Link to activate the HP Smart printing gives the file name with "_msi" instead of ".msi"!

Similar Questions

• error the file name with accent passed to GetFileDate()

  Hello

  When passing a file or a file that belongs to a path that has one of its names of folders containing a character accentuated to GetFileDate(), I get an error of library function (return value == - 1). For example, all the files in the folder 'Eéprom' return an error. Can anyone please help on how to solve this problem?

  Thank you!

  (LabWindowsCVI 9.0 / Windows 2000 / CVIRTE2009)

  Basically, you only add an additional line of printing to your function that creates the BAT file.

  Similar to this:

  fprintf (bat_file, "@echo off\n");

  fprintf (bat_file, "chcp 1252\n");
  fprintf (bat_file, "dir/s/b a - D \"%s\\*.*\"" > \"%s\"\n ", directory, TxtFile);

  This should set the code page of the console in which runs your BAT file, so that the dir command will be able to output the accents properly.

• LR 2.4 now changes the file names with the suffix - 2 when importing

  On Vista...

  was perfectly ok, but suddenly it adds now suffix-2 to all files when importing... and this can be seen in the Explorer to do!

  Do not change parameter.

  Have checked all the settings / options that I can find, but can't find what does it... the damned that is annoying when importing of large amounts of files (a couple).

  Any suggestions please?

  I'll try all of the suggestions, even if I already did... Thank you very much.

  ... will be here for 4 days... Why choose a destination vacation without internet access? !!! ???

  In catalog settings, file management you can set sequence number of import, you can set it to start at 2.

  In the import dialog itself that you have a wide choice of naming conventions in the drop-down list of file naming, if value Filename or custom - order of the name it will apply the sequence as shown in the catalog settings.

• How can I print just the file names listed in a window of Windows 7?

  How can I print just the file names listed in a window of Windows 7?

  I found the info in this post...
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-files/for-Windows-7-can-i-print-a-listing-of-what-is-in/b233cbeb-647d-4E32-ae1f-8523d62b2dc9

  Here, a link takes me to an article at this link...
  http://support.Microsoft.com/kb/321379

  This article explains then that I need to download and run blindly 'Fix - It' application to obtain the simple ability to print a directory window... but it does not say what I'd do once downloaded the general application of "Fix - It" to get this option which should be part of the Windows 7 basic features first.

  Or, the article told me that I can "modify the registry" (?) in order to get the print option window... but I know that by having a character moved when editing the registry, it can bring down the entire computer and make it completely unusable.

  Those are really the only options to print all simply a window?... in addition to several screenshots and melted together in Photoshop and then print this image?

  Why not just give Windows 7 a 'PRINT' button under 'FILE' as other operating systems have always done... has always done Windows default this feature?

  This seems just crazy... This misunderstanding?

  Thank you

  NuMetro

  I tried to copy and paste the name of the window... This time I tried while holding down the SHIFT key and it sticks anything in Notepad.

  This is not what I've proposed.

  • Select the files whose names you want to print. CTRL + A selects all.
  • Hold the SHIFT key, then right click on a file and select copy in the path from the context menu. This will put a list of filenames (path) to the Windows Clipboard.
  • Click inside a document, and the stick.

  Have another go.

  Noel

• Adobe PDF printer crashes when you paste into the file name field

  Hello, first off there is no similar problem with all freeware pdf printers so I want to remove my config system as being the culprit. This only happens in Adobe PDF format.

  How to reproduce the problem? Have something in your Clipboard and try to paste it into the file name field when you print the file in pdf format - you should have now crashed everything that you were trying to print and the program behind it.

  Please make a fix for this, it is ridiculous that I have to install a second, freeware, pdf printer because thousand dollar software does not work properly. And I've lost tons of recipes and work this way.

  Solution is not to copy and paste into the save box.

  I found that this happens in programs other than Thunderbird and the reason why the freeware application works is that you paste into the window of the application instead of Windows' save box.

• Titles or subtitles of the file name?

