Linked smart objects nested within the smart object, not automatically update

Similar Questions

• ATL-TAB within the APPLICATION does not work

  I'm a convert from windows and love the mac but Alt - Tab within the application does not work - very annoying. I often have multiple windows in the same application, and if the only way to go is to use 4 fingers Mission control, it's terrible because Mission control lists all windows in a small size and pain to know that you want to go. While with alt - tab, I can quickly cycle or just go to the last which is often I want to go to.

  It is one of the major issues Mac usability for me.

  Any tips? or addons?

  Thank you.

  Cmd -'

  Curiously, this document has the wrong shortcut. Keyboard shortcuts in Mac - Apple Support

  They have to move to the next application window is to go to the previous application window.

• update date and time for 3.6 numbers does not show the time and does not automatically update the date

  The 'update date and time"for numbers of 3.6 does not show the time and does not automatically update the date.  What should I do?  Thank you.

  Hi david,

  where do you find ' update of the date and time.

  Quinn

• The computer is not automatically connect to the printer

  Sorry, I don't know exactly where to put this question, looking for any help I can get.

  Hi, I work with someone who has a range of printers hp 2035 connected to a desktop computer running windows vista. another person has a laptop running windows 7. It obviously takes the laptop home, and every morning when he connects to his computer laptop back to the network it can see the printer, but not to print on it. HOWEVER, it can print a test page, and after that, it is good to go, until his laptop computer goes idle, date to print a test page to print again to it.

  Looks like the computer is not automatically connect to the printer, but idk a permanent solution, guessing just a bit at the moment and it made the test page thing, but is a bit of waste paper right? any help would be appreciated.

  Original title: thing of strange network printer

  Hello

  Method 1: Run the network troubleshooter, and see if it helps.

  Using the network troubleshooter utility in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 2:

  I suggest you perform the steps described in the article:

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows    

   

   

  See also:

  Why can I not print?

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  I hope this helps.

• I have the creative cloud, but when I put my last project on it said it wasn't updated... is not automatically updated cloud? kinda the entire point?

  I have the creative cloud, but when I put my last project on it said it wasn't updated... is not automatically updated cloud? kinda the entire point?

  you have disabled the auto-update feature.

  Click the gear on your desktop app > preferences > make sure that ~ "always keep updated cc" is checked.

• Clip of Label and name not automatically update in the timeline panel

  I just finished a major project, so now that he has the time to take the plunge and upgrade first. So far, it's fine, but the clip labels and names only are not automatically updated in the timeline panel when I change into the bin. Is this something that only works on new projects (rather than old projects updated in this new version)? Or...?

  Go to the menu file > Project Settings > general, and when the component of the project opens, check the box 'display name of project items and label color for all instances.

  

  MtD

• Through remote access vpn Ipsec within the host is not available.

  Team,

  I have a question in confiuration vpn crossed.

  ASA 3,0000 Version 5

  the only question is, to access remote vpn clinet IP cannot access inside the host. However able to reach the branch of IP and it uses corprate Internet.

  In SAA from the external interface I am able to ping remote clint IP but not from within the interface. Please help and let me know if additional information is required.

  Thank you

  Knockaert

  Hello

  For the NAT0 configuration, you only need NAT0 instruction for the interface "inside".

  This single command/ACL should allow for 'inside' <-->'vpn-pool' communication.

  NAT0 configurations on the 'external' interface should be necessary only if you make NAT0 between 2 VPN connections. I guess you could do this since you mention traffic crossed?

  I suggest using different 'object-group' to define networks of NAT0 destination for different ' object-group' to the 'outside' to 'outside' and 'inside' users NAT0.

  I also obsessively using beaches too wide network in the statements of NAT0. According to some records, they can cause problems

  For example, this network ' object-network 172.16.0.0 255.240.0.0 "contains the 172.x.x.x.x set private IP address range. And in this case it contains some of your 'inside' networks too?

  How is this a problem of crossed by the way? You say that the problem is between the VPN clients on the 'external' interface and network local hosts behind the 'internal '? Crossed would mean you have connection problem between 'outside' <->'outside' perhaps.

  I don't know if I made any sense. Can be a bit messy. But can not give very specific answers that I don't know the entire configuration.

  Also make sure you have the "inspect icmp" configured under the policy-map of the world, so that the response to ICMP echo messages are automatically allowed through the ASA.

  -Jouni

• CentOS KVM, KVM based Hyper-v, etc., nested within VMware Player but not Ubuntu?

  Can I get CentOS based KVM, Hyper-V, etc., nested in VMware Player but not Ubuntu based KVM?  Yes, I know that this subject can inspire some interesting comments, but for those who want to ask why?  Please, I beg you, the answer is, because that's the goal.  KVM nested within VMware Player 6.0.1 based on Ubuntu.  The fact that I can get basic nested KVM CentOS and working in VMware Player as well as Hyper-V, I see no reason why I can't get Ubuntu KVM works.  In fact, I can install KVM in Ubuntu and start a virtual 64-bit machine, but once started I never seem to get any sequence start, or at least no video of the boot sequence.  All crack this nut?  Get Ubuntu based KVM working in VMware Player?

