Load order of Java

Similar Questions

• Target Load Order Bug?

  Version: 12 c

  I defined the load order of target to:

  T1, T2, T3

  But it still generates jobs as:

  T3 - IKM Oracle Fusion load

  Load T1_T2 - KM unknown (it is actually IKM Oracle Multi-Insert.GLOBAL)

  Help, please!

  There is a solution, but it requires some work on the physical tab.  You must drag the elements around so that you end up with two targets.  The first target loads the multicables at T1 and T2 and the T3 the second target loads.  They must default to run in the series, which is what is needed.  Do not operate in parallel.  I had trouble with the icons at the top left of the updated (blue squares) execution units.  Move to the rear and logical view must correct them.

• Adding mapping meadow breeze target load order process

  OWB 11.2.0.2 on Oracle database 11.2.0.2
  
  I created a map that has 4 sources (views on the external tables) and 4 target (3 regular tables).
  
  V1 = > T1 (truncate/insert)
  V2 = > T2 (truncate/insert)
  V3 = > T3 (truncate/insert)
  V4 = > T3 (update/insert)
  
  The foregoing is the order of loading of target. It tested fine.
  
  I added a preliminary mapping (packaged procedure) process that is not related to one of these source/target tables, but a few outputs or triggers a failure to control if the mapping needs to continue to operate or not.
  
  When I run it, the counties selected/insert/merged are identical, but from what I see in T3 is that order was followed by update/insert to insert/truncate. I checked the target load order remained the same.
  
  Has anyone experience this problem?

  Hello

  For OWB 11.2.0.2 target load order property set to "False" by default.
  If this is the case you can not ensure that the targets will be loaded in the order specified. It must be set to 'true '.

  Right click on your map and select configure-> properties-> target use loading Code generation for real command set.

  Please note that you must have the ODI EE license, and you must have installed OWB with opton Enterprise to set this property.

  Kind regards
  Pnreddy

• Load order of target does not work properly in 11.2.0.2

  Hello
  
  Mappings that are migrated from version 11.2 OWB10.2 that contains several targets do not work according to the load order of target given in the mapping.
  
  The order in which targets are responsible for changes between execution.
  
  To test is that a problem with the migration that we had created a smaple target containg 3 mapping and mentioned the order in each target table as well as the mapping of loading property.
  
  The order in which targets are loaded was random. But when we have 2 targets it seems to work. But for the migrated maps is also not working.
  
  Y at - it a bug reported in 11.2.0.2 for that matter? Any help is appreciated.
  
  Thank you and best regards,
  Pnreddy

  Make a right-click on your mapping--> configure--> Code generating options--> charge of target to use ordering her--> Set true

• opposite problem file load order

  I'm trying to upload 4 photos. Loading is fine, but the order is reversed.

  This is the code:

  function showThumbnail(id:String, xmllist:XMLList):void{
   var pics:XMLList = xmllist.(@name == id).*;
   
   for each(var i:XML in pics.pic){
    var loader:Loader = new Loader();
    loader.contentLoaderInfo.addEventListener(Event.INIT, loadPicCompleteHandler);
    loader.load(new URLRequest(i.@url));
   }
  }
  function loadPicCompleteHandler(e:Event):void{
   var mc:MovieClip = new MovieClip();
   if( picIndex == 5 )
    picIndex = 1;
   mc.name = "pic" + picIndex;
   mc.x = firstPicX;
   mc.y = firstPicY + (picIndex-1)*(picHeight+picSeparation);
   
   trace("I:" + picIndex++);
   trace("mc.x:" + mc.x);
   trace("mc.y:" + mc.y);
   
   trace(LoaderInfo(e.currentTarget).url);
   
   mc.addChild(LoaderInfo(e.currentTarget).content);
   addChild(mc);
  }
  

  The 'I' is the index of the image. I think that the order should be png 2. PNG 3. PNG 4. like the order of the xml 1.PNG ~ ~

  It is the output:

  I have: 1 mc.x:11 mc.y:27 file:///D|/works/Flash/thumbnails/4.png I: 2 mc.x:11 mc.y:210 file:///D|/works/Flash/thumbnails/3.png I: 3 mc.x:11 mc.y:393 file:///D|/works/Flash/thumbnails/2.png I: 4 mc.x:11 mc.y:576 file:///D|/works/Flash/thumbnails/1.png

  Assuming that the path of the url is the last, you can see that they don't are not reversed, all mixed, which is normal for an uncontrolled loading.  If you want to control the load order, then you will need to load each file one at a time.  To do this requires a counter variable, a function to start loading the idenified in the file of the current value of the counter and assign a listener to the completion of the load and a function handler for end of charge to process the charge... file increment the meter... and call the first function, if the value of the counter (compared to the length of the array) says more needs to be run.

