New XBOX 360 S cannot connect with Linksys WRT54G2

Similar Questions

• New Vsphere servers (2), cannot connect with vsphere client

  It's strange, that it is a new construction on 2 new servers. With ESXi5 it really doesn't matter what config install so there is nothing to screw it up, so I did the installation of STD, then tried to connect to the server with the client and I get 'call 'ServiceInstance.RetrieveContent' to object 'ServiceInstance' on the server '10.70.1.20' failed.

  This happens on both servers.

  Other messages suggest it is because of the attempts to connect using HTTP instead of HTTPS, but I do not use a prefix, just the IP address.

  If I type the IP address of the server in a browser, I get the standard server ESXi web page so IP connectivity is fine.

  The other strange bits is that I have 3 ESXi 5 server to different hardware built using the same media that works well.

  The vi client log shows this:

  < type = "VirtualInfrastructure.Exceptions.ConnectionError error" >
  < message > the customer has not received a full response from the server "10.70.1.20". (The underlying connection was closed: an unexpected error occurred during the reception.) < / message >
  < InnerException type = "System.Net.WebException" >
  < message > the underlying connection was closed: an unexpected error occurred on a receive. < / Message >
  < InnerException type = "System.IO.IOException" >
  < message > received an unexpected EOF or 0 bytes of the transport stream. < / Message >
  < / InnerException >
  < Status > ReceiveFailure < / status >
  (snipped)
  If I enable SSH and SSH on the server, try PuTTY gives me an error 'incoming packet was scrambled on decryption.
  It seems therefore that encryption is screwed somehow, but since I can't connect to the server I'm strugglin for troubleshooting options?
  Any ideas?

  https://www.VMware.com/support/vsphere5/doc/vSphere-ESX-vCenter-Server-50-release-notes.html

  From the release notes:

  Using the env of BE2/BE2 Emulex Group (pilot be2net)
  When using vSphere 5.0 with Emulex BE2/BE3 NIC (pilot be2net) in an environment FlexFabric/Flex-10 HP or IBM Virtual fabric adapter (VFA), connectivity may not work properly on virtual machines Windows or server when them VLAN is configured.

  Workaround: Do not use the driver included with vSphere 5.0. Before the upgrade to vSphere 5.0, you can get an updated of Emulex, HP or IBM driver that should be used on HP FlexFabric/Flex-10 or IBM VFA systems.

• I can't create a new site of catalyst for business with Dreamweaver CC 2014. The error message states that Dreamweaver cannot connect with the server, try again later. How can I solve this problem?

  I can't create a new site of Business Catalyst with Dreamweaver CC 2014 (Mac). The error message states that Dreamweaver cannot connect with the server, try again later. In addition, I am also unable to load remote site Business Catalyst created previously as it says that there is something wrong with my user name or password. However when I put my password and press to test the connection, he said that it has connected successfully. What is wrong and how can I solve this problem?

  Thank you

  Thanks for the reply, however it seems to work again after I removed some unused Dreamweaver sites in the section "manage sites" in Dreamweaver.  It may have been a conflict of name or something.

  Concerning

  Adrian

• Skype cannot connect with the latest version?

  Hello there guys. I got the error "Skype cannot connect" with the latest version? I tried to reinstall Skype, so that delete my Skype folder in %AppData%, it did not work, I have to do? I tried to log in with your new account, still no luck? How can I sign in Skype... ?

  So I just fixed my problem by installing win 8.1 Pro 64 bit hehe Thx for the help anywayz.

• The Xbox 360 wireless controller works with PC, or what I have to buy the Xbox 360 Wireless for windows?

  I want to know if the wireless Xbox 360 controller will work with a PC if I just buy the receiver, or I have to buy the real Xbox 360 controller for windows to work?  Because I just bought the receiver only and installed, but when I try to connect it to the controller the controller just flashes and never connects.  Which leads me to believe that there is something different with the Xbox controller for windows.  Please let me know.  Thank you.

  Straight from this follow-up to the letter...

  1. open Control Panel
  2. open 'display devices and printers '.
  3. right click on 'unknown device '.
  4. click on properties
  5. click on hardware
  6. click on properties
  7. click on change settings
  8. click on the driver
  9. click on set to update driver
  10. click on "Browse my computer for driver software".
  11. click on "Let Me pick from a list of drivers for devices on my computer.
  12 double-click on Microsoft common controllers
  13. click twice on "receiver wireless Xbox 360 for Windows Version: 2.1.0.1349 [2009-08-13].
  (or click on the latest version of the wireless receiver driver)
  14. click on Yes
  14. use the connection on the receiver and controller to connect and enjoy

• Windows Media Center extender on my XBOX works initially, but not after reboot of my XBOX. Error: Failed to connect to the Xbox 360 could not connect to the windows Media Center computer.

