lines on screen windows 10 hp2000
I have a laptop HP2000 one I have a horizontal line on the screen. Does anyone know how to fix this?
Hello
Connect to this laptop to an external monitor, if the line is still appears, he would become a problem with the graphics card on the unit, if it is not the screen like that so bad. Therefore, replace the graphics card or display.
Tags: Notebooks
Similar Questions
-
I have Toshiba laptop running Windows XP Professional edition. I have a vertical line on screen ranging from very high to very low. It's about an inch from the right side of the screen. How can I solve this problem?
Sorry to hear that, but the screen is bad and must be replaced!
Good luck! Please rate me upward if you find my post helpful. Thank you!
-
Black screen with cursor, no login screen; Windows 7 Home Premium 32-bit
Hi all
I have a Dell Inspiron 1501 running Win7 Home Premium 32 - bit with IE9. It worked perfectly fine for over a year. The last update listed in the system restore was on 23/04/2011. He installed the Windows updates.
My husband used the computer very well the next morning. When I tried to start the computer, it wouldn't so I thought that maybe the battery should be charged. I plugged it in and nothing helped. The load button wouldn't even nothing worked at all. I bought a new battery and it came yesterday. I changed the batteries and let one over new-completely. I then tried to start the computer and he did something I could not do in months... He ran the disk check.
The disk check lasted almost 2 hours. He wouldn't let me cancel it either. He said (from the pieces that I could see) that system files have been moved, a ton of them said that they have been replaced, others have been removed, and some have been updated. I knew not what do when it restarted because it did it is normal startup, showed at the Windows startup screen and then when I thought he was going to the login screen, it became black and only the cursor has been visible and moving.
I restarted again and this time the display of incorrect closing came. I tried all the options - normal mode, safe mode safe mode w/networking and safe mode w/prompt - all results were the same. Then I tried using the recovery tool to fix the problem. Startup Repair showed no problem, System Restore showed either deleted or corrupted files and I ran Windows Memory Diagnostic and it showed no problems. I even ran the Diagnostic tool in the start menu.
I think that chkdsk deleted my files of Windows, but I don't know how to get back them. I have the OS disk and tried to use the repair feature, but nothing yet. Also, I had to ask my husband did it to my laptop and he answered nothing. So I had to be more specific, and his answer to my questions were: ' I didn't download anything "and" I just closed the laptop, I never disconnected or shut it down. I guess that's the reason for the battery works not properly the next day.
If someone could help me with this, I would be very grateful.
Hello
Why my screen is black when I start Windows 7?
http://Windows.Microsoft.com/en-us/Windows7/why-is-my-screen-black-when-i-start-Windows-7References to Vista also apply to Windows 7.
No registration necessary data and re - install Windows 7 might be the best
the option but here are some others.You can save your files by putting the drive in another computer or a
drive enclosure external hard and then save the. Do this using several
methods to redundantly. Of course a real computer store or
the manufacturer of your system can help to recover the files.Or you can use a boot Ubuntu CD to back up data.
Use Ubuntu Live CD to backup files from your Windows computer dead
http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windows-computer--------------------------------------------------------------
You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel - Device Manager - Display Adapter - Double
Click on - driver tab - click on UPDATE driver - then right-click on
Devices and UNINSTALL - REBOOT.A method to try to get to the desktop (try in two regular windows
and Safe Mode) is to CTRL + ALT + DEL - Manager tasks and the
Processes tab find EXPLORER.exe and END PROCESS on it-
then on the Applications tab - lower right kind - new task - in
EXPLORER.exe. Safe Mode is available by pressing F8 repeatedly
you the trunk upwards. CTRL + SHIFT + ESC also begins the Task Manager.First check this thread in case it is simple and if not come back
on this subject.Screen black issues are extremely difficult to repair and to any fix is
usually on a hit or miss basis. There is no information on a black background
screen as it is on a blue screen just adds to the difficulty. Often
using a restore point or Startup Repair will have no effect.You can try a google to see the proposed repairs, some of which have
works however these cover a wide field of efforts.Here's a video of one of them.
http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1
Here's another fix
http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.phpYou have a window 7 disk? You can try restoring the system to it.
If you don't have the disks from your system manufacturer will sell them at low prices.
