Several Versions of the text in an InDesign file

Similar Questions

• ORDS_METADATA & several versions of the listener

  Can someone explain the requirement of ORDS_METADATA (also in the doco that is)?

  The doco indicates that the user ORDS_METADATA is necessary. Which is seems to be, as evidenced by the autonomous ADR does not if the ORDS_METADATA schema does not exist.

  I have 4 separate facilities of ords.3.0.0.65.09.31 on a server pointing to a particular database, and yet another server with a different ords.3.0.0.65.09.31 install pointing to the same database. All very well as standalones (restless) work.

  On this database, select * from ords_metadata.ords_version; Returns a line, 3.0.0.343.08.03.

  How to upgrade the version of ADR? I drop the ords_metadata schema and then allow the installation process to recreate? Assuming that the new version of the installation actually it creates in the 3.0.0.65.09.31 form (which he does not seem to do).

  I think that it is possible to have several versions of ADR connections at the same base. Here, that I think that the ords_schemas table to have several lines, one for each instance of ADR that is running on this database. Or it doesn't matter? Am not in trouble because I'm not avoiding the side REST of things?

  If we have more than one listener to ADR set up pointing to the same database, each has its own pattern of 'ords_metadata '?

  We would have more than one listener to ADR set up pointing to the same database? (With the same ORDS_METADATA?)

  see you soon

  TeeDub

  ORDS_METADATA is used to store the definition of the RESTful Services exposed by ADR, whether it's Modules of resources or of REST on tables or views.

  The headings of table ORDS_SCHEMA which database in the database schemas have been enabled to expose a RESTful Services. So, if you enable the schema scott for ADR then a line will appear in ORDS_SCHEMAS for the scott schema.

  If you are not using RESTful Services (for example you are using only the PL/SQL gateway) so you don't have the ORDS_METADATA schema in the database at all, but the ADR Installer always install the ORDS_METADATA schema, allowing the RESTful Services being goal ADR. RESTful services offer a richer, more flexible way to access the database on the Web that does the PL/SQL gateway.

  You can not install several versions of the ORDS_METADATA schema in a single database. If you do not use the RESTful Services you won't see all the problems with the connection of several different versions of ADR to the same database, because the ORDS_METADATA is never as reference when executing queries from the PL/SQL gateway. However if you use the RESTful Services then you would encounter problems in the future as and when future versions of ADR are released and which depend on the ORDS_METADATA schema changes.

• When exporting photos, lightroom saves several versions of the image on my destination folder

  Hello

  I've been using lightroom for editing my pictures for about a year now.  First, I noticed the problem a few months ago, but did not bother to seek a solution so far.  Whenever I finish photo editing, I export it to my destination folder.  My problem is that when I go in the destination folder, I see several versions of the photo, even if I only export (save) once when I am fully satisfied with the modified final image.  For example, I'll see img_2222, img_2222-2, img_2222-3 and so on, sometimes up to 10 versions.  I also noticed that the images are a little different with the final image is the image with the largest number suffix (for example, img_2222-10).  I hope I am making sense here...

  As you can imagine, it's frustrating, because I end up spending an absurd amount of time to delete the versions that I don't need.  Is there any solution for this?  I searched all the settings and don't see even an option where I can record all the steps of my editing process images...

  Help!

  Hi cindymaya,

  Could you please share the version of Lightroom that you use?

  Could you please share the Lightroom export settings by using a screenshot?

  When you export an image, Lightroom displays the top progress bar left referring to the number of images that are exported.

  This progress bar says exporting a photo when exporting?

  suggest you try to export to a new empty folder, and then check if it exports several versions.

  Kind regards

  Claes

• can you have a version of CS and several version of the software installed for example Lightroom CC both?

  can you have a version of CS and several version of the software installed for example Lightroom CC both?

  Yes, you can have multiple versions installed.

  Please see this link:

  Download previous versions of Adobe Creative applications-

  Download previous versions of Cloud Creative applications

  You can have both CC and CS6 installed through creative cloud. You can also leave the old purchased software installed.

• Several versions of the bridge (CC and CS) will share a single cache?

  You may be wondering why I'm running several versions of the bridge - but aren't. As the new versions of bridge and PS are multiplying like rabbits, I don't want to discount cache of tens of thousands of photos.

  Move on to the General bridge Discussion

• Lists at several levels in the text indented

  Hello everyone,

  I use RoboHelp HTML 11 and I have a question about the use of the lists at several levels in the text indented.

  The main text in my headings is indented by 122.7px in order to leave enough space for text boxes that summarize parts of the body of the text in the left margin.

  Now, I want to create a multilevel list style so that I can use these lists in the main text indented. Therefore, I created a "List_Style" paragraph style, which includes the indentation of the main text (122.7px). Then, I created a new multilevel list style, in which each list level is based on the paragraph style "List_Style". In my understanding adopt the indentation of the "List_Style" style, but unfortunately it doesn't. Can someone please tell me why and what I need to do to make this work?

