Lists at several levels in the text indented

Similar Questions

• I'm working on a list at several levels, and when my list gets to the two figures on the third level, he pushes the first line of the text beyond the point of withdrawal.

  I played a bit with the indent and spacing in the paragraph without result style. How to get to the line upwards again after this point or just change the withdrawal of this it is so every game, no matter what number he?

  Use a withdrawal left, like 10 mm for iterated section, then set the indentation of first line to 10 mm. (or 15/15 etc., depending on how much you need. Enter a tab between the number and the text in the first line.

  If you use auto-numbering lists, then typing a tab is not necessary, but also take a look at the left indent and the parameters of the line first indent.

• Several Versions of the text in an InDesign file

  I have a large InDesign file and multiple copies on my computer, with only a small portion of different text on each copy.  Is there a way to easily different versions of the text in an InDesign file for the release of several PDF?

  Use conditional text. Window > Type & Tables > conditional text.

• How to make the text indented in Muse

  How to: make the text back in Muse, as a list with bullets

  Take a look at the thread next - http://forums.adobe.com/message/4896267.

  And the video here - http://tv.adobe.com/watch/muse-feature-tour/adobemuse-create-bullets-in-your-design/.

  Thank you

  Vinayak

• Enter several values in the text box, separated by commas and spaces

  Hello
  
  I have the following syntax as my request to report to the opening of user_names in the area of text separated by commas, but the user sometimes come with a space between commas, could someone please let me know
  How this can be controlled, both when the user uses the space or not use space as well as the comma recording several user names in the text box?
  

  select 
  *
  from   DW_RFA_JOBDATA
  where  FINISH_TIME >= :P1_START_DATE 
  and FINISH_TIME < :P1_END_DATE
       AND  instr(',' || :P1_USER || ',', ',' || USER_NAME || ',') > 0
   OR (USER_NAME = USER_NAME AND :P1_USER is null)

  Thank you

  Select
  *
  of DW_RFA_JOBDATA
  where FINISH_TIME > =: P1_START_DATE
  and FINISH_TIME<>
  AND instr ("," |) REPLACE (translate (: P1_USER, '! @# $% ^ & * () _-+= {[]}] |------:; ~ ',' '),' ', "). ',', ',' || USER_NAME | ',') > 0
  OR (USER_NAME = USER_NAME AND: P1_USER is null)

• BoolText.text how to give several channels (on the text and off text)

  How can I automatically change the text 'on' and 'Off' a Boolean value text. In the node property, I found BoolText.Text but how to use it to give power and text turn off? Thank you

  Hi TDE_CH,

  You can use the property '[4] Strings' to define these texts or you right-click on your control and use the Properties dialog box to change it.

  Mike

• How to write to several lines in the text element?

  I tried to write 2 lines in the text element, however only return one row:
  
  : myqueues.queue: = "Hello" | Chr (10) | ' world ';
  
  It gives me only 'Hello' in the first line and nothing else in the 2nd line.
  Are there settings needs to be activated in the property of text element?

  Try this:

  DECLARE
  v_filename VARCHAR(50);
  v_handle text_io.file_type;
  
  begin
  v_filename := get_file_name(file_filter=>'All files(*.*)|*.txt|');
  if
    v_filename is null
  then
    bell;
    return;
  end if;
  
  v_handle := text_io.fopen(v_filename, 'r');
  
  go_block ( 'myqueues' );
  clear_block;
  
  text_io.get_line(v_handle, :myqueues.queue );
  next_record;
  
  text_io.get_line(v_handle, :myqueues.queue );
  next_record;
  
  text_io.get_line(v_handle, :myqueues.queue );
  next_record;
  
  text_io.get_line(v_handle, :myqueues.queue );
  
  first_record;
  
  text_io.fclose(v_handle);
  
  exception when no_data_found then text_io.fclose(v_handle);
  
  end;
  

  Published by: Magoo on 02.10.2009 12:01

• In a numbered list, how can I italicize the text without the number in italics?

  Text is regular set in the style, but if I put in italics the first word of the list item, the number in italics, too, which is decidedly not cool.

  Thank you.

  ~ Valerie

  (CS6, Windows 8.1)

  Hi Valerie,

  Create a character style, do not set anything else than the regular style (or Semi, etc if you want the same style as the paragraph and numbering to match). Simply do not choose an italic style.

  Go to your style of paragraph, bullets & numbering section. Right underneath the number field, there is a character drop-down Style. Choose your Style of newly created character.

  You can now change your paragraph in italic style, or to highlight certain words and change them in italics, but the numbering will not italicized.

