Link to maps software iSCSI NIC vmkernal and the vsphere client

Similar Questions

• ESXi 5.5u1 added iscsi storage adapter - reboot and now vSphere Client could not connect to "my ip" an unknown error has occurred.  The server could not interpret the customer's request.  The remote server returned an error (503) server unavailable

  I have not yet connect to an iSCSI target device.

  I can ping my host

  when I open http:// "hostip" in a web browser, I get a 503 service not available.

  restart the host gets me nowhere.

  SSH opens somehow, but can not connect

  Console seems OK

  vSphere Client can not connect

  If I reset to the default values of the console it is ok, but when I reconfigure the host, this error will be returned.

  I tried to reinstall from DVD

  I'm completely corrected to date via SSH esxcli

  This happens on both my hosts, although they are almost identical Lenovo thinkserver TS140s with broadcom 10Gig NIC and intel NETWORK card integrated

  It almost always seems to happen the next time I reboot after enabling iscsi support

  The only weird thing I have is that my Integrated NIC is a processor intel 217's and I have to use a special VIB so that it can be used in ESXi

  Customer's winning 8.1

  Here is my installation notes

  Install on USB/SSD stick with custimized ISO i217 NIC driver, reset the configuration and reboot

  Management NIC set to NIC0:1Gig

  IP management: hostIP/24 GW: my gateway

  DNS:DNS on windows vm1, vm2 Windows dns

  HostName:ESXi1.Sub.myregistereddomainname custom DNS Suffixes: sub.myregistereddomainname

  Reset

  Patch to date (https://www.youtube.com/watch?v=_O0Pac0a6g8)

  Download the VIB and .zip in a data store using the vSphere Client

  To get them (https://www.vmware.com/patchmgr/findPatch.portal)

  Start the SSH ESXi service and establish a Putty SSH connection to the ESXi server.

  Put the ESXi server in maintenance mode,

  example of order: software esxcli vib install /vmfs/volumes/ESXi2-2/patch/ESXi550-201404020.zip d

  Re install the Intel 217 NIC driver if removed by patch

  Change acceptance ESXi host sustained community level,

  command: esxcli software - acceptance-level = CommunitySupported

  Install the VIB

  command:esxcli vib software install - v /vmfs/volumes/datastore1/net-e1000e-2.3.2.x86_64.vib

  command: restart

  Connect via VSphere client

  -Storage

  Check/fix/create local storage. VMFS5

  -Networking

  vSwitch0

  Check vmnic0 (1)

  Network port group rename VM to the 'essential '.

  Rename management group of network ports for management of basic-VMkernel traffic.

  -Configuration time

  Enable NTP Client to start and stop the host. ntp.org set 0-3 time servers

  DNS and routing

  Start the virtual machine and stop

  -enable - continue immediately if tools start - stop - prompted action Shutdown - the two delay to 10 seconds

  Security profile

  Services

  SSH - startup - enable the start and stop with host

  Cache host configuration

  -Properties to start SSD - allocate 40GB for the cache host.

  Flashing warnings SSH:

  Advanced settings, UserVars, UserVars.SuppressShellWarning, change from 0 to 1.

  Storage adapters

  -Add - add-in adapter software iSCSI

  I think I saw that I was wrong.  In fact, I applied two patches when only suited. I started with 5.5u1rollup2 and then applied the ESXi550-201404001 and ESXi550-201404020.  Strangely I did not t o had problems until I worked with iSCSI.

• Install the MDW and the mobile client on the same platform

  Hi all

  We implement our 11g Oracle Database Server from Mobile environment and I was confused about something I read in the Release Notes (http://docs.oracle.com/cd/E22663_01/doc.11100/e22675.pdf).  In section 3.2 says 'do not install MDW and the mobile client on the same platform.'  Did mean really say 'platform' or does really do not install the MDW and the mobile client on the same device?  We are a store of Windows 100% - the mobile server is installed on a Windows Server machine, we plan to develop with Workbench Mobile database (GMD) on a Windows 7 desktop PC, and we intend to run the client mobile Windows 7 tablets. The Release Notes say that I can't do this?

  Yes - the way it is written is a bit confusing.    We will correct it in the next version of doc.    What we were trying to say, is do not install them on the same system.    Thank you for this comment.

  Kind regards

  Mike

• find the number of map software iscsi vmhba

  Hi, im trying to write scripts for automation but I find on different server models the software iscsi adapter varies from vmhba32 to vmhba39

  Is it possible that I can find that number using powercli so I can put it as a variable to be used for another command later in the script?

  Thank you

  Forget the bug with iscsi.