• What happens if I don't know several target load order in advance?

  OWB always lets user to set a load order target for mapping that has multiple targets, what should I do if I don't know in advance the target load order?
  
  Load order sometimes target is determined by the source table (file) and change several times during execution according to the record in the source.
  
  A set of example of the record.csv of the source file data is defined as: (insert I:, U:update, delete D)
  Action, DateTime, key, name Desc
  I, 71520031200, ProdABC, ABC, ABC product
  I, 71520031201, CRC, ProdCDE, produces CDE
  I, 71520031202, XYZ, ProdXYZ, product XYZ
  U, 71620031200, ProdABC, ABC, ABC produced with option
  D, 71620032300, ProdABC, ABC, ABC produced with option
  I, 71720031200, ABC, ProdABC, former ProdABC reintroduced
  U, 71720031201, XYZ, ProdXYZ, rename XYZ
  
  You want to load the data into a target table as follows:
  DESCRIPTION OF THE NAME OF THE KEY SRC_TIMESTA
  CRC product ProdCDE CDE 71520031201
  71720031201 XYZ ProdXYZ rename XYZ
  ABC 71720031200, ProdABC former ProdABC reintroduced
  
  Solution: we define three targets, one for insert, delete and update.
  The order of loading for these targets are exactly the order in the file line by line, of the source, so order here are not determined, how instruct owb to load targets in the order of the records in the source?

  Agree with Dallan, you CAN get it works.

  Your flow of source table separator which has three external groups according to your flag field and you have three targets defined by type of operation. Don't worry about the definition of an explicit load order.

  For OWB to generate Code that works, on the configuration tab set:

  Block size = 1
  By default the operating Mode = line on
  Optimize the Code checked =
  Use the load order target = unchecked
  Bulk processing = Code checked
  Generation line Mode = on

  And the generated code SHOULD do what you want, scroll down your input in the order at a table and apply the proper functioning of this line.

  Now, if OWB keeps their code generating engine constant from one version to the other is debatable. Frankly, I would like to make a remark that future updates OWB would need to re - test this map.

  I should also mention that I am always wary of any implied order in a select statement, which assumes the code. It is expected that a "Select * from external_table" will bring back lines in the same order as the file. And he cursed well should!

  But no one has ever seen Oracle guarantees the order of query results when it is not explicitly specified in a clause "order by"?

  Me too.

  And given my distaste of uncertanty and assumptionms, I would say that IF the order of processing is a neccessity then I would add a pseudo-column RECNUM to the external table definition and order it before executing by the dispatcher to ensure this order.

  Mike

• Firefox wouldn't load facebook without java but my java is on I tried a refresh and now won't load profile

  I went to bed. woke up pc turned on. and all of a sudden, facebook wouldn't load without java. I went and he seemed to ask before activate has been activated. I shot it is never, and then hand it to ask and did not work. then I turned it forever and forever, and it still doesn't load. Then I tried to update firefox but she never completed refresh. I had the old data of firefox on desktop folder. I tried to uninstall and reinstall since updating firefox usually open to all. said of the profiles is missing or inaccessible.

  Sorry, when an update is interrupted, it can happen. Please start by creating a new profile. There is no data in it, but it will get us started.

  You will start the Firefox profile manager using the Windows Run dialog box (hold down the Windows key and tap R) or the system on the charms bar search box. Paste the following and press ENTER:

  firefox.exe -P
  

  This should start a small window.

  Click on the button to create a profile, assign a name like OldSettings and ignore the ability to move the profile folder. After you create the profile, select it and start Firefox in this profile.

  I guess that Firefox works?