  Best,

  Mr. Fox

  PS: My output will be Responsive HTML5 Layout and printed Documentation and I created all the styles that I use in RoboHelp.

  It is not a setting in HR or a word that will fix it. Word lists are a law unto themselves.

  You can map a multilevel list HR to a word list style. Maybe if you set up a list of words and mapped to that you will get a better result. You must create a multilevel list in a Word template and map that.

  See www.grainge.org for creating tips and RoboHelp

  

  @petergrainge

• How can I copy parts of the text of a pdf file in preview?

  How can I copy parts of the text of a pdf file in preview? For example, the beginning and the end part of a passage - copy not a few sentences in the Middle

  Select the first part of the text you want to copy. Press the command and option together and also select another passage of text. Now, press command + C to copy the two text selections.

  Hypothesis: The PDF did not limit content selection.

• try to change the text in a saved file, but it will not allow isolate me the text, place the cursor in the text box or simply go back to remove.

  try to change the text in a saved file, but it will not allow isolate me the text, place the cursor in the text box or simply go back to remove.

  Hello

  in what format save you your file? If it's a jpg file, then the text is compressed and unfortunately PS is telling things as they are. Even if you could change the text before you save, after having been saved in jpg format, the text is merged and is no longer editable.

  A good solution is to save the files as PSD files, photoshop files. In this case, all layers are saved uncompressed and so your text will appear in its own layer in photoshop. All you need to do in this case to change it is the result of a three-step procedure

  (1) select the right layer

  (2) take the text tool in the tools bar

  (3) mark and change your text

  So the crucial question is: in what format you save your file?

• Several versions of the same project AE Premiere Pro crash

  Hello!

  I guess this should be possible, but it seems that I do something wrong.

  I am a first Pro CS5.5 project. This is a tutorial how-not - to the that I use as an example of project to get myself started in CS5.5 AE with the body.

  Now... between the clips I want to first pro to show screens as "Lesson 1: when you don't...' then a video clip, then ' lesson 2: when you... don't ', then another clip video example." Etc...

  However, it would be nice if these screens of text between the two were animated. So I am doing a project in AE called "Lesson1", save it, just to make the text lively between the two.

  Import of the body: nice.

  Now, I would like to make the animation 'lesson 2'. I want he comes alive as in Lesson 1. So I have open project Lesson1, change the text and save it as AE project "Lesson 2. In this way, I don't do any what animation again.

  This would be the way simple, right? Instead of having to copy everything or instead of save settings predefined.

  
  It does not work.

  For some reason any body (even if AE is saved and AE is closed) now words together projects. Lesson1 indicates Lesson2 or Lesson3. It seems that AE projects are registered under different names, organization always check the versions published as an edited version or the original, with the exception of the version I want to show him.

  At some point, this will crash body or AE.

  I'll start trying to make different compositions in the same project, maybe that will work. However, why it works that way?

  Thank you

  Your workflow is a bit wonky. Here's the right way to use the AE projects within a timeline of the Organization:

  1. Select the clips you want to process in After Effects
  2. Right-click on any of the selected clips and select replace with After Effects Composition
  3. AE opens, save the project file, and then change the composition created with Dynamic Link.
  4. Do not close AE.
  5. Repeat for as many clips you need to treat in AE.

  It is always better to end up with an AE project incorporated into a chronology that integrated a lot of AE projects. I guess the crash is a dynamic link is trying to access several projects at the same time. Dynamic links can handle a handful of compositions far better that he can manage a handful of projects in the same timeline.

• How to pass the content of an xml element in the text frame in inDesign Script

  var XMLFile = File.openDialog ("select XML Files... ») ;

  var doc = app.activeDocument;

  If (!) App.Documents.Length)

  {alert ("ERROR: Document not opened");}

  return;

  }

  doc.importXML (XMLFile);

  var firstFigureNode = doc.xmlElements [0] .xmlElements [1] .xmlElements [0];

  var lableNode = firstFigureNode.xmlElements [0];

  var lableNodeText = lableNode.contents;

  myFrame var = doc.textFrames.add ({geometricBounds: [-13, 13, 3, -3]});

  lableNodeText.move (LocationOptions.AFTER, myFrame.texts [0]);

  ========================================================

  My requirement is: == > > move the content of an xml element in the text by inDesign Script block, but XML InDesign file Structure should not be change & data in the XML Structure should remain as it was before...

  I tried to code above, but it does not work...

  Please can someone help me in solving this problem...

  It does not work correctly...

  It moves firstFigureNode in myFrame...

  firstFigureNode.placeXML (myFrame);

  ===>> For Apple Script try below Code ===>>

  myFrame markup using firstFigureNode

• Paste the text formatted in inDesign

  Hi all

  I'm trying unsuccessfully to paste text formatted in InDesign CC (2015)

  I tried the following:

  Preferences ()Clipboard handling > option button for pasting of formatted text) in InDesign are defined to manage information. No chance!

