Similar Questions

• I have microsoft net framework 2.0 service pack 2... and msnf 3.0 sp2... and msnf 3.5 sp1... and the microsoft compression client pack 1.0 for windows... should I all of this on my computer?

  I have microsoft net framework SP2 2.o... and sp2... msnf3.0 and msnf3.5 sp 1... and the microsoft compression client pack 1.0 for windows... should I all of this on my computer?

  See:

  What is the .NET Framework, and I need all these versions?
  http://ask-Leo.com/what_is_the_net_framework_and_do_i_need_all_these_versions.html

• My Windows telling me that he needs 11 updates. These updates consistently fail and the Microsoft fix did not work. Error codes are 641 and 80070641

  My Windows telling me that he needs 11 updates.  These consistenly updates fail and the Microsoft fix did not work.  Error codes are 641 and 80070641.

  Hello

  Did you change your computer before this problem?

  You can follow the suggestions and check out them.

  Method 1

  You can follow the procedure in the article.

  How to resolve problems connecting to Windows Update or Microsoft Update

  http://support.Microsoft.com/kb/818018

  Method 2

  You can reset the Windows Update components.

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.
  Back up the registry
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Method 3

  You can download and run the system update readiness tool.

  Description of the update tool of the system to Windows Vista, Windows Server 2008, Windows Server 2008 R2
  http://support.Microsoft.com/kb/947821

  Method 4

  Step 1:

  Place the computer in a clean boot state.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a troubleshooting follow step 7: reset the computer to start as usual

  Step 2:

  You can manually download and install updates from Microsoft Download Center.

  Microsoft Download Center

  http://www.Microsoft.com/downloads/en/default.aspx

  Method 5

  You can disable temporary of your security software.

  Disable the antivirus software

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks

  See also:

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

• Install the MDW and the mobile client on the same platform

  Hi all

  We implement our 11g Oracle Database Server from Mobile environment and I was confused about something I read in the Release Notes (http://docs.oracle.com/cd/E22663_01/doc.11100/e22675.pdf).  In section 3.2 says 'do not install MDW and the mobile client on the same platform.'  Did mean really say 'platform' or does really do not install the MDW and the mobile client on the same device?  We are a store of Windows 100% - the mobile server is installed on a Windows Server machine, we plan to develop with Workbench Mobile database (GMD) on a Windows 7 desktop PC, and we intend to run the client mobile Windows 7 tablets. The Release Notes say that I can't do this?

  Yes - the way it is written is a bit confusing.    We will correct it in the next version of doc.    What we were trying to say, is do not install them on the same system.    Thank you for this comment.

  Kind regards

  Mike

• Customers and the Microsoft exchange 2003 Server

  I have a Microsoft exchange Server 2003 with 5 clients. whenever I join a new computer to the domain the n the new computer will see existing mapping all drives but cannot see the field and the other computers but other computers can see the new computer in the network. What can I do to be able to see my new client station network? Firewall window is also off. Thank you.

  I suggest that ask you in one of these Microsoft forums:

  Forums of previous Versions of Exchange .

  Thank you.

• Link to maps software iSCSI NIC vmkernal and the vsphere client

  Hello

  IM playing with our VMware 4.1 hosts a Dell Equallogic PS4000E, connection

  So far, I have:

  Created ports VMkernal

  Apply adapters

  The iSCSI initiator enabled

  But apparently, I need to run the following command to bind the ports of iscsi software adapter:

  Add an esxcli swisscsi nic - n vmk # vmhba d #.

  Is anyway in the Vsphere Client?

  Hello.

  Unfortunately, there is no way to do it from the vSphere client.

  Good luck!

• Windows Update page does not load, another updater with "update" in the url does not work, and the microsoft Download Center will not download. Help!

  Right. I read the other posts and do not know if it's the same or not, but...

  Update Windows page fails to load - no error message
  antivirus and another updater with update in the URL cannot purely and simply, or don't load - no error message
  any attempt to download anything from microsoft download site fails to load - no error message

  I got stardock, not my colors, uninstalled

  same result.

  any ideas?

  CLM-NSWG4,
  It seems to me that you can have to deal with a virus\malware infection.  You can watch these threads discuss virus problems and see if you are able to detect problems, that I suggest you use an online scanner (if you are able to) and scan your system.

  Windows Live OneCare Safety Scanner Windows 7\Vista

  Windows Live OneCare Safety Scanner Windows XP

  Get rid of malware

  Can I clean an already infected computer?

  If you need more help then read: what to post in the Windows Update forum
  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Try to update the hardware Microsoft 3000 wireless mobile mouse and the microsoft drivers.

  Hi, I'm trying to update hardware drivers and microsoft drivers, and he asks the operating system;

  I am running windows xp. SP3. 32. ILO, but it offers only 64-bit windows, what can I do?

  Hi peterforsythe,

  It seems that this mouse is only supported by Windows XP 64-bit. Unfortunately, it seems that you need to buy a mouse which is supported by 32-bit.

