Loading files at startup or in an Action
I have a Preset of selective color I want to load PS startup or in an Action (Action preference). Is it possible to do this?
Thank you
Brett
You can be saving problems you action for several reasons. Over the years, the record of the add action mode has changes in CS4 Adobe added the range of settings. In the drop adjustment pallets Adobe adds two defective options. In fact, they are more like preferences but her does not work properly. Adobe recognized they are bugs, but has not removed the. Adobe is expected.
If you never touch these adjustment option. Photoshop will work like its designed and recorded actions that add adjustment layers may not work properly. If you change your default Adobe Actions that add adjustment layers may not work properly.
Because the options do not always work as you can save the new shares that add adjustment layers that always work the way you save. But you should save adding adjustment layers in a specific way. You must have an Active selection before adding an adjustment layer and you must add the adjustment layer by using the layer new menu adjustment layer > type so opens the box add adjustment layer dialog, in this dialog box, you must check the clip to the previous layer.
When you save adding adjustments of the layers in this way. The adjustment layer will always be added clipped and with a layer mask. It won't make any difference how options drop-down menu of the range of settings 'Add a default mask' and "Layer Clip" are defined will be awarded according to the recording. If you do not save the steps in this way step can deposit to play such registered.
Old version of Photoshop has saved a step when you registered adding am adjustment layer. This step has done two things add the adjustment layer and it perform the adjustment of the layer settings. Now, new versions of Photoshop are two steps. Make the adjustment layer and a second layer of the setting of the current step value. The recording of the second stage is also not recorder immediately. You can adjust the sessions over and over again until you are satisfied. It is only when you take your next step that a single Set current adjustment layer is recorded. You may have a problem here. You you select pteset and see noting is saved. It will be whem yo moe to your next step.
Here I record an action, you should see my custom preset is saved in the action stage. TOU can always delete the layer mask and the UN-clip adjustment to the OFT for action that you don't know how the action played. He a real problem for stocks and the Script can not set or Options.
Tags: Photoshop
Similar Questions
-
Startup error: unable to load file or assemblyl
I get this error message when you try to open my software:
Startup error: could not load file or assembly 'System.configuration, Version = 2.0.0.0, culture = neutral, PublicKeyToke = b03f5f7f11d50a3a' or one of its dependencies. The system is unable to remove the specified file.
I tried to clean .net and re - install, but I still get this error.
Anyone know why?
Try a system restore before the problem started:
http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restoreIf it does restore before installing the updates, try to install the updates one at a time to see if there is a conflict and hide the update if necessary.
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
-
I understand that the watch ntbtlog.txt file drivers loaded during the startup process. I'm worried when it shows driver loaded, but it is not a list. Why is this?
Hello
Yes, it can be in hidden files that may cause by the virus.
I also suggest you to see link and check.
Show hidden files
http://Windows.Microsoft.com/en-us/Windows7/show-hidden-files
-
The Windows Vista startup disk crashes after the screen "loading files".
I am trying to install Windows Vista on a new computer. The computer recognizes the boot disk and I can go beyond the "Loading files" screen, but when I get to the screen that looks like the standard login screen, the menu to install Windows never appears. The display will be just what it was. Any help would be appreciated.
Hello Trey
I suggest you see if there is an update of the bios for the motherboard. You can also check out the link below and see the suggestion given by Tim Quan. -
(Dell) Windows 7 Home Prem OA: Please HELP! Windows is loading files.
To the right,.
Since my brother was playing around with my computer and play Minecraft, I got a screen that says: "Windows loading files. I tried almost everything, and I'm desperate. I watched a lot of things that still doesn't work. Repeativly F8 at startup, F10, F12 and nothing. The thing is, whenever I have turn the computer back on, there is no commissioning. The screen will appear just by these words: "Windows is loading files," and a white bar at the bottom. I see no symbol start like HP or DELL. I see no screen connection. I tried unplugging and reconnecting TAB, CTR, ALT, DELETE, put highlighted with arrows keys and down and clicking on ENTER. EVERYTHING. He has also been disconnected from the internet for several months and I can't use the disc slot.I have also all my photos, songs, videos, work, life and data on this computer. I NEED A WAY TO REPAIR THIS COMPUTER WITHOUT LOSING ALL MY STUFF! Please, please, please help!
Thank you!Since your computer laptop is a Dell, I highly recommend going to Dell Community support.
It's the HP product HP consumer support forum.
-
Hey all,.
