Link WRT610N and storage

Similar Questions

• WRT610N and compatible usb drives

  Hello

  Has someone managed to get a stable connection to the external hard drive USB on the WRT610N?

  I would use a hard drive enclosure that turns down the drive with a sleep mode for reasons of noise and energy.

  With the latest firmware (1.00.02 B10) I tried:

  Vantech Nexstar 3i with a Seagate 1 TB - works very well until the player will power mode how the router to start up export drive even if the USB is on and the management page shows the drive always connected

  Western Digital My Book essential 1 TB - the router is not even mount the external hard drive.  I tried everything... FAT32, NTFS... waited, plugged the USB in and out, power cycled the router...

  Any help would be appreciated, because I spent countless hours trying to get something to work.

  OK, I finally have a system of USB storage to work with a hard drive that goes to sleep.

  Looks like there's a previous WRT610N that does not have a version 1 on the stamp on the underside of the router.  This router did not work well with my hard drives.  I'm a worm 1 WRT610N and use mounts (1.00.00 B18) F/W, The Western Digital My Book essential 1 TB factory delivered and everything works fine.  On the USB data rates are approximately 2.4 MB/s via wireless with security AES .n and 5 MB/s via ethernet cable.  Funny is that more recent (1.00.02 B10) firmware will not mount drive Western Digital My Book.  Interesting that in the version notes it says «enhanced recognition of USB external hard drives»  Well, at least I'm happy with something that works; 4 weeks and many hours.  Unfortunately, Linksys does no more than F/W on their website, so I'll never upgrade in case I lose the ability to connect to my new hard drive.

• Bought Office Acrobat 11 DC Pro to my PC running Windows 7 - I have more than enough RAM and storage, but get the message: "this application cannot be installed on this operating system. The installation program will end now. Please refer to the minimum s

  Bought Office Acrobat 11 DC Pro to my PC running Windows 7 - I have more than enough RAM and storage, but get the message: "this application cannot be installed on this operating system. The installation program will end now. Please refer to the minimum requirements to... "Can't determine the location on the Adobe Web site to get answers. Any suggestions?

  I deleted an earlier version of Acrobat Pro from my computer. Still, I get the same message.

  Hi John,.

  Please specify if you have purchased DC Acrobat or Acrobat 11 or upgrade you to the latest patch for Acrobat 11, that is to say 11.0.11 so that we can help you accordingly.

  I wonder if you have checked your system requirements before you download Acrobat.

  I would also ask to share with you the screenshot of the error message with us.

  You could probably uninstall Acrobat using cleaning tool. Here is the link for the same thing.

  http://labs.Adobe.com/downloads/acrobatcleaner.html

  If you were installing DC, check out the following link to download.

  https://helpx.Adobe.com/Acrobat/KB/Acrobat-downloads.html (classic)

  https://helpx.Adobe.com/Acrobat/KB/Acrobat-DC-downloads.html (continued)

  Concerning

  Sukrit diallo

• Problem with Workstation 9, Windows 8 and storage spaces

  Hello

  I have currently a strange problem with VMWare Workstation 9 running on Windows 8, when my VMs are hosted on a configuration of storage like a mirror. My Windows VMs work very well, but all my virtual machines to Linux seem to get corrupted after a cycle start and stop a success. When I try to restart, they bomb on me on what seems to be the alteration of the disc. I have attached a filed faulty start of RHEL 6 x 64 for reference.

  Any ideas what may be the cause? In my view, it can be linked to as storage spaces when to take a clean copy of the virtual machine (before it was corrupted) on move on a disk that uses no storage spaces everything works fine.

  What puzzles me is why not Linux virtual machines VMs Windows affect go bad after the start cycle...

  Any help on this would be greatly appreciated,

  François.

  If workstation uses the storage as swap space?

  Try changing the setting to "use only RAM ' or something like that in the settings of the workstation.

  Linjo

• Hosts and storage of VDC.

  Hello.

  I'm trying the vCloud API v1.0 for details of a VCC of the vCloud Director. But I am struggling to find a way to bind the VCC with the host (physical machine) and storage it is associated. Can you get it someone please let me know if you know a way to find the host and the storage associated with a VCC?

  Thank you!

  Hello

  To get the relationship using vCloud API 1.0

  1. api/v1.0/admin/extension/providervdc/id - contains info on the hosts, data warehouses. the provider VDC also contains a link to get the references of vdc.

