Load and save color chart in Muse

Similar Questions

• Load and save data of the façade settings

  Can someone give me some examples of VI that ables user so save his choice front face? And tell me if it is possible to save values and strings of all the fields that have been filled by the user. I want to implent a settings 'LOAD' and 'SAVE', and I want these parameters can be read out of LabView, to facilitate the intereaction of the user.

  It would be wonderful if someone can support me in this.

  Thank you very much

  AMT

  Hello

  I have attached a very quick example and dirty.  But you should get the idea of how do

  Craig

• Enter and save color gradient

  Hello

  I need to know how to enter and save the Gradient "darker" color in the color chart so that it can be used as a solid color and applies to the object on the right. Please refer to my screen for a better understanding. Thanks in advance.

  

  Place your cursor on the Gradient slider and you will see a + appears, click on and add a slider where you can take only the color in the same way as the previous answer.

  

• load and save a cluster

  I have a group of data that shows the tests failed.  At the beginning of the primary VI, I want to check if the file exists, otherwise create it, and if so, read it.  This file is going to be my cluster saved, indicating the tests that failed previously.

  I use datalog open/create/replace and will have a problem with the elements of the cluster always becomes zero.

  I also try to save the cluster in the file whenever a test fails.  This does not work either.

  Is datalog sub screw the the easiest thing to use here?  Can I use anything other than a cluster?

  Thank you

  In your backup vi, you must set the input operation to open/create/replace "replace or create.  The first time you write, the datalog is created and the data will be written.

  After setting the operation to create your vi Save, I was able to run it and it created a file datalog.  So I ran the vi with an entry error load so that he says historical data.  The data corresponding to what I wrote.  There is no problem with the functions of datalog.

  But there is a problem with your logic.  Why do you call an error if file exists?  When loading, you hope that the folder exists.  If your error cases are backward.  If the folder does not exist, why do you write zeros for the datalog?  Also, when writing new data to the datalog, you must define the operation to replace or nothing will happen and the new data will not be saved.

• A lot of time to load and save

  I upgraded to first Pro CS5 a month ago and have had excellent results with several small projects.  But now, I'm working on a larger project (45 minutes) and the project takes a long time to load - 10 to 15 minutes - and even more to save - up to an hour.  Today, when registering, I received warning of insufficient memory in windows.  I changed optimize memory in edit - preference to 'memory' effect.  Here are some statements

  System

  Intel Core I5 650

  RAM 8 GB - 6.5 concert dedicated to Pr

  2 - discs hard 1 terabyte

  GForce GTX470 graphics card

  Windows 7 Home Premium

  computer dedicated to Premiere Pro

  Project

  For most of the HDV video

  Some DV videos

  ambient sound track

  narration track

  piece of music

  a few still images

  several titles

  Any help would be appreciated.  This is my first post on this forum.  I'm in the right place for this question?

  Thank you

  Don

  You have upgraded to 5.0.3? This sounds like the problem of bloating infamous project which was sent in 5.0.2 (or 5.0.3; can't remember).

  Go to help > about to check your current version (you want to see 5.0.3) and if not, go to help > updates and let all relevant updates be downloaded and installed. It is usually better to do after a fresh reboot of your system; run the Updater of the bridge can sometimes help prevent the bug "back to the trial" which is another fun thing if all goes well, you become aware of

• PDF form - load and save from/to XML

  Hello

  I am looking for a solution fill and read the value of the fields of a PDF form. I work with Microsoft Framework 2.0 and c# for a desktop application.

  At the moment I use a FDF file to fill the fields PDF and iTextSharp to collated fields values once the PDF file is saved. But it does not work with some PDF that are bind to an XML data source. The idea is to drop the FDF solution and try to use XML instead.

  So, I have a PDF form (myPdf.pdf) with fields bound to a source of XML (XSD schema file myPdf.xsd).

  I have a data XML (myPdf.xml) file in the same directory as the PDF file.

  With LiveCycle and JavaScript is it possible to:

  • Load the XML data file and fill out PDF when I open the PDF file?
  • Export the value of the fields in the XML file when you close or save the PDF file?

  If not possible with LiveCycle and JavaScript, you know another solution?

