Lines that do not migrated because of filters are saved somewhere?

Hi all

According to my understanding, if I put a constraint on the target table in the models and use the control flow through a seam in the interface, the lines that do not meet the constraint get connected to the table of errors E$.

I want to know that if I put some filters or join conditions on the source, the lines that are not migrated because of these filters, do they get connected anywhere. Until now, I used to check tables $ ca and my source and see that all lines have not migrate but is there any other table where the journal is maintained?

Thank you and best regards,
Prerna

Hey Loren,
You cannt see these documents. You must look in the backend... Let's say you have a filter SAL > 100 then you will get all information abot SAL<100. if="" you="" need,="" then="" you="" create="" one="" refresh="" variable="" based="" on=""><100 and="" get="" the="" count(*)="" or="" other="" possible="" information="" as="" per="">

Bottom line: ODI will occupy on those records satisfying the condition not others.

Thank you.
http://bhabaniranjan.com/

Tags: Business Intelligence

Similar Questions

  • I paid for software that is not downloadable, because I have vista. Can I get a refund from Microsoft?

    I paid for software that is not downloadable, because I have vista. Can I get a refund from Microsoft?

    Hello

    This is not Microsoft

    you don't say what the name of the software

    and there's an old saying: "buyer beware."

    and read this;

    always check the compatibility of vista programs on the link below

    http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

    If a program is compatible with vista you can try right click on the setup.exe, and then selecting run as administrator

    It is not compatible with vista, you can try running it in a previous operating system mode

    This does not work for all programs

    read the information below

    http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

  • Update trial version, but got and even that will not open because my email associated with the account configuration has changed, so I can't get into it at all. Adobe said that I can't change my email that I have to close my account and start a new. any w

    Update trial version, but got and even that will not open because my email associated with the account configuration has changed, so I can't get into it at all. Adobe said that I can't change my email that I have to close my account and start a new. any way around this? sounds to me ridiculous

    Contacted Adobe Support and they recommended to configure the new Adobe ID?

  • I can't not persistent install the latest update of Adobe Audition. It is not a CC version but came on disc in CS6. I constantly get this error message after you download the update that does not install: U43M1D207. What are the steps to complete t

    I can't not persistent install the latest update of Adobe Audition. It is not a CC version but came on disc in CS6. I constantly get this error message after you download the update that does not install: U43M1D207. What are the steps to perform this installation?

    Adobe Audition: For Macintosh

  • I have a wav file that will not open because there is no relationship.

    I was sent a "wav" file, but it does not open because it says that there is no program associated with the file.

    I was sent a "wav" file, but it does not open because it says that there is no program associated with the file.

    .wav files will open with Windows Media Player. If there is an attachment in the e-mail message, follow these steps. If it is already on your hard drive, just skip step 1.

    Create a file association.

    1. download and save the attachment to the office.
    2. right click on the saved file.
    3. Select: Open with on the shortcut menu.
    4. click on: choose [default] program.
    5. Select: Windows Media Player.
    6. check: always use the selected program to open this type of file.
    7. click on OK.

    This should allow you to open these attachments directly from email address now.

  • the neutrophilia help lines that do not have a match.

    I'm having a hell of a time trying to write a select statement that would choose to specific lines without match. hurt after a sample of my table and data below.

    creating the table

    CREATE TABLE "IDEA"
  (
    "CODE"        VARCHAR2(32 BYTE),
    "ACCOUNTCODE" VARCHAR2(32 BYTE),
    "DRCR"        VARCHAR2(20 BYTE),
    "ENTRYID"     VARCHAR2(32 BYTE),
    "JOURNALAMT"  NUMBER(17,2)
  )

    data in the table.