  2. api/v1.0/admin/providervdc/id/vdcReferences - that gives all the VCC references supported by this provider vdc.

  I hope this helps.

  With the help of vCloud API 1.5, query service contains all this information.

  Kind regards

  Rajesh Kamal.

• Creation of names of users and storage space began with the numbers or _ $#.

  Hi all
  
  Could you please explain to me
  
  If the creation of users and storage names began with numbers or _ $# is fine. Are there any constraints or slandered oracle. ?
  
  
  Thanks in advance.
  Dev

  After watching a few google links, I want to sum-up rule for the design of Tablespace:

  1. always create tablespace locally managed (management of the measure).

  2. never create tablespace with hundreds of small data files to avoid a slower recovery.

  3. the types of segments that are used in the same way must be stored together.

  4. the system must be designed for the most common usage.

  5. the regions should be exceptions.

  6 feud among storage space should be kept to a minimum.

  7. the data dictionary must be isolated.

  8. always give a name to the tablespace; so it may be easy to know what contains this tablespace.

  9 http://webhelp.esri.com/arcgisdesktop/9.2/index.cfm?TopicName=Recommendations_to_minimize_disk_I/O_contention&anchor=iooracle

  10. never use quotation marks double tablespace name.

  11 create the tablespaces explicitly using CREATE TABLESPACE rather than implicitly by creating a table without specifying a tablespace name.

  12. create an a tablespace less as temporary for user types.

  13 specify the suffix ".dbf" for names of applications datafile, '.log' for log data file names.

  14. set the default storage parameters to take into account the size of the typical object.

  15 specify PCTINCREASE 0. Exceptions can only be made with the approval of the Central s/n.

  16 AUTOEXTEND must be enabled.

  17 MAXSIZE must be set.

  After posting the links to doc, I want to sum-up rule for the creation of the user:

  1. always follow "Requirements Minimum for passwords"
  http://docs.Oracle.com/CD/B28359_01/network.111/B28531/authentication.htm#CHDFDHAJ

  2. never use double quotes with username and passwords.

  3 assign a default Tablespace for the user.

  4 assign a Tablespace Quota for the user.

  5 avoid giving the ability for users to create objects in a table space, because the schema is the logical database for the user.

  6 enable auditing for many reasons.

  7 assign a temporary Tablespace for the user.

  8 identify the appropriate profile and role to the user.

  9. only letters, numbers and the underscore character are allowed in names. Although Oracle allows for $ and the #, they are not needed and may cause unexpected problems.

  10. all names are uppercase. Or at least unimportant in which case. Ignoring this rule usually leads to making reference to the tables and the columns very clumsy because all names must be in double quotes.

  11. the first character of the name must be a letter.

  12. keep meaningful names, but at the same time, do not use long_names_describing_every_single_detail_of_particular_object.

  Sources: https://www.cms.gov/DBAdmin/downloads/OracleStandardsandGuidelines.pdf
  http://www.gplivna.EU/papers/naming_conventions.htm
  http://www.Oracle-base.com/articles/Misc/NamingConventions.php
  http://SS64.com/ora/syntax-naming.html

  Concerning
  Girish Sharma

  Published by: Girish Sharma on March 2, 2012 15:09

  Published by: Girish Sharma on March 2, 2012 15:12

• Backup and storage to iCloud

  Why make backups if you use iCloud storage?

  This should explain it further - iCloud: overview of backup and storage iCloud

• Check and highlight the links broken and work in numbers

  Hello

  I need a formula that can check a column of links and differentiate the working relationships and broken links.

  For example;

  Delete all the links work and leaving broken links in their cells.

  Thanks in advance

  Hi VossoAllison,

  I need a formula that can check a column of links and differentiate the working relationships and broken links.

  For example;

  Delete all the links work and leaving broken links in their cells.

  How do you identify broken links?

  More information, will lead to a solution.

  According to the response of Barry here URL checker, so broken links produce the text "Error 404" or "error 303", sort the table on that column to raise errors. Select and delete the lines you want.

  Kind regards

  Ian.

  Edited by Yellowbox to correct typos.

• My Media Player is not let him come his pass. I tired FixIt and followed all the links there and I still can't get media player to read.