• My hotmail account is blocked and the microsoft unlock code never happens

  My hotmail address * address email is removed from the privacy * has been blocked because it was hacked. I am told that a code of re - open this account will be sent to my email address * address email is removed from the privacy * but it never happens. Can you help me to open this account again please?

  Hello

  Answers is a peer group supported and unfortunately has no real influence on Hotmail.

  HotMail has its own Forums, so you can ask your questions there.

  Windows Live Solution Center - HotMail - HotMail Forums Solutions
  http://windowslivehelp.com/

  Hotmail - Forums
  http://windowslivehelp.com/forums.aspx?ProductID=1

  Hotmail - Solutions
  http://windowslivehelp.com/solutions.aspx?ProductID=1

  How to contact Windows Live Hotmail Support
  http://email.about.com/od/hotmailtips/Qt/et_hotmail_supp.htm

  Windows Live Hotmail Top issues and Support information
  http://support.Microsoft.com/kb/316659/en-us

  Compromised account - access unauthorized account - how to recover your account
  http://windowslivehelp.com/solution.aspx?SolutionID=6ea0c7b3-1473-4176-b03f-145b951dcb41

  Hotmail hacked? Take these steps
  http://blogs.msdn.com/b/securitytipstalk/archive/2010/07/07/Hotmail-hacked-take-these-steps.aspx

  I hope this helps.

• Widows updates did not work since Juen 25 April 2012 and the Microsoft FixIt fails with the error 0 x 80040154.

  Fix Microsoft it does not work.

  Windows Update has not worked since June 25, 2012. I used the antivirus scan malware and Microsoft fix it. I get this error message

  "Year error occurred while troubleshooting.
  The Troubleshooting Wizard cannot continue
  "error 0 x 80040154."

  

  

  

  It's working now.

• The create a System Image will save the FPGA code and the RT code?

  I have some cRIO systems which were broadcast in our manufacturing plant for some time. A slight problem has been discovered in the programming and created a workaround solution, but a fix should be implemented. Currently, I have no way to test my new code without loading on the cRIO and it works on the tool while the product is running. If there is a problem and I need to do some debugging, the tool cannot be down for an extended period. I would write a vi that will save an image of the cRIO so I can reload the software that is currently running and prevent a situation of prolonged downtime.

  My question is, when I did in the past with a product that has different tests, calibration and the final client software RT, it seems that the code FPGA not be saved (not a big deal at the time since the new FPGA code was compatible with different deployments RT). The new FPGA code won't be compatible with the old RT software, so now I'm worried. I would like to just check on it until I have all the boss breathing down my neck. If the service will not save the bitfile FPGA, is there anything else I can do for the tool to return to the previous running state while I solved problems that may exist with the new code review? The original code was lost by my predecessor. Otherwise, I would use just that.

  Hi Jeremy,.

  You are right, because the create a System Image does not record the bitfile with the image of the RT. Using the configuration system API, you will need to deploy the RT image and then the bitfile FPGA compiled later. To ensure that you can return to the previous version of the software running on your RIOs, you could simply save the current image and bitfile before deploying the new image and bitfile.

  However, the best way to proceed is to use replication Deployment Utility (RAD of OR). I have provided the link to the tutorial on the wheel, where you can download the utility. This exe will make images of the any of your RT targets and will also include the bitfiles with them. You can also deploy these images to several targets at once. In particular, you can read about the Bitfile (s) configure for FPGA Deployment Flash; the bitfile will be deployed at the start when stored in flash memory.

  Replication and deployment (RAD) utility-

  http://www.NI.com/example/30986/en/

• Why the excess USB traffic created by some models of the Microsoft Wireless Optical Desktop Receiver?

  As part of my work as a volunteer for a repairman to point not lucrative to registered of Microsoft, I test a selection of mouse and wireless keyboards that are given.  Based on the production of a software tool for USB port monitor, I noticed recently that some models of the Microsoft Wireless Desktop Receiver generate constant even when the keyboard and mouse are slowed traffic USB (about 10 transactions per second) or are completely absent.  This occurs with the 2.1 receiver Microsoft Wireless Optical Desktop (model 1028) and the Microsoft Wireless Desktop receiver 3.1 (also labeled model 1028).  It does not occur with the Microsoft Wireless Optical Desktop Receiver 1. 0a, nor have I watched Microsoft controls only receivers or receivers of Logitech mouse...

  This makes me curious.  What do these receptors with all this chatter?  I assume deliberately, because I see the same thing in all the units I checked.  If I was pretty savvy to decode the trace of the USB, I might be able to figure it out by myself, but I'm not.  I hope that there is someone on this forum who remembers how these old 27 Mhz receivers are designed and who can make me jump the learning curve by giving me an explanation of a layman to what happens here.

  Hello

  Thanks for posting your question on the Microsoft Forum. I understand that you are unable to connect to your hosted network.

  I suggest you to ask your question in the TechNet forums.

  https://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w8itpronetworking&filter=AllTypes&sort=lastpostdesc

  TechNet is watched by other computing professionals who would be more likely to help you.

  I hope this helps.