  It's VERY odd and very annoying!

  I set up my laptop next to my Xbox 360 with an Ethernet cable directly connecting the laptop to the XBOX, and the laptop is on our wireless network. The XBOX has access to the internet (shared through the laptop), and when I test the PC connection and the connection XBOX Live sound fine to all.

  So I'll try to set up Windows Media Center, it works great! I "Add Extender", put the code to 8 digits. It passes through the installation, all works, no problems and WMC opens on the XBOX, I can go into my library, watch movies etc... works great!

  However! As soon as I turn my XBOX off and back on, it will fail to connect to the WMC.

  He says his 'find Windows Media Center PC' which seems to work fine, it goes to the ' Windows Media Center loading screen "contact...". ", and after about 10 seconds, I get an error"failed to connect the Xbox 360 could not connect to windows Media Center PC. Make sure that the PC is turned on and connected to the network.

  I tried to configure the Extender repeatedly, whenever it works fine until I restart the XBOX... :/ - and its strange cause I still the internet connection (shared through the laptop) after turning on the XBOX, its really JUST Media Center which is screwing around.

  She continues to keep trying to connect then repeatedly fails.

  If I wanted to, I could re-configuration the WMC Extender EVERY TIME turn off the Xbox, which works the first time without fault, but that's all just stupid.

  I can't really understand what is happening here... any help would be appreciated.

  Hello

  Refer the article that could help you solve this problem.
  http://support.Microsoft.com/kb/932163

• Cannot connect with active domain Directory, because the local policy of this system does allow you to log on interactively.

  Cannot connect with active domain Directory, because the local policy of this system does allow you to log on interactively.

  You will need to create a new post on the TechNet forum for assistance in the field of related issues:
  http://social.technet.Microsoft.com/forums/en/category/w7itpro/

• cannot connect with sysadmin

  Hello.
  
  I'm sure that the password has not been changed, but suddenly users cannot connect with this responsibility.
  
  I'm tempted to change the sysadmin password and test, but it is not really an option that users should continue to use the original password.
  
  I checked the Apache logs that confirm that
  
  %3A8004%2Foa_servlets%2Foracle.apps.Fnd.SSO.AppsLogin & errCode = FND_APPL_LOGIN_FAILED & returned = US & username = SYSADMIN HTTP/1.1 "200 7331 0
  
  any advice much appreciated!
  
  DA

  Hi Dan,.
  Please check my last post.

  Cannot change password for existing users and new users [422501.1 ID]

  Thank you

• 1st generation Apple TV cannot connect with the apple ID

  Have 1st Generation apple TV and recently cannot connect with my apple ID.

  The reset several times and nothing.

  Help?

  You have activated 2 no authorization of your Apple ID? If so, disable the connection from a browser and temporarily, then connecting ATV, then reactivate. If not, please describe what is happening when you try to connect. What message do you have?

• How can I get my xbox 360 controller to work with my computer... Im running the 64-bit version of Vista... my computer does not even recognize the hardware?

  How can I get my xbox 360 controller to work with my computer?... I can't even recognize the hardware? Im running Vista 64 bit on a quad core rig any help would be appreciated... Thank you

  Hello Ghostdogaln.

  How do hang you the controller?  You must either use a * wired * controller, or use a wireless controller with receiver game Xbox 360 for Windows.

  If you use a wireless with a Play and Charge kit controller, it will not work as long as the USB cord only actually plug into the battery for the controller itself. Paul Smith - MVP for Windows desktop experience... I crawled off NNTP - for now. Detachment Aldershot, United Kingdom. On the internet at windowsresource.net and dasmirnov.net. Please post back to let us know what works and what does not. :-)

• Why cannot connect with DB after control DB console configure NetMgr/NetCA?

  People,
  
  Hello. I am running Oracle Database 11 GR 1 material in Oracle Linux 5.
  
  Before you configure Net Manager/Net CA, database https://localhost.localdomain:1158 control console / em, SQL * more and Developer SQL to connect to the Instance of database DB1. All instructions SQL runs correctly.
  
  After Configuration Manager Net/NetCA, all the tools of Admin above cannot connect to the Instance of database DB1 is the only case of DB.
  
  What I've done is added 2 headphones more in Net Manager.
  