Or try in safe mode if you can get there.How to do a system restore in Windows 7
http://www.SevenForums.com/tutorials/700-system-restore.htmlYou can create a recovery disc or someone else use same version
(restoring the system only to be bootable).How to create a Windows 7 system repair disc
http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html------------------------------------------------
These require good Windows 7 drives (especially if you can't
boot mode safe).Try the Startup Repair tool-
What are the system recovery options in Windows 7?
http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7How to start on the System Recovery Options in Windows 7
http://www.SevenForums.com/tutorials/668-system-recovery-options.htmlTry Repair Options recovery or a Windows 7 boot disk system
How to run a startup repair in Windows 7
http://www.SevenForums.com/tutorials/681-startup-repair.html-----------------------------------------------
Here are a few Google searches where many have found different solutions:
'Windows 7' black screen - check that a 1st
http://www.google.com/search?hl=en&source=hp&q=vista+black+screen&aq=f&oq=&aqi=g10#hl=en&sclient=psy-ab&q=%22Windows+7%22+black+screen&oq=%22Windows+7%22+black+screen&gs_l=serp.3..0l2j0i7j0.11061.20608.0.21138.19.13.1.0.0.4.874.5490.2-2j4j5j1j1.13.0.les%3B..0.0...1c.1.5fPLvNo9C0U&pbx=1&bav=on.2,or.r_gc.r_pw.r_qf.&fp=4624fb5637e33ac3&bpcl=35466521&biw=1024&bih=731-----------------------------------------------
If necessary and you can access all ordinary Windows.
If nothing works, you can do a repair installation.
How to start on the System Recovery Options in Windows 7
http://www.SevenForums.com/tutorials/668-system-recovery-options.htmlHow to do a repair installation to repair Windows 7
http://www.SevenForums.com/tutorials/3413-repair-install.html---------------------------------------------------------------------------
Another method that works sometimes: at the command prompt, to
a type of Windows 7 boot disk: (type a line or copy and paste a line)
at the time and hit enter - enter a parenthesis or "BOLD")c:
cd\
CD c:\Windows\System32\winevt (there is a space between cd and C :)
Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)RESTART Windows
=================================================================
These help in some cases:
There are backups in the folder C:\Windows\System32\Config\Regback.
These methods replace the registry with a backup.
Start with a Windows 7 disc. Both the complete following restoration
a backup of the registry.How do I recover from a corrupted registry that prevents Windows XP
startup ( Vista and Windows 7 also using the instructions in the manual)
http://support.Microsoft.com/kb/307545/Check this thread - you can use the command to a startup or recovery disk prompt.
(It's Vista and Windows 7 is the same)========================================
How to start on the System Recovery Options in Windows 7
http://www.SevenForums.com/tutorials/668-system-recovery-options.htmlWhat are the system recovery options in Windows 7?
http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7If you need to repair disks - these help repair Windows not re-install.
Often these records will help when the OEM recovery disk does not work.Download Windows 7 system recovery discs - charge now $9.75 for ISO
images to make the discs. (It can be done on any computer running XP,
Vista or Windows 7 which has a CD/DVD burner).
http://NeoSmart.net/blog/2009/Windows-7-system-repair-discs/How create a Windows 7 system - free repair disc (must be made on a
Windows 7 computer running the same 32-bit or 64-bit).
http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.htmlAn installation disc is possible also to use for repair. Of course you would
Use your own COST (product key).
How to: What are my options for Windows 7 reinstall media?See MVP Andre Da Costa message in this thread.
I hope this helps.
--------------------------------------------------------------------------------------------
Rob Brown - Microsoft MVP<- profile="" -="" windows="" and="" devices="" for="" it :="" bicycle="" -="" mark="" twain="" said="" it=""> -
Satellite L300D-20R - horizontal white line on screen
Switched my laptop this morning and the display is simmering and seems to have a shadow. The top 2 inches is OK; under the tent of 2 inches, there is a horizontal white line about 1/16 "thick. below this line, the screen is simmering, appears dark and foggy.
What can I do to fix this?
That's better than you can do. I assume that the display is faulty somehow.
-
Is there a way I can welcome screen, windows logon password?
Is there a way I can welcome screen, windows logon password? I just want my computer to boot and in windows without the logon screen?
Thanks for your help, I would be without a computer if I don't hadn't found you.
Extract from http://support.microsoft.com/kb/315231...
You can also turn on automatic logon without editing the registry in Windows XP Home Edition and Windows XP Professional on a computer that is not joined to a domain. To do this, follow these steps:
- Click Startand then click run.
- In the Open box, type control userpasswords2, and then click OK.
Note When users try to view help in the window information user accounts on Windows XP Home Edition, the help information is not displayed. Additionally, users receive the following error message:
Cannot find the: \Windows\System32\users.hlp Help file. Check that the file exists on your hard drive. If it does not exist, you must reinstall it. - Clear the "users must enter a user name and password to use this computer" option, and then click apply.