  Is it possible to automatically generate the titles or subtitles of the file name? I have a video made up of several small files and you need to insert their names under the name of a chapter, or at least as a subtitle. FCPX only supports to support the generation of TC.

  The short answer (obtuse) is not. Not in FCPX alone.

  I seriously doubt you will be interested in this procedure, but someone might be.

  You need movement (this is the only expense here), TextWrangler and a droplet of Automator (see below).

  First, gather all your files of clips in a folder.

  Drop the file on the files in the folder (the automator app/drop) that will create a text file with the names of all files in the folder. When you are prompted to save the file, you can name it and save it wherever you want.

  Gout Gets the names of files from the Finder, and they are complete paths, such as:

  / Users/fx/Desktop/txtLicenses/Aardvark Cafe readme.txt

  [You can download a copy of the 'Files in the folder' drop HERE ]

  Open a window in TextWrangler, and then drag the text file to a blank page (very cool - TextWrangler automatically opens the file with drag and drop.) [TextWrangler is FREE of Barebones.com (http://www.barebones.com/products/textwrangler/) software, everyone should have a copy! The most recent version is 5.0.2 in date 25/12/2015]

  Type the command + F to open the Find/Replace dialog box. Make sure that Grep is checked.

  To find them, use this regex:

  .*\/(.+)\.. +

  [translated: find everything up to and including the last ' / ' character, can find everything up to the last period and save it as a game (the parenthesis) and then find everything at the end of the line]

  As an alternative, use:

  \1\n

  [Translated: prints the substring and adds a newline character - it will be double space lines of text]

  In the drop-down menu with the label of 'g', save... (model - something like Remove Path and FileType) so you can find it again easily.

  The text from the above example will become:

  Aardvark Cafe readme

  [and will follow an empty line]

  [I recommend you do all your spelling at this point.] Make sure that all text is as you want it to appear in FCPX. Repair later gets a bit dicey. and generally it is a good idea to start over if you need to make changes to the text file.]

  Save the file with another file in TXT format.

  On the move:

  Create a project generator. It can be almost any length, so accept the default value of 10 seconds. You will be stretching out in FCPX in any case.

  Add: Generators > text > file

  [You can use the Inspector to Format to choose the font, size, etc. and the inspector looks for color and 3D options].

  In the Inspector of the generator, find the section, load your text file

  Set the speed to Custom

  Reset the Custom speed setting

  Publish the speed of Custom setting slider

  Save in FCPX (and create a category called subtitles)

  When you save the generator in FCPX, the file being used is hard-copied in the media for access folder. You cannot publish the setting browse generator, so all files subtitles prepared in this way are projects of "One Shot". You can throw away them once your project is completed because their utility essentially died with the FCPX project.

  In FCPX, apply the generator to the plot and develop it to adapt to the length.

  Keyframe of the lines of text to match the timing of your video. This is where double spacing will be useful because it is a real pain in simple lines of keyframe and you will need a bit of space for a step-by-step. You can, of course, import the audio portion of your story in motion, create a project for quite a long time for the entire length and key image subtitles in movement. You can export as, eventually, the subtitle project as ProRes (if you do not use 4444, then you can apply the Composite blend mode add to the layer that you use in FCPX as the background should be black.)

  If all of your clips are the same length of time, then using the subtitle generator is a snap. Set a keyframe at 0 for the appearance of the first line and in the end, the last line should appear, simply drag the speed until the last line shows control (should be at or close to 100%). The generator systematically displays a single line both throughout the progression of his 'read'

  I found that the faster is to import the audio in motion and create a Motion project, the length of the audio used for subtitles + a little extra at the end.  Listen to the audio, and for each line that you display, add a keyframe... little whatever it is. When there is a keyframe for each line, listen again and adjust keyframe values to display the line. This will leave you with linear transitions from one image to another key (and overlapping in some cases, or the appearance of lines before image real key because of "Rounding errors") - is NOT a problem! Just select 1 keyframe, type command + A to select all the keyframes, and then right-click on a keyframe and select constant on the menu drop down. This will create a step-by-step through each value and you give the * discreet * timing you have need for the text to appear at the right time.  Remove the audio track and save the project as a generator of FCPX... it is faster and easier to export a track video overlay.