  The original listener does not change which properties are: Protocol TCP/IP, Host localhost, Port 1521
  
  Can any folk tell me what causes all the administrative tools cannot connect with DB1 after configure NetManager/NetCA?

  user8860348 wrote:
  People,

  Hello. Thanks much for the reply.

  ORACLE_HOME/bin directory, the command. / sqlplus SYS/SYS used to run correctly after the installation of the database. But after stopping Linux operating system, the command. / SYS/SYS cannot connect with Dabase more sqlplus.

  I think that the command. / emctl start dbconsole should start to the top of the database. Am I wrong?

  NO, you're not correct.

  >

  Is there another way to start the database?

  sqlplus
  / as sysdba
  startup

  as shown below
  BCM@BCM-laptop: ~ $ sqlplus

  SQL * more: Production release 11.2.0.1.0 Sun Jul 17 20:05:09 2011

  Copyright (c) 1982, 2009, Oracle. All rights reserved.

  Enter the user name: / as sysdba
  Connect to an instance is idle.

  SQL > startup
  ORACLE instance started.

  Total System Global Area 1553305600 bytes
  Bytes of size 2213656 fixed
  1275070696 variable size bytes
  268435456 buffers of data bytes
  Redo buffers 7585792 bytes
  Mounted database.
  Open database.
  SQL >

• no error message Internet with linksys wrt54g2 v1 router

  Hello

  I connected my linksys wrt54g2 v1 connect to the LAN router and the WiFi worked perfectly well. Two days there was a problem with the connection to the local network and finally he solved. Now when I connect my router wireless to the LAN, the ssid is listed and when I connect to the WI - FI connection, see an error message saying "no internet access. Could someone help me solve this problem?

  Note: I have reset the router and changed the necessary configurations, but it still does not work.

  Thank you!

  Hi varun_umesh. It is obvious that the router is no longer communicates with the modem. Try to power cycle first two devices. Once the power supply light is good on the modem and the router, check again if the internet works on your devices. If not, these links will be able to help you to reconfigure the router.

  Setting up a Linksys router with DSL Internet service

  Setting up a Linksys router with cable Internet service

• I connected my xbox 360 to my laptop with the vga cable...

  I get the sound signal of a connected device, but nothing is on my screen. How can I fix it?
  It is a brand new in the package microsoft xbox 360 vga cable. Not a knockoff.
  Is my good enough laptop, the Toshiba netbook? Missing some necessary extra juice?

  Hi Surfszup,

  See the links below and check if it helps.

  The Xbox 360 console problems

   

  Troubleshooting your Xbox 360 Controller for Windows

  http://support.Microsoft.com/kb/908888

  When you use your console Xbox 360 with a Xbox 360 VGA HD cable, there is no audio data, or you see any video on your TV or monitor

  http://support.Microsoft.com/kb/907603

  Connect an XBOX 360 controller for Windows to a PC http://www.microsoft.com/nz/digitallife/gaming/how_to_connect_an_XBOX_360_controller_for_windows_to_a_computer.mspx

• Receiver wireless XBOX 360 will not connect to the controller with Windows XP 32-bit

  I bought the receiver the other day and tried it on my computer. I installed the stuff that came on the disc, no problem. I plugged the receiver and tried to turn on the controller and it simply not picking up the controllers. I tried on all 3 of the controllers that I own, but nothing helped. I looked the problem on google and all say to install the new drivers on the "unknown device", but that doesn't seem to be the issue.   My computer doesn't pick up the 'Xbox 360 wireless receiver for Windows' device no problem. But when I try to sync the receiver with the controllers I get nothing.  He also says that I have driver 2.1.0.1349 if that helps

  Hello

  You can download Xbox 360 Controller for Windows using the following link:

  http://www.Microsoft.com/hardware/en-us/d/Xbox-360-controller-for-Windows

  If the problem persists, I suggest you to contact Xbox support for help.

  http://support.Xbox.com/en-us/contact-us

  I hope that helps!

• I need help setting up my new Xbox 360 on my wireless connection.

  can anyone help w / my xbox wireless connection

  original title: new edition of xbox 360 Wireless

  Hi SeanLynch,

  You can consult the following articles and check.

  Wireless Xbox LIVE

  http://support.Xbox.com/en-us/Xbox-Live/connecting/wireless

   

  How to configure settings on your Xbox 360 Wireless

  http://support.Microsoft.com/kb/908877

   

  How to connect an Xbox 360 Wireless network adapter

  http://support.Microsoft.com/kb/907330

  Let us know if it helps.