- In the automatically on log window, type the password in the password box, and then retype the password in the Confirm password box.
- Click OK to close the window automatically on Journal , and then click OK to close the user accounts window.
Tricky
-
Picture DimIs it possible to change my chart or monitor to increase the brightness of the screen, Windows, but (outside), I realize I ask for much because my machine is a 10 inch netbook ca. 2008, and the bios has very few options available user. The computer runs on XP (SP3) with input would be welcome.I hope yours,.Paul R.
Hi Paul R.
· Did you do changes on the computer before the show?
Follow these methods.
Method 1: Run the fixit of the article.
Troubleshoot Windows display the text on the monitor is not readable
Method 2: Follow the steps in the article.
-
Is it possible to include 'Response from Microsoft' in my home screen "Windows Live"?
Is it possible to include 'Response from Microsoft' in my home screen "Windows Live"?
Post Windows Live questions in the appropriate forum found here:
http://windowslivehelp.com/ -
I'll try to find a way to lock the screen/window so that using the touchpad do not inadvertently change screens?
Hello
One possibility would be to disable the clickpad function that is causing this behavior.
You can do the following.
Open windows control panel and on the top right, next to the display by: select "large icons". In the new page layout, select the entry of Synaptics.
The option, you must disable is called "Edge slips" - just click the box to remove the check mark, then click on apply and Ok to save the setting. For an example, see the picture below.
Kind regards
DP - K
-
scanned the file appears on the desktop screen (Windows 7) and couldnot be removed, what should I do?
Hello, Hello!
THANKS for your advice.
I'll try to do as you recommended. And will let you know the result.
Your helpfulness is really appreciated. Thanks again.
Dear Morris Subba,
This is to inform you that question pop up on my desktop PC went when I changed the color of my office.
I don't know why, and if he'll be back once again, but for me, it's a liberation!
Thanks for your concern and what you have done. THANKS........................................!
Have a nice day!
[EW] SQ
-
So, I play a game called ROBLOX and I like to play in full screen. Problem is sometimes people Skype me and so I alt + tab to read the message. So I reopen ROBLOX and full screen does not work. I can't click or use WASD to move and a sidescroll bar appears at the bottom of the screen and that's all I can click.
Some games do not come back to alt/tab well. It may not be better, but does minimize the game
If you use the Windows key?
If there is an option to play windowed who may be the best option, if it allows
a full screen, window.
-You can also try the ROBLOX forums.
.
-
Why does the login screen Windows continue reappear on my monitor?
I use Windows 7 Pro. Until a few months ago, I couldn't leave my desktop PC on overnight. As soon as I sat down and moved the mouse or tap a key on the keyboard, my screen saver would disappear and I could go right to work. It was great! Several months ago, a problem started that I describe.
Now, when I walk away from my PC for a few hours and return, I see the Windows login screen. It is not all the time, but it produces most of the time. My first step in tackling the problem was to check the settings of the screen Setter. The bomber of the screen ("ribbons") is supposed to go after 12 minutes of inactivity.
There is a box to the right of this setting that says 'On Resume, display the login screen'. This box is averified.
Then I adjusted to High Performance power settings. PC display is Never set for when to turn off the screen and also never to when putting the computer to sleep. I then changed the advanced power settings to try to remedy the problem. I made sure the following settings are the following:
High Performance requires no password on wake up.
Turn off the hard drive at the end of 800 minutes
The sleep settings:
Sleep after = never
Allow hybrid sleep = Off
Hibernate after = never
Enable timers wake = Disable
Turn off the display = never
Power button: Sleep button Action = Nothing
For security reasons, I usually use my PC as a standard user. But the login screen Windows guard reappear after I leave my PC for a while if I run as a limited user or administrator of the master.
Can you give me some additional ideas on what I can do to remove the login screen Windows reappear after I leave my PC?
Hello
Thank you for your reply with the requested information, sorry for the delay in response.
I suggest you follow the steps below:1. on your desktop "Windows + R" screen press button together press
The Board of Directors.2. in the command box type run 'control userpasswords2' click OK.3. uncheck the box for "users must enter a user name and password
This computer '.4. change the screen saver 'Ribbons' to something else for example
'Bubbles '.5 restart the computer.Now, check if the problem reappears.Hope this helps, please answer with the results for assistance. -
My loggin screen Windows 7 says I'm connected BUT...
