Loading with iPhone display off / sleep

Similar Questions

• I5screen W700 keeps dimming (with gradation display off)

  I set the Max screen brightness (I love my screens to be as bright as I can), but for some reason, no matter what I do (including them turn off screen dimming) he maintains in gradation occasionally and I find myself with a screen dark light as I've got low light. Sometimes it works and I'm having a brilliant screen another time sound really dim. Any suggestions?

  by disabling the dimming, you do charm bar, settings, change the setting, general, under the screen of pc have you turn off automatically set the brightness of my screen...

• iPhone 5s stuck on the loading with the apple logo bar

  my iphone 5 s is currently blocked on the loading with the apple logo bar, my home button does not work (I normally use assisstive-touch), ive tried connecting my phone to a laptop and then connect to itunes, but when I connect to itunes it say «to allow access, answer on your iphone» I don't know what to do and need my phone. Help, please.

  You must get the repaired Home button in order to connect to iTunes to sync or restore data.

  Help here > repair - official Apple iPhone Support

• Sync to iphoto with Iphone hangs on during synchronization. In addition the google map can be charged when I click on the places of Mediathek. Error message: "this page has not loaded correctly Google Maps. See the JavaScript console for more technical de

  Sync to iphoto with Iphone hangs on during synchronization. In addition the google map can be charged when I click on the places of Mediathek. Error message: "this page has not loaded correctly Google Maps. See the JavaScript console for more technical details. »

  Perhaps the reason for the problem of synchronization is the problem with the loading of google map?

  Error message: "this page has not loaded correctly Google Maps. See the JavaScript console for more technical details. »

  Apple has not renewed the contract with Google to access Google servers.

  If the old version of iPhoto, which are still using Google's servers for the cards and places are either crashing or hanging.  Places are only work in iPhoto 9.5.1 or newer, who use places of Apple servers.

  There is more support for iPhoto from Apple.  You must update iPhoto 9.5.1 with the Mavericks. It would work well, only it is no longer buying this update to Apple.

  Perhaps the reason for the problem of synchronization is the problem with the loading of google map?

  It is very likely.  If iPhoto work very well when you are offline, then your problems will be caused by the connection failed to Googles servers.

  See this: Bug: iPhoto 9.4 crashing when viewing the scene

• I recently bought an iPhone 6s I have loaded with my iTunes support information (old phone an iPhone 5). Problem is that I now have a replica on both phones I have an Apple ID - how to change the apple on the new ID

  I recently bought an iPhone 6s I have loaded with my iTunes support information (old phone an iPhone 5). Problem is that I now have a replica on both phones I have an Apple ID - how to change the apple on the new ID

  What do you mean by 'repetition '?

  You use two phones? Or did you give the old phone to someone else? If you use two phones, one ID on both Apple is probably than most people. Before you give or sell an iOS device, you must sign in iCloud in settings > iCloud and restore the device as good as new.

• When I wake up the computer in "sleep" or "hibernate" mode, only the photo Office rises, not the icons, so I have to restart with a hard off every time. What can I do?

  When I wake up the computer in "sleep" or "hibernate" mode, only the photo Office rises, not the icons, so I have to restart with a hard off every time.  What can I do?

  Press CTRL + ALT + DELETE and bring up the Task Manager > move in process > select Explorer > end task and it will restart and if all goes well it will bring to the top of your screen properly.

  Your computer is completely up-to-date with all the updates?

  Note I'm not a fan of setting hibernation or sleep a computer there, it can sometimes lead to problems (as you see)

  I hope this helps.

• loading slow iphone ipad and 6 Air since IOS9 last updated

  Since the update, my iphone IOS9 6 and ipad Air are recharged very slowly, I turned off all the juice sucking apps etc and there is still no improvement, ideas please?

  Install battery life: check the internal battery statistics on the... - iTunes and check the current load with your current charger. Then try another charger and check the intensity again to see if there is something wrong with your charger/lightning cable.

• How to use the headphones cable and load on iphone 7?

  I am very interested in th new IPhone but I'm not clear on how couldn't I maintain the main use that I have now with it.