  With Firefox running, you have two choices:

  (1) selectively restore some key data

  You can manually copy important files from your old profile (like bookmarks and saved passwords) folder to the new. The following support article lists the key files: recovery of data from an old profile.

  (2) completely "roll back" the refresh

  He isn't in one step to do this, it means the copy of ALL your old data from your old profile folder to the new files. Good news: all the data. Bad news: everything that has been bogged down your Firefox before is likely to be back. Yet, it could be easier overall.

  Details of these measures are in another recent thread: https://support.mozilla.org/questions/1145726#answer-933024

• SQL Load ORDER BY clause

  Does anyone know how or where to enter in the ORDER BY clause when you use a SQL data source in a load rule? I prefer to do the classification in the State of charge rather than create a view on the side of the DB for this if possible.
  
  According to the documentation "box of the SQL statement in Open SQL Data Sources dialog box provides Select, From, and where areas of text that helps you write SQL queries." You can specify multiple data sources, filter the display of folders and specify how the records displayed in the data editor Prep are classified and grouped. "but I have not found anywhere where you can order or group data. I don't need to be able to group data I want to just be able to control my data to make the most effective possible charging process.
  
  I sort the data by inserting into the table of load, but Oracle is not necessarily insert the records in the table according to their order when you go.
  
  We're currently on 11.1.1.3 Essbase and Oracle 11 g.
  
  Any help is greatly apprecied.

  Just nail it on your WHERE clause in the area WHERE the. I think that you can even stick the entire statement (under the keyword "SELECT") within the area of SELECTION.

• Impossible to load and use java corrupted c:\Users\AppData\Local\Temp\fx-runtime.exe

  How to fix c:\Users\AppData\Local\Temp\fx-runtime.exe

  Hi Bob,

  You have made any changes to your computer recently?

  I suggest you to follow the steps and check if it helps.

  Uninstall Java and install the latest version of Java and check if it helps.

  Step 1: Uninstalling Java.

  How to uninstall Java on my Windows computer?

  Step 2: Install the latest version of Java.

  Free download Java

  If the problem persists, contact support for Java and check if that helps.

  Support options

• Order of JAVA ME on Raspberry PI software servo with/dev/servoblaster

  Long post:
  I use JAVA ME on Raspberry PI to drive the different engines and a robot sensors, everything works fine, but also wanted to do servos from the software. Apparently I can't do it directly by the control of length of puls of software on an operating system such as Raspberry PI, too vague. So, I tried to switch to the use of servoblaster that uses the DMA access to control the pulse duration. It works fine when it is called from python or command line, but now, I want to call from JAVA ME program.
  For this I need to write some simple arrangements to/dev/servoblaster.
  After start, l - ls/dev/servoblaster shows:
  PRW-rw-rw-1 root root 0 Feb 8 16:55 / dev/servoblaster
  I tried to use the following code, with a few expressions of feeling between the two, to open the servoblaster that I can then send values to him to drive the servos:
  
  ServoPath path = FileSystems.getDefault().getPath("/dev","servoblaster");
  System.out.println ("set path" + servoPath.toString ());
  outStream = Files.newOutputStream (servoPath, WRITE);
  System.out.println ("created outstream");
  
  Also, I tried another method in JAVA ME 8 with the following code. The two options are the MOOC on JAVA ME course.
  connection = (FileConnection)
  Connector.Open ("file:///rootfs/dev/servoblaster", Connector.WRITE);
  System.out.println ("connection opened");
  fileWriter = new PrintStream (connection.openOutputStream ());
  System.out.println ("filewriter started");
  
  In both cases, the statements will fail on the line 3^rd , that is the opening of the OutputStream. I get an error on the invoice, pro forma raspberry:
  
  [CRITICAL] [SECURITY] iso = 2:Permission check failed: java.io.FilePermission "/ dev/servoblaster" "write".
  TRACK: java.security.AccessControlException: >, lanceApp generated an Exception
  Although I defined the following permissions
  java.io.FilePermission "/ *" 'write '.
  and
  javax.microedition.io.Connector.file.write
  javax.microedition.io.Connector.file.read
  
  

  So far, my conclusion is that fails because JAVA ME8 does not support a PipedOutputStream
  

  My other option would be to escape from the command line, make echo/dev/servoblaster settings and then return to the JAVA ME program
  but I found that JAVA ME also does not support the runtime exec command so I can't do that.
  

