Load fonts of size > 90 KB

Similar Questions

• WHY do we have a % * # update every 2 weeks until persists 1 really bad bug (fonts and sizes change randomly when entering)?

  Y at - it sort of STOP TB, to send updates every two weeks (and BTW this slowed down TB / crashed more and more in the last two months) until they have fix this really irritating bug to randomly change the fonts and sizes when you write an email? Outlook does not, Apple mail, didn't do so to stop spamming and begin to address the real problems for a change!

  Nothing of the sort, overall we are very poor typists. How can I know what others are doing? I do it myself. I touch type? Not and nor do the vast majority of people. Even those who say they do.

  How can I know something about the issue? I've seen other people complain and the results are similar to the serious, where my advice. In my opinion, that most of the people with problems touch with appearance and no content is also to experience. Most are apparently not aware more you are trying to improve the appearance of your mails using the fonts and sizes the worst they look almost invariably to the purchaser who does not have the police fancy you selected.

  In my opinion, the code that goes into the composer's poor by the standards of today and the suffering of his age and bitrot. Most of it is written in C++, and most of those who work on Thunderbird are people of Javascript. I do not worship at the altar of God any Mozilla and I have few illusions. Either on the code, program or the people who use it. Or at least I like to think so.

  What I hold as a hope, it's a complete rewrite of the composer happens, or at least people who can make the scriptable code so many of these things can be upholstered.

  Your comments about Microsoft releases and past years their fixation are neither correct nor helpful. Unfortunately the back doors and new threats are discovered almost daily. The software industry overall solves the problems as soon as they can and issues a patch. Automakers weigh the cost of litigation related to failure (how can die, be injured) against the cost of a recall. Sorry, but as far as I don't like regular patching, I prefer the approach of the automotive industry.

• How can I permanently change the default font and size in outgoing emails in Hotmail?

  I can't figure out how to set the default font and size for the text of all of my outgoing Hotmail emails.  Help!

  Hello

  Please repost your question in hotmail in the hotmail link below forums

  http://windowslivehelp.com/product.aspx?ProductID=1

• How to load fonts Open Type (example Slate Pro) for FXR

  
  Hello

  I'm trying to load fonts of Type Opent to the file fxr using DM studio version 11.5. But I get an error message "Failed to load the required Java Library JFNLib.Jar!". I tried the same approach by converting OTF to TTF fonts by using some online sites. I still get the same error. If anyone can help with this?

  Thank you.

  Niranjan

  You can check the version of jvm.dll that you use (right-click on jvm.dll to access properties). You will need version 7 or higher (version 8.20 is later). If this doesn't help, you'll probably need to contact Support and let them diagnose it further.

• «After effects WARNING: failed to load fonts "^ 0" «Neue Helvetica "»

  Today, trying to run after effects CC, I get the above error. -Helvetica Neue IS installed on my system.

  When I click on OK in the first error dialog box, a second dialog box appears:

  "Cannot load fonts required for the Interface of effects after. Please replace fonts or reinstall after effects. ' - then a third dialog box appears: ' after that effects can't continue: unexpected failure during the application startup "-where can I get this mystery police? Or if not, HOW can I "Reinstall After Effects?"

  Thanks for any help.

  The after effects CC (12,2) update solves this problem.

  Let us know how it works for you after installing the update.

• After update 12.1 - Unable to load fonts "^ 0" "Helvetica Neue" error

  I've just updated after effects CC 12.1, and I now get the following error during the launch:

  After effects WARNING: failed to load fonts "^ 0" "Neue Helvetica".

  After pressing OK, I get another error:

  Cannot load fonts required for the After Effects interface. Please replace fonts or reinstall After Effects.

  And then a final error:

  After that the effects can't continue: unexpected failure during the application startup

  I'm on Mac OS 10.9 and it worked very well with the 12.0.1 patch. I checked that Helvetica Neue is installed and all other CC applications work fine. Any ideas?

  The after effects CC (12,2) update solves this problem.

  Let us know how it works for you after installing the update.

• Amendment of the text of the scanned image. I want the same text font and size.

  Hello, I was wondering if it was possible to edit an image scanned with the text on the subject. I want to replace/remove/change the text on my scanned image but I want it to be the exact same font and size and color. Color should be easy enough. But how can I do other things? Also, is there a way to simply copy the bottom of my scanned image and get rid of all the other stuff on it? Thanks to all who help.

  If the site does not recognize fonts, you may be able to illuminate the background.  You can use Image - adjust - curves both illuminate the background and obscure the text, end up with something like this:

  

  But you don't really have to go to WhatTheFont.com for this one...  It's pretty clear the font Arial Windows (I recognized immediately)...  Looks to be about 20 points in size.  You can either use the variant "BOLD" to the police, or the fake fat Photoshop character Panel feature which seems to be a closer match:

  

  -Christmas

• New attribute displays on the page in a different font and size

  It is the first task of OA framework that I did. I extended a VO, by adding an attribute, then I've customized page and then displays the new attribute. However, when I run the page of JDeveloper, attribute is not the same font and the size of the text is larger than all other elements on the page. What is needed to get the new matching attribute (font and size identical) other data displayed by the page? Or is it all just because I'm short of JDeveloper?
  
