Link to return to the parent of subspace's area

Similar Questions

• After I close my browser IE 9 and return to the office, my office programs are not available.

  After I close my browser IE 9 and return to the office, my office programs are not available. I have hover over a program and click, nothing happens for a few minutes... On the other hand, the taskbar and toolbar are all functioning normally. No other problems seem to be present.

  Thank you.

  Original title: freezing of funds

  Hello Manu,

  Thanks for the guidelines to help me solve my problem. Just to tell you that no, I have no error messages when I tried to access the office programs and Yes, I made a few changes in the pc... in the registry with Glary Utilities. That was my main concern.

  However, I tried the AUDITOR of FILE SYSTEM (CFS) and it fixed some problems.

  I also watched method 2 and did a performance using MICROSOFT FIX patch and ran that the Microsoft SECURITY SCANNER both have not reported any problems.

  Also tried method 1, no problem in safe MODE. I didn't think it was a third party program... so I decided to do a restore to an earlier date... then the problem seems to have disappeared.

  Start the pc also seems to be much faster.

  Thanks for the suggestions... I'll keep them as reference just in case...

• How can I return to the 'parent' source after following a link in the page source?

  After following a link in the page source, I would like to be able to return to the source 'parent '. The only option I found is the source is completely closed and open the source of the page once more. A 'return' option would be useful here...

  I just tried to look at the source of the page and the previous/next buttons on my mouse worked.

  If this isn't an option for you, another option is to view the Page Source to use an external application of your choice who has previous/next buttons the value. Dafizilla ViewSourceWith can be used to define an external application to view the source. You can also define an external application by changing hidden preferences 2, the following 2 links show what to change:

  • http://KB.mozillazine.org/View_source.Editor.external
  • http://KB.mozillazine.org/View_source.Editor.path

• Embeded SWF - & gt; return to the parent read head

  I am building a presentation that loads multiple external swf files into the main timeline. I know this is probably a very simple question, but at the end of the loaded swf file, I would like the main movie (parent) to go to the next keyframe labeled. I know that it would take some kind of action script in the last frame of the loaded swf file. I'm not sure what would be this script
  
  something like:
  
  gotoAndPlay (_root. ("' Samples ');?
  
  Thanks for the help
  

  cf_coletta wrote:
  > I'm building a presentation that is in charge of several external swf files in the
  > main scenario. I know it's probably something very simple, but in the end
  > swf file loaded, I want the main movie (parent) to switch to the other
  > labeled keyframe. I know that it would take some kind of action script in the
  > last image in the swf file loaded. I'm not sure what would be this script
  >
  > something like:
  >
  > gotoAndPlay (_root. ("' Samples ');?

  the foregoing not correct
  _root.gotoAndPlay ("Samples");

  But, if you load movies into levels that rather
  use _root _level0

  --
  Concerning

  Urami

  --

  Happy new year guys - all the best there is in the 2006 :)

  
  http://www.Flashfugitive.com
  

  
  http://www.Firefox.com
  

• Responsive HTML5 with mergedprojects, creates a hyperlink to a file in the project html parent to a child html file and it does not work! The child has with the parent TOC, but need to tie. Help, please!

  Hi group!

  I have a brilliant parent project that serves as a springboard for other projects. Users click a component of software they want and are redirected to a page with a list of all the documentation available for this component. Click on the name of a document and access - a lot of PDF files. BUT I also wish they were able to tie the online help for the component. After having read up on the link through / between projects, I knew that I needed to create a parent project (for the page intro and links brilliant) and projects for children (for software components).

  THEN

  I created a parent sensitive HTML5 project and the projects of two children. I compiled the parent to create mergedprojects files, and then open the projects children and collected to the appropriate mergedprojects folder. I then created a hyperlink to the file list html documentation in the project parent towards the child file software component html (output folder and start page [which is the same as the default theme]) and the link does not work! The child and its table of contents appears in the parent TOC so topics are here, but I can't link to them. If necessary, I can send screenshots.

  Where I am dorking this place?

  Thanks in advance for your time and help!

  Scottie 'needs help' gear

  What is your relationship like? And how did you create the link?

  A typical reactive merged help is structured as follows:

  index.htm (Master home page)

  mergedProjects

  childName

  index.htm (starting page for child)

  A child from the index.htm page link would look like this:... /... index.htm

  Kind regards

  Willam

• Bridge loses the cache folder tree window when I rename the parent folder

  I managed to Activate the changing the code name of the parent folder containing some images (I put underscore before the name of the parent folder).

  When I did it by hand, the folder and subfolders that I navigate were visible on the window of the folder (left side)

  But I lost the navigation of files in the window on the left when I do exactly the same code.
  

