load the metadata: check integrity not available

Similar Questions

• "The selected printer is not available or has not been properly. Check your printer or try to select another printer.

  Hello.

  I recently got a new computer. I have installed the printer software and it successfully print a test page. He will appear in devices and printers. Device Manager says it's working properly. However, it will not print anything else. No PDF no Word document, no web pages. Right now I get the error message that I put in the subject of the message, on a gray page. I turned it works again, I removed and put the cables. I don't know what else to do. Anyone know what is happening here?

  The convenience store has found nothing wrong.

  I reinstalled the printer software.

  Once again, the error message is; "The selected printer is not available or has not been properly. Check your printer or try to select another printer.

  Thanks in advance.

  For troubleshooting, please follow the links with the steps below.

  Click on the link below to fix common printer problems:

  Solve printer problems

  Follow the steps below on how to print attachments in Outlook 2010:

  Print attachments received in e-mail messages. Outlook 2010

  Follow the steps indicated by the ZigZag3143 (MS - MVP) on this link:

  Print from Outlook.com

  Follow the steps below on how to erase and reset the printer spooler:

  Clear Printer Spooler queues and activate the Spooler Service Print spooler is the main component of the printing interface. The print spooler is an executable file that manages the printing process. Print management is to retrieve the location of the correct printer driver, load the driver, queue function calls high level in a test of the work, schedule the print job for printing and so on. The spooler is loaded at system startup and continues to run until the operating system is shut down.

  Keep us updated.

• UCR-6002: the database specified does not have the minimum requirement to load the metadata repository.

  Hi all

  I want to install a test environment with the following software products:

  WebLogic Server 10.3.6

  WebCenter Capture 11.1.1.8.0

  WebCenter Imaging 11.1.1.8.0

  BPM 11.1.1.7.0

  SOA Suite 11.1.1.7.0

  Oracle Database Enterprise Edition Release 12.1.0.2.0 12 c

  I use the remote 11.1.1.8.0 to create the database schemas.

  When RCU checks the prerequisites, it comes up with a warning as follows:

  «The database you connect to, is one newer than the supported version.» See the matrix of certification for the supported DB versions".

  If I type 'ignore' on the message box, it stops the verification process will not continue. Also, if I type "Cancel" does the same thing.

  The error message displayed in the Message box is both below:

  UCR-6002: the database specified does not have the minimum requirement to load the metadata repository.

  UCR-6080: Global check prerequisites failed - requirement of verification for the specified database

  The database that you connect is a CDB that is not supported.

  Action taken:

  1. check again on the database character set and confirmed it is set up correctly for AL32UTF8

  2. the databases are supported for WebCenter 11.1.1.8.0 + 12.1.0.1, so the database version is supported.

  Hope someone knows what's going on.

  Thanks in advance.

  Try to create a plugable (PDB) database within the CBD and then rerun

  the UCR.

  May be restricted the RCU to install MDS and other schemas FMW the

  CBD, but rather in the PDB.

  More information on PDB and CBD you can find here

  http://docs.Oracle.com/database/121/CNCPT/cdbovrvw.htm#CNCPT89235

  Hope that helps,

  Anatoli

• I have lot to save my adobe photoshop cs6, when I try it starts to load then stops and gives me the message "the activation system is not available at this time." What should I do if I continue to use my photoshop?

  can you help me register my creative suite premium adobe cs6?

  I have lot to save my adobe photoshop cs6, when I try it starts to load then stops and gives me the message "the activation system is not available at this time." What should I do if I continue to use my photoshop?

  Check your hosts file.

  help for that and other adobe.com sure common connection problems read, http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

• I can not get the automatic updates on my samsung jack sgh-i616. _ "connection to the update server is not available. Check your data connection settings and make sure that the device date and time are correct "___RESULT CODE: 80072ee7__ _"

  I can't get the automatic updates on my samsung jack sgh-i616.

   

  "Connection to the update server is not available. "Check your data connection settings and make sure that the device date and time are correct.

   

  RESULT CODE: 80072ee7

   

  -It is a windows mobile 6.1
  
  
  Thank you very much! = D

  As a guide.

  This error code translates ERROR_INTERNET_CANNOT_CONNECT.

  You may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates
  http://support.Microsoft.com/kb/836941

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• When I click on file--> information about the file, I get this msg "Cannot complete the File Info command because the metadata library could not be loaded."?

  When I click on FILE-> FILE INFO in Photoshop, I get this msg "Cannot complete the File Info command because the metadata library could not be loaded."  He works in bridge, but not in Photoshop.  Used to work in Photoshop, I think that before the last update.  What gives?

  FINALLY, there is a new update to Photoshop.  I downloaded it, and the problem is solved!