I have a user running windows Xp Professional with service pack 3. The user gets the following error message when it connects to the computer every morning. "Error: could not load file or assembly ' WMIControlLibrary, Version = 1.0.0.0, Culture = neutral, PublicKeyToken = null ' or one of its dependencies. The system cannot find the specified file. The only thing that seems to not work is calendar Office Print Wizard. I deleted this file and the problem persists. Also, I have not found anything in the case where the viewer that relates to this error. The only mistake I found was an issue with the .net framework. I removed all the facilities framework and their updates. Restarted the computer and ther error disappeared and was replaced by errors in programs that require this file to work. I reinstalled .net framework 2 and returns the error. I left all the machine off separation executives. I did a repair on the .net framework without change. I'm not quite sure that the .net framework is the problem though. I guess that if just. At this point I don't know where to go from here how to solve this problem. Anyone got ideas?
Hi tripleb316,
· Did you do changes on the computer before the show?
Follow these methods.
Method 1: Follow these steps:
Step 1: Start the computer in safe mode and check if the problem persists.
A description of the options to start in Windows XP Mode
http://support.Microsoft.com/kb/315222
Step 2: If the problem does not still in safe mode, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353
Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.
After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.
(a) click Start, run.
(b) type msconfigand click OK.
(c) the System Configuration Utility dialog box appears.
(d) click the general tab, click Normal startup - load all services and device drivers and then click OK.
(e) when you are prompted, click on restart to restart the computer.
Method 2: Scan the file system (CFS) auditor to repair corrupted files.
Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)
-
Update not load files from InDesign CC 2015.2
Since the update to InDesign CC 2015.2 v11.2.0.99 on my macbook, InDesign load files, or allow me to create new documents. When I double click on a document plays its animation, but nothing actually loads Startup icons in InDesign. When I go to create a new document, change my presets and press ok, nothing happens again.
Anyone got any ideas as to why this would happen? I tried uninstalling InDesign (app removed the preferences) and reinstall, but it made no difference.
Any help would be greatly appreciated.
-
Photoshop CS6 caution open the same file at startup
I'm on Photoshop CS6 13.1.2 on a MacPro 2010 mid running OS / X 10.8.3. Whenever I start it also opens an image .psb file which has been recently editing in Photoshop. I don't want to open at startup.
I tried:
1. close the tab
2. file/close
then leave Photoshop and start upward. The sill of file load.
3 command-Option-shift at startup to reset Photoshop. The stil file load.
How to stop this file will load automatically at startup?
It looks like an orphaned AutoRecover file. Next time it opens, right-click on the document tab, and choose reveal in Finder. Close Photoshop, trash the file then restart Photoshop to find that the pest is gone.
-
This has happened to me for a while now.
I start the computer, if I forced mode it asks if I want to get into the Safe Mode, Mode safe mode with networking or normally.
I usually go on the network in safe mode, because of the error on blue screen on Normal I have to fix ABC.
He says "Windows is loading files", does microsoft thingy loading then the screen becomes larger, as if it was in safe mode, but it will start up repair.... Research of the problems... Windows cannot repair this computer automatically... For the 40th time. "If you have recently attached a device to this computer, such as a camera or music mobile game -" Hey... I just want to play Xbox Live.
I'm done, it restarts and repeats continuously.
I tried all the stuff the other forums effing threw on me, but they were not much help.It's the Toshiba forums, I should have here tried everything first... but can someone PLEASE help me?
Hello
Using Win 7?
Usually the Win 7 and Vista as well supports some repair options.
Start Notepad, press F8, and then choose the first option called fix my computer.
There you should find some settings of repair.I worst case you could recover the laptop using a HARD drive recovery option (located in the repair of my computer if available) or you can use your Toshiba Recovery disk to reinstall the operating system.
Welcome them
-
Could not load file or assembly ' NationalInstruments.VisaNS, Version = 8.9.20.108
I have an app VS c# that references the assembly OR world. It worked fine in 32-bit Windows XP environment. However, when I installed and ran the application in the Windows 7 64-bit environment. The app was the following text:
System.IO.FileNotFoundException: Could not load file or assembly 'NationalInstruments.VisaNS, Version = 8.9.20.108, Culture = neutral, PublicKeyToken = 4544464cdeaab541' or one of its dependencies. The system cannot find the specified file.
"File name: ' NationalInstruments.VisaNS, Version = 8.9.20.108, Culture = neutral, PublicKeyToken = 4544464cdeaab541"Where can I find this assembly file version and why did not he ask you when I ran into the Windows XP 32-bit platform? It's the same application binary.
Thanks for your help!
Another reason, you can get this error if you have your target, the value 'Any CPU' platform in the project properties. "Any CPU" setting causes the application runs in 32-bit on a 32-bit system and 64-bit on a 64 bit system mode. It would be a problem or a 64-bit system because you don't have the 64-bit installed assemblies and a 64-bit application cannot load a 32-bit assembly. You must change this setting to 'x 86' which will force to run in 32-bit mode on 32-bit and 64-bit systems.
-
I'm fighting this problem for days (euphemism)...