  (...)

  var newPath = decodeURI (Path.parent) + "/ __" + name;
  var bt = new BridgeTalk();
  BT. Target = "bridge."
  as access bridge contemporary 1. Colocacao do _ 2. Label 3. Organização back ficheiros por tipo
  BT. Body = "app.document.thumbnail = Folder('"+newPath+"').fsName;";
  BT. Send (8);
  BT. Pump();

  (...)

  ... and the left navigation desapears...

  Y at - he's hiding even lose the problem? If I can recreate the last window navigation file some how with the code?

  I can't believe, I found this, but it works and it's simple.

  At the same time, I spent 2 years using bridge in the wrong way and if I had a dev Adobe Bridge here, I wouldn't be very happy.

  Why Adobe cannot just give a straight and direct answers as in this case?

  When I rename an app.document.presentationPath, I usually returned his file parent on refresh() then first place it.

  Then, I would go back to the new folder renamed.

  Problem:

  "Content" Panel was OK and refreshed but the 'Files' Panel was not: the last folder is renamed not was still there and I still need to close her file parent panel 'Folder', click F5 and reopen making this ghost file to disappear.

  The solution is simple and logical, but unfortunately it took 2 years for me to solve.

  I only needed to start dealing with the chain of node that contains a full bridge (uniform resource identifier) URI.

  For example:

  var origin = Folder (app.document.presentationPath);

  var renamedFolderName is "v_" + folder (app.document.presentationPath) .name;.

  App.document.Thumbnail = new thumbnail (New Folder (app.document.presentationPath) .parent); return to the parent folder

  //

  Record (origin) .rename (renamedFolderName); change of name

  App.document.thumbnail.Refresh (); update the parent folder

  App.document.Thumbnail = new thumbnail (new thumbnail (folder (folder (origin) .parent + "/" + renamedFolderName) .fsName) .uri); the uri is the node (URI of full-bridge)

  And... the 'Files' Panel has been updated correctly, and the ghost file missing!

• How to return to the thunderbird start page

  When I work in thunderbird sometimes with I to return to the start page. for example, I write a msg and want to return to the start page. What are the steps of keyboard to do from another part of the program?

  CTRL + 1, will bring you to Mail & Newsgroups Home Tab

• How to return to the view card when an application is in full screen mode without using the Launcher button

  Is it possible to return to the map view when you are using the full screen and more it Launcher button? This will bring this button quick exit!

  Hello and thank you for using the HP webOS Help Forums!

  The Center button is not required to enter the map view. In any position (landscape or portrait) you can slide your finger from the bottom to the top of the page, but just make sure that you start in the black area around the screen. It is a subtle and quick movement and may require some getting used to.

  I hope this helps

• How to perform account on a Table hierarchical Oracle based on the Parent link

  Hello

  
  

  I have the following to Oracle 11 g R2 hierarchical table definition:

  
  

  Table Name: TECH_VALUES:
    ID,
    GROUP_ID,
    LINK_ID
    PARENT_GROUP_ID,
    TECH_TYPE

  Above the hierarchical table definition, some examples of data might look like this:

  
  

  ID      GROUP_ID      LINK_ID      PARENT_GROUP_ID      TECH_TYPE 
------- ------------- ------------ -------------------- --------------
1       100           LETTER_A     0
2       200           LETTER_B     0
3       300           LETTER_C     0
4       400           LETTER_A1    100                  A 
5       500           LETTER_A2    100                  A 
6       600           LETTER_A3    100                  A 
7       700           LETTER_AA1   400                  B 
8       800           LETTER_AAA1  700                  C 
9       900           LETTER_B2    200                  B 
10      1000          LETTER_BB5   900                  B 
12      1200          LETTER_CC1   300                  C
13      1300          LETTER_CC2   300                  C
14      1400          LETTER_CC3   300                  A
15      1500          LETTER_CCC5  1400                 A
16      1600          LETTER_CCC6  1500                 C
17      1700          LETTER_BBB8  900                  B
18      1800          LETTER_B     0
19      1900          LETTER_B2    1800                 B 
20      2000          LETTER_BB5   1900                 B 
21      2100          LETTER_BBB8  1900                 B

  
  

  Keeping in mind that there are only three Types of technology, i.e. A, B and C, but could not span on different LINK_IDs , how can I do a count on these three different TECH_TYPEs based solely on the ID of parent link where the parent group id is 0 and there are children below them?

  NOTE: It is also possible to have parents in dual link ID such as LETTER_B and all values of children but different group ID.