  I tried with different formats, .rtf, .doc, etc., using the show import options when placing the text. No luck.

  Can someone guide me in the right direction?

  Best/Jonas

  Sorry about the URL, try this: http://www.lynda.com/InDesign-tutorials/Using-Word-InDesign-Together/122930-2.html

  You can map Word styles to Indesign Styles.

  Derek

• Enter several values in the text box, separated by commas and spaces

  Hello
  
  I have the following syntax as my request to report to the opening of user_names in the area of text separated by commas, but the user sometimes come with a space between commas, could someone please let me know
  How this can be controlled, both when the user uses the space or not use space as well as the comma recording several user names in the text box?
  

  select 
  *
  from   DW_RFA_JOBDATA
  where  FINISH_TIME >= :P1_START_DATE 
  and FINISH_TIME < :P1_END_DATE
       AND  instr(',' || :P1_USER || ',', ',' || USER_NAME || ',') > 0
   OR (USER_NAME = USER_NAME AND :P1_USER is null)

  Thank you

  Select
  *
  of DW_RFA_JOBDATA
  where FINISH_TIME > =: P1_START_DATE
  and FINISH_TIME<>
  AND instr ("," |) REPLACE (translate (: P1_USER, '! @# $% ^ & * () _-+= {[]}] |------:; ~ ',' '),' ', "). ',', ',' || USER_NAME | ',') > 0
  OR (USER_NAME = USER_NAME AND: P1_USER is null)

• several versions of the Variables shared on the same network

  I have 2 separate reactors working on the same network each variable deployment shared ~ 50 (different names on each process) contacting LV 8.5RT running on hardware of the FP.  One of the reactors is asked for new features and upgrade.  It is possible the Heve 2 different shared variable engine (8.5 and 2010) and the versions on the same network, and the client computer, or I'm in trouble.

  Oh boy I think you ask in trouble here!

• BoolText.text how to give several channels (on the text and off text)

  How can I automatically change the text 'on' and 'Off' a Boolean value text. In the node property, I found BoolText.Text but how to use it to give power and text turn off? Thank you

  Hi TDE_CH,

  You can use the property '[4] Strings' to define these texts or you right-click on your control and use the Properties dialog box to change it.

  Mike

• Eclipse plug-in: generated files .alx file contains several versions of the OS.

  I'm using Eclipse 3.5 with BlackBerry Plugin 1.1.2.  My BlackBerry runtime environment is set to 4.2.1.  I put in my Application descriptor to generate a files .alx file.  When I package for the project, a files .alx file to be generated, but it contains sets of files for version 4.2.1 and 4.7.0:

                 PWMinder                     PWMinder Password Manager, used to store and manage you passwords.                        1.0.5                      Ewert Technologies                           Copyright (c) 2010 Ewert Technologies                                         4.2.1                                     PWMinder.cod
  
              
  
                                        4.7.0                                     PWMinder.cod
  
              
  
        
  
      
  
  
  

  I don't know why it includes 4.7.0; under the /standard directory, it only generates the .cod and other files for 4.2.1 (No 4.7.0 directory is created).   Awhile back, I've changed the runtime environment for 4.7.0, but since I turned it to 4.2.1 I assumed the .alx files is only information for 4.2.1.  He in some way remember that I used 4.7.0 in the past?

  Then this .alx files seems to be a problem when I try to use Desktop Manager to load the application on my device; Desktop Manager says: "no additional applications can be found.  Your file may have existing applications in the list of applications, or is not compatible for your device, or errors.

  The camera I use is: BlackBerry Curve 8330 v4.5.0.127 (Platform 3.4.0.20)

  Running on the simulators seem to work very well.  I was able to get a previous version of my application to load on my device.

  Any thoughts?

  I had a little trouble with that at first on the new plugin but once I got the ALX options appear outside he life much more easily.  Where I thought I'd use groups and such on the BES that users that you have the right version (or no version at all), I now use the ALX.

  Having said that the necessary ALX manual change unless I was building accurate versions of the operating system, which I never do.  Basically, the ALX seems to have trouble with the concept of "install on all devices with version x and more.  There may be a way to set up in Eclipse, but it's not immediately obvious and the manual fix was easy.

  In your case, you can remove the entire section associated with 4.7 but your real problem is that tags say that the app is only for devices > = 4.2.1 and<4.2.2(exlusive).  edit="" the="" 4.2="" section="" to="" look="" like="" the="" below="" which="" is="" basically="" that="" the="" app="" is="" to="" run="" on="" 4.2.1="" and="" all="" versions="">
  

  Don't forget to deploy your BES with the same file structure listed in the ALX, otherwise you will also change the directory tag indicating the location of the Cod.