I used to work, but now isn't an installation package. I tried to install and run the program on a couple of computers and the program hangs when loading the Dll NI. I put everything ' x 86.
The list of dependencies in VS2010 is illustrated in the attatched screenshot.
The text of the mistake of trying to run the application on the target computer is lower in italics.
Of course, I could use some help on this! Thanks in advance.
See the end of this message for details on the call
just-in-time (JIT) debugging instead of this dialog box.The exception text *.
System.IO.FileNotFoundException: Could not load file or assembly 'NationalInstruments.DAQmx.dll' or one of its dependencies. The specified module could not be found.
File name: "NationalInstruments.DAQmx.dll."
at IPClientTest.MTF_Supervisor.mainSstart13)
at IPClientTest.MTF_Supervisor.mainStartByParts)
at IPClientTest.MTF_Supervisor.lblSelfTest_Click (Object sender, EventArgs e)
at System.Windows.Forms.Control.OnClick (EventArgs e)
at System.Windows.Forms.Control.WmMouseUp (Message & m, MouseButtons, Int32 clicks button)
at System.Windows.Forms.Control.WndProc (Message & m)
at System.Windows.Forms.Label.WndProc (Message & m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage (Message & m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc (Message & m)
at System.Windows.Forms.NativeWindow.Callback (IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)Loading assemblies *.
mscorlib
Assembly version: 4.0.0.0
Win32 Version: 4.0.30319.34011 built by: FX45W81RTMGDR
Code: file:///C:/Windows/Microsoft.NET/Framework/v4.0.30319/mscorlib.dll
----------------------------------------
MTF_Supervisor
Assembly version: 1.0.3.3
Win32 version: 1.0.3.03
Code: file:///C:/mtfDebug/MTF_Supervisor.exe
----------------------------------------
System.Windows.Forms
Assembly version: 4.0.0.0
Win32 Version: 4.0.30319.33440 built by: FX45W81RTMREL
Code: file:///C:/windows/Microsoft.Net/assembly/GAC_MSIL/System.Windows.Forms/v4.0_4.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
----------------------------------------
System.Drawing
Assembly version: 4.0.0.0
Win32 Version: 4.0.30319.33440 built by: FX45W81RTMREL
Code: file:///C:/windows/Microsoft.Net/assembly/GAC_MSIL/System.Drawing/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
----------------------------------------
System
Assembly version: 4.0.0.0
Win32 Version: 4.0.30319.34003 built by: FX45W81RTMGDR
Code: file:///C:/windows/Microsoft.Net/assembly/GAC_MSIL/System/v4.0_4.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
MTF_ClassLib
Assembly version: 1.0.1.0
Win32 version: 1.0.1.0
Code: file:///C:/mtfDebug/MTF_ClassLib.DLL
----------------------------------------
NationalInstruments.UI.WindowsForms
Assembly version: 13.0.40.242
Win32 version: 13.0.40.242
Code: file:///C:/mtfDebug/NationalInstruments.UI.WindowsForms.DLL
----------------------------------------
NationalInstruments.UI
Assembly version: 13.0.40.242
Win32 version: 13.0.40.242
Code: file:///C:/mtfDebug/NationalInstruments.UI.DLL
----------------------------------------
NationalInstruments.Common
Assembly version: 13.0.40.188
Win32 version: 13.0.40.188
Code: file:///C:/windows/Microsoft.Net/assembly/GAC_MSIL/NationalInstruments.Common/v4.0_13.0.40.188__dc6ad606294fc298/NationalInstruments.Common.dll
----------------------------------------
System.Web
Assembly version: 4.0.0.0
Win32 Version: 4.0.30319.34009 built by: FX45W81RTMGDR
Code: file:///C:/windows/Microsoft.Net/assembly/GAC_32/System.Web/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Web.dll
----------------------------------------
System.Core
Assembly version: 4.0.0.0
Win32 Version: 4.0.30319.33440 built by: FX45W81RTMREL
Code: file:///C:/windows/Microsoft.Net/assembly/GAC_MSIL/System.Core/v4.0_4.0.0.0__b77a5c561934e089/System.Core.dll
----------------------------------------
NationalInstruments.Common.Native
Assembly version: 13.0.40.188
Win32 version: 13.0.40.188
Code: file:///C:/windows/Microsoft.Net/assembly/GAC_32/NationalInstruments.Common.Native/v4.0_13.0.40.188__dc6ad606294fc298/NationalInstruments.Common.Native.dll
----------------------------------------
System.Xml
Assembly version: 4.0.0.0
Win32 Version: 4.0.30319.33440 built by: FX45W81RTMREL
Code: file:///C:/windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------
System.Design
Assembly version: 4.0.0.0
Win32 Version: 4.0.30319.33440 built by: FX45W81RTMREL
Code: file:///C:/windows/Microsoft.Net/assembly/GAC_MSIL/System.Design/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Design.dll
----------------------------------------
Accessibility
Assembly version: 4.0.0.0
Win32 Version: 4.0.30319.33440 built by: FX45W81RTMREL
Code: file:///C:/windows/Microsoft.Net/assembly/GAC_MSIL/Accessibility/v4.0_4.0.0.0__b03f5f7f11d50a3a/Accessibility.dll
----------------------------------------Salvation Lorne.V.,.