  I'm basically after a table/report query that looks like this:

  Link ID        Tech Type A         Tech Type B          Tech Type C
-------------- ------------------- -------------------- -------------------
LETTER_A       3                   1                    1
LETTER_B       0                   3                    0
LETTER_C       2                   0                    3
LETTER_B       0                   3                    0

  Be hierarchical and my table can consist more of 30 000 files, I must also ensure that performance to produce the report above shown here query is fast.

  Obviously, in order to produce the report above, I need to gather all necessary County outages based on TECH_TYPE for all parents of the link id where the PARENT_GROUP_ID = 0 and store it in a table according to the guidelines of this report layout.

  Hope someone can help with maybe a combined query that performs the counties as well as stores the information in a new table called LINK_COUNTS, which will be based on this report. Columns of this table will be:

  ID, 
  LINK_ID, 
  TECH_TYPE_A, 
  TECH_TYPE_B, 
  TECH_TYPE_C
  

  At the end of this entire requirement, I want to be able to update the LINK_COUNTS table based on the results returned by the sample data above in a SQL UPDATE transaction as the link ID parent top-level already exists within my table LINK_COUNTS, just need to provide values for breaking County for each parent node link , i.e.

  LETTER_A 
  LETTER_B 
  LETTER_C 
  LETTER_B
  

  using something like:

  UPDATE link_counts 
  SET (TECH_TYPE_A,TECH_TYPE_B,TECH_TYPE_C) = 
     (with xyz  where link_id = LINK_COUNTS.link_id .... etc
  

  Which must match exactly the above table/report

  Thank you.

  Tony.
  
  

  Hi, John,.

  Thanks for posting the sample data.

  John Spencer wrote:

  ...  If you need to hide the ID column, then you could simply encapsulate another external query around me. ...

  Or simply not display the id column:

  Select link_id, -id,

  Count (case when tech_type = 'A' end then 1) tech_a.

  Count (case when tech_type = 'B' then 1 end) tech_b,.

  Count (case when tech_type = "C" then 1 end) tech_c

  of (connect_by_root select link_id link_id,)

  the connect_by_root ID, tech_type

  of sample_data

  Start with parent_group_id = 0

  connect prior group_id = parent_group_id)

  Link_id group, id

  order by link_id, id;

  Same results, using SELECT... PIVOT

  WITH got_roots AS

  (

  SELECT CONNECT_BY_ROOT link_id AS link_id

  Id CONNECT_BY_ROOT ID

  tech_type

  OF sample_data

  START WITH parent_group_id = 0

  CONNECT BY PRIOR group_id = parent_group_id

  )

  SELECT link_id, tech_a, tech_b, tech_c

  OF got_roots

  PIVOT (COUNT (*)

  FOR tech_type IN ('A' AS tech_a

  'B' AS tech_b

  'C' AS tech_c

  )

  )

  Id ORDER BY link_id

  ;

• When I return from the page of google search for a link then button does not return return

  When I return from the page of google search for a link, then button does not return back. Instead, the same page refills. I need to go back click back button twice or even more. How to fix? I cheked it it another browser and there is no such behavior. It seems completele Firefox problem.

  the problem was resolved after remooving extenshion «user agent overrider»

• Private data LVOOP Parent returned when the child instance created from constant

  I created a parent class and child class.  For each of these classes, I created a member who is a builder, whose purpose is to initialize constants for each class and return the instance of the class VI.  I also have an accessor Member VI for each class that returns private data of the class (in this case, a single string for each class).

  Private class data Parent 'String' is set to "text Parent" as default.

  Private data of the class of the child 'Child String' are set to 'Child text' as a default.

  The Parent class constructor works very well.  For testing purposes, I'll be back the text of unbundling of directly the manufacturer VI, as a return of the VI accessor. The Parent constructor starts from a class constant.

  However, in the case the constructor of class as a child, if I start from a class constant, unbundling directly private data (using a feature of unbundling by name and choosing "Child String" as the element), I get the private parent data!

  If I use the Member of the class of the child VI to retrieve the text, I get the private data of the child.

  If I change the constructor from a class of control instead of a constant class, I get the private data of the child.

  This occurs only until the child class has existed as a control flag. that is, if I ungroup private data, after the class is returned by any Member VI, I get the private good child data.  Then, of course, something changes once the class 'data' has been a control at a given time.

  I'm using Labview 8.6.1, Windows XP

  I have attached a small project that demonstrates the problem that I encounter, without actually doing initialization, just read.

  Is this expected behavior?  Why does it matter if I start with a constant of class instead of a control of the class?  When you slide the block diagram in the project window, you will always have a constant.

  Although I was able to reproduce your problem in LabVIEW 8.6.1, it seems to work fine in 2009.  I could not find a CAR ID, but at this point I can only assume that the behavior was not intended but it is set in 2009.

