger.computeFunction(DynamicHtmlMerger.java:1407) at intradoc.common.DynamicHtmlMerger.evaluateGrammarElement(DynamicHtmlMerger.java:906) at intradoc.common.DynamicHtmlMerger.substituteVariable(DynamicHtmlMerger.java:621) at intradoc.common.DynamicHtml.substituteVariable(DynamicHtml.java:1394) at intradoc.common.DynamicHtml.outputHtmlEx(DynamicHtml.java:1110) at intradoc.common.DynamicHtml.outputHtmlFromStart(DynamicHtml.java:1020) at intradoc.common.DynamicHtml.outputHtml(DynamicHtml.java:991) at intradoc.common.DynamicHtmlMerger.executeDynamicHtmlToWriter(DynamicHtmlMerger.java:2037) at intradoc.common.DynamicHtmlMerger.evaluateScriptToWriter(DynamicHtmlMerger.java:1849) at intradoc.common.DynamicHtmlMerger.evaluateScriptNoErrorHandling(DynamicHtmlMerger.java:1813) at intradoc.common.DynamicHtmlMerger.evaluateScriptEx(DynamicHtmlMerger.java:1771) at sun.reflect.GeneratedMethodAccessor159.invoke(Unknown Source) ... 27 more
Thank you!!
Found the answer myself. It looks like a page that I had has been configured to use several data files of contributor on the placeholders that did not exist. I just updated the site map settings, and it solved the problem.
-
production server starts do not: javax.naming.NameNotFoundException
Hi all
I'm trying to implement the CRS 11.1.0 Oracle trade 11.1 and Jboss 6.1
I did the configurations by CIM. When I start the server
(1) for help after an order by < jboss-dir > / bin:
./standalone.sh--server-config=atg_production_lockserver.XML - b 0.0.0.0.
(2) Using following command < ATG11-Dir > / home/servers/atg_production_lockserver:
./startServerOnJBoss.sh
I get the following error in the above two cases:
16:39:49, 391 INFO [nucleusNamespace.atg.dynamo.service.logging.ScreenLog] (ServerService Thread Pool - 65) with logging of external for debug messages and trace kernel to avoid hidden kernel logging information. Set the property /atg/dynamo/service/logging/ScreenLog.useInfoForDebug to false nucleus to use external instead trace and debug logging.
16:39:49, 654 INFO [org.hibernate.validator.internal.util.Version] (ServerService Thread Pool - 65) HV000001: Hibernate Validator 4.3.1.Final
16:40, 189 WARN [nucleusNamespace.atg.dynamo.service.jmdns.ClusterBroadcaster] (Pool-5-wire-1) Truncating value of the main serviceProperties of "commandLineModules".
16:40:04, 446 INFO [nucleusNamespace.atg.dynamo.server.OPSSInitializer] (ServerService Thread Pool - 65), the Platform Java (HSD) Services have been launched in JSE mode.
16:40:05, 016 ERROR [nucleusNamespace.atg.dynamo.service.jdbc.DirectJTDataSource] (ServerService Thread Pool - 65) could not resolve java: / ATGProductionDS: javax.naming.NameNotFoundException: error looking up ATGProductionDS, service service is not started jboss.naming.context.java.ATGProductionDS
at org.jboss.as.naming.ServiceBasedNamingStore.lookup(ServiceBasedNamingStore.java:132)
at org.jboss.as.naming.ServiceBasedNamingStore.lookup(ServiceBasedNamingStore.java:80)
at org.jboss.as.naming.NamingContext.lookup(NamingContext.java:197)
at org.jboss.as.naming.InitialContext.lookup(InitialContext.java:120)
at org.jboss.as.naming.NamingContext.lookup(NamingContext.java:183)
at org.jboss.as.naming.NamingContext.lookup(NamingContext.java:179)
at javax.naming.InitialContext.lookup(InitialContext.java:411) [rt.jar:1.7.0_71]
at atg.nucleus.JNDIReference.getReference(JNDIReference.java:162) [_DAS_slib_sclasses.jar:]
at atg.nucleus.JNDIReference.doStartService(JNDIReference.java:138) [_DAS_slib_sclasses.jar:]
at atg.nucleus.GenericService.startService(GenericService.java:561) [_DAS_slib_sclasses.jar:]