  So my only option now seems to be to move to JAVA SE. I tried servoblaster of JAVA SE and that works very well, I just open it and send data to it, servo reacts, no problem. But then, I still need to control other motors and sensors.
  
  
  I then tried install libraries open jdk.dio on the IP, so I can still use what I've done so far, but the installation instructions are not clear to me, and do not work.
  
  
  So now I'm moving away from JAVA ME and move to JAVA SE with PI4J, unless someone here can help me out.
  
  
  Thank you
  Willem

  Hi Willem.

  That's right, JavaME can open only normal files (link, pipes, blocks, char, FIFO, and socket is not supported).

  / Sergey

• load order

  I'm trying to get a .oam file to load the first page rather than wait for other animations to load. I chose the alternative "immediate" on the edge, but I don't think it applies. Is it possible to specify in the Muse?

  Thank you

  You must customize it and force the loading of the content of the page.

  Thank you

  Sanjit

• 8 load order Dell venue

  Hello

  I had a Tablet Dell place for 6 months, and one day the stopped device support all together. I have noticed this and I continued with until he was dead, since I use it for commercial purposes.

  I have it plugged into different outlets and have even connected the USB to your laptop in the hope that it will charge. Nothing has worked yet.

  How can I go on get help solve this or have what it replaced?

  Thank you

  It should still be under warranty. You can contact Dell or use the chat feature. The charger is bad or the circuit of power of the cushion is defective.

• Clip loading reverse order?

  I have a component in my library which is a miniature. Well the thin just inside is a code to load a thumbnail jpg file.
  Here's the situation. I use a loop for to add a series of these linked clip displayed on the stage. All of same clip, the path of thumb and various pos FLF is pass to the clip as a parameter. The question is how the burden of the clamp. They appear one after the other, but the load order is reversed. The last one added to the timeline is the first loading a ti and display follow each other and so on. If there is a loop of 10, 10 and 9, 8, 7 clip load...
  
  Why? Is it as LIFO of Java concept. Last in first out which Manager flash it?
  
  Thanks for your help.
  
  I know that I can put the reverse order and attached the last of them on the stage first and so on, but I understand the problem, do not have a work around... ;-)

  Yes, maybe they start to load to closely. There are several images, never great, a few thumbnails. The size of each is approximately the same. I did the test online. Even if on the computer, it might be different, the real test is online.

  Maybe I can use the ' for in ' GWD says or any simply begin with the last element and then to I-. Well I'll try it.
  Tanx for your help both

  HO, also, thank everything in the ' for in '. I didn't know that it worked this 'Stock' way first, and it can be useful sometimes. I appreciate your help!

• Load java classes in ORACLE database error: () Ljava/util/list ;) catch_type not a subclass of Throwable

  Hello

  I tried to load java classes in the database using the loadjava tool, but I get a warning which causes an error when calling the java method of procedure PLSQL.

  ERROR: ORA-29552: check warning: java.lang.VerifyError: (class: method com/mq/RIMSmqToolsIn,: mqRead signature: () Ljava/util/list ;) catch_type not a subclass of Throwable)

  I think that it is a problem of dependencie for some missing java classes that need to be solved using loadjava tool but I could not understand what pot should be used and how is the correct command with laodjava?

  NB: I tried to use a jar file that contains java.util.List.class, but I still get the warning when loading

  Thank you very much

  ANTHONY

  Hello

  This error occurs when the dependency jar files loading in the java command loads separate.

  Load all the jar files in a command unique loadjava as below:

  loadjava, sys/eu1 - r u - v-f--s-grant public - genmissing xyz.jar xyz1.jar

  Before loading jar files drop them in the database.

  Thanks and greetings

  Vincent

• Open batch FDMEE order

  Hello

  I use FDMEE 11.1.2.4 in the docs it reads...

  page 283

  13 step files data source based on files by copying them on inbox\batches\openbatch using a

  of the following methods:

  l rule data loading preset - use a predefined data rule that loads the data in function

  Specific categories, let the data field create an Auto empty rule on the definition of lot

  the screen and create loading data (see 'Definition data load rules to Extract Data' on the rule)

  (page 161).