  It's the derivation

  $esxName = 
  (Get-VmHost $esxName).StorageInfo.ExtensionData.StorageDeviceInfo.HostBusAdapter | where {$_.Model -like "iSCSI Software Adapter" -and $_.Status -notlike "unbound"} | Select Device
  

  ____________

  Blog: LucD notes

  Twitter: lucd22

• VPN3000 and the Microsoft Client

  Hello

  I have a VPN3015, and most of my RAS users must use Microsoft PPTP client.

  I need to divide users into groups and therefore assign each group a different IP pool.

  Because there is no way to get into the 'group' in the Microsoft client, how is that possible?

  Someone at - it an example of configuration? I searched cisco.com and can not find something suitable.

  Kind regards

  Marcus

  PS please don't respond to the email in my username, I don't work there anymore.

  It depends on how you made your user authentication. If it's local, to that user names are configured on the VPN3000 himself, then assign users to a specific group on the general tab in the configuration of the user. Then under this group define a single group IP address pool, users need to pick that up.

  If you make the Radius Authentication for your users, you must configure the Radius Server to return the name of the group. So in the profile of each user Department sets the class attribute (attribute 25) to be returned, in the form of:

  UO =;

  It hangs this user in this group on the hub. again, you must define a single IP addresses pool on this VPN3000 group and they must pick up the pool like that. See http://www.cisco.com/en/US/tech/tk59/technologies_configuration_example09186a00800946a2.shtml for more details.

  If you make another form of authentication (NT domain, etc.), then you are out of luck, because there is no way to associate users with a particular group of VPN3000.

• software for Toshiba DVD and the Windows Version 7000 series

  I found a file that contains the information that I need help.

  In c:\I386\Comdata\Toshdvd
  The software for Toshiba 7000 series DVD player is not compatible with ths version of Microsoft Windows and will be disabled during the upgrade. You must uninstall the software for a more complete solution

  I don't know if this is the problem with my DVD/CD drive. The light comes on and it runs for a while when she has a DVD inside, but is not listed by the DEVICE MANAGER. I use Windows XP

  Could someone help please?

  Just in case anyone else experiencing similar problems, in that I found some information

  http://209.167.114.38/support/TechSupport/TSBs/all/-TSB000917.htm

• I need to reinstal the HP Solution Center software on my PC and the office.

  I am running Windows Vista for a HP Phtosmart Premium All in One C309a. I deleted the application before a reinstall but this app (used to operate the printer) did not return. Everything works fine now, but I can't give orders to my printer/scanner. Impossible to find online a link to support or reinstall an attempt to update driver software. Can someone direct me to a link for the download?

  Hello cyberjack101

  What was your final decision?

  The reason why I suggested the link was that HP Solution Center should be in the full driver package.

  Always happy to hear that your printer is in working condition.

• Problem launching software adobe digital editions and the administrator password

  I'm trying to download adobe digital editions to my pc, so I can transfer books to read on my iPad 2.  However, when I click on "launch", appears a message "run as" and this must be done by "Administrator".  The problem is, it won't take my password.  The password works every time I log in.  Why not do it now?  Thank you.

  Do you have any other user accounts on the computer? If so, is there another account with higher privileges to user you can log in and check if your account privileges is set to administrator or limited user level?

  I would like to uninstall the software and reinstall.

  Navigate to the configuration file, right-click, and click Run as administrator.

• BlackBerry 10 new software has been removed and the phone on Z-10 options

  I can't unlock my phone # now, I'll call option and 'show my number' disappeared! Any ideas? I didn't set a restore point wen I DL new updated or the other

  Fixed my problem by phone re-booting. I have in fact shud start!

• Context menu "send link...". "does not launch the mail client

  It worked in Firefox 12, but with the last update for Firefox 13.x no mail client is started (mine is Thunderbird) what contextual menu item "send link...". "is clicked.

  I tried this with all the addons disabled but the same problem occurs.

  Does for you? If this is not the case, how can I solve it?

  I reported a bug if others have this problem.

  Thank you.

  I changed the setting Network.protocol - handler.external.mailto about: config at the default value (true) and that seemed to fix it.

  I don't know what changed before if.

• What are the material and the vSphere license requirements?

  I searched the net and I can't get a clear answer...

  Should I x 64 hardware to run vSphere?

  My ESX3 low-income countries work on vSphere?

  Thank you

  II

  Yes, you need 64-bit hardware to run ESX 4.0-

  You cannot use the licrnses directly, but if you have Service and active support on your ESX3 licenses your will can update the license ESX 4 licenses.

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• How to correctly record the ESXi 4.0 and vSphere Client for free?

  Hello everyone.

  Can someone help me with registration

  of free VMware ESXi 4.0? I am totally confused with the process I

  certainly do not understand.

  My goal is to install and use ESXi

  4.0 and manage via vSphere client with free licenses free of charge for

  more than 60 dayes. Is it possible?