  You need movement 5.1.x or better (there are serious problems with 5.0 versions and file generator.)

  I know it doesn't look like it, but this method of captioning is much easier than ANY other software of captioning I've tried in the past... NO timecode or the special formatting is required... other recommended spacing to double.

  HTH

• "How to print a file that I saved on"Print to a file"option" with my C4795 All in One printer?

  "How to print a file that I saved on"Print to a file"option" with my C4795 All in One printer?

  I did a bit of research, and this is a better solution. Please download a small utility that will help you to easily print the file. Here is the link to the software:

  http://www.Lerup.com/PrintFile/

• I have problem with a .iso file that when I want to use I face the error "the file name is too long.

  Original title: name of a file

  Hello

  I have problem with a file .iso that when I want to use I'm dealing with error "the file name is too long" and I can't use this file anywhere for example: vmvare ' untraiso and even if I cannot write to cd or make a boot USB.

  I don't know how fix it.how I rename the file iso, shorter that I can use?

  Please help me.

  Thank you.

  Right-click on the ISO > rename > give a short name

• To sort the list of files by time not the file name.

  Original title: created the new toolbar on the sort option for changing the taskbar.

  I created a new toolbar on the taskbar, and it is directed to a folder in my network. When I click the new button on the toolbar, it opens subfolders sorted by filemane. Then, open the sufolders with files sorted by filemane.

  I want to sort the list of files per hour not the file name. is it possible to change this?

  Here's what I did.

  I right click on the taskbar - selected toolbars - selected new toolbar - selected the folder on my network.

  When I click the double chevron right the new toolbar button, it opens the files in this folder, and then I select a subfolder and an another subfolder then the individual wave in this final folder files. There are more than 300 wave files in this folder. It sorts thenm by file name which is a randomly assigned file name by the used recording software. I want to sort the files by time instead of file name. is this possible?

  Hi Jeffrey,.

  How many computers are present in the network?

  You can follow this link & check id the issue persists:

  How to arrange files using folder views in Windows XP?

  Reference: The order of sorting files and folders whose names contain numerals is different in Windows Vista, Windows XP and Windows Server 2003, in Windows 2000

  Hope the helps of information.

• Error on startup: "application (the file name is) is not a valid windows image, check against your installation diskette."

  computer startup happens on the screen with "application (the file name is) is not a valid windows image, check against your installation diskette." It can be any name of a file that appears, if I click ok it will.  Anyone know what I should do now. Thank you

  Hi LorraineMatthews,

  ·         Did you do changes on the computer before the show?

  ·         What is the exact error message?

  ·         Are you able to boot to the desktop?

  Follow these methods.

  Method 1: Follow these steps:

  Step 1: Start the computer in safe mode and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After the boot minimum troubleshooting steps, follow section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start and then click Run.

  (b) type msconfig and click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal Startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 2: Scan the file system (CFS) auditor to repair corrupted files.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

• How can I have the file name as visible caption on the photo

  I have several hundred digital images that I have edited and saved with a meaningful file name.  I would like to produce a slide show and then burn to DVD with the name of the file as a legend, preferably (but not necessarily) without the file name extension (for example, my photo.jpg would show as 'my picture').

  I (Pinnacle Studio) software that will import photos or DVD, and I'll create my slide show with Studio, since I am familiar with this software, but the Studio does not automatically create captions.  Re-type the captions for each slide will be intensive work and maybe isn't necessary.  I have a couple of programs that will produce a legend using the file name, but they are old and do not have an option to burn a DVD - only to run the slide show from the software owner.  I also Ulead FT 6 and Adobe PS Elements 6.  I am running Vista and have another computer with XP, so I have the photo editing software that comes with those.  I haven't found something that will prepare a folder of photos by file name as legend I can burn on a DVD.

  searching on the Internet I found a few programs for sale that seem to have the ability to do what I want, but I have hundreds of programs, and I don't want to buy another for only this seemingly simple task.  There are shareware/freeware/trialware which will allow me to display the file name as captions for photos and then burn a DVD or create a file that I can burn it with Nero for import into Studio 12 or 14 Studio?