  Let me know if you need me to find more details.

• How to open or return to the Panel tabs 2,3,4,5,6, etc. using a URL link.

  Hi all

  I have some problems with Spry Panel tabs. I use Dreamweaver CS6 and tried the code, as seen on this link URLUtils Spry help to open remote tabs and panels , but it did not help.

  My Tabs panel contains up to 6 tabs and maybe more that I do. I need help on how to return to the tab, I was after filling and display a form which is this tab?

  For example, I have form questionnaire on tab 3. How can I return to the same tab 3 after filing my form of questionnaire.

  Note here that when I click the button submit, the contents of the form are validated in the database, and the form will be redirected to the URL link that is attached to the submit button. This ULR link must have something comme.../interview.php?tab=3 or so it will load tab 3 once the page is updated after the presentation

  

  Also note that my site is still currently offline. It has not been added to internet as I'm just starting my project.

  Thank you very much

  Thank God I was able to identify the problem. The lnks tab are busy

  Here's what I did

  1. I created the tab 3, using the example, as seen on this link using Spry URLUtils to open the panels and remote tabs which I said was not helpful. In any case, I'm sorry for that. Please forgive me for my mistake.

  2 filled with content and adding a link tab = 2 #TabbedPanels1 what makes 3 tabs. See the image below

  

  My 2 tab is the tab text for more details .

  3. light that it worked, I replaced now the SpryAssets folder of the project that I worked on the SpryAssets folder I downloaded from the link using Spry URLUtils to open the panels and remote tabs and that's all.

  My conclusion here is that the SpryTabbedPanels.js that is automatically inserted in the SpryAssets folder of Dreamweaver has a fault code when it comes to adding links.

  So I give credit to the Powers of David which I believe is the author of the above code that solved this issue

• help closing a pop-up (open with Skillbuilder popup) AND passing a return value to the parent window

  I use apex 4.2 as well as the pop-up skillbuilder.   The parent (p110) window opens a child using skillbuilders 2.0 popup.  The pop-up (p114) transmits a report worth (#VESSEL_ID #) after confirmation by the user.

  For some reason any and I'm sure it's a simple syntax that I am not contagious, when the user selects the #VESSEL_ID #, the appropriate confirmation message will appear, but the window close or change the value.

  The field #VESSE_ID # a a link URL:

  JavaScript: closeMe (pVessel, psupplierVesselId);

  who calls the closeME function:

  < script language = "JavaScript" >

  function closeMe (pVessel, psupplierVesselId)

  {

  Alert (psupplierVesselId);

  If (psupplierVesselId! == "999999" |) (psupplierVesselId == "999999" & & confirmer ("rappel pour concessionnaires fédéral: quelle déclaration dele de rivage ne sélectionnez pas navire INCONNU")))

  {

  Window.parent. $(Window.parent.document) .apex_model_page ('close', pVessel);

  }

  {

  < /script >

  any help is appreciated!  Thank you

  Karen

  In the 3rd category sister Teresa gave me a D - in penmanship and spelling.

  so, basically, I misspelled model.    It should be modAl.

  Ugh.  Thank you!

• I want a drop down menu where the parent element is not a link

  I have a drop down menu which is filled with links to pages that are related to a parent page. But I don't want the parent links.  People are confused (they tell me) if him hover over the title from the drop-down list that the parent is a link to a page as well. Is it possible to remove the link at a higher level? See www.danielvandekamp.com/retraite where I want to 'Een retirement doen' does not establish links. Any advise?

  Go to the page in the view plan, make a right click on it, look at the controls and feel liberated!

• What Linked Clone VM after having deleted the Parent model?

  Hi all

  I deleted the models and all VM related clones still works fine

  Looks like that model files still sitting on the data store.

  It will be really difficult for me to keep track of which is where?

  It will be really useful if we could come up with a report or something to achieve exact file structures

  Thank you

  As long as a VMDK is necessary for all child VM still in Lab Manager (or a child of this VM) it will stay on the drive in its original folder.  You can eliminate some of the records/VMDK by consolidating the configurations that have been cloned from a template.  We do it with most of the configurations captured at the library.  You must be careful if or it will cost you a lot of space if

  In Lab Manager you can see this in a graphical representation on the way to resources, Datatstores and then choose the data store for configuration model / you want to watch.  The mouse on the virtual machine, and then select the context.  Not only that you get a graphical view, but when you hover over each box it tells you the name of the folder and the size of it.  He also tells

  I've been searching in the database to figure out how I can get this information and export it.  I'm only able to track down the parent folder for a current VM inside Lab Manager so far and not the parent of one that no longer exists (but always as a linked clone).