  

• Is is possible to make several updates with the text box

  How to enter an area and have it update several records in a field, I can do this with sql?
  Thank you
  Doug

  you want to update multiple fields in the same folder? If so, you could do something like:

  UPDATE emp
     SET comments = :P150_text
         extra_comments = :P150_text
   WHERE emp_id = :P150_emp_ID
  {code}
  
  this will set the comments and extra_comments fields both equal to the :P150_text apex item. you would put this into a procedure on your page.
  
  If you were updating the comments field for multiple records you would have to make a cursor for X records and loop through X records and make the comments := :P150_text
  
  good luck...
  
  Edited by: Tyson Jouglet on Sep 17, 2008 9:53 AM                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            
  

• During the rotation of captive text, why the text baselines evolve?

  In Illustrator CC, I have a group composed of several elements, including the text in the box. I flip this group 5 degrees using the transformation Panel (this seems to be a problem, either in a group or separate).

  As a result, the basic lines of text are more aligned. Take a look at the screenshot below. You will see the poor step in the 'e' to 'brand' (lines based on the n and d are above the "Bra"), and "pushed" where "n" is obviously higher than the rest of the word, and the 'a' aollaboration down below the rest, and many other words.

  If I unrotate it and then re-turns, different letters have basic problems. If I choose a different font, the same question. All the character settings are default. All paragraph settings are default. Area type options are two columns

  Am I missing something? Is there a better approach for this?

  

  caseyls,

  I think that maybe it's a strangeness of artifact/rendering screen.

  You see exactly the same zoom levels?

  It comes also with images PDF/print/exported/saved?

• Use values Pluging of notification in the text of the message (apex 4)

  I try to get something to work as in the example for the plugin, http://apex.oracle.com/pls/apex/f?p=654321:401:4379211328287332:, where you can see that when you make a change, it triggers the notification and knows the value of the list. But how do I get the value of the selected list item to enter in the text of the message? I have installed the plugin, created a dynamic action when an LOV changes and the notification appears and everything is fine, just I want my message to say "you have selected < current value of LOV >."

  Hi shoe,

  Take a look at the level of the text field of the help "text" attribute. It is said:

  The text inside the notification.

  The following placeholder is available:

  Syntax of Substitution on the server side: replaces a placeholder during the rendering of the page. Example: & P6_CATEGORY.
  The syntax of Substitution on the client side: replaces a placeholder with the current value of the browser. Example: #P6_CATEGORY #.

  Concerning
  Patrick
  -----------
  My Blog: http://www.inside-oracle-apex.com
  APEX 4.0 Plug-Ins: http://apex.oracle.com/plugins
  Twitter: http://www.twitter.com/patrickwolf

• What could go wrong with setting text-indent:-9000ems;?

  I always value text-indent:-9000ems; whenever I want to hide the text for on-screen presentations and display text for screen readers or any other type of media.

  The way I've always done it is by setting the text-indent:-9000ems.

  Everything has gone well so far. Rrecently, copy the following code displays unexpected occurs when discovered with live on presentation design:

  

  But now, if I use pixels, the problem goes away:

  

  What could happen?

  Why this change in behavior of Dreamweaver?

  Thanks in advance,

  Rafael

  The problem based on the Dreamweaver design view, which does not support many aspects of CSS. Judging by your screenshots, you use Dreamweaver CS6 or earlier. I don't have Dreamweaver CS6 installed, but using - 9000em in the latest version of Dreamweaver CC works in Design mode and Live mode. There have been no improvements in Design view for a long time, so I suspect that the problem is probably also your styles.

  The bottom line, however, is this: never rely on the mode of creation, regardless of whatever the version of Dreamweaver that you use.

• Question on the text box

  Hello.

  I need to be able to make a text box that will allow people to know what kind of information to fill out, example:

  I, __________(name of Patient)understand the services rendered to me.

  If basically just now, I have a text box on underscore, however it comes out like this:

  I, _ understand the services rendered to me.

  Is it possible to make a text box that will also show you what kind of information the person must complete?

  And once he auto erase the text indents so the person can fill their info?

  I use Adobe Acrobat Pro 10.1.4

  Of course, you can use a custom Format script for the field, which is something like:

  Custom Format script

  If (! event.value) event.value = "your default text goes here.";

  The string that you specify here will be displayed when the field is empty and the text that is entered in the field otherwise. When the field is selected, the text will disappear.

• ATTRPARENT dimension of the text attribute to several levels of construction with a rules file

  Hello

  My first post here.

  I'm trying to create the dimension generation rule to create a dimension of the multilevel text attribute and then combine with the basic dimension.

  So far, it is difficult.