Exactly how you install OR DAQmx on the target computers? Even if you include the DAQmx merge module in your version, you always need to install DAQmx on the target machine separately.
You can also confirm that the DAQmx.dll is installed in the same directory on the development and deployment of the machines? And you have the same version of DAQmx on both machines?
Kind regards
-
Could not load file or Assembly runtime being more recent than currently loaded run time
I've recently upgraded to TestStand 2010 and Visual Studio 2010 TestStand 4.2.1 and Visual Studio 2008. I now get the following error in the analysis of the sequence for all calls to my .net dll.
"Step"My_StepType"not loadable module. Could not load file or Assembly or one of its dependencies. This Assembly is built by a runtime newer than the runtime currently loaded and cannot be loaded. »
I don't know how LONG it is. All of this worked previously. I tried to go back to the dll, but that makes no difference.
Any ideas?
Thank you.
I found where this topic is discussed in detail a bit more. It is in the TestStand reference manual that is installed with TS. TS 2010 it's on page 5-12 and the section labeled using .NET Framework under section adapter .NET of Chapter 5 (Module adapters).
-
Could not load file or assembly NationalInstruments.DAQmx
I get an error 'Could not load file or assembly NationalInstruments.DAQmx' when I put my application on another computer. The only difference between the two computers that I can say is that one that doesn't use the 64-bit Windows version and one who does has the 32-bit version.
DAQmx exists on the computer and I can control the acquisition of data through the Explorer measurement & cutting automation.
Any suggestions?
Thank you
Garth
I solved the error by downloading the latest version of DAQmx on computers and recompiling code using the most recent version.
-
He saids load files from memory to print later in my print spooler how to get out or remove it
my printer will not print when I services, then in this print spooler TI saids load files into memory to be printed later.how have removed that my printer can print
Hi Jorgecajigas,
1. What is the operating system installed on your computer?
2. What is the brand and model of your printer?
3 is enabled, the print spooler service?
4 are you facing this problem with a particular application?
5. you receive an error message when you try to print?You cannot change or remove the description of print spooler. The message you get in the description box is just tells you what the purpose of the service. To solve the problem on the printer does not print you can follow the steps and check if it helps.Follow the link and check if that helps.
Printer in Windows problems -
I have a computer on my network when you open web files WSS 3 in SharePoint Designer 2007, I get the error 'could not load file or assembly 'sorttbls.nlp' or one of its dependencies. The system cannot find the specified file. "I have looked through some forms on the web and have concluded that this is a problem of .NET Framework 2, but I have not managed to solve the problem. He also seems to be keep me to load the Update Services administration console on a workstation by using MMC. Other posts on my network can open/edit SharePoint web site files in SharePoint Designer 2007 without this error and open the Administrative Update Services console withpout errors. I tried a repair on .NET 2. Anyone have any suggestions on another approach to fixing .NET?
Thanks for your suggestions.
Jeff
Hello
-What is the operating system installed on your computer?
Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public.
Please ask your question in the Forum on TechNet Support. You can follow the link to your question:
http://social.technet.Microsoft.com/forums/en-us/sharepointgeneral/threads
Maybe you are looking for
-
Windows 7, had to change the user profile lost all my info from Thunderbird. Help, please.
Worm or virus caused me to have to change my user profile in Windows 7. I have everything back to looking more or less as he did before this disaster on my computer and I am once again able to do in Internet Explorer, but when I go to my Thunderbird
-
I automatically update my Firefox, but some Internet sites say resolutely I use an "outdated browser", such as Youtube, Myspace, Bandcamp and even (I just discovered) Feedback of Firefox own link. They make an assumption based on the fact that I stil
-
After the latest OS enhancements I have intermittent problems, but frequently with links that don't open, browser freezes, slowness and inability to move the screen elements similar to many other reports currently on this forum. These have an impact
-
Open Directory: Cannot add users remotely
I have questions, adding users to Open Directory of the Server app. It happens when I connect to the remote server, not when I'm on the service computer itself. After adding a user, I get: Operation is not supported by the node directory. I looked ar
-
When a computer XP starts, the following errors occur. Can't find Mac addresses, can't find DHCP at startup. PC is not connected to a network. Why would it gives this error at startup?