List of conditional selection without redirection on the Action Page

Similar Questions

• Its results are not redirect to the respective pages

  
  Hi all

  I configured ITS Peoplesoft peopletools 8.53 and ELM 9.2 instance.

  After you have everything configured, ITS search results arrive correctly but is you click on it, it is not redirecting to the respective pages.

  This is to show the error on the page in the status bar of Internet Explore.

  Could you please help me to solve the problem.

  Thanks in advance.

  AJMAL

  Hello

  Probably you are encountering the problem that is described in this document of knowledge "My Oracle Support":

  Doc # 1551951.1: Search 'Results list' contains links that do not work because they are built with the incorrect URL

  Here is the solution:

  ------------------------

  Make sure that the content/portal URI are set correctly on all nodes the.  This can be done as follows:

  1. connect to the PeopleSoft application

  2. go to PeopleTools Integration Broker, integration configuration, nodes

  3. sort by "Local node".

  4. for any node where "node Local = 1' do the following:

  a. set up the node

  b. go to the tab "portal."

  c. ensure that the text "URI Content" and "Portal URI text" are properly defined.

  For example, if your Integration Broker is on myserver.mycompany.com:8000 and your site is called hcm, you would use these values:

  Text of the URI of the content = "http://myserver.mycompany.com:8000/PSC/hcm /"

  Portal of text URI = "http://myserver.mycompany.com:8000/psp/hcm /"

  (Write it down "/" at the end of the values.) Make sure you remember that)

  d. make sure this change is made to all nodes. For example, for HCM, this aspect should be defined for nodes PSFT_HR and HRMS.

  5. after making the above changes, you need to rebuild the search index. Do this as follows:

  a. redeploy all the definitions of research that were built with the incorrect URL as follows:

  -Go to PeopleTools, research framework, Administration, deployment/delete the object

  -Box next to the definition of inactive research

  -Click "undeploy".

  -Once finished, check the box next to the definition of research and this time click "deploy".

  b. rebuild search indexes

  -Go to PeopleTools, research, Administration, research agenda Index

  -Bring the command run to perform a build of the full Index and launch it.

  c. Once finished the process ' Building for Search Index ', re - test and verify that the problem is solved.

• How to set point values when redirecting to the same page.

  I just create a button to redirect I want to redirect to the same page and place 2 elements on the page to the same value they had before the redirection.
  But I can not write:
  Place these items: P1_Permit_Number, P1_Fishing_Year
  With these values: & P1_Permit_Number, & P1_Fishing_Year.
  
  Because there are no values in session state, because a shipment has not been done.
  
  So, how can I do this?
  I know how to get the values stored in the elements, for example, $v ('P1_PERMIT_NUMBER')
  but where should I put this command? It is not allowed under the "with these values.
  And I don't really want to make a button "submit" and create a process that says:
  P1_PERMIT_NUMBER: = $v ('P1_PERMIT_NUMBER'), because that would complicate the page too - I already have other branches and the process on the pages which conditions have to be modified so that they do not work in this scenario.
  
  Thank you.

  Hello

  The syntax seems correct to me. Your summers of uppercase element names?

  Try:

  alert("Here");
  var permitNumber = document.getElementById('P1_Permit_Number').value;
  alert(permitNumber);
  var fishingYear = document.getElementById('P1_Fishing_Year').value;
  alert(fishingYear);
  var url = 'f?p=&APP_ID.:1:&APP_SESSION.:Vessel_Display:::P1_Permit_Number,P1_Fishing_Year:' + permitNumber + ',' + fishingYear;
  alert(url):
  window.location.href = url;
  

  All alerts MUST display expected values. Doesn't it?

  Andy

• Journal of R12 SSO on redirecting to the home page of R12

  Hi all

  I joined R12 with SSO. After clicking on connect, it redirects to the home page again after trying for a while to close your session in the sso page. Help, please.

  Environment, R12.1.3, Aix 6.1

  Kind regards

  Cherkaoui

  Hi Haran,

  Please confirm if the recent changes have been made, and this feature was working fine before.

  Please see if you can find more details in the log of Apache and Application files.

  Please also have a look at the notes:

  Logout link in E-business Suite does not return to the SSO login Page when using Ondaaah (Doc ID 735308.1)

  Thank you &

  Best regards

• How can I redirect to the login page when the client disconnects?

  I use {module_logout}, how do I redirect to the login page when a client disconnects?

  Thank you for posting.

  You can redirect the user to the login page using a small java script code. Please visit the following link http://kb.worldsecuresystems.com/598/bc_598.html#main_Redirecting_to_another_page

  See you soon,.

  Scott Raj Rouanet

• Insert the Page without re - apply the Master Page

  Hi, using InDesign CS5, I try to insert a page after page 1 of a catalog without re - apply the master page to all pages that follow - is - possible? I have set up in the master that I would delete not instead of text boxes.

  Any advice would be much appreciated.

  See you soon,.

  DC

  Sorry, I know that this was not clear.