  Well, it turns out be strange, but easy to solve, it appears the Ubuntu KVM install at least on 13.10, creation of default virtual machine emulation is set to KVM, which has been deprecated.  Recreate a virtual machine as Qemu/KVM 64 bit, works!  Mystery solved.

• How to debug an application incident that occurs only within the executable and not developing?

  LabVIEW 2011

  Looking for ideas on how to debug an application that crashes only from within the executable.

  Is there something useful that this error report can be used to, thanks in advance.

  

  ####
  #Date: Tuesday, August 23, 2011 15:10:18
  #OSName: Windows 7 Enterprise
  #OSVers: 6.1
  #OSBuild: 7600
  #AppName: LabDAQ
  #Version: 11.0 32-bit
  #AppKind: AppLib
  #AppModDate: 23/08/2011 18:59 GMT
  Base address of #LabVIEW: 0 x 30000000

  23/08/2011 3:10:48.331 PM
  Crash 0 x 0: Crash taken to DENY
  File Unknown (0): Crash: Crash captured by DENYING
  Minidump ID: a1c0be18-ad05-4b09-b914-afe4a3073daf
  ExceptionCode: 0xC0000005± N
  0x3072C874 - lvrt + 0
  0x3072CC28 - lvrt + 0
  0x7C37FDB4 - MSVCR71 + 0
  0x77330DF7 - ntdll + 0
  0x772F9ED5 - ntdll + 0
  0x00000000 - + 0

  I sprinkle a button Dialogs in any code that I can see to what extent the code gets before it crashes.

• 'message inline' within the region does not work

  Using Jdeveloper 11.1.1.1.0
  
  I have problems using 'message inline' whith input text.
  
  I have a text entry with different form and a component for each message.
  No text is displayed in online messages when I click the button and the input text is empty, but
  error messages if pop-up window poster in the world.
  
  It's the source with the components of text input and messages:
  
  ...
  < af:panelFormLayout id = "pfl1" >
  < f: facet name = "footer" >
  < af:commandButton text = "commandButton 1" id = "cb1" / >
  < / f: facet >
  
  < af:inputText label = "Label 3" id = "it3" required = "true" / >
  < af:message id = "m2" for = "it3" / >
  
  < af:inputText label = "Label 4" id = "it4" required = "true" / >
  < af:message id = "m4" for = "it4" / >
  
  < / af:panelFormLayout >
  ...
  
  This source is part of a fragment of a page within a bounded workflow.
  I've included the workflow within the page I run as a region.
  
  Do a few tests, I noticed that all the works very well if I include a page fragment in a subview.
  
  Anyone know what is happening?

  Perhaps around your code with a subview inside of your page fragment might solve your problem.

• Problem Win7: Device driver (* .inf) within the distribution is not installed in setup.exe. Why?

  Hi people,

  We have a device driver (* .inf) to our application that is added to our distribution , we create in CVI. In the past we did copy the *.inf in the /dossier inf directly (using the distribution Installer "files"-Tab "").

  Recently, we have followed the guidelines described in "Using LabWindows/CVI to install your device .inf files.

  So we have now chosen a significant subdirectory of our application as the destination folder for the file *.inf instead of directly copy in the system directory.

  Everything works well (besides the fact that our driver has no signature and needs user interaction), while using Windows XP.

  DIFxApp (run MsiProcessDrivers) recognizes the *.inf file and installs the device driver.

  After completing successfully the setup.exe, the specified *.inf has been duplicated as oem*.inf/pnf under /INF.

  But under Windows 7 the *.inf is not installed. I ran "setup.exe/l * v" for the information of the installation log file.

  And I found this article:

  MSI (s) (8:9 C) [13:56:41:043]: jumping action: MsiProcessDrivers (the condition is false)
  Of course the step of installing the drivers is ignored.

  Choose the /INF in the folder target to the *.inf (which does not work on Windows XP) everything works fine.

  Does anyone know why MsiProcessDrives is ignored in Windows 7? It is always ignored or I do something wrong?

  Help is appreciated!

  Thank you!

  Philipp

  PS. : The device driver *.inf was written for several OS (XP, Vista, Win7) target according to Microsoft guidelines for this. So it of a universal *.inf file and can be used in each operating system from XP to Win7.

  Good,

  I solved the problem myself.

  The problem is related to the DIFxApp.dll , which is available as 32-bit and 64-bit version.

  In my case, I created the distribution as the 32-bit version. That's why 32-Bit DIFxApp.dll is merged into the MSI file that is not compatible with Windows 7 (64-bit).

  This is why NOR added to this CustomAction Condition (NOT VersionNT64) for MsiProcessDrivers, which is perfectly adapted to the species but of by not having is not the *.inf file

  installed in Win7. I guess the distribution building like Release64 it will use the 64-bit Version of DIFxApp.dll. I'm not able to verify that (still works on XP).

  But then it will probably crash on XP.

  But anyway. We have a distribution for the two BONES.