  In many cases, I use my headset while I load the Iphone:

  -audio conversation at the end of the day when the battery is low and he needs to reload

  -When chat or listen to music while using my phone as a modem, with usb cable (otherwise as this function drains the battery quickly impossible)

  Also, I tried to use a Bluetooth headset but frankly I prefer questions from the cable to the battery ones (always unloaded when you have an important conference call) and the sound quality not so good

  So the question is simple: Apple will offer, for a reasonable price, a lightweight port Doubler ? It's the only solution I see, even if painful compared to the current iPhone (risk of losing the adapter, may not be comfortable in a Pocket / may damage the Iphone port...)

  Ulysse311 wrote:

  .. So the question is simple: Apple will offer, for a reasonable price, a lightweight port Doubler ?...

  Hello

  It is a community of support based on the user.

  If you wish to submit comments or suggestions to Apple, you can do it here:

  https://www.Apple.com/feedback/iPhone.html

• I need to print from firefox icon as I used, because some pages that I need to print do not load with the menu.

  Since a recent automatic update, I was not able to print by clicking on the firefox tab icon. I have pages that I need to print, that do not load with the toolbar complete with the key of menu etc. I could always print by clicking on the icon, but no more. Help please.

  you could try pressing and use 'ctrl' then 'P' on your keyboard
  We also write 'ctrl + P', it's the printing system wide combination of shortcut keys.

  Alternatively, you can try, right-click in the title bar (where your loading tabs) and selecting 'Menu Bar', which will show the menu bar (with file, editing, display, etc.) on the tabs allowing you to print from the submenu file

  hope that helps!

  See you soon

• Reading/Controlling Arduino with iPhone Dashboard

  Hello

  I'm new using Dashboard OR so please bear with me.

  I'm working on the installer is a TCP/IP connection between my computer and an Arduino with WiFi shield. The computer has a VI that connects to the Arduino, currently the Arduino is the server and receives data from sensors that it displays in graphics and medium. VI also adjustable a yellow and Red limits for data from the sensor, and when the latter is reached, a stop test command is sent to the Arduino.

  I am trying to add a smartphone to the current configuration. Initially, I had planned to write an application with a custom telnet but I thought that the dashboard could better work (such as graphics display). I downloaded the dashboard for iPhone but were unable to establish a connection to the Arduino when it is not connected to the computer VI. The connection itself has no effect on the side of the iPhone app shows continually links and nothing else. The only way I know that a connection has been established, it's that the Arduino is defined in the light of an LED only when connected.

  I have three major concerns are:

  1. are there any documents to be able to use the dashboard with iPhone? If not, is the iPhone Dashboard more limited than the dashboard iPad for which there is of the documents? I have not been able to find a lot of documentation for dashboard with iPhone, iPad only (http://www.ni.com/white-paper/13757/en/).

  2. relying on Q1. is it possible to add controls to the iPhone (I have to be able to send a command to stop the phone if the installation should work) of dashboard?

  3 should. the dashboard be connected to a computer running a VI? My original plan to was to directly connect to the Arduino. skip the command stop via the computer, it is doable but diverted.

  Hope to hear from you,
  Yusif Nurizade

  The version of the phone has 'charts', but not 'graphics '. In LabVIEW terminology this means that you can see the latest data and history, but history is stored locally in this table (not the server). You will see that the history of data points that your client has received. In the version of phone we also do support the scalar data types, which means that you can see only one of the data point. Basically, this means that it is not enough for streaming of signals. The dashboard will update the table by adding a single fixed-rate data point (as described here: http://digital.ni.com/public.nsf/allkb/DF058CF63BC25E29862579EB0062E828). No matter what the server made the dash displays only data to the fixed rate, and it will drop all intermediate values arriving between the last update and the next update. It should only be used to see a preview of the last value and certain values passed.

  There are several ways to see the differences between the versions, but perhaps not in the form that you are missing. First of all, this page describes the data types supported for each version:

  http://digital.NI.com/public.nsf/allkb/D9B247551BE7F46A8625795000552CDE

  This page shows the new features available in version 2.x (which is available on the tablets):

  http://www.NI.com/white-paper/14033/en/

  Whatever it is described as a new feature on this page is not available in versions of phone, which are based on the 1.0 version of the application.

