Linking the legends index

Similar Questions

• The boxes "trace the legend" a link to Boolean values

  Hi all

  I save data to data acquisition of a waveform graph (where channels are displayed as plots of different color on the same chart) and I want the plots "unchecked" in the legend to go unregistered.

  Ideally there would be a sort of Boolean value associated with each checkbox which I could then use to say ' Yes, 'save' or 'no, do not save. ''

  Is it possible to do this? Or is there a better solution than that?

  I assume you are referring to the "plot visibility cases." You can use the two nodes of the graph property: Plot Active and Visible Plot. Together, those that you should get the information you want.

  Lynn

• How to remove a parcel and resize the legend of the plot in LV 8.6 as in this link to an example 7.0 LV

  This VI (ftp://ftp.ni.com/pub/devzone/epd/201150.vi) works exactly as I want to apply for a 8.6 at-, but the property node used in the example is no longer supported.

  I can add/remove sites and resize the legend of the plot with 8.6 using the 'LegNumRows' property, but this property does not behave in the same way.

  It seems like it should be simple, but I must be missing something.

  Thank you to confirm that this property does not work in the same way as in the example when it is used with a XY graph clusters and no dynamic data.

  I left the property node in the structure of the case (just as it was in the original example) while not to jam too when you went to compare two examples - my application does not for the reasons you stated.

  I will implement a legend Manager to ensure the follow-up of the plots in the legend.

  Thanks for the validation test!

• Some links the web pages were replaced with fixed references on a saved page

  I saved a http://www.lilypond.org/doc/v2.18/Documentation/notation/index.html page on my hard drive. The links in the table of contents on the left are all on the original site. I looked at the file on the disk, and this is the case. "An example is < a href ="toc-spacing-questions-1"name ="http://www.lilypond.org/doc/v2.18/Documentation/notation-big-page#spacing-issues"> 4. Spacing problems < /a >

  But the original file had links the in the same place (an expert Web site it tells me), < a href = "toc-spacing-questions-1" name = "rating-big-page #spacing - questions" > 4. Spacing problems < /a >

  Not all links are changed: some of them in the body of the text are links local. What I find even more bizarre.

  Why (and how) Firefox changes the HTML text?

  Thanks Finitarry - but the links are changed to point to the original server, not my downloaded copy. That's the problem!

  Also thank cor - el. I use "web page, complete" for download.

  I think I found the problem, now that you pointed out where I should be looking. I found the original HTML code, and in most cases, the references are strictly local. But in the case of problem, the link contains the name of the file, what Firefox interprets as an application to point to the original file on the server rather than the local copy. Is this is a bug or a feature would make an interesting discussion. I'm going to ask that the web Manager is is what they meant to happen. I'll try another browser to see what happens there.

• Determine which cluster and the array index element was clicked on table clusters

  Hello

  I'm overload of brain with dynamic events and references and nodes of property etc.

  I am trying to identify the cluster and the array index element that was clicked on table clusters

  This gives me the name of the element:

  

  Is this reasonable?  How can I get the index?

  Thank you

  Paul

  Hello

  Download the VI in this link (also attached).  It gives you the index of the array element that you clicked. Hope this will help you.

  Kind regards
  Nitz

  (Bravo to give good answers, mark it as a Solution If your problem is resolved)

• create the reference with the legend Info

  Hello

  I have on my side of a large number of controls, 152.

  I have an array of items with a value of 152.

  I want to load the values in the controls on the right. All controls have a legend with the same value as the index of the element.

  Is it possible to load the values in a loop?

  The element, get the reference and load the data via a property node?

  So is my question possible to create a reference to a control by giving the caption of the control as input?

  Suggestions are welcome, I would like to avoid to connect values 152 152 controls.

  Thank you Kim

  Kim,

  The loop is the right idea.

  You cannot create a reference to the legend.  You can get an array of references to all the controls in the Panel.  Then you can search the legend that corresponds to the one you want.  When you find a match, use this reference to write to a property value node.

