lines in my work move when printing

Hi all

I was faced with a problem when printing an artwork from an illustrator file (ai).

The black lines on the top green bars (illustrated below) look OK on my computer screen. However, when I print the image on paper, the black lines on the top green bars move (see the second image). I don't know why this is happening. Can someone help me solve this problem?

Thank you!

On the screen:

Printed version:

Deepak,

I believe that the problem can be caused by your use of a printer without a printer PostScript (emulation) driver. If you are unable to use/install, your best bet may be through PDF and print from Acrobat/Reader.

Tags: Illustrator

Similar Questions

  • A word or phrase moves when printing to PDF

    Why, when printing to PDF from another format (such as Word) the odd time a column or a Word will move out of alignment?

    I did the same steps to 14 Word files. 8 of them at the date of the section "Normal retirement Date" moved to the right as shown below.

    The others were very good. The numbers and date, in the right-hand column are all tabed on without space.

    This happens very rarely.

    Thanks for your help.

    0113_001.jpg

    It is a problem with the Microsoft Office applications since the beginning of the 1990s, believe it or not. Whenever you change the destination output device, Office applications will reformat your document based on the measurements of fonts to the resolution of the printer device. You can see the misaligned line endings changed tabs and pagination anomalies! There is absolutely nothing Adobe can do about it.

    For example, if your default printer is set to print at 600 dpi, and the instance of Adobe PDF PostScript printer driver is set to 1200 dpi, expect reflow issues.

    There are two workaround solutions. If you insist on printing at the instance of Adobe's PostScript of PDF printer driver to create PDF from applications Office, set the Adobe PDF printer as the default printer before entering the Office application and still print via the production of PDF. More likely, which will ensure consistency in the layout.

    That being said, creating PDF via PostScript distillation (i.e., printing to the Adobe PDF, PostScript printer driver instance) is absolutely not the recommended way to produce PDF from Microsoft Office with Windows applications. Acrobat installs a PDFMaker factory (an Acrobat tab with a function to create a PDF file as well as a Save as Adobe PDF from the home view) in these applications that creates PDFS directly, without any stink'in GDI and intermediate PostScript and tends to provide provision more consistent with what you see on the screen at once. It also preserves image and dynamic transparency color spaces. The only thing that does not support the PDFMaker are all .eps graphics inserted in your Office documents (something rarely used in modern times).

    We'll know if that helps you.

    -Dov

  • Lines every 1/8 inch when printing photo collage.

    Horizontal lines on my photo collage pprints.  The lines are 1/8 inch and appear on the top of page 1/3 of the page. I just bought my HP Envy 5530 all-in-one printer.   I had the same problem with the Photosmart 6510 except the lines were 1/2 inch apart & continues to the bottom of the full page.  both printers work fine for print ordinary & copy. If this problem cannot be solved, I'll have to return the 5530 still under warranty.  I tried all the troubleshooting suggested on the site and as suggested by the representatives via telephone, who do not understand the problem!

    Hello

    Each generation of printers requires a different software. New printers to print HP Photo Creations software. This software should be on the CD that came with the printer or you can download it from the following link:

    http://www.HP.com/global/us/en/consumer/digital_photography/free/software/photo-creations.html

    Kind regards.

  • Lines/undesirable traits around object when printing to PDF format

    Hi all

    When I place a document in Adobe Indesign CS3 it seems perfect on the screen.

    But when I print to PDF in the PDF file, most of the objects show the wrinkles around them.

    Of course, I put the race to '0' and color 'None '. The traits do not arise in Indesign and not when printing to printer directly.

    But when I save it as a PDF there are all of a sudden these traits in the PDF file.

    The features appear on Indesign (example oval and text objects) objects, on inserted EPS, TIFF, PNG, and GIF.

    Can someone tell me what what should I do to prevent these features around the display of the PDF object, printed Indesign?

    Thank you in advance, I appreciate all help.

    Best,

    JP

    The white lines are called artifact sewing flattening transparency. Instead print format PDF, EXPORT to PDF format and using Acrobat 5 or greater compatibility, who will be leaving the live transparency and eliminate stitching artifacts.

  • Some images (mostly line drawings) fuzzy, ok but when printed

    Hi all

    When my Indesign file displaying some of my images are difficult to read with or without overprint preview.

    These are above all the drawings/images with thin lines.

    When exporting to PDF format all looks fine, but it would allow a good look while working in Indesign.

    Is there a way to resolve this display problem?

    Attached is an example of the view of Indesign and exported final PDF view

    Additional information:

    I tried setting the document and the images are assigned to the display of high-quality performance.

    Links are all related.

    I've tried places images in PDF or JPEG format

    With the help of IndesignCC

    01.JPG02.JPG

    Don't bother on this subject, it's normal.