  "2. my current setup is Arduino as the server and the client computer. I have to back to allow the phone access to the data on the computer? "You said that theDashboard does not need to delve into TCP/IP at low altitude, so I wonder if there is a way to connect to the VI computer without involving the Arduino or reversal of the client-server relationship.

  I'm assuming that the data that you actually care comes from the Arduino, so at some level, the Arduino could still be considered a server. The concept of client and the server gets a little fuzzier when you introduce an intermediary, i.e. what would be your LabVIEW application. From the point of view of the Arduino the LabVIEW application would be a customer (it connects to the Arduino). From the point of view of the phone the LabVIEW application is the server (the phone connects to it). How your application is connect to the Arduino using its Protocol, acquire all relevant data, convert it to an appropriate data type and publish it in a way that is accessible to the application of data dashboard (i.e. a shared variable or a web service).

• came loaded with Windows Vista Home Premium. Recently, I reformatted the hard drive and did a clean installation of Windows 7 Professional. I have no games. No solitaire, Minesweeper, no nothing.

  original title: lack of games
  I have an Acer Aspire PC. It came loaded with Windows Vista Home Premium. Recently, I reformatted the hard drive and did a clean installation of Windows 7 Professional.

  I have no games. No solitaire, Minesweeper, no nothing.
  How can I, without seeking to erase and reinstall again?

  To activate the built-in Windows 7 games:

  1. click on Start (lower-left) and then on Control Panel.

  2. click on programs and features.

  3. on the left side of the screen, click on 'Windows turn features on or off".

  4. find the entry called games & check the box next to it.

  5. click on OK.

  6 reset.

  If the games box is already checked, uncheck the box , click OK, restart, then do steps 1-6 above.

• Issues with the display settings - all super tiny

  I have problems with the display settings, all of a sudden, everything was super great and difficult to see all the toolbars on the screen, I went to the settings display, and somehow managed to make everything incredibly tiny.  I found a page via the display settings (avancΘs?) that allowed me to adjust the percentage of the elements on the screen.  I reduced to 40%, and then the setting stuck and now I can not see or read anything.  I'm trying to return to the display settings, but I can't find this 'page' which allowed me to make this change.

  I saw a similar post:

  "I messed up my display settings. my resolution is so great that I don't see anything but black vertical lines and sets of 3 white dotted lines in sequence across my screen. my mouse can not be seen either. is there anyway to restore my original settings? It's as if everything is bigger there should be 200 to 300%.

  Hello

  There are a few things you can try:

  1. reboot the PC then start tapping the F8 key until you get the Windows Advanced on-screen Menu of Options.

  Then choose "last good known Configuration". Allow Windows to start.

  2. restart PC then start tapping the F8 key until you get the Windows Advanced on-screen Menu of Options.

  Then choose "Enable VGA Mode". Windows XP loads with the color values that can handle your "lower" resolution and display driver Once in Windows, change the resolution, then restart the PC.

  3. try to go into "Safe Mode", which is accessible in the same way as "VGA Mode". "Review the same routine as no. 2.

  I tried to hit F8, but nothing happens, I tried to reboot several times.  How do the Advanced Options?  Someone knows it the screen that I talk with the possibility of adjusting the percentages, how can I find it again?  So I can not really read or see anything.

  Hi fixxazd,

  For instructions on starting in the advanced system recovery options, see the following articles:

  A description of the options to start in Windows XP Mode

  Advanced Troubleshooting for General startup problems in Windows XP

  See also:

  How do advanced clean boot troubleshooting in Windows XP

• After the spysweeper program Sidebar gadgets update not load, run or display

  Original title: windows sidebar gadgets Google; How can I do to load and examine correctly as installed on windows vista? I've recently updated my spysweeper program, but now my base that all gadgets do not load and run/display. How can this be repaired?

  Basic windows vista gadgets installed on my windows do not display or load correctly. I tried all the ordinary means to install, add gadgets, but as the clock gadget only show a 'black' clock that I can't change to the format of the regular clock.  Same thing with the other gadgets.  How these gadgets can be restored to their operations and original looks?