    INSERT INTO "IDEA" (CODE, ACCOUNTCODE, DRCR, ENTRYID, JOURNALAMT) VALUES ('Company', '7038', 'DR', '172863', '6.27')
INSERT INTO "IDEA" (CODE, ACCOUNTCODE, DRCR, ENTRYID, JOURNALAMT) VALUES ('Company', '7038', 'DR', '172863', '6.28')
INSERT INTO "IDEA" (CODE, ACCOUNTCODE, DRCR, ENTRYID, JOURNALAMT) VALUES ('Company', '1115', 'CR', '172863', '-12.55')
INSERT INTO "IDEA" (CODE, ACCOUNTCODE, DRCR, ENTRYID, JOURNALAMT) VALUES ('Company', '7038', 'DR', '172899', '0.25')
INSERT INTO "IDEA" (CODE, ACCOUNTCODE, DRCR, ENTRYID, JOURNALAMT) VALUES ('Company', '7038', 'DR', '172899', '0.25')
INSERT INTO "IDEA" (CODE, ACCOUNTCODE, DRCR, ENTRYID, JOURNALAMT) VALUES ('Company', '7038', 'DR', '172899', '197.25')
INSERT INTO "IDEA" (CODE, ACCOUNTCODE, DRCR, ENTRYID, JOURNALAMT) VALUES ('Company', '7038', 'DR', '172899', '197.25')
INSERT INTO "IDEA" (CODE, ACCOUNTCODE, DRCR, ENTRYID, JOURNALAMT) VALUES ('Company', '1115', 'CR', '172899', '-394.50')
INSERT INTO "IDEA" (CODE, ACCOUNTCODE, DRCR, ENTRYID, JOURNALAMT) VALUES ('Company', '7038', 'DR', '172903', '975')
INSERT INTO "IDEA" (CODE, ACCOUNTCODE, DRCR, ENTRYID, JOURNALAMT) VALUES ('Company', '7038', 'DR', '172903', '975')
INSERT INTO "IDEA" (CODE, ACCOUNTCODE, DRCR, ENTRYID, JOURNALAMT) VALUES ('Company', '1115', 'CR', '172903', '-1950')

    When I run the following query I have that would get the following result

    select
    --DRCR,
    ENTRYID,
    sum(JOURNALAMT)
   
From idea
group by entryid

    my top of the query output.

    "ENTRYID"                     "SUM(JOURNALAMT)"             
"172863"                      "0"                           
"172899"                      "0.5"                         
"172903"                      "0"                         

    I want to identify the lines that make up the 50.

    Please note that there might be 3 or 4 lines per credit. so it could be a football match of the 4DR same 5DR or 1 CR 1 CR however will always be 1 CR.

    I thought to write a plsql program that would try to match every single possible combination for 1 credit, but it seems to me that there is an easier way.

    any help would be grateful.

    Hello

    Here is a function that attempts to find a combination of 'DR' ranks with the entry ID given, whose journalamts correspond exactly to the amount given.  If If is such a combination, it returns a string that contains a list delimited by amounts.  You coould easily change this to return a list delimited by primary keys, or whatever you want:

    FUNCTION to CREATE or REPLACE dr_list
    (entryid_wanted IN idea.entryid%TYPE
    journalamt_wanted in NUMBERS
    prev_rowid IN DEFAULT NULL ROWID
    )
    RETURN VARCHAR2
    IS
    "failure_message VARCHAR2 (50): = '(aucune correspondance trouvée);
    remainder_list VARCHAR2 (4000);
    return_list VARCHAR2 (4000);
    BEGIN
    IF journalamt_wanted > 0
    THEN
    return_list: = failure_message;   -Are likely to be replaced later

    -Find each line that may be part of a solution
    FOR (IN) r
    SELECT journalamt
    R_id AS ROWID
    The IDEA
    WHERE Drcr = "DR".
    AND entryid = entryid_wanted
    AND journalamt > 0 - if necessary
    LNNVL (ROWID, AND<=>
    ORDER BY ROWID
    )
    LOOP
    IF r.journalamt = journalamt_wanted
    SO - This line is a solution alone
    return_list: = r.journalamt;
    EXIT;
    On the OTHER - see if this line belongs to a bigger solution
    remainder_list: = dr_list (entryid_wanted
    , journalamt_wanted - r.journalamt
    r.r_id
    );
    IF remainder_list <> failure_message
    THEN
    return_list: = r.journalamt | ', ' || remainder_list;
    EXIT;
    END IF;
    END IF;
    END LOOP;
    END IF;

    RETURN return_list;
    END dr_list;
    /

    You can use the function in a query like this:

    SELECT EntryID

    SUM (journalamt) AS total_amt

    , dr_list (entryid, SUM (journalamt)) AS extra_drs

    The IDEA

    GROUP BY entryid

    ;

    and it could produce an output like this:

    ENTRYID TOTAL_AMT EXTRA_DRS
    ---------- ---------- ------------------------------
    172903 0
    172863 0
    172899.5.25,.25
    8 987 (no match)
    901 5 2, 2, 1

    Note that when you call the function, pass you the arguemnts only 2.  The 3rd argument is used only by the function when it calls itself.

  • Deleting lines that do not meet the IF condition in the report of BEEP

    Hello

    We must be able to remove lines of our CRI BEEP that does not meet the conditions IF that causes the report BEEP to have hundreds of blank pages.