  I thought to put a button "Send by HTTP" and use a listener on localhost to get the data, but I need to listen on a particular port and it is unlikely that this port is already used by something else. I'm really not lucky in this case, but it could happen. And from the port are "hardcoded" in the PDF file I have no way to change it if necessary. Or I have not found how.

  Thanks for your replies

  Yes, you can start the xml (as the FDF) file and it will load th eform as well. To see what you need to do... .put a button on your form, and add the code:

  xfa.host.exportData)

  for the click event. Now make your form, fill it out and click on the button. It will ask for a file name (it will also be an extension of the XDP on the file). This is the file of XML (called as an xdp file). Open in editor xml and you will see at the bottom the reference to the model. Now if you run the xdp file it will open Acrobat and launch your form and merge the data into the form. Note that if the designer has been installed after Acrobat, then the XDP extension is on the designer (he thinks it is a native template file) and you will get an error. Make sure the xdp extension is registered in Acrobat.

  For the record, you can programmatically click the button submit whether it is visible or not.

  Paul

• Load and save predefined parameters

  Hello

  I'm building a PS extension which has a graphical interface with several sliders, steppers, digital, etc.. I put a ComboBox (sort of a "presets Picker"), which affects all elements of graphical interface at a time. All these values will be then be passed to a script of PS. My goal would be to implement a system of 'save new preset' - so I have to find a way to retrieve and store somewhere all the key/value pairs (they can be up to 10), giving them a unique name – one that will appear in the ComboBox and more pre-defined default parameters that are built in.

  Instead of a collection of ArrayCollection, I used an XML (via XMLList, XMLListCollection and HTTPService) to fill the ComboBox control and store all my presets to 5 by default - it is not clear to me how to put the new that users may want to save.

  Perhaps a system like the one shown in the MakeSideHeads, using preferences CSXS? At first view, to me it doesn't look like the right way, but chances are that I'm wrong.

  Any suggestion?

  Thanks in advance,

  Davide

  Here is the code of the ComboBox:

  Close = "closeComboPreset ()" dataProvider =""

  {PresetLabelList} "/ >

  Now you have all this. It has been tested so far in version CS4 the Panel and the CS5 beta tests.

  Happy holidays!

  Mitch

• the color chart "load" command does not in InDesign 2014 and 2015

  The "load the color chart" command in the Panel color chart does not in InDesign 2014 and 2015. Cannot click the Pantone or any other collection, they are all faded.  I have already trashed the Preferences folder and restarted ID and Mac. It started only once I have updated to the latest version of CC, but now it affects 2014 and 2015.  Don't know what to do, I don't like reinstalling one or the other.  Tried to go back to the CS6.  All solutions anyone?  Thank you!

  

  Color chart of load control is for loading samples from other documents or a swatch file.

  Use the new swatch command to add a color.

• I downloaded InDesign and cannot load the color chart - they are greyed out.

  I've now loaded and uninstalled ID CC twice.

  I also reset my prefs in the cloud.

  The color chart is grey and when I go to load, it goes into a doc file and not the Adobe application folder. Photos below.

  

  Please do not hesitate to send me an email and or call [personal information deleted by Moderator]. I'll be outside a lot today but it will end in a different program.

  O

  I think you misunderstand load swatches command.

  .Acb files that appear dimmed are books of color and they are already installed. Instead of load swatches, use new shade of color, you can choose a book of color in the color Mode menu:

  

  Color chart of charge is used to load a set of shades from a .ase file saved from an Adobe application or other document of identity.

• Suggestions to save commonly used color charts

  I could save a lot of time if I had an easy way to load and update a range of shade for Premiere Pro.  Because the color picker does not include an option for the recently used colors, constantly, I type in the numeric values for customer color schemes and useful colors.  Am I missing something here?

  PP CC 2015.2

  Mac OS 10.11.4

  Don't know if there is a way to generate the nuances in the first (although I guess you could make a screenshot and download that), what I do is to load the color chart at the Ps library or have

  

  and then to use these samples as samples of color for the first color picker

  

  MtD

• InDesign CC 2014 doesn't load saved color chart

  I have some problems with my library of nuances in InDesign. I put a few groups of color with shades in them to load as default and it works very well when creating new documents, however they don't load in previously saved documents and appear not at all.

  I erased the preferences and that did not work ideas either, what it takes to try? I just stay persistent in my library of shades for all documents (the same as the default swatches make for the moment).