at atg.nucleus.NucleusNameResolver.startService(NucleusNameResolver.java:1751) [_DAS_slib_sclasses.jar:]
at atg.nucleus.NucleusNameResolver.configureAndStartService(NucleusNameResolver.java:1407) [_DAS_slib_sclasses.jar:]
at atg.nucleus.NucleusNameResolver.createFromName(NucleusNameResolver.java:934) [_DAS_slib_sclasses.jar:]
at atg.nucleus.NucleusNameResolver.createFromName(NucleusNameResolver.java:673) [_DAS_slib_sclasses.jar:]
at atg.nucleus.NucleusNameResolver.createFromName(NucleusNameResolver.java:654) [_DAS_slib_sclasses.jar:]
at atg.nucleus.NucleusNameResolver.resolveName(NucleusNameResolver.java:499) [_DAS_slib_sclasses.jar:]
at atg.nucleus.ConfigurationRef.getValue(ConfigurationRef.java:119) [_DAS_slib_sclasses.jar:]
at atg.nucleus.SimpleComponentState.setBeanProperty(SimpleComponentState.java:406) [_DAS_slib_sclasses.jar:]
at atg.nucleus.SimpleConfigurationState.saveToBean(SimpleConfigurationState.java:240) [_DAS_slib_sclasses.jar:]
at atg.nucleus.SimpleConfigurationState.configureBean(SimpleConfigurationState.java:263) [_DAS_slib_sclasses.jar:]
at atg.nucleus.BeanConfigurator.configureBean(BeanConfigurator.java:297) [_DAS_slib_sclasses.jar:]
at atg.nucleus.PropertyConfiguration.configureService(PropertyConfiguration.java:1055) [_DAS_slib_sclasses.jar:]
at atg.nucleus.SingleNucleusConfigurator.configureService(SingleNucleusConfigurator.java:84) [_DAS_slib_sclasses.jar:]
at atg.nucleus.NucleusNameResolver.configureService(NucleusNameResolver.java:1668) [_DAS_slib_sclasses.jar:]
at atg.nucleus.NucleusNameResolver.configureAndStartService(NucleusNameResolver.java:1378) [_DAS_slib_sclasses.jar:]
at atg.nucleus.NucleusNameResolver.createFromName(NucleusNameResolver.java:934) [_DAS_slib_sclasses.jar:]
at atg.nucleus.NucleusNameResolver.createFromName(NucleusNameResolver.java:673) [_DAS_slib_sclasses.jar:]
at atg.nucleus.NucleusNameResolver.createFromName(NucleusNameResolver.java:654) [_DAS_slib_sclasses.jar:]
at atg.nucleus.NucleusNameResolver.resolveName(NucleusNameResolver.java:499) [_DAS_slib_sclasses.jar:]
at atg.nucleus.ConfigurationRef.getValue(ConfigurationRef.java:119) [_DAS_slib_sclasses.jar:]
at atg.nucleus.SimpleComponentState.setBeanProperty(SimpleComponentState.java:406) [_DAS_slib_sclasses.jar:]
at atg.nucleus.SimpleConfigurationState.saveToBean(SimpleConfigurationState.java:240) [_DAS_slib_sclasses.jar:]
at atg.nucleus.SimpleConfigurationState.configureBean(SimpleConfigurationState.java:263) [_DAS_slib_sclasses.jar:]
at atg.nucleus.BeanConfigurator.configureBean(BeanConfigurator.java:297) [_DAS_slib_sclasses.jar:]
at atg.nucleus.PropertyConfiguration.configureService(PropertyConfiguration.java:1055) [_DAS_slib_sclasses.jar:]
at atg.nucleus.SingleNucleusConfigurator.configureService(SingleNucleusConfigurator.java:84) [_DAS_slib_sclasses.jar:]
at atg.nucleus.NucleusNameResolver.configureService(NucleusNameResolver.java:1668) [_DAS_slib_sclasses.jar:]
at atg.nucleus.NucleusNameResolver.configureAndStartService(NucleusNameResolver.java:1378) [_DAS_slib_sclasses.jar:]
at atg.nucleus.NucleusNameResolver.createFromName(NucleusNameResolver.java:934) [_DAS_slib_sclasses.jar:]
at atg.nucleus.NucleusNameResolver.createFromName(NucleusNameResolver.java:673) [_DAS_slib_sclasses.jar:]
at atg.nucleus.NucleusNameResolver.createFromName(NucleusNameResolver.java:654) [_DAS_slib_sclasses.jar:]
at atg.nucleus.NucleusNameResolver.resolveName(NucleusNameResolver.java:499) [_DAS_slib_sclasses.jar:]
at atg.nucleus.ConfigurationRef.getValue(ConfigurationRef.java:119) [_DAS_slib_sclasses.jar:]