  I have several hundred digital images that I have edited and saved with a meaningful file name.  I would like to produce a slide show and then burn to DVD with the name of the file as a legend, preferably without the file name extension (for example, my photo.jpg would show as 'my picture').

  I (Pinnacle Studio) software that will import photos or DVD, and I'll create my slide show with Studio, since I am familiar with this software, but the Studio does not automatically create captions.  Re-type the captions for each slide will be intensive work and maybe isn't necessary.  I have a couple of programs that will produce a legend using the file name, but they are old and do not have an option to burn a DVD - only to run the slide show from the software owner.  I also Ulead FT 6 and Adobe PS Elements 6.  I am running Vista and have another computer with XP, so I have the photo editing software that comes with those.  I haven't found something that allows to print a file of pictures with the file name as legend I can burn on a DVD.

  searching on the Internet I found a few programs for sale that seem to have the ability to do what I want, but I have hundreds of programs, and I don't want to buy another for only this seemingly simple task.  There are shareware/freeware/trialware which will allow me to display the file name as captions for photos and then burn a DVD or create a file that I can burn it with Nero for import into Studio 12 or 14 Studio?

  ==================================
  FastStone Image Viewer freeware can
  be useful to experiment.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  FastStone Image Viewer
  http://www.FastStone.org/FSViewerDetail.htm

  Add file names:

  I suggest that you create a new folder and add
  copies of your photos for experimental purposes.
  If you are unhappy with the result your originals
  will be intact.

  How to:

  "Basic steps to add text to the image files.
  using Fast Stone Image Viewer"

  Tools / Batch convert / Batch Convert tab...

  Check the box... Use of advanced options...

  Advanced Options button / tab text.
  Check the box... Add text...

  Open the window drop... "Insert a Variable."
  choose... The file name / no Extension... Ok...

  Add the files you want to add...

  Choose an output Format...

  Choose an output folder...

  Click on the button convert...

  (You will need to experiment with the position and the police
  size and color to get the desired result.)

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Want the file names to work as captions

  Hello, I am about to create a DVD of photos and music from an audio CD.  I've never used Windows Media Center before, but plan to use for this project.  Before we go too far, I would like to know how to have my file names to display on each photo - as a legend.  And I don't want the file extension that you want to display.  Can someone tell me how to save the pictures correctly for this purpose?  Thank you, Susan

  FastStone Image Viewer freeware can add
  file names in the face of your photos in a batch.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  FastStone Image Viewer
  http://www.FastStone.org/FSViewerDetail.htm
  (Windows XP / Vista / 7) (on the screen to download...
  try... exe (site 2) for easier downloading)

  I suggest that you create a new folder and add
  copies of your photos for experimental purposes.
  If you are unhappy with the result your originals
  will be intact.

  After FastStone is downloaded and installed...
  Open the program and go...

  Tools / open the Batch Conversion / tab Batch convert...

  Check the box... Use of advanced options...

  Advanced Options button / tab text.
  Check the box... Add text...

  (You will need to experiment with the position and the police
  size and color to get the desired result.)
  (the text size will need to be adjusted according to the)
  the size of the photos)

  Open the window drop... "Insert a Variable."
  choose... The file name / no Extension...
  (in the white field you should see ($C1)
  Left click... Ok

  On the Batch tab convert... in the left field...
  Find and select the photos you want to
  Add.

  Left, click on the Add button to move the files to
  the right field.

  Choose an output Format...

  Choose an output folder...

  Click on the button convert...

  It's much easier to do than to explain then
  give it a try before say you "Good Grief... it's too
  a lot of work.

  BTW... when your photos are ready... try to import
  in creation of Windows DVD to create your video
  slide show.