  My Media Player is not let him come his pass. I tired FixIt and followed all the links there and I still can't get media player to read suggestions?
  original title: Windows Audio recording

  Hello

  (1) what version of the Windows operating system is installed on your computer?

  (2) did you of recent changes to the computer before the show?

  (3) what is the file format of the files you are trying to play?

  (4) you get an error message?

  (5) you are able to hear the sound of Windows and other applications?

  (6) that Microsoft Fixit ran?

  You can try the following methods and check if it helps.

   

  Method 1: No sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

   

  Method 2: Problems running Windows Media Player

  Open the troubleshooting Windows Media Player settings Troubleshooter by clicking the Start button, then Control Panel. In the search box, type Troubleshooting, and then click Troubleshooting. Click view all, and then click the Windows Media Player settings.

  See this link:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

  Method 3: Solving problems run Windows Media Player library

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-library-Troubleshooter

• All my files turned .link files and I can't download anything including .zip it's impossible to read .exe files

  I have no internet connection on the laptop (windows xp) after I got this virus any. All my files turned .link files and I can't even open the help and support. When I open the Control Panel, it opens but the icons will lead me not to anywhere. I tried to type in the "Run" dialog box, but it will load and then stop, leading me to nowhere. Evrything is transformed into files .link except internet Explorer, my computer, my documents, the trash and another that I forgot, but even if I open internet, it is useless, since I lost the internet connection. I can't open anything to restore my internet connection. I tried restoring the system also, but it's been so long that it would not return to where it was fine. Also I tried to restore to when it was still very well, but it does nothing. I even tried the safe mode and it is still the same. I tried to format the Local drive, but it tells me to close something that may have been watch the computer or soemthing like that. I formatted the back towards the top but not the local drive. I found the windows xp CD but when the window opens to reinstall, and then when I click on reinstalling windows xp, it won't be going anywhere. The other links will lead to a place, but reinstalling windows won't open. I tried to use the system startup and you press on enter when he went to the Conference of the disarmament/something something and it still does nothing. It will say like taking files from CD or something, but it leads to nothing. I really want to just my laptop to remove everything so I can reinstall windows.

  See if this allows you to format and reinstall XP...
  http://www.YouTube.com/watch?v=Wf2Ffm33DhA

• WRT610N and Motorola SB6120 DOCSIS 3.0 Cable Modem

  I've upgraded to the modem DOCSIS 3.0 in October due to higher bandwidth offerings of Comcast cable.

  Everything was fine until last week when I had recurring loss of Internet connectivity requires me to reboot/cycle my WRT610N and/or modem.

  I updated the firmware of the currently displayed 1.00.03 B15 and reset the router.  This did not help the situation.

  I also tried the suggestions mentioned here, including the Beacon Interval 75, threshold of Frag 2304, threshold RTS 2307, the wide-40 MHz Radio band.  Reset and cycled the router and modem after all this.  I also tried to power off my computer after each reset, all to nothing does not.

  I'm still losing Internet conncectivity several times per hour.  LELA is unable to repair the connection.  So far, the only solution is to reboot the router.

  Do I have a defective router (still under warranty), or is there a problem to interface with DOCSIS 3.0 modems.  Never had this problem with the old Comcast cable modem.

  My WRT610N is version 1 material.  Wireless encryption is WPA - AES, recommended by Beaver in a previous post in August.  Nothing is connected to the USB port on the router.

  Results of 'ipconfig/all' as follows:

  Microsoft Windows XP [Version 5.1.2600]
  Copyright (C) 1985-2001 Microsoft Corp.

  C:\Documents and parametres\joe > ipconfig/all

  Windows IP configuration

  Name of the host...: jb
  Primary Dns suffix...:
  ... Node type: unknown
  Active... IP routing: Yes
  Proxy WINS active...: Yes

  Ethernet connection to the Local network card:

  The connection-specific DNS suffix. : hsd1.ca.comcast.net.
  ... Description: NVIDIA nForce Networking Controller
  Physical address.... : 00-14-22-xx-xx-xx
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  IP address...: 192.168.1.107
  ... Subnet mask: 255.255.255.0.
  ... Default gateway. : 192.168.1.1.
  DHCP server...: 192.168.1.1.
  DNS servers...: 192.168.1.1.
  Lease obtained...: Thursday, November 19, 2009 19:04:46
  End of the lease...: Friday, November 20, 2009 19:04:46

  I "x-out" the last 6 digits of my MAC address for security reasons.