My loggin screen Windows 7 says I'm connected but still looking for my password. When I retype it, it tells me that this is not the right password... but when I come back, it always says that I'm connected. How can I get past the loggin screen?
Hello
- You are able to view the desktop?
- Are you sure that you provide the password?
- What do you mean by "" my loggin Windows 7 screen says I'm connected but always looking my password. " ?
If you enter the wrong password, in the prompt below your user name may indicate the computer as user however will not connect unless you provide the password.Check out the link:
Microsoft's strategy concerning lost or forgotten passwords
http://support.Microsoft.com/kb/189126 -
WAIK command line vs normal Windows command line
Is there a difference between the normal command line installed with Windows and installed with Windows AIK command line? A list of 'aid' illustrates the same commands.
Hi LyleZoerman,
Thanks for posting in the Microsoft Community. As this question is related to the command prompt and the WAIK, I suggest you to post the question in this forum for help.
http://social.technet.Microsoft.com/forums/en-GB/w7itproinstall/threads
Hope this information helps. If you have any other questions feel free to respond and we would be happy to help.
-
Windows Update breaks the connection to the Internet screen Windows 8 start
At the start of a newly refreshed State, if I install an update from Windows Update or driver, my screen Windows 8 start apps can connect is the Internet. My desktop connection continues to connect to the Internet just fine.
I have goes back to the fact that my active network is deleted. The newly refreshed State presents a public network in the network and sharing Center under "view your active networks. I can then change for private and create a homegroup, if I want to. After an update has a happy ending, this active network gets blown away and he said: "You are currently not connected to all the networks."
How to fix this State without update Windows and how can I keep Windows Update to do this in the future?
OK guys, I also had the same problem. I messed around with my PC for about 3 weeks and I found the solution for me.
Is the internet connection marked as connection from home or at work. I changed mine public (charm > setting > connection > right click on the active connection > turn sharing or disable > No, (for the network in public place.)
Hope this helps you all.
-
Blue screen Windows on my HP ENVY 17, when you watch the movie from Youtube
Hello!
Product: HP ENVY 17 Notebook PC
Operating system: Windows 7, 64 bit
I got a blue screen Windows today on my HP ENVY 17 laptop, when I was watching a movie from YouTube. Did some work difficult debugging on the dump and found the following (see below). Of course, it's the graphics/video pilot that crashes.
What I missed in what is the updates?
Best regards Lennart
6: kd >! analyze - v
*******************************************************************************
* *
* Bugcheck analysis *.
* *
*******************************************************************************VIDEO_TDR_FAILURE (116)
Try to reset the display driver and recover from timeout failed.
Arguments:
Arg1: fffffa800f968010, optional pointer recovery environment internal TDR (TDR_RECOVERY_CONTEXT).
Arg2: fffff88004e46a48, the pointer in the responsible device driver module (owner tag).
Arg3: 0000000000000000, optional error (NTSTATUS) of the last operation code failed.
Arg4: 0000000000000002, optional internal context dependent data.Debugging information:
------------------FAULTING_IP:
atikmpag + 7 has 48
fffff880'04e46a48 4883ec28 sub rsp, 28 hDEFAULT_BUCKET_ID: GRAPHICS_DRIVER_TDR_FAULT
BUGCHECK_STR: 0 X 116
Nom_processus: System
CURRENT_IRQL: 0
You can download it from the HP website and install it on the device.
Maybe you are looking for
-
Jet Office NP 2542: help needed please
Hi there and thanks for reading.I do a university course and stay in student accommodation which benefits from a wireless network. I do my work on an iPad, so today, I went out and bought a hp office jet 2542 so I can print the course.I can't get the
-
Cancel the problems caused by Windows 7 updates
It's new, the standard operating system of Microsoft for Windows 7 to 45 minutes to work out its kinks and be functional? From the Auto Update April 30, that's my experience. My new laptop Toshiba with preinstalled Windows 7 worked beautifully. Be
-
Hey I'm new user of digital SLR. I have alpha 58 with 18-55 lens, can someone please tell me what are the best settings for taking good photos outdoors
-
WINDOWS MAIL FOLDER SORT SPACE FROM TOP TO BOTTOM ALPHABETICALLY
Hello, I have problems with local folders. I don't want WM to randomly hide behind other folders, but all list, in alphabetical order. Can I sort them in retrospect? Any help much appreciated. Concerning Brian
-
Hi all I have the Push api work as long as the JavaScript and the html page that calls are compiled locally. If I change the content "src" of external page on my server it will not work. No matter what work around on this?