  Quick & dirty solution I figured out:

  -Edit-> files distribution: Add the *.inf file to C:\window\inf

  -Manually add VersionNt64 condition in the resulting MSI file under component -> (you can use the ORCA editor for this)

  So now, in the case of XP, the *.inf file gets installed by DIFxApp.dll.

  Windows 7 using the *.inf is copied directly in the windows/inf folder and installs automatically the first time that the device is connected.

  I guess you can merge DIFxApp.dll (32 bit) and DIFxApp.dll (64-bit) to the MSI and manage things together, create conditions. But it is not quickly implemented. At least for me is not...

  Regards Philipp

• Align layers to the selection within the artboard does not not in 20151114.r.301 x 64

  A very annoying bug has been introduced since the last update:

  If you perform the following steps in a work plan

  (1) make a selection

  (2) select a layer in the layers panel

  (3) layer > align layers to selection > (al six options)

  The layer is not aligned to the selection, but to the artboard instead! Is anyone have a work around?

  By aligning the selection is essential for the harmonization of layers in a drawing or model. I hope that Adobe will solve this ASAP!

  

  This is a bug.

  It's a side effect of change where we allowed layers be aligned with work plans parent; We does not check for an existing selection mask before allowing the artboard to be a widening of the entire alignment.

  Fix is in preparation. Can't comment on the ETA for you, unfortunately. Just know that it is in the pipeline.

  My apologies for the inconvenience.

• Flash Player update is linked to the default browser?  -Flash not automatically updated when Chrome is the default

  Hello

  I managed machines for an organization where the majority of users have no administrator rights.  I put the Flash drive to automatically install updates.  In accordance with article (old)

  How the auto update feature does not work in Flash Player?

  "Normal Flash Player installations require an administrator account. However, automatic updates are executed even if the user is logged on with a standard account. »

  
  

  So I think my clients should be updated automatically to version 18.  However when I check, I see that they have not updated.  After watching cela some more I realize that when I use the control panel to check the updates that he launched Chrome, which is our default browser.  Of course, Chrome is up-to-date, because Google takes care of this.  However if I run IE and paste the URL of the version check in IE I see that flash is not up-to-date.  So, I try to run the update of IE, and when he is finished he launched a Chrome page again.  So it seems to me that Flash player uses whatever the browser is configured as default browser to search for updates with Adobe.  However this will not work if a user has Chrome as their default browser, and also has flash player installed separately for IE.

  
  

  Do you understand my point?  How can I get Flash player automatically updated when a new version is available, even if my default browser is set on Chrome?

  
  

  Thank you

  
  

  Scott
  

  Hey Piyush

  Thank you very much for this information.  So basically the feature to 'Allow Adobe to update Flash Player' does not work in all changes of the version.  I find it incredibly misleading.  Rather that engage in a cumbersome process to allow each year the opportunity to distribute flash and then create group policies to deploy, and then test the results to have these policies in place when flash tries to update itself, pay attention to the current versions of flash in order to deploy new .msi files and update our policies...

  I think I'll just remove the flash of all our systems.  It is clear that after installing flash is a continuous security risk and it is regrettable that we cannot rely on Adobe to help keep their own software update in a simple and effective way.  It's amazing to me that Google can do a better job of keeping flash updated in their browser at adobe.

  Thank you

  Scott

• Problems with the upgrade to Windows Windows 7 10 and get the message 'could not be updated. "portable

  Original title: Windows 7

  I have 2 questions-

  I have a laptop Windows 7 when I tried to update Windows 10 received a message that it could not be updated.  Has there never been a solution or an update for those of us who have a version of Windows 7 which initially could not updated for Windows 10?

  I have a computer I upgraded Windows 10 and really like it.  I do not understand that I can not make a copy of 10 Windows on a computer, I've updated for Windows 10.  Is it possible for me to download a copy of Windows 10 on my laptop Windows 7 to make a restore CD in the case of a computer problem?

  You can try the upgrade manually:

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10
  • How to: determine if a device application or hardware is compatible with Windows 10
  • Will remain the documents and applications, or install app must

  then

  • How to download official Windows 10 ISO files
  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  then

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times, and then try again.
  • Disable the general USB peripherals (for example - smart card reader).
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Perform a clean boot, restart, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
  • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

  You also have the possibility to choose 'Keep personal files only', which guarantees a successful in most cases installation.

• How to make a video of the muse does NOT automatically.

  Hey guys,.

  I worked on my portfolio website and I just completed and transferred my show reel. For this video, I decided to integrate it within the muse herself, rather than upload on youtube. I created my html code just by watching a few tutorials, however, no matter what I do the video will play automatically as soon as lance Web site.

  This is the code I use:

  < iframe title = "my showreel |" 2016 | Show Reel"width ="853"height ="480"src ="http://mywebsite.businesscatalyst.com/assets/myvideo.mp4"frameborder ="0"allowfullscreen > < / iframe > "

  Is could someone please tell me what I need to add to it to make it simply play when the person presses play.

  Thank you

  Liam

  Hello

  Instead of Iframe I advise you to use the HTML5 video tag to add the video.

  Please see an example in the link below:

  How to integrate a mp4 video in my muse site.

  Kind regards

  Vivek