  Thank you.

• Combining three versions in a single backup file using the batch client/config file

  Hello again,

  Is there anyway to get three versions in a single backup file using a config file and the batch client, currently we have this Configuration file:

  [General]

  Operation = Multiple

  Username =

  Password =

  URL = net. TCP://localhost: 5210, Oracle, Drm, ProcessManager

  LogFileName=D:\DRM\VIPTBAU\LOG_FILES\logfile.log

  [Activities]

  OperationCount = 3

  Operation1 = VIP_DIMENSIONS

  Operation2 = ACCOUNT_RF

  Existence3 = ACCOUNT_BS

  [VIP_DIMENSIONS]

  Operation = Backupversiontofile

  Connection = MONTH_END_BACKUP

  VersionAbbrev = TESTPROJ_VIP_DIMENSIONS

  filename = VIP_DIMENSIONS

  [ACCOUNT_RF]

  Operation = Backupversiontofile

  Connection = MONTH_END_BACKUP

  VersionAbbrev = TESTPROJ_RF_ACCOUNT

  filename = VIP_DIMENSIONS

  [ACCOUNT_BS]

  Operation = Backupversiontofile

  Connection = MONTH_END_BACKUP

  VersionAbbrev = TESTPROJ_BS_ACCOUNT

  filename = VIP_DIMENSIONS

  
  

  which generates three separate files. We tried using a single operation and listing the 3 times of the VersionAbbrev, but that didn't work and also list the 3 versions in a VersionAbbrev.

  If anyone has any ideas they would be greatly appreciated

  See you soon

  Chris

  Hi Chris Harris-Oracle

  DRM client batch supports export several versions of a single file and restore it back. You must specify the defined version name and the delimiter.

  You can configure the cfg below the backup file

  [General]

  Operation = Multiple

  Username =

  Password =

  URL = net. TCP://localhost: 5210, Oracle, Drm, ProcessManager

  LogFileName=D:\DRM\VIPTBAU\LOG_FILES\logfile.log

  [Activities]

  OperationCount = 1

  OP1 = VIP_DIMENSIONS

  [VIP_DIMENSIONS]

  Operation = Backupversiontofile

  Connection = MONTH_END_BACKUP

  VersionAbbrev = TESTPROJ_VIP_DIMENSIONS, TESTPROJ_RF_ACCOUNT, TESTPROJ_BS_ACCOUNT

  filename = VIP_DIMENSIONS

  Delimiter = comma

  to restore

  [VIP_DIMENSIONS]

  Operation = RestoreVersionFromFile

  Connection = MONTH_END_BACKUP

  SourceVersionAbbrev = TESTPROJ_VIP_DIMENSIONS, TESTPROJ_RF_ACCOUNT, TESTPROJ_BS_ACCOUNT

  TargetVersionAbbrev = TESTPROJ_VIP_DIMENSIONS, TESTPROJ_RF_ACCOUNT, TESTPROJ_BS_ACCOUNT

  filename = VIP_DIMENSIONS

  Delimiter = comma

  Try it tested and it works very well

• Financial performance overview and the Plugins do not work

  Dear all,

  as mentioned in the subject: I can't open the tabs overview of performance in the vSphere client and the vSphere Client cannot download the plug-ins (for example the vCenter Service status plug). After you wish for some time I can not find something wrong in my setup. Seems the cause seems to be that the tomcat is listening on port 8443. What could be the reason for this?

  C:\users\administrator > netstat - ano | Findstr.8005

  TCP 127.0.0.1:8005 0.0.0.0:0 ABHOREN 101160

  C:\users\administrator > netstat - ano | Findstr.8009

  C:\users\administrator > netstat - ano | Findstr.8080

  TCP 127.0.0.1:8080 0.0.0.0:0 ABHOREN 101160

  C:\users\administrator > netstat - ano | Findstr.8443

  TCP 0.0.0.0:18443 0.0.0.0:0 ABHOREN 4

  TCP [:]: 18443 [:]: 0 ABHOREN 4

  The process behind 18443 port does not work, because it returns a 404 for each URL on this port.

  I will attach my conf of tomcat server.xml file. I'm under vSphere 4.1.0 on a Windows 2008 R2 server.

  Thank you in advance!

  Hello Oliver,.

  Yes it is possible, but I would recreate the .pfx using the same certificate and private key created the previous PFX file:

  OpenSSL.exe pkcs12-export - in rui.crt - inkey rui.key - name of rui - passout pass: testpassword-out rui.pfx

• Cannot select the attribute client network Orchestrator

  I'm under Orchestrator 4.1.1 and the vCO Client 4.1.1 and I ran a problem. I need to set up a network for a workflow attribute (creating a virtual machine). When I select one of the virtual port with vCO client to use for the select attribute of the button is grayed out. Anyone else seen this? I have to do something special when you set an attribute of type VC:Network in the vCO client?

  Do you use a standard portgroup (VC:Network) or a distributed virtual Portgroup (VC:DistributedVirtualPortgroup). If dvPortgroup, then you may need to change your type...