  By default the shades don't load already created documents.  If they did, if would be difficult to keep clean Swatch palette. all the colors I didn't need and had deleted would come every time I re-opened.

  You will need to use Load color chart, then choose a document containing the new color chart to import them.

• Color chart of model move when exported to PDF and read in Preview/GoodReader

  I tried for days find an answer to this issue, but have failed. You should also know that I am a self-taught user Adobe Creative Suite. I'm working on a Mac with CS6.

  I work for a small publisher that produces knitting books. The problem is this: our tech editor has created graphics in Illustrator using the color chart of model function. (These are graphic knit. Each square contains a shade of motif representing the knit stitch).

  I then place these cards in their format native .ai in an Indesign file and exporting to PDF. In Acrobat, the charts look fabulous. In the drive of the preview Mac and GoodReader, tables do this...

  

  ... the model color chart move around inside their places. Each of these points must be placed inside their places. First, when I resize the application framework, the nuances of the model move I have re-size of the frame. Any ideas on what could happen here?

  I tried to save the graphics as PDF files and putting those in the InDesign file. Does not help. Export diagrams as images (jpg or tif) works, but I need to make ridiculously high resolution/size for the quality of the vector image. I would rather put .ai files in the .indd file if possible.

  Try to use the file > object > expand on a copy of the original before making the PDF for placement.

• How to access the tab 'Save all' when I close several jpeg files that have been adjusted with the "color adjust tool? He is currently making me close and save one at a time. Thanks for any help :)

  How to access the tab 'Save all' when I close several jpeg files that have been adjusted with the "color adjust tool? He is currently making me close and save one at a time.  I've just upgraded to El Capitan.  Thanks for any help :)

  I assume that you use the application overview.

  I can't find an answer to back up everything, but a workaround could be while the file menu options are visible, press the option key

  and the point of the window will become close, if you click on that dialogue will ask you if you want to restore the changes or save

  pressing Save will close the image with the changes and then move to the next image and so on.

• Key shortcut (or batch) Image-> Auto color - and - save in the same format

  I scanned a lot of old photos in color, positive.

  FWIW, I scanned the sRGB in the scanner software settings.

  24-bit color, 600 dpi resolution

  Images are not professional, just for screen viewing.

  Probably not, but if... or even not at all printing is required, it will be 4 "x 6" (10x15cm)

  The scanned images are somewhere between 5-6MB (still intact)

  Almost all have this yellow and even slightly red color change.

  Found the Image-> Auto color restores the color well.

  Nothing more useless.

  For now, I need to

  1. open one by one,

  2 then image-> Lee,

  3. save,

  4. Select JPG (it is set by default to .psd).

  5 crush the source.

  Q: is it possible by using a keyboard shortcut?
  If so, how can I proceed?

  (I'm not an expert on this topic, sorry)

  Don't talk about 375 to 400 images.

  Photoshop CS6.

  First of all, I will copy them all to a new '-working folder ", to keep the original scan yet.

  Then:

  Open - say - a half dozen

  Select 1,

  shortcut key

  Select the 2nd

  shortcut key

  Select the 3rd

  etc.

  (I want to see the results before closing)

  Thank you!

  =

  Are the original scan JPEG files?

  The files must be of the same file format to crush.

  Anyway, you can record an action with a stop/continue after the step of automatic color.

  Then use file > batch automate to open, run the action and save the files.

  Something like below:

  Action:

  

  Lot:

  

• How to load an XML file and save it as a file fm

  Hi Experts,

  I have a bunch of XML files in a folder. I want to make is that I want iteratively, load the xml using a StructuredApplication and save it as a file FM. I was able to sucessfully load the XML file, but I'm having trouble to save a file of FM.

  Here is the code I wrote so far:

  If (sourceFolder! = null) {/ / If a valid file is selected}

  files = new Array();

  fileType = "*.xml";

  files = sourceFolder.getFiles (fileType);  Download all the files that match the pattern

  If (files.length > 0) {/ / get the destination to save the files}

  destFolder = Folder.selectDialog ('Select the folder where you want to save the converted XML files.', ' ~');

  for (var i = 0; i < files.length; i ++) {}

  Set the options to open the XML file.

  var openParams = GetOpenDefaultParams();

  var j = GetPropIndex (openParams, Constants.FS_OpenAsType);