  • horizontal lines appear in the photos when printing

    I'm having a problem with printing photos in an indesign document.  When photos, jpeg files, are placed in the document and printed, there are small black lines that travelled horizontally through photos to a half inch.  These lines run through only the photos, not the rest of the document, and they do not appear when the photos are printed separated, and not in an indesign document.  This may be the cause?  Is there a guide that I accidentally put under tension which might be the cause?

    Thanks for any help on this matter.

    What version of InDesign and operating system? InDesign is fully patched?

    Your printer has a dragt mode and it stops in the driver?

  • I replaced a HP with an Epson Stylus all-in-one printer and cannot get the printer to print more than one page when printing from the computer.

    Original title: new printer

    I replaced a HP with an Epson Stylus all-in-one printer and cannot get the printer to print more than one page when printing from the computer.  The printer works fine when printing from a laptop or ipad!

    Start by going here--> http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?UseCookie=yes&oid=232591&prodoid=63099059&infoType=Downloads&platform=nodetect

    If the web page has not correctly detected your operating system, select it by using the drop-down list.  Rather than using the "Combo package" recommended but huge, expand the "Drivers" section and download driver printer v2.32 to a location that you will remember later.

    • Click on the ORB start and go into devices and printers.
    • Select (click) the icon of your Epson printer.
    • Once you have selected the printer, a button labeled "Print server properties" will appear in the toolbar.  Click on this button.
    • Click the "Drivers" tab on the print server properties dialog box.
    • Select the Epson printer in the list of installed printer drivers, and then click 'remove '.
    • In the context menu, select "Remove driver and driver package" and click OK
    • Click Yes, and then delete
    • Once the removal process is complete, restart the computer (probably not really necessary, but can't hurt)
    • Install the driver and the software using the file that you downloaded earlier

    At this point, your printer should work fine.  However, if you want the ability to print by emailing a file to your printer, you may need to install both 'Remote Printer Driver v1.65' in the category 'Pilot' and "v1.30 utility Configuration of printer Epson Connect" in the "Utilities" category

  • HP Officejet Pro 8600: Thin vertical lines when printing photos

    The printer referenced did a fabulous job to print photographs.  In this case, the printer is fairly recent and has recently recently consumed the original cartridges when it was decided to try to use it for photo printing.  Therefore, the fabulous results were extracted relatively new cartridges and consisted of at least a dozen photo printing in various sizes.  Then all of a sudden these thin vertical straight lines began to appear in print.  They are equidistant on the full image.  That they appear in the printed image.  When using paper letter (8.5 x 11) to print an image cropped at 8 x 10 with landscape orientation spacing is about 1 1/8 (one and one-eighth) inches or 8 evenly spaced vertical lines.  Somewhat like the photo was divided into 8 columns.

    According to the printer built in ink gauge, that the cartridges are now just a little more than half full.

    These lines are narrow enough so that they are not very visible when printing on normal paper (copy).  They would probably be imperceptible on many kinds of printed documents.  However, they become quite noticeable and reprehensible when using good quality (in this case HP) photo paper to print photos.

    Absence of a printer resolution is not good for photo printing.

    In addition to the troubleshooting suggests that the problem is not due to the printer, but rather to the software used to perform the printing. It was not immediately obvious that I printed only photos using Picasa and it worked fine and then all of a sudden the problem developed. However, I have now tried to print the same photos with other software and there is no problem for the steps.

    The Picasa forum also has many messages wanting to be the same or a similar problem to what I have experienced. Unfortunately, there doesn't seem to be an explanation for a repeatable cause, nor a specific solution. Some hacking autour with the settings and options seems to be in order. If it does not then print with other software may be necessary.

  • Line bottom of texts and borders are cut off when printing using HP Deskjet 2060 on Windows 7

    I kept getting a cut of text to the bottom line of the borders, notes and even pictures when printing using HP Deskjet 2060 K110a on Windows 7. I tried the solutions on the web and it does not work for me. Can someone help me with this problem please? I bought it just yesterday and I'm surprised with one such problem occurred, as it is always new. Thank you.

    It is usually only for a problem in Windows Vista, but it comes up in window 7 at any time.  The document below the link is designed to solve the problem in Windows Vista, but it should work on Windows 7 as well. Let me know what happens.

    http://support.HP.com/us-en/document/c01672454

  • I was so happy this madperson suggestio I n worked, until when I signed to thank I found that the "Printer-s" icon disappeared from my toolbar!

    See my original question and suggestion madperson apt, above.
    I was happy; his suggestion worked. I printed from a Web site.
    So, imagine my chagrin when, after having thanked by message, I found the icon "printer-s".
    had disappeared since BOTH my toolbar AND the "Control Panel to customize Firefox' choice of icons.
    Someone at - it another good suggestion?