at atg.nucleus.SimpleComponentState.setBeanProperty(SimpleComponentState.java:406) [_DAS_slib_sclasses.jar:]
at atg.nucleus.SimpleConfigurationState.saveToBean(SimpleConfigurationState.java:240) [_DAS_slib_sclasses.jar:]
at atg.nucleus.SimpleConfigurationState.configureBean(SimpleConfigurationState.java:263) [_DAS_slib_sclasses.jar:]
at atg.nucleus.BeanConfigurator.configureBean(BeanConfigurator.java:297) [_DAS_slib_sclasses.jar:]
at atg.nucleus.PropertyConfiguration.configureService(PropertyConfiguration.java:1055) [_DAS_slib_sclasses.jar:]
at atg.nucleus.SingleNucleusConfigurator.configureService(SingleNucleusConfigurator.java:84) [_DAS_slib_sclasses.jar:]
The DB is up and running as when I tried to hit the same database using one of my ATG 10.2 installation, it works very well.
To give some info on the side of jboss:
Here's the relevant (as I think) I'm glad my < JBOSS-HOME > /standalone/configuration/atg_production_lockserver.xml. USING < host name > below , but I use the correct host name value in the file:
subsystem "<" ">
< datasources >
< driver >
< module = "com.h2database.h2 driver" name = "h2" > "
org.H2.jdbcx.JdbcDataSource < class xa datasource > < / xa-datasource-class >
< / driver >
< / drivers >
< active xa datasource = 'true' name jndi = "" java: / ATGProductionDS ' pool-name = "ATGProductionDS" - context of use-java = "true" > "
< name xa-property-datasource = 'URL' > JDBC: thin: @ < host name >: 1521:orcl < / xa-datasource-property >
< name xa-property-datasource = "User" > noble_core < / xa-datasource-property >
< name xa-property-datasource = "Password" > password < / xa-datasource-property >
oracle.jdbc.xa.client.OracleXADataSource < class xa datasource > < / xa-datasource-class >
<!-uncomment the following if you are using Oracle 9i
< name "oracle.jdbc.V8Compatible xa-datasource-property" = > true < / xa-datasource-property >
->
ojdbc14.jar is < driver > < / driver >
< security >
< user name > noble_core < / name >
password <>password < / password >
< / security >
< xa-pool > < min-pool-size > 5 < / min-pool-size > < maximum > 100 pool size < / max-pool-size > < is-same-rm-override > false < / is-same-rm-override > < no tx separate pools / > < / xa-pool >
< timeout > < blocking-timeout-millis > 5000 < / blocking-timeout-millis > < 15 > idle-timeout-minutes < / idle-timeout-minutes > < / timeout >
< validation > < exception-sorter class-name="org.jboss.resource.adapter.jdbc.vendor.OracleExceptionSorter"/ > < / validation >
<!-to avoid deadlocks, you must set this - >
> isolation of transactions < TRANSACTION_READ_COMMITTED < / transaction-isolation >
< / xa datasource >
< active xa datasource = 'true' name jndi = "" java: / ATGSwitchingDS_B ' pool-name = "ATGSwitchingDS_B" - context of use-java = "true" > "
< name xa-property-datasource = 'URL' > JDBC: thin: @ < host name >: 1521:orcl < / xa-datasource-property >
< name xa-property-datasource = "User" > noble_catalogb < / xa-datasource-property >
< name xa-property-datasource = "Password" > password < / xa-datasource-property >
oracle.jdbc.xa.client.OracleXADataSource < class xa datasource > < / xa-datasource-class >
<!-uncomment the following if you are using Oracle 9i
< name "oracle.jdbc.V8Compatible xa-datasource-property" = > true < / xa-datasource-property >
->
ojdbc14.jar is < driver > < / driver >
< security >
< user name > noble_catalogb < / name >
password <>password < / password >
< / security >
< xa-pool > < min-pool-size > 5 < / min-pool-size > < maximum > 100 pool size < / max-pool-size > < is-same-rm-override > false < / is-same-rm-override > < no tx separate pools / > < / xa-pool >