  I would be very appreicate suggestions.  I strongly suspect that I would like to order a replacement from Linksys via warranty RMA router.

  Thank you for reading this.

  Sincerely,

  Joe

  Received the replacement router on 22-11-09.  WRT610N rebuilt with firmware v 1.00.03 B15.

  Installed with the current LELA software.  Wireless laptop was runing Vista 32-bit, Wired PC on XP Service Pack 3.

  Everything works normally again.  Replacement router dropped not a (wired or wireless) connection since its installation.

  I find that my original router (bought about 3/09) was defective.

  After replacement of the router, I upgraded my OS to Windows 7 (32-bit on laptop wireless, 64-bit Wired desktop).  No problem at all with the router.

  Hope this helps others.

  Joe

• Quality of Service with WRT610N and Vonage

  I try to get the quality of Service, in collaboration with my WRT610N and my Vonage device.  The WRT is connected directly to a cable modem, and the Vonage device is connected to the Ethernet 1 port.  I have configured the MAC address of the Vonage on the QoS tab as 'High' priority (done by selecting the 'voice device' on the drop-down list category).  In addition, I put my Vonage options (on the my account page of the Vonage site) to use the higher throughput (90 kbps, I think).  Any other setting QoS have been made.

  However, the router seems not to be the QoS application at all.  If I do any kind of surfing at all (dragging around on Google maps to load new pages of satellite is a good test), the quality of voice over a call during Vonage is very choppy.  What I have to do something else to make sure that the Vonage device gets highest priority?

  Follow these connection parameter:

  Modem (DSL/Cable)-> VONAGE-> WRT610N

  Your Modem must be connected to your VONAGE and your VONAGE Ethernet, plug it into the Internet Port of you router LINKSYS. You also check the VONAGE internet connection by connecting your PC to your Ethernet VONAGE before connecting the WRT610N router.

• The link "FAX and SCAN" is not working (says no link) on my Vista Ultimate desktop.

  Hello:

  I've never used the link "FAX and SCAN" until that earlier, and it failed.  How can I fix?  I have Vista Ultimate (SP2) with all the patches and updates.  I use a gateway GT5438 desktop (with DSL, works very well) connected to a HP Photosmart C6180 all-in-one who has a FAX option.  How can I solve this problem?  Thank you.

  Fax works through the telephone system. Your HP printer may let you fax directly from the printer, if it is connected to a telephone line, you will need to consult your documentation.

  You can search electronic fax software that allows you to send a fax by downloading on a server such as efax.

  Matthew Arkin - moderator answers Windows - Microsoft Partner - Windows Desktop experience MVP - http://twitter.com/Microsoft_Cares - this forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

• What is the date of GA of Foglight for Enterprise Virtualization v. 7.0 and Storage Manager 3.0

  Hello

  I was wondering what should Foglight for Enterprise Virtualization v. 7.0 and Storage Manager 3.0 available for download

  Thank you

  Eli

  Foglight for virtualization 7.0 is now available on Supportlink here. Storage Management 3.0 is available here.

• Any way to recreate a link to 50 pictures at once without matching filenames? that is by replacing the links existing and just replace with new ones?

  I wonder if this can be done with a script in InDesign. I work in 2015 CC and am aware of mobility + select all the links in my control panel links, then click the 'Repeat' in order to recreate a link to each one in succession. But this method still requires me to click on the link I want 50 times, in order to link to these new images in the dialog box that appears.

  That I work with, it's an InDesign file that has 50 different related images, all the same size. They are all small JPEGs arranged in a grid. I create a PDF of each sheet of 50. I need to make several sheets, and each of the 50 images is unique and should not be repeated, so filenames are all unique, so why InDesign is unable (and in this case shouldn't) link to each of them by using the option 'search for missing links in this folder. In order to make each sheet, currently I have to select each JPEG link in the links Panel and manually connect it to a different file name, is not equivalent. It takes me some time.

  Is it possible to automate this process for I can select all 50 instances of links essentially and force InDesign be reprinted at 50 other, even in form and oriented files with no corresponding names, is one fell swoop?

  Hope that makes sense. Until then I will be here by clicking on

  This is easily achievable with data fusion. You must copy your file in an excel worksheet names and the column with the name "@ at the beginning, if InDesign will be acknowledged that they should be images." Then set up a module on the page, and you'll be ready to go.