    I tried the code @INLINES on the foreach and IF statements, without result.

    Can someone help us please with it?

    Thank you

    Check your Inbox that I sent that you updated model as long as you need.

  • My screen has a vertical yellow line that will not disappear whenever my laptop dv7t is powered on.

    1. product name and number:

    HP Pavilion dv7 Notebook PC

    A3F79AV

    2. operating system: Windows 7 64-bit

    3. error message (no)

    4 changes leading to the error: (none)

    5 description:

    A yellow line appears when I turn on the PC (most recently the case today).  The line appears on the chest and OS splash pages and above all content Office happens to be located underneath.  It extends to full height and is about 70 to 80 pixels from the right edge of the screen.  It seems to be 1 pixel wide - it is the same width as the lines in the box blue lassoo I get by clicking and dragging through the office.

    Because I have not seen this line interact with the operating system or application software, and it is in front of all the information are displayed, I'm guessing that it's a hardware problem on the LCD screen.

    Any suggestions?

    Thanks in advance

    Quick update to the original poster:

    I have discussed this with the HP technical support and they had me check that the line of pixels is in the BIOS screen as well.  It is as I suspected there is a LCD issue.  I can post the PC to get a new LCD in there.  You wonder why they can't replace it on the site (which I paid for).  Time to back up the hard drive...

  • Location tempInit (what is this?) Syntax errors 1084 &amp; 1086 in the lines that do not exist.

    I get the following errors:

    tempInit, line 2801084: syntax error: expecting identifier before true.

    tempInit, line 2801086: syntax error: expecting semicolon before point.

    tempInit, line 3761084: syntax error: expecting identifier before false.

    tempInit, line 3761086: syntax error: expecting semicolon before point.

    I don't know where tempInit is the place and I know not where lines 280 or 376 are because I have only 111 lines of ActionScript!  I don't know where to start.

    Any help would be appreciated.

    Well, OK.  The problem was that I had named case of a seizure of text field 'true' and 'false '.

    Oy.

  • How to get an average displacement of the last 5 lines that were NOT NULL?

    I have a question involving a moving average, and it works fine using:

    AVG (col_x) more (partition col_a, col_b, col_c lines between 5 preceding and 1 preceding arrested)

    However, I want to change this option to give the average of the last 5 lines which were non-null.  Does anyone know how to do?

    For example:

    create table sample_table)

    col_a varchar2 (10),

    date of col_b,

    col_c number (2),

    col_x number (5.2)

    );

    insert into sample_table values ('X', trunc (sysdate), 1, 1);

    insert into sample_table values ('X', trunc (sysdate), 2, 2);

    insert into sample_table values ('X', trunc (sysdate), 3, 3);

    insert into sample_table values ('X', trunc (sysdate), 4, 4);

    insert into sample_table values ('X', trunc (sysdate), 5, 5);

    insert into sample_table values ('X', trunc (sysdate), 6, 6);

    insert into sample_table values ('X', trunc (sysdate), 7, 7);

    insert into sample_table values ('X', trunc (sysdate), 8, null);

    insert into sample_table values ('X', trunc (sysdate), 9, null);

    insert into sample_table values ('X', trunc (sysdate), 10, null);

    insert into sample_table values ('X', trunc (sysdate), 11, null);

    insert into sample_table values ('X', trunc (sysdate), 12, null);

    insert into sample_table values ('X', trunc (sysdate), 13, null);

    insert into sample_table values ('X', trunc (sysdate), 14, null);

    insert into sample_table values ('X', trunc (sysdate), 15, null);

    Select t.*,

    AVG (col_x) on myavg (partition col_a, col_b, col_c lines between 5 preceding and 1 preceding arrested)

    of sample_table t

    order by 1,2,3;

    COL_A, COL_B, COL_C MYAVG COL_X

    ---------- ----------- ----- ------- ----------

    X 15/01/2015 1 1.00

    X 15/01/2015 2 2.00 1

    X 15/01/2015 3 3.00 1.5

    X 15/01/2015 4 4,00 2

    X 15/01/2015 5 5.00 2.5

    X 15/01/2015 6 6.00 3

    X 15/01/2015 7 7.00 4

    X 15/01/2015 8 5

    X 15/01/2015 9 5.5

    15/01/2015 X 10 6

    X 15/01/2015 11 6.5

    X 15/01/2015 12 7

    15/01/2015 X 13

    15/01/2015 X 14

    X 15/01/2015 15

    15 selected lines

    What I really want is:

    COL_A, COL_B, COL_C MYAVG COL_X

    ---------- ----------- ----- ------- ----------

    X 15/01/2015 1 1.00

    X 15/01/2015 2 2.00 1

    X 15/01/2015 3 3.00 1.5

    X 15/01/2015 4 4,00 2

    X 15/01/2015 5 5.00 2.5

    X 15/01/2015 6 6.00 3

    X 15/01/2015 7 7.00 4

    X 15/01/2015 8 4

    X 15/01/2015 9 4

    X 15/01/2015 10 4

    X 15/01/2015 11 4

    X 15/01/2015 12 4

    X 15/01/2015 13 4

    X 15/01/2015 14 4

    X 15/01/2015 15 4

    15 selected lines


    concerning

    Neil

    Hello

    Here's one way:

    WITH got_avg AS

    (

    SELECT T.*

    AVG (col_x) OVER (PARTITION BY col_a, NVL2 (col_x, 1, 0)

    ORDER BY col_b, col_c

    LINES BETWEEN 5 PRECEDING

    AND 1 PRECEDING

    ) AS myavg

    OF sample_table t

    )

    SELECT col_a, col_b, col_c, col_x

    LAST_VALUE (myavg IGNORE NULLS) over (PARTITION BY col_a

    ORDER BY col_b, col_c

    ) AS myavg

    OF got_avg

    ORDER BY col_a, col_b, col_c

    ;

    Too bad, that we cannot use the IGNORE NULLS with AVG function.

  • Collections by ignoring the lines that were not updated

    Hi all
    I have a report based on a collection. In the present report is a lov in which a user can assign a value to the recording. However, the user doesn't have to update all records before saving. Based on the examples of the collection I've seen, it seems to be an assumption that all records will be updated. I'm having trouble trying to update only the lines in the collection that the user has entered a value for.

    Any ideas would be greatly appreciated.

    Thank you

    Don't know what you have in mind. If you are thinking to add another value of the column to the collection and handling, it should work better than the box. You will have at least a NULL value or a value of text associated with each line in your collection.

  • I have a sony TRV 240 camcorder that does not work because the system cannot find a driver

    I have a new computer windows 7, downloaded filmmaker and it does not recognize my camera says driver failed. What should I do to load videos down?

    I have a new computer windows 7, downloaded filmmaker and it does not recognize my camera says driver failed. What should I do to load videos down?

    =============================================
    Windows 7 was designed to import video from MiniDV
    Tapes... THROUGH THE... IEEE 1394 FireWire (Sony i.LINK) connection

    Your Sony's Digital 8 instead of MiniDV, so I don't know if it meets the requirements

    The following items may be worth a visit:

    How to import videos in Windows Live Movie Maker
    http://www.Dummies.com/how-to/content/how-to-import-videos-into-Windows-Live-Movie-Maker.Navid-323836.html

    How to import pictures and videos from cameras and other devices
    http://Windows.Microsoft.com/en-us/Windows-Live/Movie-Maker-import-photos-videos-camera-FAQ

    Another possibility would be to use a device to Capture video as the
    following example:

    Capture device video One Touch Diamond VC500
    http://www.Amazon.com/Diamond-VC500-touch-capture-device/DP/B000VM60I8/ref=sr_1_fkmr0_3?ie=UTF8&QID=1294018745&SR=8-3-fkmr0

    Good luck...

  • HP photosmart c6180 all-in-one: does not print because some cartridges are empty

    I want to just print in black and white, but because some of my color cartridges are empty it does not print.  If I don't want to use the color why is it important?  Please notify.  I can't afford a new set of cartridges of color... and I don't want to print in color, so it shouldn't matter!

    Hello

    To protect against damage, it will not stop if no available in any ink cartridge. I need all the inks in the heating of the process.

    Kind regards.

  • Download rows that do not exist in the following tables.

    Hello

    I need to implement certain points of view in order to compare the systems.
    This view will compare the tables with the same structure and I need to extract lines that do not exist in one of the sides.
    I need to implement some points of view to not compare only two tables, others to compare the 3 tables and compare the 5 tables and another to compare the 10 tables!
    Each table can contains a few lines to a maximum of 10 million rows (it was the highest number that I found for this tables).