  With regard to my experience:

  -J' have a relatively basic understanding of the rules of charge both with regard to the data loads and define the updates - I find this quite confusing area and the documentation does not help that much

  -J' only started using dimensions attribute, so for me it's a new concept, but we are already quite useful in certain applications

  -J' I try to automate the process of construction of dimension attribute, and then associating attributes with the basic dimension

  I use the following documentation as a guide:

  Building size attribute and associate attributes

  http://docs.Oracle.com/CD/E12825_01/EPM.111/esb_dbag/frameset.htm?dotdimb.htm

  and / or

  Work with the attribute multi-level Dimensions

  http://docs.Oracle.com/CD/E26232_01/doc.11122/esb_dbag/frameset.htm?ch21s06s05.html

  (essentially the same source in both cases)

  The ultimate goal is to replicate one of our existing recently created attribute dimensions of a cube to another.

  I built a few versions of the required flat file and the corresponding rules file, but none worked.

  I tend to get the following validation error message:

  This field is defined as an ATTRPARENT. The following column must be a field of association attribute type.

  As I got stuck so I gave to the current actual attributes and moved on to experimenting with the sample / base cube.

  I built a flat file that is supposed to create a new dimension of text attribute named ABC with two attributes level structure:

  ABC

  A

  AA

  AB

  B

  BA

  BB

  and associate it with the dimension of the product in the following way

  200-10 AA

  200-20 AB

  200-30 BA

  200-40 BB

  The flat file looks like this:

  "AA"      "A"         "200-10"               "A"         "AA"      "200"

  "AB"      "A"         "200-20"               "A"         "AB"      "200"

  "AB"      "B"         "200-30"               "B"         "AB"      "200"

  "BB"       "B"         "200-40"               "B"         "BB"       "200"

  and the rule file has 6 matching columns with titles as follows:

  Level0, LEVEL1 ABC, ABC Level0, product ATTRPARENT0, ABC ABC0, LEVEL1 product, product

  all agree with what the documentation says.

  The first 2 columns are intended to define and create the dimension of the attribute, while the 4 next make association...

  I couldn't the above rules file to validate.

  The same validation error message appeared as previously:

  This field is defined as an ATTRPARENT. The following column must be a field of association attribute type.

  However when I tried to actually update the outline of the mistakes of dimbuild.err file has been created which gives some additional clues:

  \\ATTRPARENT column 4 must precede a numeric or datetime column attribute association

  Now... Finally the interesting part...

  Back to the documentation...
  

  I don't mind if the size of the attribute is generated and then those associated with step or in two separate steps.

  I try to do both tasks in one step only because that's what the documentation seems to suggest attributes at several levels.

  First of all I read:

  Note:

  If you work with a multilevel dimension attribute or with a dimension of the attribute of the digital type, Boolean, or date, the rules file requires an additional field. See working with Dimensions of the multilevel attribute.

  Yes, I work with a dimension of the multilevel attribute so the above statement applies (I guess) and so I'm going to see what works with several levels attribute Dimensions has to say.

  Then, I read:

  When an attribute is part of a digital multi-level, Boolean, or dimension attribute date, the source data must include columns for all generations or the size of the attribute levels.

  Fair enough... so I do what they say... my attribute dimension is at several levels, so I can assume that the statement above applies...

  So, I build my rule in accordance with the guidelines above.

  And then, as we have already mentioned, I get the error message about ATTRPARENT and when I read, it turns out that ATTRBPAREN cannot be used for numeric or date attribute dimensions !

  I'm totally confused at this point.

  What about the attribute text multi-level dimensions ?

  They are several levels but they are NOT numeric or date those!

  The documentation does not seem to tell what to do in this case...

  Anyone build something like that?

  What is the thing that I'm missing?

  What about

  I'm glad that you got to work. I tested and that is to create the dimension attribute and associate it with the rule of the load.

  You could ignore the construction size manually. Remove the attribute dimension. The rule1 go for the Dimension settings under the definition of Dimension tab. Then right-click on the product and change the properties. On the attribute tab, add 'Test' or whatever you want to call the attribute, and assign the text type. He adds the attribute and associate it with the basic dimension when it create the hierarchy. Note that the rules could actually be reversed where you create members of level 0 and then more later to create the hierarchy.  Of course you must pass the size of the attribute association to the other rule

• List several boxes of selections in the text area

  Hey all, I got a very helpful response last time, but now I want to put several list boxes selections in a box.  * Line * Help!

  Here is a script to custom calculation, you can use for the text field. I guess it's multiline and you want each element of list on a separate line box:

  Custom calculation script

  (function () {}

  Get field values

  var v1 = getField("lb1").value;

  var v2 = getField("lb2").value;

  var v3 = getField("lb3").value;

  Initialize the array

  var a1 = [];

  Add the list box values in table

  A1 = a1.concat (v1);

  A1 = a1.concat (v2);

  A1 = a1.concat (v3);

  Convert the table to a string, separating the values with a carriage return

  and set the value of this field

  Event.Value = a1.join ("\r");

  })();

  I coded this for more clarity, so you can be able to do so more effectively. Any decent JavaScript reference will have more information on the methods of array concat and join.