• NLB - the RPC server is not available on the specified computer. To connect to the < Server >

  Have a Windows 2008 R2 SP1 NLB service two nodes on VMWare. Bothe nodes have two network cards. Internal one dedicated to NETWORK load balancing and the other for the network.

  Management console of NLB on a single poster NLB node is in good health. The two nodes are visible and OK.

  Management of NLB on the other node shows only its own node - while the other node is missing. An error when updating...
  "The RPC server is not available on the specified computer. "otherNode.com" connection error"

  I disabled the back loop check - it makes no difference.

  Any help please?

  I think I solved the problem...

  As I wrote previously, I disabled the back loop check in the registry on both nodes, create a new DWORD (32 bit) key...
  HKLM\SYSTEM\CurrentControlSet\Control\Lsa\DisableLoopbackCheck - with a value of 1

  Then, I made sure that the link speed & Duplex on all network interfaces are set to a specific value (no Autonegotiation), for example. 1000 Mbps Full Duplex (in my case).
  Ideally only the NIC - on each node - connected to the NETWORK load balancing must be configured with hard values.

  This solved the RPC error in my environment of NLB.

  Hope this helps those who have the same symptoms.

  Samuel.

• The directx features are not available

  Hello, I would like to help with this problem, I'm gamer so this problem if resolve would make me really happy, problems appeared a [not that my graphics card is integrated, because the first is slow], first I get my computer restarts without reason [without getting any blue screen] but when my system recovers, they say, it is a blue screen problem , I sometimes get that my office is not running and other times my explore does not work, but now I tried to see if this question is in my old graphics card but the problem of funds did not produce second [the problem is my office bar white Towers below]

  but with all these problem my games where quickly runs without any problem, but restarting, but now they won't even begin! and I checked the dxdiag and it turns out that the directx features are not available [all of them], but in my old its anything graphics card! Please help me out here because this graphics card is so good as the former and it worked before and thank you.

  Hello Mohammad.

  Thanks for posting your question on the forum of the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  What is the full error message or code when you say, "directx features are not available?"

  I appreciate your efforts to resolve the issue. We will work together to solve this problem.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Please follow these steps and check the issue.

  a. open "Tool of DirectX diagnosis" by clicking on the button start, type dxdiag in the start search box, then press ENTER.

  b. click the "display" tab and then on the "DirectX features" tab, check if the 'DirectDraw', "Direct3D" or "AGP Texture acceleration" is marked as "not available".

  If this does not help, then use method 2.

  Method 2:

  Please use the suggestions provided in this Microsoft support article and check.
  Reference:
  Diagnosing basic problems with DirectX
  http://Windows.Microsoft.com/en-in/Windows7/diagnosing-basic-problems-with-DirectX

  Additional information:
  DirectX: Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows/DirectX-FAQ#1TC=Windows-7

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Failed to load the metadata server using GET_DOC_METADATA_INFO content model?

  Hi all
  
  I create connection in Jdeveloper to the repository of content both are 11.1.1.6.0 version. I'm creating RIDC Socket type Socket.
  everything by testing the connection I get under Error.UCM runs in other ways machine come IP. trying to connect from my local Jdeveloper.
  
  Test failed:
  Failed to load the metadata server using GET_DOC_METADATA_INFO content model.
  Permission denied. Address ' XX. XX. XX. XX'(IP) is not an authorized remote socket address. (IP replaced by XX...)
  
  Why his error.do showing that I need to put any changes of the UCM let me know problem question
  
  Please give me an idea about this error and the solution for the same.
  
  
  Concerning
  Siva sery

  To eliminate the first manifesto, see this post: fail to connect to the content if server use 'web' for the RIDC socket type and check that the other IP is allowed, amongst, IPs (you can use a mask, or type it directly) - do not forget to restart the server after the change.

  If this does not help, test, if other services such as DOC_INFO_BY_NAME can be called via RIDC, or if they have the same problem.

• FDM can be used to load the metadata in planning 9 and 11

  Hi John,.
  
  Can we use FDM to load the metadata in the planning of the 9 and 11 versions.
  
  Looking forward for your answer
  
  Thank you
  Sravan

  Not that I know, you can use it to load data into essbase database planning.
  You can read about FDM loading of metadata in version 11, but it's using the ERP Integrator which is located at the top of the ODI.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• How to load the metadata directly into essbase 9.3?

  Hi all
  When I load the metadata directly in essbase with IKM SQL for Hyperion Essbase (METADATA).
  My metadata is already on Microsoft SQL 2000. After run an interface that loads the metadata to essbase and check in the essbase outline, it seems that vector data can not retrieve correctly. And still have many rejected cases.
  
  My question is:
  Can I use the same rule file that used to load a metadata in the text file?
  Because in this case, I use the same rule file that load the text file metadata.
  
  Let me know if you need more information.
  
  Thank you in advance.

  Hello

  You can use the same rules file, check in the options of IKM, you have the same delimiter rules as in your rules file.