  Hello

  Method 1.
  To restore the default gadgets that are installed with Windows Vista, use the following steps:
  a. right click on an empty area in the Windows pane, and then click Properties.
  b. click on Restore gadgets installed with Windows.
  c. click OK.

  Method 2.
  This behavior is observed if the XML registration is missing in the system. To resolve this issue, follow these steps:

  a. close Windows Sidebar, to do so, right-click on the Sidebar icon in the Notification area and click on leave.
  b. open a high command prompt window to do, click Start, click principally made programs, click Accessories, right click Guest and then click Run as administrator.
  d. in the command prompt window, type the following command and press ENTER:

  regsvr32 msxml3.dll

  Similarly, run these commands:

  regsvr32 scrrun.dll

  regsvr32 jscript.dll

  e. close the command prompt and restart the computer and check.

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• "A problem with the display driver.

  Recently, I get an error message whenever I open Photoshop CS4. It reads as follows.

  "As Photoshop has encountered a problem with the display driver and has temporarily disabled GPU enhancements. Visit the Web site of the manufacturer of the video card for the latest version of the software.

  "GPU improvements can be enabled in the Performance preferences panel."

  I checked the graphics cards in Device Manager, and when I tried to update the software, it told me that I was aware.

  • OS: Vista Edition Home Premium
  • Dell Inspiron 1520
  • Display driver: NVIDIA GeForce 8400 M GS

  Sincerely, Danny

  Hello

  Try to update your display manually driver and do not use the analysis of the drivers on the manufacturer's website either.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system. For
  each driver in the list, additional useful information is displayed: load address of the driver, description,.
  version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
  video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
  cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
  own the software and drivers and all other main drivers that you have.

  Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
  (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
  updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Always check in the Device Manager - tab drivers version you install actually shows up. This
  because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
  pilot - reboot - check that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• Help with conditional display and Validation

  Version 4.1.1.00.23

  Hello

  I'm having a difficult time with a conditional display and validation, I hope someone can help with.

  Requirements:

  When (Datepicker) Start Date or the end Date (Datepicker) change can display the reason for change (select list) and change Description (Textbox)
  If the page is saved without entering a reason change display an error message of validation that the reason for the change cannot be empty (NULL)

  What I tried

  Create a dynamic Action on the Start Date

  Event: Change

  Selection type: Article (s)

  Items (s): P51_START_DATE

  Condition: no

  Real Action Section:

  Action: Show

  Fire on Page load: Checked

  Display all the elements of the page on the same line: NO.

  Section of the elements concerned:

  Selection type: Article (s)

  Product (s): P51_CHANGE_REASON, P51_CHANGE_DESC

  I also created a dynamic Action with similar settings for the P51_END_DATE.

  I created a Validation for the P51_CHANGE_REASON as a function return error text:

  DECLARE
      v_start_date    work_items.start_date%TYPE;
      v_end_date      work_items.end_date%TYPE;
  BEGIN
      SELECT start_date
            ,end_date
      INTO   v_start_date
            ,v_end_date
      FROM   work_items
      WHERE  work_items_id = :P51_WORK_ITEMS_ID;
      IF ( (v_start_date != TO_DATE(:P51_START_DATE,'DD-MON-YYYY') OR v_end_date != TO_DATE(:P51_END_DATE,'DD-MON-YYYY') ) AND
            :P51_CHANGE_REASON IS NULL ) THEN
          RETURN 'Change Reason must have a value';
      END IF;
  END;
  
  
  

  The question

  I tried to create another dynamic Action to hide the P51_CHANGE_REASON and P51_CHANGE_DESC fields during the loading of the page, but when the date fields are changed and the validation is fired the P51_CHANGE_REASON and the P51_CHANGE_DESC are hidden again.

  There are two buttons to send the page: 'SAVE' will submit the page and stay on the page and 'SAVE_CHANGES' will present the page and creates a branch to the previous page (which is a relationship with the EDIT buttons to change recording).

  I can not loading the dynamic Action page for fires DO NOT when validation is triggered.

  I hope it is clear and if not what information can I provide?

  Thank you

  Joe

  Which the condition is failing and what browser? I tested it in Firefox and it works as it should. Can you confirm that?