  Installation of its products

  gone without problems, but failed to save. I found a few

  suggestion on other threads, but nothing helped. Give me a hand please,

  I will be grateful.

  I'll write what I did:

  1. I went to the http://www.vmware.com/products/esxi/ site.

  2. I read that I can get the free license for VMware ESXi 4 and VMware vSphere Client.

  3. Decided to download this software, registered and was redirected to
     the site where I could download iso 4 ESXi and vSphere Client .exe

  4. Installation and basic configuration of ESXi on the bare metal and vSphere Client Windows XP without problems.

  5. I am able to create virtual machines and use it - it's OK, but vSphere Client know that I have to the 60-day trial.

  6. Meanwhile I received the email with "Activate your VMware ESXi license".

  7. I have
     Click on the link in the e-mail and was redirected to the same
     the site, where I can download the software, but on the top of the web page I can
     find information and a 'ESXI licenses""this license key is valid.
     "for VMware ESXi 3.5 Update 2 and later versions. So I guess it's also valid
     for ESXI 4.0. I'm I right?

  8. I would like to record my ESXi 4 software installed and the vSphere Client. Of
     I chose the vSphere Client Menu: help - & gt; VMware on the web - & gt;
     Sign up for now. The site ask me "series/license number Activation".
     Code"so I typed the license key. Iassume that this license key should not be placed here, because the web site of replay that: "Code of Activation of series/license number has already been registered. So how do?

  As I wrote, I'm confused. How to correctly record the ESXi 4.0 and vSphere Client? What I did wrong and how to fix?

  To register the serial number in your ESX4i host

  Home-> inventory-> higher level (your ESXi host)

  Tab Configuration

  Left side - features licensed

  Edit-> Assign new key for this host-> Enter Key

  Paste your key

  Confirm all

  Your ESXi server is now fully licensed

  Note: you no longer have the basic features and all the enterprise features that came with a trial license are no longer valid

  Maish

  Architect of virtualization & Systems Administrator

  http://technodrone.blogspot.com

• Financial performance overview and the Plugins do not work

  Dear all,

  as mentioned in the subject: I can't open the tabs overview of performance in the vSphere client and the vSphere Client cannot download the plug-ins (for example the vCenter Service status plug). After you wish for some time I can not find something wrong in my setup. Seems the cause seems to be that the tomcat is listening on port 8443. What could be the reason for this?

  C:\users\administrator > netstat - ano | Findstr.8005

  TCP 127.0.0.1:8005 0.0.0.0:0 ABHOREN 101160

  C:\users\administrator > netstat - ano | Findstr.8009

  C:\users\administrator > netstat - ano | Findstr.8080

  TCP 127.0.0.1:8080 0.0.0.0:0 ABHOREN 101160

  C:\users\administrator > netstat - ano | Findstr.8443

  TCP 0.0.0.0:18443 0.0.0.0:0 ABHOREN 4

  TCP [:]: 18443 [:]: 0 ABHOREN 4

  The process behind 18443 port does not work, because it returns a 404 for each URL on this port.

  I will attach my conf of tomcat server.xml file. I'm under vSphere 4.1.0 on a Windows 2008 R2 server.

  Thank you in advance!

  Hello Oliver,.

  Yes it is possible, but I would recreate the .pfx using the same certificate and private key created the previous PFX file:

  OpenSSL.exe pkcs12-export - in rui.crt - inkey rui.key - name of rui - passout pass: testpassword-out rui.pfx

• ESXI and vSphere Client

  Hello

  In my box a summer ESXI Server Installer a long time ago. En now it is 4.0 and the vSphere client for access 4.0 also but its evaluation period is complete.

  What do you recommend me to do?

  Did you well requested a license pour ESXi 4?

  http://www.VMware.com/go/get-ESXi-4

  Eric

• iSCSI/NIC bonding/Multi Pathing

  My entire ESX environment consists of all Dell PE2950s, each with 2 x 1 GB NIC in them.

  both my iSCSI servers have 2 x 1 GB ethernet which are NIC glued to maximize throughput.

  For most areas of development, so these are his especially iSCSI and vm vm traffic traffic (like IIS, SQL, etc.)

  What is the best way to config the vNetwork in ESX so that I can use two NICs for ISCSI, but not to lose the LAN feature?  Can I spend 1 iSCSI NETWORK card and the other card NETWORK ISCSI/LAN?

  I posted about this before and I was told that the collage of NIC is not supported for iSCSI in ESX.  I don't know anything about multiple paths...

  Take a look at these:

  http://goingvirtual.WordPress.com/2009/07/17/vSphere-4-0-with-software-iSCSI-and-2-paths/

  http://blogs.VMware.com/KBTV/2011/01/how-to-configure-iSCSI-port-binding-on-vSphere-4.html