  Legends are easily changed.  It is probably best to use the label, which cannot be changed programmatically when the VI is on, for research and the match.  You can display the caption to the user and hide tags if it's better for the user interface.

  Lynn

• Linking the accounts on new resources

  Hi all
  
  
  In an existing IdM 8.1 environment, I have to add two new resources. I modified the role definitions without users update, now I want to link the new resource with ActiveSync process accounts.
  
  I realized I can link the user resource accounts to tabs and it works correctly, but running ActiveSync can't "CONFIRM" link account.
  
  What Miss me?
  
  Thanks in advance,
  KK.

  Previous answer was a little off :D

  -> Rule of correlation find matching user [s]
  Rule of confirmation-> Confirm?

  At least, I hope it works, we do not confirm it since our correlation will bind 1<->1
  where our index counts on this resource is UNPARALLELED __UNKNOWN__, but is not serious for us since we have
  This allows to refresh the display anyway...

• How centering the legend and set its display property to block in Dreamweaver cc?

  I am a newbie to Dreamweaver and articles http://www.Adobe.com/content/dotcom/en/DevNet/Dreamweaver/article-index.html by David powers has been very useful for me.

  I followed all the instructions which he describes and wow, I am happy with myself. However, at the present time, I am on article: http://www.adobe.com/devnet/dreamweaver/articles/first_website_pt3.html, but I'm stuck on the subtopic:

  Hair images with captions.

  Up to now, my question is: How do I Center the legend and set its display property to block in Dreamweaver cc?

  Please forgive me if this question seems so childish!

  Thank you for your assistance expected!

  Sincerely,

  Newbie

  If you look in the css file over to the figcaption css selector you will see:

  figcaption {}

  display: block;

  text-align: center;

  make-weight: bold;

  do-size: 14px;

  }

  As I don't use DW css Panel, I can't tell you how to do that through that, BUT doing it manually just open the file main.css figcaption roller and the type it as shown above.

• TOC problem, dots and page due to the exhibitor/index number

  I have a few titles in my book ends with a character exponent or index. When I create the table of contents, points (tab) and the page number for these titles are written in address/subscription.

  I tried to create a syle of specificity for the character of the exhibitor/index, but these are inherited in the table of contents.

  I also tried to break the link to the style, specific character, however, the problem is that the entire title lost its reference to style and is not printed in the table of contents.

  We solved this problem in configureing the paragraph style that we used to tab (points) and the number in the table of contents to have only the Normal Position. This way we had set up every title that has the subscription.

• Pass fast values in the legend / '- ALL -' filter filter all records

  Hello
  
  I have 2 questions for a same graph, so I hope it's OK to add them in a post.
  
  First I created a graph and added three filters in the Select list that are working well, the query is less, problem is that when I change to "- ANY -" I get no data, it eliminated all records as no data is the value of "- ALL -" don't - does anyone know the code to work around this problem?
  
  My graphic request;
  
  
  --------------------------------------------------------------------------------
  
  Select the link null, data P_MONTH as MONTH, SUM (CALLS) as
  
  from the DATA. MAIN_DATA
  
  THE WAREHOUSE WHERE =: P1_WAREHOUSE
  
  AND ANS_UNANS =: P1_ANS_UNANS
  
  AND PRODUCT =: P1_PRODUCT
  
  P_MONTH GROUP
  
  
  --------------------------------------------------------------------------------
  
  As I have several queries like the one above for different options on the same chart, I would like that the legend to show what the user chose every time the options change IE;
  
  Something like the bold text in the query to display the values in the legend;
  
  
  --------------------------------------------------------------------------------
  
  Select the link null, P_MONTH as MONTH, SUM (CALLS) as "P1_WAREHOUSE". "P1_ANS_UNANS" | 'P1_PRODUCT '.
  
  from the DATA. MAIN_DATA
  
  THE WAREHOUSE WHERE =: P1_WAREHOUSE
  
  AND ANS_UNANS =: P1_ANS_UNANS
  
  AND PRODUCT =: P1_PRODUCT
  
  P_MONTH GROUP
  
  
  --------------------------------------------------------------------------------
  
  Any ideas / suggests?