    You can find print a button in the toolbar palette and drag the button to a toolbar.

    See also:

  • LaserJet pro 400 color: Blue lines on the right side of the page when printing in color

    When printing in color I get this blue line that occurs on the right side of the page. It is darkest near the edge and shoot low towards the printed part of the document. It is a vertical line that follows the entire length of the page. I printed a report of quality and it is always present. In my view, this indicates that it is a hardware issue, rather than software. Is there some rolls or the part that needs to be cleaned? Can you provide a link to the instructions?

    Thank you!

    Replace the cyan toner cartridge.

  • HP5530: Grainy prints when printing photos on HP5530. Also pink vertical lines on each side of the picture.

    When you print pictures from a SD card on advanced paper HP using HP instant ink pictures are grainy and present pink vertical lines on each side of the picture.

    Have tried Clean Printhead twice, own smear ink and printer to align. A photo then came out fine, but then returned to the problems of the original.

    Can anyone suggest how should I proceed to try to remedy this problem, please?

    Hey @Alastair2,

    Welcome to the Forums of HP Support!

    I see that you have problems with the print quality when printing photos. I also see that you are enrolled in the instant the ink program. As a subscriber to instant ink, for that matter, that I suggest contacting HP Cloud Services directly. You can do this by clicking on this link and fill in the form below.

    Please let me know if you are able to reach a resolution with the support. If you are, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

  • Dear Sir I have toshiba l300 notebook now, I had some problems at the start that a time window is error and posted massage window stopped work go on line chek problem and restart when I restart then run ok that's my question ok

    Dear Sir I have toshiba l300 notebook now, I had some problems at the start that a time window is error and posted massage window stopped work go on line chek problem and restart when I restart then run ok that's my question ok

    Hello

    display the appropriate error message.

    the error codes?

    Try the clean boot procedure to find the application or program causing the problem.

    http://support.Microsoft.com/kb/929135

    all the best!

    Addison

  • Printer all-in-one Photosmart 7520 missing lines when printing

    The printer sometimes missing lines when printing and sometimes written trash (not English - words that can not be understood)

    Have run new diagnostic doctor software, but get a message that the printer is OK!

    Hello there Mike1945,

    Thanks for the reply!

    Then, I propose updates through Adobe and also fill out your Windows updates also.

    Adobe:

    Open Acrobat or Reader.
    Select help - search for updates. If a new update is available, it installs automatically.
    Once installed, you can restart a computer.
    Then try to print the PDF file.

    The instructions above from: PDF print troubleshoot | Acrobat, Reader

    Complete all available updates, even those in option select! - Updates to Windows Installer in Windows 7

    Let me know how it goes!

    Kind regards

  • AcrobatX worked well both printing and scanning when harwired to my computer. I went wireless and Windows programs work well both printing and scanning, but not Acrobat.

    Using Windows7 - I tried Windows10 but restored to 7.

    AcrobatX worked well both printing and scanning when connected to my computer. I went wireless and Windows programs work well both printing and scanning, but not Acrobat. In Acrobat, we don't get the scanner and printer prints in a .prn e-file, not to the printer.

    Help please...

    OK - I'VE CORRECTED THE PRINTER WHICH HAS BEEN INEXPLICBLY THE 'PRINT TO FILE' VALUE, BUT THE SCANNER IS STILL MISSING.

Maybe you are looking for

  • How to transfer the database Access to Filemaker Pro 15

    I have a Windows access database I want to transfer to FileMaker Pro 15 on Mac OS 10.  I understand there is a complicated way to do it, but I can't find it on the support sites either Apple or FileMaker.  Does anyone have a solution? Needs of FileMa

  • HP Pavillion TS 15 Notebook PC: HELP! Update HP corrupt Word 2013 is now the notebook

    HP updated yesterday. I was working in Word. My document switched to Notepad with program and deleted formatting will not allow me to reset even footer.  I spent 3 hours yesterday to someone at Microsoft and I was told that it is the responsibility o

  • How to put a WIFI-connect button directly on the home screen?

    Hi all I know there is a wifi - connect button in the notification Panel, but I have to turn on my screen, open the Control Panel, then click on the "quick settings" button, then click on the WiFi connect button... " 4 actions connect within my own w

  • Nervous (a little) on running chkdsk.

    I have Windows Vista Home Premium. I have never run chkdsk.  When I had trouble to perform a backup of the file at the end of last week, I discovered in the event viewer, that "file backup skipped the source disck C:\ because it was damaged."  Use ch

  • Upgrade in Windows Vista Home Premium to Windows 7 Home Premium

    In the available search option upgrade online, I saw boxes Version upgrade of Windows 7 and Windows 7 just boxes. I ran the upgrade HP Advisor; the portable computer is compatible with Windows 7. Question: can I do a upgrade version not upgrade Windo