  . propVal.ival openParams [j] = Constants.FV_TYPE_XML;

  j = GetPropIndex (openParams, Constants.FS_StructuredOpenApplication);

  . propVal.sval openParams [j] = "XML Snpsbook";

  j = GetPropIndex (openParams, Constants.FS_FileIsOldVersion);

  . propVal.ival openParams [j] = Constants.FV_DoOK;

  j = GetPropIndex (openParams, Constants.FS_FontNotFoundInDoc);

  . propVal.ival openParams [j] = Constants.FV_DoOK;

  j = GetPropIndex (openParams, Constants.FS_FileIsInUse);

  . propVal.ival openParams [j] = Constants.FV_DoCancel;

  j = GetPropIndex (openParams, Constants.FS_AlertUserAboutFailure);

  . propVal.ival openParams [j] = Constants.FV_DoCancel;

  var returnParams = new PropVals();

  I'M NOT ABLE TO GET THIS LINE TO RUN. sourceDoc RETURNS a REFERENCE of OBJECT INVALID.

  sourceDoc = Open (files [i] .name, openParams, returnParams);  Returns the document object

  Alert (SourceDoc.Name);

  Function to save. XML file. Extension of the FM

  var saveParams = GetSaveDefaultParams();

  var returnParamsp = new PropVals();

  Change the extension .xml FM

  var k = GetPropIndex (saveParams, Constants.FS_FileType);

  saveParams [k].propVal.ival = Constants.FV_SaveFmtBinary;

  saveAsName = sourceDoc.name.replace (/ \.) [ ^\.\\]+$/,".fm");

  var saveInFile = record (saveAsName, saveParams, returnParamsp);  Save as file FM

  saveInFile = new file (destFolder + ' / ' + targetFile);

  saveInFile.close ();  Close file

  }

  Alert ("the files are saved in the FM to ' + destFolder");

  } else {}

  Alert ('no matching files found!');

  }

  }

  Hi reda,.

  You are very close, but there are a few critical flaws in your code that will prevent the proper functioning:

  -Your paths in string literals must have sequences to escape the backslashes. A backslash character is treated as an adverb in an escape sequence, so those need to be escaped themselves. For example: "C:\\Users\\rajrev\\file.xml."

  -Your OpenXMLFile () function does not return anything, then the original DocumentSource variable never gets made.

  -It is better to use the ObjectValid() method to test a valid object of FM.

  -I am not an expert of regular expression, but I can't understand the logic in your replace() method, to create the new path of the file. In addition, the property "name" of the fileObject is invalid, it must be 'name '. I think that there are simpler ways to do.

  -Your call to the Save() method is incorrect. It should be fileObject.Save (saveAsName, saveParams, returnParamsp).

  All that being said, here is a quick review, without comment, that works for me:

  var sourceDoc = openXmlFile("C:\\Users\\rajrev\\file.xml","XML snpsbook");
  if (sourceDoc.ObjectValid()) {
  
      var path = sourceDoc.Name;
      var filename = path.substring((path.lastIndexOf("\\") + 1), path.length);
      filename = filename.replace(".xml", ".fm");
  
      path = path.substring(0, (path.lastIndexOf("\\") + 1));
      path = path + "transformed_files\\" + filename;
  
      //path testing
      //alert(path);
  
      saveToFm(sourceDoc, path);
      sourceDoc.Close(0);
  }
  
  // Function to open and XML file
  function openXmlFile(filePath, structApp) {
      var openParams = GetOpenDefaultParams();
      var i = GetPropIndex(openParams, Constants.FS_OpenAsType);
      openParams[i].propVal.ival = Constants.FV_TYPE_XML;
      i = GetPropIndex(openParams, Constants.FS_StructuredOpenApplication);
      openParams[i].propVal.sval = structApp;
      var  returnParams = new PropVals();
      var doc = Open(filePath, openParams, returnParams);
      return doc;
  }
  
  //Function to save the opened XML as an FM file
  function saveToFm(fileObject, savePath) {
      var saveParams = GetSaveDefaultParams();
      var i = GetPropIndex(saveParams, Constants.FS_FileType);
      saveParams[i].propVal.ival = Constants.FV_SaveFmtBinary;
      var saveAsName = savePath;
      var returnParamsp = new PropVals();
      fileObject.Save(saveAsName, saveParams, returnParamsp);
  }