  Hello

  OK - the page looks ok now.

  You had a WHOLE and one entry in the list of categories. I think that ALL were on the list of values at some point definition and Apex had updated it's reference to the LOV was then still which he. I refreshed the LOV page delete this entry, set the return value zero 0 (as all values are numeric - you're dealing with values of salary - you must use 0), added a calculation to the page to set the value of the list to 0 if it is NULL, and erased the SUM() and GROUP BY in the series of the chart (which is not necessary).

  Andy

• Dynamic effects of HTML like Drop Down the legend and the body does not

  I use TC 2.0, soon to be upgrading to TSC 3.0.  When I try to create Drop Down Caption and Drop Down body elements in FrameMaker and Robohelp update, it does not work.

  I have the text as:

  Drop down menu test legend

  Which I note and go to the Adobe RoboHelp-> DHTML Effects-> menu Drop Down Caption and apply the style of paragraph DropDownCaption to.  I then text like:

  Test menu drop-down body

  Which I pointed out and go to the Adobe RoboHelp-> DHTML Effects-> menu Drop Down body and apply the style of paragraph DropDownBody to.

  I update my Robohelp project (related to my project of FrameMaker) and get a 'clickable' of Test Drop Down legend which I click and Interline additional just pop-up. My Test drop down of the body  text is still there, doing nothing.

  You mind, I can do this in RoboHelp directly without any problems, but then I have the problem of update of the project of FrameMaker and that it get rid of all my work of RoboHelp project. Is it possible to get this working in FrameMaker?

  Please check if there is an empty paragraph between paragraph style Drop Down the legend and the paragraph with the style of Drop Down Body in the FrameMaker document. For RoboHelp, to recognize the link between the two, Drop Down body paragraph must immediately follow the Drop Down Caption paragraph. Avoid any empty paragraph between the two.

  MILIN

• setFocus pathing in order to link the PDF

  I'm over my head.

  Because that would be my first experience with Javascript (apart from taking
  the class develop forms), I'm in uncharted territory.  Please take
  a minimum level of experience of Javascript for all suggested courses
  action and thanks in advance for any help.

  My process is (or will be, hopefully) the automatic transformation of a
  input XML into a potentially long PDF file consisting of 3 sections: the
  Body, annex and Appendix B.  Appendices A and B will be dynamically
  built from content in the XML input file.  I think I'll end up
  compose each section independently, then use assembler to put the
  three compound of sections together in a single PDF file.

  The body is composed of several smaller sections, each of which can contain
  (among other things) one or more tables.  The instructions of the user
  must take all tables with more than 25 lines and move them to the body
  in Appendix A.  For these instances, I'll need to introduce a link in
  the section appropriate to the table in Appendix a.

  I can imagine introducing a tableLink recurring element within each section
  for the links in the table in Appendix A. I would use XSLT to parse the XML and the ferret
  large tables, put the table index in my new item tableLink.
  In the form, the Click event for the button tableLink would have the
  setFocus method, which will be the value of the tableLink
  element to build the path to the appropriate extensible in table forum
  Appendix A.

  Ugh.

  I decided to experiment with something a little less variable.
  I introduced a button in the form fragment for the article body
  link to an instance of the specified section. I then used the section
  fragment of a top level as a repeating subform form. I associated
  a new using the setFocus method, try many different paths
  variations (like. xfa.form.ItemName.MRCGroup #MRC [4] - where the MRC is the)
  the name of the repeating section) to get a jump in the PDF preview of the
  first to the instance 5th of the MRC, but none worked.  It doesn't throw
  any error, but or not he jumps to the bottom of some pages, as planned.

  Can someone help me with setFocus multiple paths to a particular build
  instance of a structure repeated in a larger shape?

  Take the issue to a higher level, how I will build the setFocus
  path of the body in Annex A or B of annex once I assembled the
  three distinct sections in a single PDF?