< timeout > < blocking-timeout-millis > 5000 < / blocking-timeout-millis > < 15 > idle-timeout-minutes < / idle-timeout-minutes > < / timeout >
< validation > < exception-sorter class-name="org.jboss.resource.adapter.jdbc.vendor.OracleExceptionSorter"/ > < / validation >
<!-to avoid deadlocks, you must set this - >
> isolation of transactions < TRANSACTION_READ_COMMITTED < / transaction-isolation >
< / xa datasource >
< active xa datasource = 'true' name jndi = "" java: / ATGSwitchingDS_A ' pool-name = "ATGSwitchingDS_A" - context of use-java = "true" > "
< name xa-property-datasource = 'URL' > JDBC: thin: @ < host name >: 1521:orcl < / xa-datasource-property >
< name xa-property-datasource = "User" > noble_cataloga < / xa-datasource-property >
< name xa-property-datasource = "Password" > password < / xa-datasource-property >
oracle.jdbc.xa.client.OracleXADataSource < class xa datasource > < / xa-datasource-class >
<!-uncomment the following if you are using Oracle 9i
< name "oracle.jdbc.V8Compatible xa-datasource-property" = > true < / xa-datasource-property >
->
ojdbc14.jar is < driver > < / driver >
< security >
< user name > noble_cataloga < / name >
password <>password < / password >
< / security >
< xa-pool > < min-pool-size > 5 < / min-pool-size > < maximum > 100 pool size < / max-pool-size > < is-same-rm-override > false < / is-same-rm-override > < no tx separate pools / > < / xa-pool >
< timeout > < blocking-timeout-millis > 5000 < / blocking-timeout-millis > < 15 > idle-timeout-minutes < / idle-timeout-minutes > < / timeout >
< validation > < exception-sorter class-name="org.jboss.resource.adapter.jdbc.vendor.OracleExceptionSorter"/ > < / validation >
<!-to avoid deadlocks, you must set this - >
> isolation of transactions < TRANSACTION_READ_COMMITTED < / transaction-isolation >
< / xa datasource >
< / datasources >
< / subsystem >
Please guide...
Kind regards
Ben Milot
I don't know why it happened this way!
I've reconfigured the CIM, this time, use ojdbc6.jar instead of ojdbc14.jar is as a pilot for the connectivity of DB with CIM.
Reconfigured and re-deployed application and ear
Voila! has worked for me. The error disappeared.
Kind regards
Ben Milot
Maybe you are looking for
-
How to close the invitation of calendar or calendar invitation set permissions
How to close the invitation of calendar or calendar invitation set permissions
-
Satellite M110 - Toshiba utility blocks the shortcut Ctrl-space
Hello I use a laptop Toshiba Satellite (M110), which has Win XP installed on it.I am a .net developer, so I regularly use * IDE for Microsoft Visual Studio 2008 *. There is a * Ctrl-space * shortcut that is used in almost all IDEs (Visual Studio NetB
-
Satellite L40-17 t Wireless does not! Win 7 32 bit
Hello, my name is Alex. I have a problem with Toshiba L40 - 17 t wireless driver. So 3 weeks ago I got windows 7, WiFi worked fine, had no problems with it.Recently I reinstalled windows 7, and now my wireless does not work. It is said that no connec
-
When I try to paste it into my text (press and now in the text box), all I get now is a magnifying glass. I'm under 9.2 on an iphone 5. I disabled all the features of zoom on my phone. I rebooted my phone several times. I have reset my network set
-
I have a mini iPad 3 connected to my iMac with El Capitan using iTunes. The synchronization process hangs up in the meantime for the items to copy and displays an error message - trying to copy to the disk "Macintosh HD" failed. Required folder can