  I am running Oracle e-Business Financials 12.0.6. and using JDeveloper 10.1.3.3.0
  
  Thanks for any help.

  Hello

  Try to set the CSS class for this field... You can check the link below... try using OraDataText

  http://www.Oracle.com/technology/tech/blaf/specs/textStandards.html

  Thank you
  AJ

• How change the font and size of the textarea element

  Hello - I have several pages of form who have for the most part, the text elements. However, I do
  the few pieces of textarea, and are by default the font and size of these
  something different than the text elements.
  
  How can I change the font and the size of the textarea, such a preference items
  how it will apply to all textarea elements in my application?
  
  (And to take a step back, where can I find definitions of police and the size of these)
  elements? I guess it's in CSS (?), but don't really know what to look for.)
  
  Thank you
  Carol

  This type of problem is usually due to Re: Textarea font different from that of the text fields, which will almost always cause Re: Multiselect list police-family.

  You use one of these themes? If so who?

• What is the font and size of the properties of the project?

  What is the font and size of the properties project content?

  Hello

  The font and size that you see for project or indeed any object is that you have defined in the configuration on the view tab Manager.

  His suffering to MS Sans Serif/8

  Thank you!
  Prashant

• Font and size: how to change the default (for outgoing e-mail)?

  I'm going to 'Write', I put it in the address, etc., and when I start typing my message, the font size is tiny, the font is Times, although sub
  Format - fonts, I see Helvetica and size is extra-large. Sometimes using "fixed width" gives me a better font size. I then choose a font of
  "Choose a font", and I'm all set. However, I have to go through the same procedure for each e-mail! Help!

  Try changing the settings in Tools - Options - display - (tab) - (article) fonts & colors - formatting, enter a default font and the font size to use when NO other formatting is specified.
  Now press the button on the same line,
  in the next window, make sure that the police and & the font size you want entered in the selection boxes.
  Under the control of the police - the two boxes ticked? Your choice.

• I want to know how to change the size of fonts and size of the pitcure of my screen

  I would like to help on my font size and the size I see on my screen, it's huge, and I would go back to normal size.

  I am running Windows XP Home Edition.

  I thank all those who can help me.

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  Here is the Vista Forums.

  See you soon

  Mick Murphy - Microsoft partner

• fonts & background size

  After installing windows updates all my policies and my background when it is very small.  How to restore the original font size, I had?

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understand the Extras in Windows Vista and Windows Update info is at the link above.

   

  Remove the Vista updates; two ways to do this:

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If you use Norton, disable it before using the system restore.

  If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

  Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

  System restore steps according to the info above.

  Also:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not fix it:

  Go to the Web site of the manufacturer of your laptop computer-graphics/computer card > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  Then:

  http://Windows.Microsoft.com/en-AU/Windows-Vista/change-screen-resolution

  Change the screen resolution

  Screen resolution refers to the clarity of the text and images on your screen. At higher resolutions, items appear sharper. They appear also smaller, so more items adapted to the screen. At lower resolutions, fewer items adapted to the screen, but they are larger and easier to see. At very low resolutions, however, images may have serrated edges.

  See you soon.

  Mick Murphy - Microsoft partner

• The exact font custom size

  Hello

  I have a label in QML. I applied a textstyle to the label.

  textStyle {}
  fontSize: FontSize.PointValue
  fontSizeValue: ui.sdu (2.7)
  color: Color.White
  }

  I would like the text in the label of a height of text sizes exactly 27 (on Z10). It turns out that fontSizeValue is specified in postscript points format, which is not the same as the design of units... How do I know how many points postscript is required for 1 on Z10?

  BR, René

  Hello

  This turns out not to be a specific problem BB10. A good explanation is located here:

  http://StackOverflow.com/questions/139655/convert-pixels-to-points

  In Blackberry font sizes are specified in points (pt) postscript. There are 72 points per inch. So 1 point is 1/72 inch.

  In user interface designs sometimes fonts are specified in pixels (in my case). If we have the dpi of the screen, then we can convert points to pixels and vice versa.

  This method in QML will convert pixels into points for fontSize:

  function pixelsToPoints (pixels) {}
  var resolution = displayInfo.resolution;
  1 inch = 2.54 cm.
  var dpi = Math.round ((resolution.width / 100.0) * 2.54);
  Console.Debug ("PPP:" + dpi);
  Calc var = (pixel / dpi) * 72;
  var pt = Math.round (calc + 0.5);
  Console.Debug ("pt:"+ pt ');
  return pt;
  }

  BR & thanks,

  René

• My e-mail page offers no possibility to choose the type of font or size, only default font size 8! Would appreciate someone's help.

  My laptop has no possibility to change the font style or the font size.

  The only font available (with no option to change) is the font size 8

  that must be hard for a player.

  What I need and I use to have, but he disappeared to, I

  no idea, is the same kind of layout at the top of the page that

  My husband has on his desk. He can choose almost ANYTHING! Police

  size, color, bold, underline - this. Me, nothing!

  Looks like I need a re vamp around my email page and, oh, by

  the way, do not get too technical, I am a student with a big L.

  Would be grateful someone willing to give of their time to advise how

  to restore the page send to its original design. Her husband can't stop;

  He knows less than me.

  Value your plain text mail format?

  If so, click on the drop-down arrow next to the text and choose Rich Text.