  Next, create the file name to open in the following format batch:

  FileID_RuleName_Period_LoadMethod. The file id is a free-form field that you can

  to control the load order. The batch files load in alphabetical order by file name.

  I created 2 load files

  

  I've set up the batch

  

  One might expect that the file a ~ TestToBIFHM ~ real ~ Jan 15 ~ RR.txt must run first... right?

  Well... No...

  

  2015-12-14 17:40:20, 655 [AIF] INFO: Jython Version: 2.5.1 (Release_2_5_1:6813, September 26 2009, 13:47:54)

  [JRockit (R) Oracle (Oracle Corporation)]

  2015-12-14 17:40:20, 655 INFO [AIF]: Java platform: java1.6.0_37

  2015-12-14 17:40:20, 656 [AIF] INFO: log the file encoding: UTF-8

  2015-12-14 17:40:20, 806 INFO [AIF]: a valid token has been recovered.

  2015-12-14 17:40:25, 682 INFO [AIF]: beginning of the process, package ID: 88

  2015-12-14 17:40:25, 683 INFO [AIF]: package name: BIHFM_OpenBatch

  2015-12-14 17:40:25, 685 [AIF] INFO: open lot of execution: BIHFM_OpenBatch

  2015-12-14 17:40:25, 687 [AIF] INFO: copy of Src Dir: \\Irc-gold124\fdmee/inbox/batches/openbatch/, Tgt Dir: \\Irc-gold124\fdmee/inbox/batches/openbatch/88

  2015-12-14 17:40:25, 716 [AIF] INFO: open lot of performance for file: b ~ BIHFM ~ real ~ Jan 15 ~ RR.txt

  2015-12-14 17:40:25, 717 INFO [AIF]: rule BIHFM_Actual of data already exists in the system. In using this.

  2015-12-14 17:40:25, 774 INFO [AIF]: data rule name: BIHFM_Actual

  2015-12-14 17:40:25, 774 INFO [AIF]: name of the start-up period: Jan-15

  2015-12-14 17:40:25, 774 INFO [AIF]: name of the period of the end: Jan-15

  2015-12-14 17:40:25, 775 INFO [AIF]: Import Mode: R

  2015-12-14 17:40:25, 775 INFO [AIF]: Import Mode: REPLACE

  2015-12-14 17:40:25, 778 INFO [AIF]: export Mode: R

  2015-12-14 17:40:25, 778 INFO [AIF]: Export Mode: replace

  2015-12-14 17:40:45, 828 [AIF] INFO: execution were made for file: b ~ BIHFM ~ real ~ Jan 15 ~ RR.txt

  2015-12-14 17:40:45, 829 [AIF] INFO: open lot of performance for file: a ~ TestToBIFHM ~ real ~ Jan 15 ~ RR.txt

  2015-12-14 17:40:45, 830 [AIF] INFO: rule TestToBIFHM_Actual of data already exists in the system. In using this.

  2015-12-14 17:40:45, 887 NEWS [AIF]: data rule name: TestToBIFHM_Actual

  2015-12-14 17:40:45, 888 INFO [AIF]: name of the start-up period: Jan-15

  2015-12-14 17:40:45, 888 INFO [AIF]: name of the period of the end: Jan-15

  2015-12-14 17:40:45, 889 INFO [AIF]: Import Mode: R

  2015-12-14 17:40:45, 889 INFO [AIF]: Import Mode: REPLACE

  2015-12-14 17:40:45, 890 INFO [AIF]: export Mode: R

  2015-12-14 17:40:45, 891 INFO [AIF]: Export Mode: replace

  2015-12-14 17:41:04, 998 [AIF] INFO: performance have been made to file: a ~ TestToBIFHM ~ real ~ Jan 15 ~ RR.txt

  2015-12-14 17:41:05, 017 [AIF] INFO: mannequin

  2015-12-14 17:41:05, 134 INFO [AIF]: end process FDMEE, process ID: 88

  Has anyone else seen elsewhere?  Am I missing something?

  Thank you

  Wayne

  In response to the SR, we raised...