  [Can it sounds something like: 'xfa.form.AppxA. #Table [$variable']
  (where $variable is the value of the tableLink)?  Or would the
  different being at the Summit as the three parts of my document will
  grouped into new single PDF in assembler?

  Thanks in advance.
  Dan Bono

  There is nothing wrong with your logic... the question is that the cursor can be placed in a field that backs do not yet exist. From the point of view of Acrobat, the field does not exist until the script that created it exits. So if you try to move the cursor in the same script as the addInstance doea then it won't work (because Acrobat is not yet registered objects). You can use AcroForm command to run a command at some point in the future. I used this technique to accomplish what you want. Here's the command:

  var

  setField = app.setTimeOut ("this.getField ('form1 [0].)") Page3 [0]. TextField4 [0]') .setFocus (); (', 1000);

  Where 1000 is the waiting time before execution of the command in milliseconds.

  Note the reference to the object in its complete form.

  Paul

• APEX4: the initial index to help creation fails

  Hello
  
  When I tried to use the search mechanism in the help, I got the following message when creating Oracle text index:
  
  ORA-20000: Oracle text error: DRG-11605: store URL: document specified by http://localhost:8080/i/doc/AEADM/wrkspc001.htm not found
  
  Is this a bug?
  
  Lucian

  Hi Lucien,.

  I encountered this error also... It seems that there is a page either missing or
  the reference is simply not true. The mentioned directory contains a file 'wrkspc.htm '...

  So it is a task for the APEX dev team... but there are two workaround solutions for an index created and
  You can't wait... :-)

  1. copy/link the file 'wrkspc.htm' to 'wrkspc001.htm '.
  2. create a fictitious file named "wrkspc.htm".

  If you use the Apache Web server with mod_plsql just navigate to the images directory.
  Explorer the subfolder/doc/AEADM and make an operation "ln" or "cp".

  If you use the embedded PL/SQL Gateway, you can do this with SQL (as a SYS)

  declare
  r boolean;
  begin
  r:= dbms_xdb.createresource('/images/doc/AEADM/wrkspc001.htm',xdburitype('/images/doc/AEADM/wrkspc.htm').getclob());
  end;
  /
  

  After that try to re-create the index - it should work now...

  Best regards

  Carsten-

• Measurement of the Intial Index change.

  I have the Index below
  
  CREATE INDEX abc. Alpha on abc. Beta
  (Gamma)
  LOGGING
  TABLESPACE xyz
  PCTFREE 10
  INITRANS 2
  MAXTRANS 255
  STORAGE)
  INITIAL 4096M
  ACCORDING TO 1 M
  MINEXTENTS 1
  MAXEXTENTS 2147483645
  PCTINCREASE 0
  DEFAULT USER_TABLES
  )
  NOPARALLEL;
  
  I want to change his initial extent something like 1 M I have among other indexes on the same table.
  
  When I select * from dba_constraints where owner = 'ABC', table_name = 'BETA' and CONSTRAINT_NAME = "ALPHA";
  
  
  OWNER CONSTRAINT_NAME, CONSTRAINT_TYPE
  
  APPL_ICL R ALPHA
  
  
  An array of Type = daily partition on it
  Platform - Solaris
  Oracle - 10.2 0.3
  
  How can I change?
  
  Thanks in advance

  Hello..

  The Oracle Documentation

  INITIAL and MINEXTENTS storage settings cannot be changed for an existing table, the cluster indexes. If only one SIDE is affected a segment, the next incremental step is only the size of the extent of the NEXT and subsequent new modular by PCTINCREASE as usual.

  Reference:-[http://download.oracle.com/docs/cd/B19306_01/server.102/b14231/schema.htm#i1006488]

  If you can't change it. Delete the index, and then create it with the new size of the original measure.

  [http://download.oracle.com/docs/cd/B19306_01/server.102/b14231/indexes.htm#i1106482]

  HTH
  Anand

  Published by: Anand... on March 3, 2009 12:33 AM

  Link added

• How is it when I send photos to send to send to someone... the legends do not give.

  How is it when I send photos to send to send to someone... the legends do not give.

  Because captions are not part of the picture.