  When a page switch sides in the spread of the elements of the template that have been overridden, as blocks of text in which the text has been flowed, will be maintained, but the new position of the page also has main objects and these masters objects will all be there. In the case of things like the headers or footers or other objects that have not been overridden, new objects will appear and the 'old' will disappear, but for what it is overridden, you'll have the old and the new. Without using something like the plugin Pro Auto-Flow - Tools.com, the only way to avoid this is to add or remove multiples of two, or rethink the use of the main object. These blocks of text should be on the master page? You can "auto format" text without master images, and most of the time setting the margin and column guides to contain the flow is preferable to the use of a block of text type for precisely the reason that you see.

• Redirect to the same page with the values of the variables

  Hello

  I develop a form to report data of the certain date range provided by the user.

  The problem is that I have to redirect the page back to the original page with the error message "not found in the date range" If the provided date range contains all the data in the database. I am able to redirect the page to the original page for help:

  < cfif queryname. RecordCount EQ 0 >

  < cfset action 'error' = >

  < Cflocation >

  < / cfif >

  And I use the < cfparam > for the creation of an action to navigate in the code, variable

  < name cfparam = "action" default = "" >

  [Use the < cfparam > above, tag at the top of the code and using action EQ 'report' and ' ' for navigation in the code]

  But, when I redirect to the same page, with the variable value measures of error and using cflocation he forget all varable values in the new page [way], then how can I pass a variable value measures on the same page and redirect it to the same page on meeting certain criteria.

  If this isn't clear, let me know.

  Help, please

  Vijayvijay77.

  vijayvijay77 wrote:

  
  ...

  
  

  And I use

  a kind of cfif to navigate inside the code. I'm doing something wrong here.

  You say that you guessed it at work.  But you have a dangerous code here (if you have not changed).

  The line will generate variables URLS when ColdFusion processes the page.cfm file once requested by the browser.  For example url.set and url.flag.

  Tags are NOT specifying the scope of variables, so they will default to the scope of "variables".  Who are the local variables of the demand for treatment.  For example variables.set and variables.flag.

  URL.set and VARIABLES.set ARE NOT the same variables.  And this confusion can cause some VERY difficult to diagnose the problems of code.

• List of selection with redirection sets the values to null

  I saw another post with a similar issue. However, the answer given does not work for me.
  
  I have a "Site" text field whose value depends on a list of select 'customer '. I am able to set the value of "Site" based on the select list with redirect. However, other values on this page are reset to null.
  
  I saw an answer that says to change the display of selection list type to "select the list to submit." But this type of display requires a page that deals with the process is created. This solution did not help either.
  
  Any solution?

  If you follow this example, you will be able to set the status of the session without redirection / layout page:

  http://Apex.Oracle.com/pls/OTN/f?p=31517:229

  Denes Kubicek
  ------------------------------------------------------------------------------
  http://deneskubicek.blogspot.com/
  http://www.Opal-consulting.de/training
  http://Apex.Oracle.com/pls/OTN/f?p=31517:1
  ------------------------------------------------------------------------------

• Selection without stopping at the brush

  I don't have an advantage with feathers and I a hard brush, but the mobile dotted lines are not stop my brush does not slip on their border.

  What makes my brush ignore my selection and painting in the unselected area?

  Maybe it's that you see an overlap of the layer mask on the layer below.  We can see that it has a layer mask which seems to be the inverse of the layer mask on the layer of color fill 1 , but if it's not the exact reverse, then you might not see what you expect to see.  Try turning off the background copying

  

• Redirect to the new page of pl sql / process page?

  Hello

  I'm working on a page with a form for users to download the data.  When you press the "submit" button, it runs a process Page.  After the process is complete (i.e., to insert a new record of DB) we need to create a branch to a new page with treatment notes (defined in the process).  I tried to save the notes to an item on the first page and then configure a branch that fires "to submit, after treatment...". ' and includes notes in the industry, setting the value of an item on the new page.  It works in part but seems to truncate the value of the notes.  Is there a limit to the length of the string that can be passed via a branch page?

  Or is there a better way to do it?  Maybe there is a way to branch directly in the process?  If so, it would be easier because I wouldn't have if all goes well define a page element, just to pass this value along to the new page.

  Thank you

  Steve

  Hi Steve. 1234555 - Oracle,

  Agree with the suggestion of fac586:

  The value of the item on the new page can be defined directly in the process, or later without including the value in the branch (make sure that the direction is not clear the session state in the target page). Even better would be to give notes a structure to put them in a collection and displays them using a report.

  Here's how you can do if your process is PL/SQL:

  DECLARE
  
    L_NOTES VARCHAR2(512);
  
  BEGIN
  
    -- process for insertion and setting notes
  
    -- setting notes item on page to be branched
    APEX_UTIL.SET_SESSION_STATE('P2_NOTES', L_NOTES);
  
    -- redirecting/branching to the page
    APEX_UTIL.REDIRECT_URL (
        P_URL => 'f?p=' || :APP_ID || ':2:'|| :APP_SESSION ||'::NO:::' );
  
  END;
  

  Reference:

  • APEX_UTIL. SET_SESSION_STATE
  • APEX_UTIL. REDIRECT_URL

  I hope this helps!