    My test scenario:
    CREATE TABLE TEST_TABLE
(COL1 NUMBER ,
COL2 CHAR(25));

CREATE TABLE TEST_TABLE2
(COL1 NUMBER ,
COL2 CHAR(25));

CREATE TABLE TEST_TABLE3
(COL1 NUMBER ,
COL2 CHAR(25));


insert into TEST_TABLE (COL1,COL2) values (1,'2');
insert into TEST_TABLE (COL1,COL2) values (11,'t1');
insert into TEST_TABLE2 (COL1,COL2)  values (1,'2');
insert into TEST_TABLE2 (COL1,COL2) values (22,'t2');
insert into TEST_TABLE3 (COL1,COL2) values (1,'2');
insert into TEST_TABLE3 (COL1,COL2) values (33,'t3');
    To find the differences between two tables, I've implemented the following:
    select * from
(
(select * from TEST_TABLE
minus
select * from TEST_TABLE2
)
union all
(select * from TEST_TABLE2
minus
select * from TEST_TABLE
)
)

Result:
COL1 COL2
11     t1                       
22     t2                      
    For the comparison of 3 tables, the result should be:
    Result:
COL1 COL2
11     t1                       
22     t2                       
33     t3                      
    For others, I can implement the same way, but for sure, this isn't the prettiest and best performing solution!

    How can I get the result I'm going with the more performance?

    Thank you
    Ricardo Tomas

    You did not say if you allow duplicates in your tables, so I assumed that you do not have.

    If a single table may have multiple occurrences of a given col1, col2 combination you will need to separate the col1, col2 list each table before making the union of all.

    ME_XE?  select
  2     col1, col2
  3  from
  4  (
  5     select col1, col2       from test_table
  6             union all
  7     select col1, col2       from test_table2
  8             union all
  9     select col1, col2       from test_table3
 10  )
 11  group by
 12     col1, col2
 13  having count(*) = 1;

              COL1 COL2
------------------ --------------------------------------
                33 t3
                22 t2
                11 t1

3 rows selected.

Elapsed: 00:00:00.01
ME_XE?

  • compare the data and the output data that do not exist

    Hello
    I've written a procedure to insert data into a table 3 where I compare the data between two tables, if it matches it insert in the table test_a Joanie. If the exists not or other tables i.e. test_code and test_type it should output this data, where there is no. my code works for a single table, which is test_code. It's not DBMS display a line that is not in the table test_type. could just tell my why? Assume that if test_code a line which is only not in test_type it should out saying this line of incompatibilities with test_type and vice versa.

    -Here's my code

    Test of CREATE OR REPLACE PROCEDURE. GET_data
    IS

    BEGIN
    DELETE test.test_a;
    FOR c IN (select a.cCODE,
    a.type,
    a.Indicator,
    RTrim (xmlagg (xmlelement (e, a.codenum |))) (') a.codenum order) .extract ('/ / text()'), ',') codeNUMber.
    b.CCODE cc,
    b.type tp,
    b.Indicator ind
    test.test_code a, test.test_type b
    where a.ccode = b.ccode (+)
    AND a.type = b.type (+)
    AND a.indicator = b.indicator (+)
    Group of a.ccode, a.type, a.indicator, b.CCODE, b.type, b.indicator
    order of a.ccode)
    LOOP
    BEGIN
    IF (c.cCODE = C.c.c.
    AND C.type = C.tp
    AND C.indicator = C.ind
    AND C.SYS_IND = C.SYSIND) THEN
    insert into test.test_a (CCODE, type indicator)
    values (C.cCODE, C.type, C.indicator);
    ON THE OTHER
    dbms_output.put_line (' rules for cCODE issue: ' |) C.cCODE);
    dbms_output.put_line ('type: ' |) C.type);
    dbms_output.put_line (' indicator: ' |) C.Indicator);
    dbms_output.put_line (' problem of rules for CC: ' |) C.C.C.) ;
    dbms_output.put_line ('tp: ' |) C.TP);
    dbms_output.put_line ('ind: ' |) C.IND);
    END IF;
    EXCEPTION
    WHILE OTHERS THEN
    dbms_output.put_line (' rules for cCODE issue: ' |) C.cCODE);
    dbms_output.put_line ('type: ' |) C.type);
    dbms_output.put_line (' indicator: ' |) C.Indicator);
    dbms_output.put_line (' problem of rules for CC: ' |) C.C.C.) ;
    dbms_output.put_line ('tp: ' |) C.TP);
    dbms_output.put_line ('ind: ' |) C.IND);
    END;
    end loop;
    commit;
    END;
    /


    Thank you

    You must use a FULL OUTER JOIN instead an OUTER JOIN for this.

    Just curious, why do you need to use dbms_output instead to execute the SQL query with additional conditions (if part of your procedure)?. You can use two times, one to insert those that match and one for the selection of others who do not match.

    Kind regards.

Maybe you are looking for