  Windows Vista - Windows DVD Maker - burn video disc
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-DVD-video-disc

• Microsoft, I am unable to delete a file, the file name isSHREDDER

  • I'm unable to delete a file, the file name is DESTROYER.
  • u tell me what to do.

  What is a 'file' or a shortcut? You have not given information about the nature of this "Shredder" "file."

  Did you do one search for others this problem? Here is a link.

  http://www.computing.NET/answers/Windows-Vista/i-cant-removed-Shredder-icon-on-destop/5799.html

• Error message: "the file names would be too long for the destination folder.

  I move the files from internal hard drive to external hard drive using cut and paste.  I get a message "the file name would be too long for the destination folder.  You can shorten the file name and try again, or try a location with a shorter path. "I then gives me choices to skip or cancel.  What happens to files that are ignored?  Are they deleted?  I don't want to lose all the data, but there are more 2 000 files with this problem, so passing by and rename each one really isn't a viable solution.  I don't really understand how the file names were originally created/saved about a problem that is only now that I want to move them.  The disc source and destination are NTFS.  Is there a solution for this?  It is imperative that no data is lost.  Thanks for any help you can offer.

  On Wednesday, 10 April 2013, 12:16:23 + 0000, MADinIowa wrote:

  I move the files from internal hard drive to external hard drive using cut and paste.  I get a message "the file name would be too long for the destination folder.  You can shorten the file name and try again, or try a location with a shorter path. "I then gives me choices to skip or cancel.  What happens to files that are ignored?  Are they deleted?

  N ° to check that what I say is correct, create a new folder
  for the purposes of the trial and to make a copy of some files. To ensure that
  one of them has a long name (rename if necessary), and then try to copy
  These files on the external drive. When you get the message, choose
  'jump' and see what happens.

• Cannot right click Windows 7 Explorer of files to generate the copy of the file names in a Notepad or Excel-compatible file. HELP REQUESTED!

  I struggled for several hours to restore the service right click that I used to have XP to Windows 7.  I need to save lists of file names such as displayed in the file Explorer. Allowing you to right-click and save files in Notepad. This option has been removed in Windows 7 and anything put in place to restore it.

  I have lists of items in the inventory and need to copy and paste the image corresponding to a transfer sheet to allow the server names to match images in article SKU.  The file names are long and typing is a complete waste of time.

  I used to be able to find them in the Windows Explorer, right-click on the directory and generate a txt file that I could open in Notepad or Excel.  -Easy.  Now right-click only allows an export in an uneditable image in ONE NOTE. This is useless for me. I can't do anything with an image file - I need the editable data.

  Is there a solution?  I need only the file name and extension, not the full path, in a text or spreadsheet document propagation.

  I had used the Microsoft solution to install their dose without knowing the final format was a NOTE image file format and not a simple txt file. I try now too write the batch file:

  %windir%\Printdir.bat

  or edit it in order to keep the file in Notepad and do not make the final conversion into a single Note.

  The problem is that the fix from Microsoft, designed to fix this problem, has placed the conversion file in the root directory and it cannot be overwritten.  I refused the possibility to delete, edit or write the file due to the requirements of administrative privilege mandated by the security of Windows 7 too much.

  So if anyone has a solution to every problem - that would help - I am very tired and frustrated and not happy with Microsoft.  Their zealous concern with security made their unnecessary programs for me and have further discouraged me to convert to the windows 10. frustrations and nightmares are waiting for me there I can't imagine.  What I really want to do at this point is to go back to XP.

  He ate five hours of my day. I don't have the time to fight like that. I am trying to be productive, but all I got are monumental technical walls and roadblocks - often designed into the system. Frustrating doesn't begin to describe it.

  Found a solution on a Web site:

  http://www.watchingthenet.com/how-to-print-a-directory-tree-from-Windows-Explorer.html

  They said it was for VISTA, but worked for me under Windows 7. You will need to use Notepad to the command prompt and select run as administrator to save the file in the root directory.

  Thanks for the help.

  Cheers.