  Kind regards

  Kiran

• Successful login ADF redirects to the login page

  JDeveloper 11.1.1.6

  Simple login page, simple first page.

  If the connection is successful, then it just goes back to the login page, rather than on the first page.

  I have "redirect after successful authentication" selected and pointing to my first page.

  If incorrect credentials are entered, then it goes to the error page as it is supposed to.

  No idea why this is happening?

  Login.HTML is the welcome file in the xml web, so when I run the app on my weblogic server built-in, this is the first page I see.

  No, it will not work like that.

  Home page is the page server that uses when there is no http request to a specific page within the web application context (for example, when you enter just: http://hostname/ReportServer: port/YourContext).

  In your case, if your authentication was successful, you will be redirected back to the login.html page (because it's your home page)

  Instead, add faces/firstPage.jspx in your login page (I don't know if you need to end .jspx)

  or

  Run your firstPage.jspx

  If you are not already authenticated, the server will redirect you to the login page, and after successful authentication redirection, you return to the page defined in the ADF (firstPage.jspx) Security Assistant

  (and note that, by default, ADF Security only protect pages that have pageDef)

  Dario

• Why I always automatically redirected to the French pages?

  When I type an address .com (or any other extensions not French) I get automatically redirected to an address .fr and I really hate this. If I want a French site, I'll ask for it, I don't have others to decide what I want. Sorry, nothing personal, it's just my frustration talking. I put Google.com on the opening page, and it has worked well so far. When I open an additional tab that I not redirected to .fr is probably not you, I just hope you have a solution to this very annoying feature.

  How can sites I report your location?

  See also:

  • Google: http://www.google.com/support/bin/answer.py?answer=873

• Redirect to the original page after login

  Hello, I'm new in the Fusion of the ADF, I'm trying to get my program to do the redirection, submitted by the user, after logging, page example: otherwise

  the user is connected to the session, and someone is trying to access a path in the browser (... faces/protected/admin/page.js) JAAS (Yes, I use JAAS, JAAS not ADF security, so I tried that before JAA redirect to the login screen, he kept the URL TO which the user has tried to do that when connecting the user to the system, it redirected to this page) not a standard page...

  I tried to recover using this url PhaseListener, filter using the filter applications (/ *) and using the < f: event > someone at - it suggestions?

  OBS: authorization and authentication with JAAS is ok, I wanted to just implement this dynamic redirect

  I create the hidden entrance and a button to test the parameter:

  public class test {}

  @ManagedProperty(value="#{param.from")

  private String

  I don't know if the injection with @ManagedProperty will work.

  So, first make sure that hidden field a correct value (you can check this in the source of the page, or you can add a component any visible...)

  If this value is correct, you can try to evaluate EL inside your connection method with:

  public static String evalAsString(String p_expression){
      FacesContext context = FacesContext.getCurrentInstance();
      ExpressionFactory expressionFactory = context.getApplication().getExpressionFactory();
      ELContext elContext = context.getELContext();
      ValueExpression vex = expressionFactory.createValueExpression(elContext, p_expression, String.class);
      String result = (String) vex.getValue(elContext);
      return result;
  }
  
  and then:
  String from = evalAsString("#{param.from}");
  

  Dario

• Cannot start any laboratories redirection to the home page

  Hello

  I am unable to start any labs. After about 01:40 minutes showing from laboratory it redirects to the homepage starting even I do not seem to be connected.

  I'm trying to start the HOL-SDC-1610 laboratory. Can someone please help?

  I already checked my laptop computer time settings and good sound.

  -LP

  Unfortunately, if your only access to Internet from your corporate network is via the authenticated proxy, there is nothing that you can change on your local computer to make a difference.

  In these cases, our users usually access to the laboratories of their home networks or public access, rather than the corporate network point.

  -Doug

• Selection of items on the next Page

  I have some difficulty to select the text block on the next page for some reason any. I looked at some previous discussions and he doesn't seem to be mentioned solution. Is there a better way to do it? Thank you!

  doc = app.activeDocument;

  


  


  for (i=0; i<doc.pages.length; i++) {

            currentPage = doc.pages.item(i);

            nextPage = doc.pages.item(currentPage.documentOffset+1);

  


            if (nextPage.textFrames.item(0).paragraphs > 2) {

                      currentPage.textFrames.item(0).textFramePreferences.verticalJustification = 1785951334;

            }

  


  


  }

  


  Never mind! Just thought out for anyone interested... turns out it was something small. He kept giving an error because when he would get at the end of the document he will be looking for the 'next page' and it would not find a. 1 subtraction of the length of the document appears to remedy.

  I wonder how many times people mark the correct answer own...

  doc = app.activeDocument;

  


  


  for (i=0; i

            currentPage = doc.pages.item(i);

            nextPage = doc.pages.item(i+1);

  


            if (nextPage.textFrames.item(0).paragraphs.length > 2) {

                 alert("Stuff");

            }

  


  


  }