  You can also turn on error logging and logging in the options of the IKM, so you should get more information on why the metaload does not

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Satellite Pro P100: The extended warranty is not available?

  Hi, just about to buy a Satellite Pro P100, but when we look at the warranty I don't see this pattern on the list machines covered by the extended warranty available at Toshiba.

  Any ideas?

  It makes me a little nervous if Toshiba does not cover this model for extended warranty.

  Hello

  Did you mean Satellite Pro P100 or Satellite P100-xxx?
  I asked it because I don t find any laptops Satellite Pro P100 on the Toshiba site. Only Satellite P100-xxx are available and these books are very new. Maybe you checked the list of bad guaranteed?

  PS: I can t believe that the extended warranty is not available on this device.

• My internet rpet 'unidentified network' + "the default gateway is not available"...

  My internet was working fine before, but now repeat me 'unidentified network' and I know that's not my internet because I have another laptop that uses the internet itself very well. Then when I try to solve problems, he said "the default gateway is not available"... of the suggestions?

  Hello

  ·         Did you do last changes made on your computer before the show?

  ·         Using internet connection wired or wireless?

  Method 1:

  Follow the steps in troubleshooting from the link and check if that helps.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:

  Temporarily disable the firewall on your computer and check if it makes a difference.

  Reference:
  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

  Note: Makes sure to turn Windows Firewall back, once you have done the troubleshooting.

  Method 3:

  Reset WINSOCK, TCP/IP IPv4 and IPv6 TCP/IP stack.
  a. Click Start and in the search box, type cmd.
  b. right click on command prompt, select "Run as Administrator" to open a command prompt.
  c. at the command prompt, type the following commands:
  netsh winsock reset catalog which resets the WINSOCK entries to the default installation.
  netsh int ipv4 reset reset.log that resets the stack TCP/IP IPv4 default installation.
  netsh int ipv6 reset reset.log resets the default install IPv6 TCP/IP stack.
  d. restart the computer.

  Also, see this KB article:

  How to reset the Protocol Internet (TCP/IP)
  http://support.Microsoft.com/kb/299357

  Kind regards

• WiFi access limited, error: "the default gateway is not available.

  I just bought a laptop Windows 8 last December. It had been repaired twice (change the motherboard). He works all fine until last week, wifi connectivity started showing limited access. Furthermore, my IPV6 shows no access. I tried many solutions to many websites, but all will not work. Is there another way? When I trobleshoot the problem, it will show wifi Internet but when I run Google Chrome, it displays an error of internet connection. After I trobleshoot, the stated problem is "the default gateway is not available. In addition, he recovers in about 5 minutes after trobleshooting access. I need a solution as soon as possible. URGENT!  In addition, may I know what caused this do? I hope some of you can help. :(

  Dell Inspiron 7420, unique language of Windows 8

  Hi Amos,.

  I understand that your WiFi connection fails.
  According to the guidelines of the error (the default gateway is not available), there is a problem with the gateway IP address that does not connect to the internet.

  I would be grateful if you could answer the following questions:

  1. did you of recent changes made to your computer (installation of updates, device drivers)?

  2. which antivirus app do you use?

  What are the troubleshooting steps you have tried?

  Here are a few troubleshooting steps that you can try to solve this problem.

   

  Method 1: Manually assign the IP address and the default gateway and check if it works very well. Before you assign manually the IP address and the gateway by default, do
  a note of the IP address of the computer. To do this open command prompt, type ipconfig and press to enter. This displays the IP address, make a note of it.

  To manually assign the IP address and default gateway, follow these steps:
  a. in the system, right click on network icon tray. Choose the open network and sharing.

  b. click on change adapter settings

  c. right-click on the card's wireless connection and click on properties.

  d. Double click on Internet Version 4 (TCP/IPv4) Protocol and assign the IP address manually.
  Example: Old Ip address is 192.168.0.1
  Replace the IP 192.168.0.50
  e. leave the subnet mask and default gateway are the same.
  Subnet mask = 255.255.255.0
  Gateway by default, would usually 192.168.0.1 or 192.168.1.1
  f. click apply then click Ok and restart the computer and check if it helps to solve the problem.

  If the method above does not work, proceed to the next method.

  Method 2: I suggest you try the steps from the link given below:
  Wireless and wired network problems

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  
  

  If you have additional problems, please reply to this post and we will be happy to help you further.

• How to load the metadata cloud SEEP of Fusion GL

  Hello

  Can someone let me know how to load the metadata pending SEEP cloud of merger GL through the management of data (FDMEE).

  I'm not able to see the metadata tab rule in FDMEE, as there was in previous versions.

  Y at - it another option to load the metadata into the clouds.

  Kind regards

  Srikanth

  You can not directly integrate metadata into FDMEE PBCS. The metadata option has been disabled.